target/linux/ramips/dts/3G-6200N.dts

   1 /dts-v1/;
   2
   3 #include "rt3050.dtsi"
   4
   5 #include <dt-bindings/gpio/gpio.h>
   6 #include <dt-bindings/input/input.h>
   7
   8 / {
   9         compatible = "edimax,3g-6200n", "ralink,rt3050-soc";
  10         model = "Edimax 3g-6200n";
  11
  12         aliases {
  13                 led-status = &led_power;
  14         };
  15
  16         cfi@1f000000 {
  17                 compatible = "cfi-flash";
  18                 reg = <0x1f000000 0x800000>;
  19                 bank-width = <2>;
  20                 device-width = <2>;
  21
  22                 partitions {
  23                         compatible = "fixed-partitions";
  24                         #address-cells = <1>;
  25                         #size-cells = <1>;
  26
  27                         partition@0 {
  28                                 label = "u-boot";
  29                                 reg = <0x0 0x30000>;
  30                                 read-only;
  31                         };
  32
  33                         partition@30000 {
  34                                 label = "u-boot-env";
  35                                 reg = <0x30000 0x10000>;
  36                                 read-only;
  37                         };
  38
  39                         factory: partition@40000 {
  40                                 label = "factory";
  41                                 reg = <0x40000 0x10000>;
  42                                 read-only;
  43                         };
  44
  45                         partition@3e0000 {
  46                                 label = "cimage";
  47                                 reg = <0x3e0000 0x20000>;
  48                                 read-only;
  49                         };
  50
  51                         partition@50000 {
  52                                 label = "firmware";
  53                                 reg = <0x50000 0x390000>;
  54                         };
  55                 };
  56         };
  57
  58         gpio-leds {
  59                 compatible = "gpio-leds";
  60
  61                 led_power: power {
  62                         label = "3g-6200n:green:power";
  63                         gpios = <&gpio0 9 GPIO_ACTIVE_LOW>;
  64                 };
  65
  66                 wlan {
  67                         label = "3g-6200n:amber:wlan";
  68                         gpios = <&gpio0 14 GPIO_ACTIVE_LOW>;
  69                 };
  70
  71                 3g {
  72                         label = "3g-6200n:blue:3g";
  73                         gpios = <&gpio0 7 GPIO_ACTIVE_LOW>;
  74                         trigger-sources = <&otg_port1>;
  75                         linux,default-trigger = "usbport";
  76                 };
  77         };
  78
  79         gpio-keys-polled {
  80                 compatible = "gpio-keys-polled";
  81                 poll-interval = <20>;
  82
  83                 reset {
  84                         label = "reset";
  85                         gpios = <&gpio0 12 GPIO_ACTIVE_LOW>;
  86                         linux,code = <KEY_RESTART>;
  87                 };
  88
  89                 rfkill {
  90                         label = "wlanswitch";
  91                         gpios = <&gpio0 13 GPIO_ACTIVE_LOW>;
  92                         linux,code = <KEY_RFKILL>;
  93                 };
  94         };
  95 };
  96
  97 &pinctrl {
  98         state_default: pinctrl0 {
  99                 gpio {
 100                         ralink,group = "spi", "i2c", "jtag", "rgmii", "mdio", "uartf";
 101                         ralink,function = "gpio";
 102                 };
 103         };
 104 };
 105
 106 &ethernet {
 107         mtd-mac-address = <&factory 0x4>;
 108 };
 109
 110 &esw {
 111         mediatek,portmap = <0x2f>;
 112 };
 113
 114 &wmac {
 115         ralink,mtd-eeprom = <&factory 0>;
 116 };
 117
 118 &otg {
 119         status = "okay";
 120 };