target/linux/qualcommax/files/arch/arm64/boot/dts/qcom/ipq8071-ax3600.dtsi

   1 // SPDX-License-Identifier: GPL-2.0-or-later OR MIT
   2 /* Copyright (c) 2021, Robert Marko <robimarko@gmail.com> */
   3
   4 #include "ipq8074-512m.dtsi"
   5 #include "ipq8074-ac-cpu.dtsi"
   6 #include "ipq8074-ess.dtsi"
   7 #include <dt-bindings/gpio/gpio.h>
   8 #include <dt-bindings/input/input.h>
   9
  10 / {
  11         aliases {
  12                 serial0 = &blsp1_uart5;
  13                 led-boot = &led_system_yellow;
  14                 led-failsafe = &led_system_yellow;
  15                 led-running = &led_system_blue;
  16                 led-upgrade = &led_system_yellow;
  17                 label-mac-device = &dp2;
  18         };
  19
  20         chosen {
  21                 stdout-path = "serial0:115200n8";
  22                 bootargs-append = " root=/dev/ubiblock0_0";
  23         };
  24
  25         keys {
  26                 compatible = "gpio-keys";
  27
  28                 reset {
  29                         label = "reset";
  30                         gpios = <&tlmm 34 GPIO_ACTIVE_LOW>;
  31                         linux,code = <KEY_RESTART>;
  32                 };
  33         };
  34 };
  35
  36 &tlmm {
  37         mdio_pins: mdio-pins {
  38                 mdc {
  39                         pins = "gpio68";
  40                         function = "mdc";
  41                         drive-strength = <8>;
  42                         bias-pull-up;
  43                 };
  44
  45                 mdio {
  46                         pins = "gpio69";
  47                         function = "mdio";
  48                         drive-strength = <8>;
  49                         bias-pull-up;
  50                 };
  51         };
  52 };
  53
  54 &blsp1_uart5 {
  55         status = "okay";
  56 };
  57
  58 &prng {
  59         status = "okay";
  60 };
  61
  62 &cryptobam {
  63         status = "okay";
  64 };
  65
  66 &crypto {
  67         status = "okay";
  68 };
  69
  70 &qpic_bam {
  71         status = "okay";
  72 };
  73
  74 &qpic_nand {
  75         status = "okay";
  76
  77         /*
  78          * Bootloader will find the NAND DT node by the compatible and
  79          * then "fixup" it by adding the partitions from the SMEM table
  80          * using the legacy bindings thus making it impossible for us
  81          * to change the partition table or utilize NVMEM for calibration.
  82          * So add a dummy partitions node that bootloader will populate
  83          * and set it as disabled so the kernel ignores it instead of
  84          * printing warnings due to the broken way bootloader adds the
  85          * partitions.
  86          */
  87         partitions {
  88                 status = "disabled";
  89         };
  90
  91         nand@0 {
  92                 reg = <0>;
  93                 nand-ecc-strength = <4>;
  94                 nand-ecc-step-size = <512>;
  95                 nand-bus-width = <8>;
  96
  97                 partitions {
  98                         compatible = "fixed-partitions";
  99                         #address-cells = <1>;
 100                         #size-cells = <1>;
 101
 102                         partition@0 {
 103                                 label = "0:sbl1";
 104                                 reg = <0x0 0x100000>;
 105                                 read-only;
 106                         };
 107
 108                         partition@100000 {
 109                                 label = "0:mibib";
 110                                 reg = <0x100000 0x100000>;
 111                                 read-only;
 112                         };
 113
 114                         partition@200000 {
 115                                 label = "0:qsee";
 116                                 reg = <0x200000 0x300000>;
 117                                 read-only;
 118                         };
 119
 120                         partition@500000 {
 121                                 label = "0:devcfg";
 122                                 reg = <0x500000 0x80000>;
 123                                 read-only;
 124                         };
 125
 126                         partition@580000 {
 127                                 label = "0:rpm";
 128                                 reg = <0x580000 0x80000>;
 129                                 read-only;
 130                         };
 131
 132                         partition@600000 {
 133                                 label = "0:cdt";
 134                                 reg = <0x600000 0x80000>;
 135                                 read-only;
 136                         };
 137
 138                         partition@680000 {
 139                                 label = "0:appsblenv";
 140                                 reg = <0x680000 0x80000>;
 141                         };
 142
 143                         partition@700000 {
 144                                 label = "0:appsbl";
 145                                 reg = <0x700000 0x100000>;
 146                                 read-only;
 147                         };
 148
 149                         partition@800000 {
 150                                 label = "0:art";
 151                                 reg = <0x800000 0x80000>;
 152                                 read-only;
 153
 154                                 nvmem-layout {
 155                                         compatible = "fixed-layout";
 156                                         #address-cells = <1>;
 157                                         #size-cells = <1>;
 158
 159                                         macaddr_dp2: macaddr@6 {
 160                                                 reg = <0x6 0x6>;
 161                                         };
 162
 163                                         macaddr_dp3: macaddr@c {
 164                                                 reg = <0xc 0x6>;
 165                                         };
 166
 167                                         macaddr_dp4: macaddr@12 {
 168                                                 reg = <0x12 0x6>;
 169                                         };
 170
 171                                         macaddr_dp5: macaddr@18 {
 172                                                 reg = <0x18 0x6>;
 173                                         };
 174
 175                                         caldata_qca9889: caldata@4d000 {
 176                                                 reg = <0x33000 0x844>;
 177                                         };
 178                                 };
 179                         };
 180
 181                         partition@880000 {
 182                                 label = "bdata";
 183                                 reg = <0x880000 0x80000>;
 184                         };
 185
 186                         partition@900000 {
 187                                 /* This is crash + crash_syslog parts combined */
 188                                 label = "pstore";
 189                                 reg = <0x900000 0x100000>;
 190                         };
 191
 192                         /* Make the first rootfs a dedicated ubi partition for kernel */
 193                         partition@a00000 {
 194                                 label = "ubi_kernel";
 195                                 reg = <0xa00000 0x23c0000>;
 196                         };
 197
 198                         /* Place the real rootfs in the original second rootfs and
 199                          * expand it to the end of the nand
 200                          */
 201                         rootfs: partition@2dc0000 {
 202                                 label = "rootfs";
 203                                 reg = <0x2dc0000 0xd240000>;
 204                         };
 205                 };
 206         };
 207 };
 208
 209 &mdio {
 210         status = "okay";
 211
 212         pinctrl-0 = <&mdio_pins>;
 213         pinctrl-names = "default";
 214         reset-gpios = <&tlmm 37 GPIO_ACTIVE_LOW>;
 215
 216         ethernet-phy-package@0 {
 217                 #address-cells = <1>;
 218                 #size-cells = <0>;
 219                 compatible = "qcom,qca8075-package";
 220                 reg = <0>;
 221
 222                 qca8075_1: ethernet-phy@1 {
 223                         compatible = "ethernet-phy-ieee802.3-c22";
 224                         reg = <1>;
 225                 };
 226
 227                 qca8075_2: ethernet-phy@2 {
 228                         compatible = "ethernet-phy-ieee802.3-c22";
 229                         reg = <2>;
 230                 };
 231
 232                 qca8075_3: ethernet-phy@3 {
 233                         compatible = "ethernet-phy-ieee802.3-c22";
 234                         reg = <3>;
 235                 };
 236
 237                 qca8075_4: ethernet-phy@4 {
 238                         compatible = "ethernet-phy-ieee802.3-c22";
 239                         reg = <4>;
 240                 };
 241         };
 242 };
 243
 244 &switch {
 245         status = "okay";
 246
 247         switch_lan_bmp = <(ESS_PORT3 | ESS_PORT4 | ESS_PORT5)>; /* lan port bitmap */
 248         switch_wan_bmp = <ESS_PORT2>; /* wan port bitmap */
 249         switch_mac_mode = <MAC_MODE_PSGMII>; /* mac mode for uniphy instance0*/
 250
 251         qcom,port_phyinfo {
 252                 port@2 {
 253                         port_id = <2>;
 254                         phy_address = <1>;
 255                 };
 256                 port@3 {
 257                         port_id = <3>;
 258                         phy_address = <2>;
 259                 };
 260                 port@4 {
 261                         port_id = <4>;
 262                         phy_address = <3>;
 263                 };
 264                 port@5 {
 265                         port_id = <5>;
 266                         phy_address = <4>;
 267                 };
 268         };
 269 };
 270
 271 &edma {
 272         status = "okay";
 273 };
 274
 275 &dp2 {
 276         status = "okay";
 277         phy-handle = <&qca8075_1>;
 278         label = "wan";
 279         nvmem-cells = <&macaddr_dp2>;
 280         nvmem-cell-names = "mac-address";
 281 };
 282
 283 &dp3 {
 284         status = "okay";
 285         phy-handle = <&qca8075_2>;
 286         label = "lan1";
 287         nvmem-cells = <&macaddr_dp3>;
 288         nvmem-cell-names = "mac-address";
 289 };
 290
 291 &dp4 {
 292         status = "okay";
 293         phy-handle = <&qca8075_3>;
 294         label = "lan2";
 295         nvmem-cells = <&macaddr_dp4>;
 296         nvmem-cell-names = "mac-address";
 297 };
 298
 299 &dp5 {
 300         status = "okay";
 301         phy-handle = <&qca8075_4>;
 302         label = "lan3";
 303         nvmem-cells = <&macaddr_dp5>;
 304         nvmem-cell-names = "mac-address";
 305 };
 306
 307 &wifi {
 308         status = "okay";
 309
 310         qcom,ath11k-fw-memory-mode = <1>;
 311 };