target/linux/mediatek/patches-4.19/0304-dt-bindings-ARM-MediaTek-Document-devicetree-binding.patch

   1 From 28ec0b7e48bb27435a8b3134019b88628faf497f Mon Sep 17 00:00:00 2001
   2 From: Xiangsheng Hou <xiangsheng.hou@mediatek.com>
   3 Date: Tue, 11 Dec 2018 17:37:28 +0800
   4 Subject: [PATCH 4/6] dt-bindings: ARM: MediaTek: Document devicetree bindings
   5  for SPI NAND interface
   6
   7 Change-Id: I9ece142055ae27100da95826fb3ea1960c2994e6
   8 Signed-off-by: Xiangsheng Hou <xiangsheng.hou@mediatek.com>
   9 ---
  10  .../devicetree/bindings/spi/spi-mtk-snfi.txt  | 44 +++++++++++++++++++
  11  1 file changed, 44 insertions(+)
  12  create mode 100644 Documentation/devicetree/bindings/spi/spi-mtk-snfi.txt
  13
  14 --- /dev/null
  15 +++ b/Documentation/devicetree/bindings/spi/spi-mtk-snfi.txt
  16 @@ -0,0 +1,44 @@
  17 +MediaTek SoCs SPI NAND FLASH interface (SNFI) DT binding
  18 +
  19 +This file documents the device tree bindings for MTK SoCs SPI NAND controller.
  20 +Note that Parallel Nand and SPI NAND is alternative on MTK SoCs.
  21 +
  22 +Required properties:
  23 +- compatible:          should be "mediatek,mt7622-snfi"
  24 +- reg:                 base physical address and size of SNFI.
  25 +- interrupts:          interrupts of SNFI.
  26 +- clocks:              SNFI required clocks.
  27 +- clock-names:         SNFI clocks internal names.
  28 +- #address-cells:      NAND chip index, should be 1.
  29 +- #size-cells:         Should be 0.
  30 +
  31 +Example:
  32 +       snfi: spi@1100d000 {
  33 +               compatible = "mediatek,mt7622-snfi";
  34 +               reg = <0 0x1100d000 0 0x1000>;
  35 +               interrupts = <GIC_SPI 96 IRQ_TYPE_LEVEL_LOW>;
  36 +               clocks = <&pericfg CLK_PERI_NFI_PD>,
  37 +                        <&pericfg CLK_PERI_SNFI_PD>;
  38 +               clock-names = "nfi_clk", "spi_clk";
  39 +               ecc-engine = <&bch>;
  40 +               #address-cells = <1>;
  41 +               #size-cells = <0>;
  42 +       };
  43 +
  44 +Subnodes properties:
  45 +- Should use spi-nand framework, see Documentation/devicetree/bindings/mtd/spi-nand.txt
  46 +
  47 +Example:
  48 +&snfi {
  49 +       pinctrl-names = "default";
  50 +       pinctrl-0 = <&serial_nand_pins>;
  51 +       status = "okay";
  52 +
  53 +       spi_nand@0 {
  54 +               #address-cells = <1>;
  55 +               #size-cells = <1>;
  56 +               compatible = "spi-nand";
  57 +               spi-max-frequency = <104000000>;
  58 +               reg = <0>;
  59 +       };
  60 +};