target/linux/ramips/dts/mt7620a_planex_mzk-750dhp.dts

   1 #include "mt7620a.dtsi"
   2
   3 #include <dt-bindings/gpio/gpio.h>
   4 #include <dt-bindings/input/input.h>
   5
   6 / {
   7         compatible = "planex,mzk-750dhp", "ralink,mt7620a-soc";
   8         model = "Planex MZK-750DHP";
   9
  10         aliases {
  11                 led-boot = &led_power;
  12                 led-failsafe = &led_power;
  13                 led-running = &led_power;
  14                 led-upgrade = &led_power;
  15         };
  16
  17         leds {
  18                 compatible = "gpio-leds";
  19
  20                 wps {
  21                         label = "green:wps";
  22                         gpios = <&gpio2 15 GPIO_ACTIVE_LOW>;
  23                 };
  24
  25                 led_power: power {
  26                         label = "green:power";
  27                         gpios = <&gpio1 15 GPIO_ACTIVE_LOW>;
  28                 };
  29
  30                 wlan5g {
  31                         label = "green:wlan5g";
  32                         gpios = <&gpio1 14 GPIO_ACTIVE_LOW>;
  33                 };
  34         };
  35
  36         keys {
  37                 compatible = "gpio-keys";
  38
  39                 s1 {
  40                         label = "reset";
  41                         gpios = <&gpio0 1 GPIO_ACTIVE_LOW>;
  42                         linux,code = <KEY_RESTART>;
  43                 };
  44
  45                 s2 {
  46                         label = "wps";
  47                         gpios = <&gpio2 19 GPIO_ACTIVE_LOW>;
  48                         linux,code = <KEY_WPS_BUTTON>;
  49                 };
  50         };
  51 };
  52
  53 &gpio1 {
  54         status = "okay";
  55 };
  56
  57 &gpio2 {
  58         status = "okay";
  59 };
  60
  61 &spi0 {
  62         status = "okay";
  63
  64         flash@0 {
  65                 compatible = "jedec,spi-nor";
  66                 reg = <0>;
  67                 spi-max-frequency = <10000000>;
  68
  69                 partitions {
  70                         compatible = "fixed-partitions";
  71                         #address-cells = <1>;
  72                         #size-cells = <1>;
  73
  74                         partition@0 {
  75                                 label = "u-boot";
  76                                 reg = <0x0 0x30000>;
  77                                 read-only;
  78                         };
  79
  80                         partition@30000 {
  81                                 label = "u-boot-env";
  82                                 reg = <0x30000 0x10000>;
  83                                 read-only;
  84                         };
  85
  86                         factory: partition@40000 {
  87                                 compatible = "nvmem-cells";
  88                                 label = "factory";
  89                                 reg = <0x40000 0x10000>;
  90                                 #address-cells = <1>;
  91                                 #size-cells = <1>;
  92                                 read-only;
  93
  94                                 eeprom_factory_0: eeprom@0 {
  95                                         reg = <0x0 0x200>;
  96                                 };
  97
  98                                 macaddr_factory_4: macaddr@4 {
  99                                         reg = <0x4 0x6>;
 100                                 };
 101                         };
 102
 103                         partition@50000 {
 104                                 compatible = "denx,uimage";
 105                                 label = "firmware";
 106                                 reg = <0x50000 0x7b0000>;
 107                         };
 108                 };
 109         };
 110 };
 111
 112 &state_default {
 113         gpio {
 114                 groups = "i2c", "spi refclk", "rgmii1", "nd_sd";
 115                 function = "gpio";
 116         };
 117 };
 118
 119 &ethernet {
 120         pinctrl-names = "default";
 121         pinctrl-0 = <&ephy_pins>;
 122
 123         nvmem-cells = <&macaddr_factory_4>;
 124         nvmem-cell-names = "mac-address";
 125
 126         mediatek,portmap = "llllw";
 127 };
 128
 129 &wmac {
 130         nvmem-cells = <&eeprom_factory_0>;
 131         nvmem-cell-names = "eeprom";
 132 };
 133
 134 &pcie {
 135         status = "okay";
 136 };
 137
 138 &pcie0 {
 139         mt76@0,0 {
 140                 reg = <0x0000 0 0 0 0>;
 141                 mediatek,mtd-eeprom = <&factory 0x8000>;
 142         };
 143 };