target/linux/mediatek/image/filogic.mk

   1 DTS_DIR := $(DTS_DIR)/mediatek
   2
   3 define Image/Prepare
   4         # For UBI we want only one extra block
   5         rm -f $(KDIR)/ubi_mark
   6         echo -ne '\xde\xad\xc0\xde' > $(KDIR)/ubi_mark
   7 endef
   8
   9 define Build/mt7981-bl2
  10         cat $(STAGING_DIR_IMAGE)/mt7981-$1-bl2.img >> $@
  11 endef
  12
  13 define Build/mt7981-bl31-uboot
  14         cat $(STAGING_DIR_IMAGE)/mt7981_$1-u-boot.fip >> $@
  15 endef
  16
  17 define Build/mt7986-bl2
  18         cat $(STAGING_DIR_IMAGE)/mt7986-$1-bl2.img >> $@
  19 endef
  20
  21 define Build/mt7986-bl31-uboot
  22         cat $(STAGING_DIR_IMAGE)/mt7986_$1-u-boot.fip >> $@
  23 endef
  24
  25 define Build/mt7988-bl2
  26         cat $(STAGING_DIR_IMAGE)/mt7988-$1-bl2.img >> $@
  27 endef
  28
  29 define Build/mt7988-bl31-uboot
  30         cat $(STAGING_DIR_IMAGE)/mt7988_$1-u-boot.fip >> $@
  31 endef
  32
  33 define Build/mt798x-gpt
  34         cp $@ $@.tmp 2>/dev/null || true
  35         ptgen -g -o $@.tmp -a 1 -l 1024 \
  36                 $(if $(findstring sdmmc,$1), \
  37                         -H \
  38                         -t 0x83 -N bl2          -r      -p 4079k@17k \
  39                 ) \
  40                         -t 0x83 -N ubootenv     -r      -p 512k@4M \
  41                         -t 0x83 -N factory      -r      -p 2M@4608k \
  42                         -t 0xef -N fip          -r      -p 4M@6656k \
  43                                 -N recovery     -r      -p 32M@12M \
  44                 $(if $(findstring sdmmc,$1), \
  45                                 -N install      -r      -p 20M@44M \
  46                         -t 0x2e -N production           -p $(CONFIG_TARGET_ROOTFS_PARTSIZE)M@64M \
  47                 ) \
  48                 $(if $(findstring emmc,$1), \
  49                         -t 0x2e -N production           -p $(CONFIG_TARGET_ROOTFS_PARTSIZE)M@64M \
  50                 )
  51         cat $@.tmp >> $@
  52         rm $@.tmp
  53 endef
  54
  55 metadata_gl_json = \
  56         '{ $(if $(IMAGE_METADATA),$(IMAGE_METADATA)$(comma)) \
  57                 "metadata_version": "1.1", \
  58                 "compat_version": "$(call json_quote,$(compat_version))", \
  59                 $(if $(DEVICE_COMPAT_MESSAGE),"compat_message": "$(call json_quote,$(DEVICE_COMPAT_MESSAGE))"$(comma)) \
  60                 $(if $(filter-out 1.0,$(compat_version)),"new_supported_devices": \
  61                         [$(call metadata_devices,$(SUPPORTED_DEVICES))]$(comma) \
  62                         "supported_devices": ["$(call json_quote,$(legacy_supported_message))"]$(comma)) \
  63                 $(if $(filter 1.0,$(compat_version)),"supported_devices":[$(call metadata_devices,$(SUPPORTED_DEVICES))]$(comma)) \
  64                 "version": { \
  65                         "release": "$(call json_quote,$(VERSION_NUMBER))", \
  66                         "date": "$(shell TZ='Asia/Chongqing' date '+%Y%m%d%H%M%S')", \
  67                         "dist": "$(call json_quote,$(VERSION_DIST))", \
  68                         "version": "$(call json_quote,$(VERSION_NUMBER))", \
  69                         "revision": "$(call json_quote,$(REVISION))", \
  70                         "target": "$(call json_quote,$(TARGETID))", \
  71                         "board": "$(call json_quote,$(if $(BOARD_NAME),$(BOARD_NAME),$(DEVICE_NAME)))" \
  72                 } \
  73         }'
  74
  75 define Build/append-gl-metadata
  76         $(if $(SUPPORTED_DEVICES),-echo $(call metadata_gl_json,$(SUPPORTED_DEVICES)) | fwtool -I - $@)
  77         sha256sum "$@" | cut -d" " -f1 > "$@.sha256sum"
  78         [ ! -s "$(BUILD_KEY)" -o ! -s "$(BUILD_KEY).ucert" -o ! -s "$@" ] || { \
  79                 cp "$(BUILD_KEY).ucert" "$@.ucert" ;\
  80                 usign -S -m "$@" -s "$(BUILD_KEY)" -x "$@.sig" ;\
  81                 ucert -A -c "$@.ucert" -x "$@.sig" ;\
  82                 fwtool -S "$@.ucert" "$@" ;\
  83         }
  84 endef
  85
  86 define Build/zyxel-nwa-fit-filogic
  87         $(TOPDIR)/scripts/mkits-zyxel-fit-filogic.sh \
  88                 $@.its $@ "80 e1 ff ff ff ff ff ff ff ff"
  89         PATH=$(LINUX_DIR)/scripts/dtc:$(PATH) mkimage -f $@.its $@.new
  90         @mv $@.new $@
  91 endef
  92
  93 define Build/cetron-header
  94         $(eval magic=$(word 1,$(1)))
  95         $(eval model=$(word 2,$(1)))
  96         ( \
  97                 dd if=/dev/zero bs=856 count=1 2>/dev/null; \
  98                 printf "$(model)," | dd bs=128 count=1 conv=sync 2>/dev/null; \
  99                 md5sum $@ | cut -f1 -d" " | dd bs=32 count=1 2>/dev/null; \
 100                 printf "$(magic)" | dd bs=4 count=1 conv=sync 2>/dev/null; \
 101                 cat $@; \
 102         ) > $@.tmp
 103         fw_crc=$$(gzip -c $@.tmp | tail -c 8 | od -An -N4 -tx4 --endian little | tr -d ' \n'); \
 104         printf "$$(echo $$fw_crc | sed 's/../\\x&/g')" | cat - $@.tmp > $@
 105         rm $@.tmp
 106 endef
 107
 108 define Device/asus_tuf-ax4200
 109   DEVICE_VENDOR := ASUS
 110   DEVICE_MODEL := TUF-AX4200
 111   DEVICE_DTS := mt7986a-asus-tuf-ax4200
 112   DEVICE_DTS_DIR := ../dts
 113   DEVICE_DTS_LOADADDR := 0x47000000
 114   DEVICE_PACKAGES := kmod-usb3 kmod-mt7986-firmware mt7986-wo-firmware
 115   IMAGES := sysupgrade.bin
 116   KERNEL := kernel-bin | lzma | \
 117         fit lzma $$(KDIR)/image-$$(firstword $$(DEVICE_DTS)).dtb
 118   KERNEL_INITRAMFS := kernel-bin | lzma | \
 119         fit lzma $$(KDIR)/image-$$(firstword $$(DEVICE_DTS)).dtb with-initrd | pad-to 64k
 120   IMAGE/sysupgrade.bin := sysupgrade-tar | append-metadata
 121 endef
 122 TARGET_DEVICES += asus_tuf-ax4200
 123
 124 define Device/acer_predator-w6
 125   DEVICE_VENDOR := Acer
 126   DEVICE_MODEL := Predator W6
 127   DEVICE_DTS := mt7986a-acer-predator-w6
 128   DEVICE_DTS_DIR := ../dts
 129   DEVICE_DTS_LOADADDR := 0x47000000
 130   DEVICE_PACKAGES := kmod-usb3 kmod-mt7986-firmware kmod-mt7916-firmware mt7986-wo-firmware e2fsprogs f2fsck mkf2fs
 131   IMAGES := sysupgrade.bin
 132   KERNEL := kernel-bin | lzma | fit lzma $$(KDIR)/image-$$(firstword $$(DEVICE_DTS)).dtb
 133   KERNEL_INITRAMFS := kernel-bin | lzma | \
 134         fit lzma $$(KDIR)/image-$$(firstword $$(DEVICE_DTS)).dtb with-initrd | pad-to 64k
 135   IMAGE/sysupgrade.bin := sysupgrade-tar | append-metadata
 136 endef
 137 TARGET_DEVICES += acer_predator-w6
 138
 139 define Device/bananapi_bpi-r3
 140   DEVICE_VENDOR := Bananapi
 141   DEVICE_MODEL := BPi-R3
 142   DEVICE_DTS := mt7986a-bananapi-bpi-r3
 143   DEVICE_DTS_CONFIG := config-mt7986a-bananapi-bpi-r3
 144   DEVICE_DTS_OVERLAY:= mt7986a-bananapi-bpi-r3-emmc mt7986a-bananapi-bpi-r3-nand mt7986a-bananapi-bpi-r3-nor mt7986a-bananapi-bpi-r3-sd
 145   DEVICE_DTS_DIR := $(DTS_DIR)/
 146   DEVICE_DTS_LOADADDR := 0x43f00000
 147   DEVICE_PACKAGES := kmod-hwmon-pwmfan kmod-i2c-gpio kmod-mt7986-firmware kmod-sfp kmod-usb3 e2fsprogs f2fsck mkf2fs mt7986-wo-firmware
 148   IMAGES := sysupgrade.itb
 149   KERNEL_LOADADDR := 0x44000000
 150   KERNEL_INITRAMFS_SUFFIX := -recovery.itb
 151   ARTIFACTS := \
 152                emmc-preloader.bin emmc-bl31-uboot.fip \
 153                nor-preloader.bin nor-bl31-uboot.fip \
 154                sdcard.img.gz \
 155                snand-preloader.bin snand-bl31-uboot.fip
 156   ARTIFACT/emmc-preloader.bin   := mt7986-bl2 emmc-ddr4
 157   ARTIFACT/emmc-bl31-uboot.fip  := mt7986-bl31-uboot bananapi_bpi-r3-emmc
 158   ARTIFACT/nor-preloader.bin    := mt7986-bl2 nor-ddr4
 159   ARTIFACT/nor-bl31-uboot.fip   := mt7986-bl31-uboot bananapi_bpi-r3-nor
 160   ARTIFACT/snand-preloader.bin  := mt7986-bl2 spim-nand-ddr4
 161   ARTIFACT/snand-bl31-uboot.fip := mt7986-bl31-uboot bananapi_bpi-r3-snand
 162   ARTIFACT/sdcard.img.gz        := mt798x-gpt sdmmc |\
 163                                    pad-to 17k | mt7986-bl2 sdmmc-ddr4 |\
 164                                    pad-to 6656k | mt7986-bl31-uboot bananapi_bpi-r3-sdmmc |\
 165                                 $(if $(CONFIG_TARGET_ROOTFS_INITRAMFS),\
 166                                    pad-to 12M | append-image-stage initramfs-recovery.itb | check-size 44m |\
 167                                 ) \
 168                                    pad-to 44M | mt7986-bl2 spim-nand-ddr4 |\
 169                                    pad-to 45M | mt7986-bl31-uboot bananapi_bpi-r3-snand |\
 170                                    pad-to 49M | mt7986-bl2 nor-ddr4 |\
 171                                    pad-to 50M | mt7986-bl31-uboot bananapi_bpi-r3-nor |\
 172                                    pad-to 51M | mt7986-bl2 emmc-ddr4 |\
 173                                    pad-to 52M | mt7986-bl31-uboot bananapi_bpi-r3-emmc |\
 174                                    pad-to 56M | mt798x-gpt emmc |\
 175                                 $(if $(CONFIG_TARGET_ROOTFS_SQUASHFS),\
 176                                    pad-to 64M | append-image squashfs-sysupgrade.itb | check-size |\
 177                                 ) \
 178                                   gzip
 179   IMAGE_SIZE := $$(shell expr 64 + $$(CONFIG_TARGET_ROOTFS_PARTSIZE))m
 180   KERNEL                        := kernel-bin | gzip
 181   KERNEL_INITRAMFS := kernel-bin | lzma | \
 182         fit lzma $$(KDIR)/image-$$(firstword $$(DEVICE_DTS)).dtb with-initrd | pad-to 64k
 183   IMAGE/sysupgrade.itb := append-kernel | fit gzip $$(KDIR)/image-$$(firstword $$(DEVICE_DTS)).dtb external-static-with-rootfs | pad-rootfs | append-metadata
 184   DEVICE_DTC_FLAGS := --pad 4096
 185   DEVICE_COMPAT_VERSION := 1.1
 186   DEVICE_COMPAT_MESSAGE := Device tree overlay mechanism needs bootloader update
 187 endef
 188 TARGET_DEVICES += bananapi_bpi-r3
 189
 190 define Device/cetron_ct3003
 191   DEVICE_VENDOR := Cetron
 192   DEVICE_MODEL := CT3003
 193   DEVICE_DTS := mt7981b-cetron-ct3003
 194   DEVICE_DTS_DIR := ../dts
 195   SUPPORTED_DEVICES += mediatek,mt7981-spim-snand-rfb
 196   DEVICE_PACKAGES := kmod-mt7981-firmware mt7981-wo-firmware
 197   UBINIZE_OPTS := -E 5
 198   BLOCKSIZE := 128k
 199   PAGESIZE := 2048
 200   KERNEL_IN_UBI := 1
 201   IMAGE/sysupgrade.bin := sysupgrade-tar | append-metadata
 202   IMAGES += factory.bin
 203   IMAGE/factory.bin := $$(IMAGE/sysupgrade.bin) | cetron-header rd30 CT3003
 204 endef
 205 TARGET_DEVICES += cetron_ct3003
 206
 207 define Device/cudy_wr3000-v1
 208   DEVICE_VENDOR := Cudy
 209   DEVICE_MODEL := WR3000
 210   DEVICE_VARIANT := v1
 211   DEVICE_DTS := mt7981b-cudy-wr3000-v1
 212   DEVICE_DTS_DIR := ../dts
 213   DEVICE_DTS_LOADADDR := 0x47000000
 214   IMAGES := sysupgrade.bin
 215   IMAGE_SIZE := 15424k
 216   SUPPORTED_DEVICES += R31
 217   KERNEL := kernel-bin | lzma | \
 218         fit lzma $$(KDIR)/image-$$(firstword $$(DEVICE_DTS)).dtb
 219   KERNEL_INITRAMFS := kernel-bin | lzma | \
 220         fit lzma $$(KDIR)/image-$$(firstword $$(DEVICE_DTS)).dtb with-initrd | pad-to 64k
 221   IMAGE/sysupgrade.bin := append-kernel | pad-to 128k | append-rootfs | pad-rootfs | check-size | append-metadata
 222   DEVICE_PACKAGES := kmod-mt7981-firmware
 223 endef
 224 TARGET_DEVICES += cudy_wr3000-v1
 225
 226 define Device/glinet_gl-mt3000
 227   DEVICE_VENDOR := GL.iNet
 228   DEVICE_MODEL := GL-MT3000
 229   DEVICE_DTS := mt7981b-glinet-gl-mt3000
 230   DEVICE_DTS_DIR := ../dts
 231   SUPPORTED_DEVICES += glinet,mt3000-snand
 232   DEVICE_PACKAGES := kmod-mt7981-firmware mt7981-wo-firmware kmod-hwmon-pwmfan kmod-usb3
 233   UBINIZE_OPTS := -E 5
 234   BLOCKSIZE := 128k
 235   PAGESIZE := 2048
 236   IMAGE_SIZE := 246272k
 237   KERNEL_IN_UBI := 1
 238   IMAGE/sysupgrade.bin := sysupgrade-tar | append-gl-metadata
 239 endef
 240 TARGET_DEVICES += glinet_gl-mt3000
 241
 242 define Device/glinet_gl-mt6000
 243   DEVICE_VENDOR := GL.iNet
 244   DEVICE_MODEL := GL-MT6000
 245   DEVICE_DTS := mt7986a-glinet-gl-mt6000
 246   DEVICE_DTS_DIR := ../dts
 247   DEVICE_PACKAGES := kmod-usb2 kmod-usb3 kmod-mt7986-firmware mt7986-wo-firmware e2fsprogs f2fsck mkf2fs
 248   IMAGES += factory.bin
 249   IMAGE/factory.bin := append-kernel | pad-to 32M | append-rootfs
 250   IMAGE/sysupgrade.bin := sysupgrade-tar | append-gl-metadata
 251   ARTIFACTS := preloader.bin bl31-uboot.fip
 252   ARTIFACT/preloader.bin := mt7986-bl2 emmc-ddr4
 253   ARTIFACT/bl31-uboot.fip := mt7986-bl31-uboot glinet_gl-mt6000
 254 endef
 255 TARGET_DEVICES += glinet_gl-mt6000
 256
 257 define Device/h3c_magic-nx30-pro
 258   DEVICE_VENDOR := H3C
 259   DEVICE_MODEL := Magic NX30 Pro
 260   DEVICE_DTS := mt7981b-h3c-magic-nx30-pro
 261   DEVICE_DTS_DIR := ../dts
 262   UBINIZE_OPTS := -E 5
 263   BLOCKSIZE := 128k
 264   PAGESIZE := 2048
 265   KERNEL_IN_UBI := 1
 266   UBOOTENV_IN_UBI := 1
 267   IMAGE_SIZE := 65536k
 268   IMAGES := sysupgrade.itb
 269   KERNEL_INITRAMFS_SUFFIX := -recovery.itb
 270   KERNEL := kernel-bin | gzip
 271   KERNEL_INITRAMFS := kernel-bin | lzma | \
 272         fit lzma $$(KDIR)/image-$$(firstword $$(DEVICE_DTS)).dtb with-initrd | pad-to 64k
 273   IMAGE/sysupgrade.itb := append-kernel | \
 274         fit gzip $$(KDIR)/image-$$(firstword $$(DEVICE_DTS)).dtb external-static-with-rootfs | append-metadata
 275   DEVICE_PACKAGES := kmod-mt7981-firmware mt7981-wo-firmware
 276   ARTIFACTS := preloader.bin bl31-uboot.fip
 277   ARTIFACT/preloader.bin := mt7981-bl2 spim-nand-ddr3
 278   ARTIFACT/bl31-uboot.fip := mt7981-bl31-uboot h3c_magic-nx30-pro
 279 endef
 280 TARGET_DEVICES += h3c_magic-nx30-pro
 281
 282 define Device/netgear_wax220
 283   DEVICE_VENDOR := NETGEAR
 284   DEVICE_MODEL := WAX220
 285   DEVICE_DTS := mt7986b-netgear-wax220
 286   DEVICE_DTS_DIR := ../dts
 287   NETGEAR_ENC_MODEL := WAX220
 288   NETGEAR_ENC_REGION := US
 289   DEVICE_PACKAGES := kmod-mt7986-firmware mt7986-wo-firmware
 290   KERNEL_INITRAMFS_SUFFIX := -recovery.itb
 291   IMAGE_SIZE := 32768k
 292   IMAGE/sysupgrade.bin := sysupgrade-tar | append-metadata
 293   IMAGES += factory.img
 294   # Padding to 10M seems to be required by OEM web interface
 295   IMAGE/factory.img := sysupgrade-tar | \
 296           pad-to 10M | check-size | netgear-encrypted-factory
 297 endef
 298 TARGET_DEVICES += netgear_wax220
 299
 300 define Device/mediatek_mt7981-rfb
 301   DEVICE_VENDOR := MediaTek
 302   DEVICE_MODEL := MT7981 rfb
 303   DEVICE_DTS := mt7981-rfb
 304   DEVICE_DTS_OVERLAY:= \
 305         mt7981-rfb-spim-nand \
 306         mt7981-rfb-mxl-2p5g-phy-eth1 \
 307         mt7981-rfb-mxl-2p5g-phy-swp5
 308   DEVICE_DTS_DIR := $(DTS_DIR)/
 309   DEVICE_DTC_FLAGS := --pad 4096
 310   DEVICE_DTS_LOADADDR := 0x43f00000
 311   DEVICE_PACKAGES := kmod-mt7981-firmware kmod-usb3 e2fsprogs f2fsck mkf2fs mt7981-wo-firmware
 312   KERNEL_LOADADDR := 0x44000000
 313   KERNEL := kernel-bin | gzip
 314   KERNEL_INITRAMFS := kernel-bin | lzma | \
 315         fit lzma $$(KDIR)/image-$$(firstword $$(DEVICE_DTS)).dtb with-initrd | pad-to 64k
 316   KERNEL_INITRAMFS_SUFFIX := .itb
 317   KERNEL_IN_UBI := 1
 318   UBOOTENV_IN_UBI := 1
 319   IMAGES := sysupgrade.itb
 320   IMAGE_SIZE := $$(shell expr 64 + $$(CONFIG_TARGET_ROOTFS_PARTSIZE))m
 321   IMAGE/sysupgrade.itb := append-kernel | fit gzip $$(KDIR)/image-$$(firstword $$(DEVICE_DTS)).dtb external-with-rootfs | pad-rootfs | append-metadata
 322   ARTIFACTS := \
 323         emmc-preloader.bin emmc-bl31-uboot.fip \
 324         nor-preloader.bin nor-bl31-uboot.fip \
 325         sdcard.img.gz \
 326         snfi-nand-preloader.bin snfi-nand-bl31-uboot.fip \
 327         spim-nand-preloader.bin spim-nand-bl31-uboot.fip
 328   ARTIFACT/emmc-preloader.bin           := mt7981-bl2 emmc-ddr3
 329   ARTIFACT/emmc-bl31-uboot.fip          := mt7981-bl31-uboot rfb-emmc
 330   ARTIFACT/nor-preloader.bin            := mt7981-bl2 nor-ddr3
 331   ARTIFACT/nor-bl31-uboot.fip           := mt7981-bl31-uboot rfb-emmc
 332   ARTIFACT/snfi-nand-preloader.bin      := mt7981-bl2 snand-ddr3
 333   ARTIFACT/snfi-nand-bl31-uboot.fip     := mt7981-bl31-uboot rfb-snfi
 334   ARTIFACT/spim-nand-preloader.bin      := mt7981-bl2 spim-nand-ddr3
 335   ARTIFACT/spim-nand-bl31-uboot.fip     := mt7981-bl31-uboot rfb-spim-nand
 336   ARTIFACT/sdcard.img.gz        := mt798x-gpt sdmmc |\
 337                                    pad-to 17k | mt7981-bl2 sdmmc-ddr3 |\
 338                                    pad-to 6656k | mt7981-bl31-uboot rfb-sd |\
 339                                 $(if $(CONFIG_TARGET_ROOTFS_INITRAMFS),\
 340                                    pad-to 12M | append-image-stage initramfs.itb | check-size 44m |\
 341                                 ) \
 342                                    pad-to 44M | mt7981-bl2 spim-nand-ddr3 |\
 343                                    pad-to 45M | mt7981-bl31-uboot rfb-spim-nand |\
 344                                    pad-to 49M | mt7981-bl2 nor-ddr3 |\
 345                                    pad-to 50M | mt7981-bl31-uboot rfb-nor |\
 346                                    pad-to 51M | mt7981-bl2 snand-ddr3 |\
 347                                    pad-to 53M | mt7981-bl31-uboot rfb-snfi |\
 348                                 $(if $(CONFIG_TARGET_ROOTFS_SQUASHFS),\
 349                                    pad-to 64M | append-image squashfs-sysupgrade.itb | check-size |\
 350                                 ) \
 351                                   gzip
 352 endef
 353 TARGET_DEVICES += mediatek_mt7981-rfb
 354
 355 define Device/mediatek_mt7986a-rfb-nand
 356   DEVICE_VENDOR := MediaTek
 357   DEVICE_MODEL := MT7986 rfba AP (NAND)
 358   DEVICE_DTS := mt7986a-rfb-spim-nand
 359   DEVICE_DTS_DIR := $(DTS_DIR)/
 360   DEVICE_PACKAGES := kmod-mt7986-firmware mt7986-wo-firmware
 361   SUPPORTED_DEVICES := mediatek,mt7986a-rfb-snand
 362   UBINIZE_OPTS := -E 5
 363   BLOCKSIZE := 128k
 364   PAGESIZE := 2048
 365   IMAGE_SIZE := 65536k
 366   KERNEL_IN_UBI := 1
 367   IMAGES += factory.bin
 368   IMAGE/factory.bin := append-ubi | check-size $$$$(IMAGE_SIZE)
 369   IMAGE/sysupgrade.bin := sysupgrade-tar | append-metadata
 370   KERNEL = kernel-bin | lzma | \
 371         fit lzma $$(KDIR)/image-$$(firstword $$(DEVICE_DTS)).dtb
 372   KERNEL_INITRAMFS = kernel-bin | lzma | \
 373         fit lzma $$(KDIR)/image-$$(firstword $$(DEVICE_DTS)).dtb with-initrd
 374 endef
 375 TARGET_DEVICES += mediatek_mt7986a-rfb-nand
 376
 377 define Device/mediatek_mt7986b-rfb
 378   DEVICE_VENDOR := MediaTek
 379   DEVICE_MODEL := MTK7986 rfbb AP
 380   DEVICE_DTS := mt7986b-rfb
 381   DEVICE_DTS_DIR := $(DTS_DIR)/
 382   DEVICE_PACKAGES := kmod-mt7986-firmware mt7986-wo-firmware
 383   SUPPORTED_DEVICES := mediatek,mt7986b-rfb
 384   UBINIZE_OPTS := -E 5
 385   BLOCKSIZE := 128k
 386   PAGESIZE := 2048
 387   IMAGE_SIZE := 65536k
 388   KERNEL_IN_UBI := 1
 389   IMAGES += factory.bin
 390   IMAGE/factory.bin := append-ubi | check-size $$$$(IMAGE_SIZE)
 391   IMAGE/sysupgrade.bin := sysupgrade-tar | append-metadata
 392 endef
 393 TARGET_DEVICES += mediatek_mt7986b-rfb
 394
 395 define Device/mediatek_mt7988a-rfb
 396   DEVICE_VENDOR := MediaTek
 397   DEVICE_MODEL := MT7988A rfb
 398   DEVICE_DTS := mt7988a-rfb
 399   DEVICE_DTS_OVERLAY:= \
 400         mt7988a-rfb-emmc \
 401         mt7988a-rfb-sd \
 402         mt7988a-rfb-snfi-nand \
 403         mt7988a-rfb-spim-nand \
 404         mt7988a-rfb-spim-nor \
 405         mt7988a-rfb-eth1-aqr \
 406         mt7988a-rfb-eth1-i2p5g-phy \
 407         mt7988a-rfb-eth1-mxl \
 408         mt7988a-rfb-eth1-sfp \
 409         mt7988a-rfb-eth2-aqr \
 410         mt7988a-rfb-eth2-mxl \
 411         mt7988a-rfb-eth2-sfp
 412   DEVICE_DTS_DIR := $(DTS_DIR)/
 413   DEVICE_DTC_FLAGS := --pad 4096
 414   DEVICE_DTS_LOADADDR := 0x45f00000
 415   DEVICE_PACKAGES := kmod-sfp
 416   KERNEL_LOADADDR := 0x46000000
 417   KERNEL := kernel-bin | gzip
 418   KERNEL_INITRAMFS := kernel-bin | lzma | \
 419         fit lzma $$(KDIR)/image-$$(firstword $$(DEVICE_DTS)).dtb with-initrd | pad-to 64k
 420   KERNEL_INITRAMFS_SUFFIX := .itb
 421   KERNEL_IN_UBI := 1
 422   IMAGE_SIZE := $$(shell expr 64 + $$(CONFIG_TARGET_ROOTFS_PARTSIZE))m
 423   IMAGES := sysupgrade.itb
 424   IMAGE/sysupgrade.itb := append-kernel | fit gzip $$(KDIR)/image-$$(firstword $$(DEVICE_DTS)).dtb external-with-rootfs | pad-rootfs | append-metadata
 425   ARTIFACTS := \
 426                emmc-gpt.bin emmc-preloader.bin emmc-bl31-uboot.fip \
 427                nor-preloader.bin nor-bl31-uboot.fip \
 428                sdcard.img.gz \
 429                snand-preloader.bin snand-bl31-uboot.fip
 430   ARTIFACT/emmc-gpt.bin         := mt798x-gpt emmc
 431   ARTIFACT/emmc-preloader.bin   := mt7988-bl2 emmc-comb
 432   ARTIFACT/emmc-bl31-uboot.fip  := mt7988-bl31-uboot rfb-emmc
 433   ARTIFACT/nor-preloader.bin    := mt7988-bl2 nor-comb
 434   ARTIFACT/nor-bl31-uboot.fip   := mt7988-bl31-uboot rfb-nor
 435   ARTIFACT/snand-preloader.bin  := mt7988-bl2 spim-nand-comb
 436   ARTIFACT/snand-bl31-uboot.fip := mt7988-bl31-uboot rfb-snand
 437   ARTIFACT/sdcard.img.gz        := mt798x-gpt sdmmc |\
 438                                    pad-to 17k | mt7988-bl2 sdmmc-comb |\
 439                                    pad-to 6656k | mt7988-bl31-uboot rfb-sd |\
 440                                 $(if $(CONFIG_TARGET_ROOTFS_INITRAMFS),\
 441                                    pad-to 12M | append-image-stage initramfs.itb | check-size 44m |\
 442                                 ) \
 443                                    pad-to 44M | mt7988-bl2 spim-nand-comb |\
 444                                    pad-to 45M | mt7988-bl31-uboot rfb-snand |\
 445                                    pad-to 51M | mt7988-bl2 nor-comb |\
 446                                    pad-to 51M | mt7988-bl31-uboot rfb-nor |\
 447                                    pad-to 55M | mt7988-bl2 emmc-comb |\
 448                                    pad-to 56M | mt7988-bl31-uboot rfb-emmc |\
 449                                    pad-to 62M | mt798x-gpt emmc |\
 450                                 $(if $(CONFIG_TARGET_ROOTFS_SQUASHFS),\
 451                                    pad-to 64M | append-image squashfs-sysupgrade.itb | check-size |\
 452                                 ) \
 453                                   gzip
 454 endef
 455 TARGET_DEVICES += mediatek_mt7988a-rfb
 456
 457 define Device/mercusys_mr90x-v1
 458   DEVICE_VENDOR := Mercusys
 459   DEVICE_MODEL := MR90X v1
 460   DEVICE_DTS := mt7986b-mercusys-mr90x-v1
 461   DEVICE_DTS_DIR := ../dts
 462   DEVICE_PACKAGES := kmod-mt7986-firmware mt7986-wo-firmware
 463   UBINIZE_OPTS := -E 5
 464   BLOCKSIZE := 128k
 465   PAGESIZE := 2048
 466   IMAGE_SIZE := 51200k
 467   IMAGE/sysupgrade.bin := sysupgrade-tar | append-metadata
 468 endef
 469 TARGET_DEVICES += mercusys_mr90x-v1
 470
 471 define Device/qihoo_360t7
 472   DEVICE_VENDOR := Qihoo
 473   DEVICE_MODEL := 360T7
 474   DEVICE_DTS := mt7981b-qihoo-360t7
 475   DEVICE_DTS_DIR := ../dts
 476   UBINIZE_OPTS := -E 5
 477   BLOCKSIZE := 128k
 478   PAGESIZE := 2048
 479   KERNEL_IN_UBI := 1
 480   UBOOTENV_IN_UBI := 1
 481   IMAGES := sysupgrade.itb
 482   KERNEL_INITRAMFS_SUFFIX := -recovery.itb
 483   KERNEL := kernel-bin | gzip
 484   KERNEL_INITRAMFS := kernel-bin | lzma | \
 485         fit lzma $$(KDIR)/image-$$(firstword $$(DEVICE_DTS)).dtb with-initrd | pad-to 64k
 486   IMAGE/sysupgrade.itb := append-kernel | \
 487         fit gzip $$(KDIR)/image-$$(firstword $$(DEVICE_DTS)).dtb external-static-with-rootfs | append-metadata
 488   DEVICE_PACKAGES := kmod-mt7981-firmware mt7981-wo-firmware
 489   ARTIFACTS := preloader.bin bl31-uboot.fip
 490   ARTIFACT/preloader.bin := mt7981-bl2 spim-nand-ddr3
 491   ARTIFACT/bl31-uboot.fip := mt7981-bl31-uboot qihoo_360t7
 492 endef
 493 TARGET_DEVICES += qihoo_360t7
 494
 495 define Device/tplink_tl-xdr-common
 496   DEVICE_VENDOR := TP-Link
 497   DEVICE_DTS_DIR := ../dts
 498   UBINIZE_OPTS := -E 5
 499   BLOCKSIZE := 128k
 500   PAGESIZE := 2048
 501   KERNEL_IN_UBI := 1
 502   UBOOTENV_IN_UBI := 1
 503   IMAGES := sysupgrade.itb
 504   KERNEL_INITRAMFS_SUFFIX := -recovery.itb
 505   KERNEL := kernel-bin | gzip
 506   KERNEL_INITRAMFS := kernel-bin | lzma | \
 507         fit lzma $$(KDIR)/image-$$(firstword $$(DEVICE_DTS)).dtb with-initrd | pad-to 64k
 508   IMAGE/sysupgrade.itb := append-kernel | \
 509         fit gzip $$(KDIR)/image-$$(firstword $$(DEVICE_DTS)).dtb external-with-rootfs | append-metadata
 510   DEVICE_PACKAGES := kmod-usb3 kmod-mt7986-firmware mt7986-wo-firmware
 511   ARTIFACTS := preloader.bin bl31-uboot.fip
 512   ARTIFACT/preloader.bin := mt7986-bl2 spim-nand-ddr3
 513 endef
 514
 515 define Device/tplink_tl-xdr4288
 516   DEVICE_MODEL := TL-XDR4288
 517   DEVICE_DTS := mt7986a-tplink-tl-xdr4288
 518   ARTIFACT/bl31-uboot.fip := mt7986-bl31-uboot tplink_tl-xdr4288
 519   $(call Device/tplink_tl-xdr-common)
 520 endef
 521 TARGET_DEVICES += tplink_tl-xdr4288
 522
 523 define Device/tplink_tl-xdr6086
 524   DEVICE_MODEL := TL-XDR6086
 525   DEVICE_DTS := mt7986a-tplink-tl-xdr6086
 526   ARTIFACT/bl31-uboot.fip := mt7986-bl31-uboot tplink_tl-xdr6086
 527   $(call Device/tplink_tl-xdr-common)
 528 endef
 529 TARGET_DEVICES += tplink_tl-xdr6086
 530
 531 define Device/tplink_tl-xdr6088
 532   DEVICE_MODEL := TL-XDR6088
 533   DEVICE_DTS := mt7986a-tplink-tl-xdr6088
 534   ARTIFACT/bl31-uboot.fip := mt7986-bl31-uboot tplink_tl-xdr6088
 535   $(call Device/tplink_tl-xdr-common)
 536 endef
 537 TARGET_DEVICES += tplink_tl-xdr6088
 538
 539 define Device/ubnt_unifi-6-plus
 540   DEVICE_VENDOR := Ubiquiti
 541   DEVICE_MODEL := UniFi 6 Plus
 542   DEVICE_DTS := mt7981a-ubnt-unifi-6-plus
 543   DEVICE_DTS_DIR := ../dts
 544   DEVICE_PACKAGES := kmod-mt7981-firmware mt7981-wo-firmware e2fsprogs f2fsck mkf2fs fdisk partx-utils
 545   IMAGE/sysupgrade.bin := sysupgrade-tar | append-metadata
 546 endef
 547 TARGET_DEVICES += ubnt_unifi-6-plus
 548
 549 define Device/xiaomi_mi-router-wr30u-112m-nmbm
 550   DEVICE_VENDOR := Xiaomi
 551   DEVICE_MODEL := Mi Router WR30U (112M UBI with NMBM-Enabled layout)
 552   DEVICE_DTS := mt7981b-xiaomi-mi-router-wr30u-112m-nmbm
 553   DEVICE_DTS_DIR := ../dts
 554   UBINIZE_OPTS := -E 5
 555   BLOCKSIZE := 128k
 556   PAGESIZE := 2048
 557   DEVICE_PACKAGES := kmod-mt7981-firmware mt7981-wo-firmware
 558 ifneq ($(CONFIG_TARGET_ROOTFS_INITRAMFS),)
 559   ARTIFACTS := initramfs-factory.ubi
 560   ARTIFACT/initramfs-factory.ubi := append-image-stage initramfs-kernel.bin | ubinize-kernel
 561 endif
 562   IMAGE/sysupgrade.bin := sysupgrade-tar | append-metadata
 563 endef
 564 TARGET_DEVICES += xiaomi_mi-router-wr30u-112m-nmbm
 565
 566 define Device/xiaomi_mi-router-wr30u-stock
 567   DEVICE_VENDOR := Xiaomi
 568   DEVICE_MODEL := Mi Router WR30U (stock layout)
 569   DEVICE_DTS := mt7981b-xiaomi-mi-router-wr30u-stock
 570   DEVICE_DTS_DIR := ../dts
 571   UBINIZE_OPTS := -E 5
 572   BLOCKSIZE := 128k
 573   PAGESIZE := 2048
 574   DEVICE_PACKAGES := kmod-mt7981-firmware mt7981-wo-firmware
 575 ifneq ($(CONFIG_TARGET_ROOTFS_INITRAMFS),)
 576   ARTIFACTS := initramfs-factory.ubi
 577   ARTIFACT/initramfs-factory.ubi := append-image-stage initramfs-kernel.bin | ubinize-kernel
 578 endif
 579   IMAGE/sysupgrade.bin := sysupgrade-tar | append-metadata
 580 endef
 581 TARGET_DEVICES += xiaomi_mi-router-wr30u-stock
 582
 583 define Device/xiaomi_mi-router-wr30u-ubootmod
 584   DEVICE_VENDOR := Xiaomi
 585   DEVICE_MODEL := Mi Router WR30U (OpenWrt U-Boot layout)
 586   DEVICE_DTS := mt7981b-xiaomi-mi-router-wr30u-ubootmod
 587   DEVICE_DTS_DIR := ../dts
 588   UBINIZE_OPTS := -E 5
 589   BLOCKSIZE := 128k
 590   PAGESIZE := 2048
 591   DEVICE_PACKAGES := kmod-mt7981-firmware mt7981-wo-firmware
 592   KERNEL_IN_UBI := 1
 593   UBOOTENV_IN_UBI := 1
 594   IMAGES := sysupgrade.itb
 595   KERNEL_INITRAMFS_SUFFIX := -recovery.itb
 596   KERNEL := kernel-bin | gzip
 597   KERNEL_INITRAMFS := kernel-bin | lzma | \
 598         fit lzma $$(KDIR)/image-$$(firstword $$(DEVICE_DTS)).dtb with-initrd | pad-to 64k
 599   IMAGE/sysupgrade.itb := append-kernel | \
 600         fit gzip $$(KDIR)/image-$$(firstword $$(DEVICE_DTS)).dtb external-static-with-rootfs | append-metadata
 601   ARTIFACTS := preloader.bin bl31-uboot.fip
 602   ARTIFACT/preloader.bin := mt7981-bl2 spim-nand-ddr3
 603   ARTIFACT/bl31-uboot.fip := mt7981-bl31-uboot xiaomi_mi-router-wr30u
 604 ifneq ($(CONFIG_TARGET_ROOTFS_INITRAMFS),)
 605   ARTIFACTS += initramfs-factory.ubi
 606   ARTIFACT/initramfs-factory.ubi := append-image-stage initramfs-recovery.itb | ubinize-kernel
 607 endif
 608 endef
 609 TARGET_DEVICES += xiaomi_mi-router-wr30u-ubootmod
 610
 611 define Device/xiaomi_redmi-router-ax6000-stock
 612   DEVICE_VENDOR := Xiaomi
 613   DEVICE_MODEL := Redmi Router AX6000 (stock layout)
 614   DEVICE_DTS := mt7986a-xiaomi-redmi-router-ax6000-stock
 615   DEVICE_DTS_DIR := ../dts
 616   DEVICE_PACKAGES := kmod-leds-ws2812b kmod-mt7986-firmware mt7986-wo-firmware
 617   UBINIZE_OPTS := -E 5
 618   BLOCKSIZE := 128k
 619   PAGESIZE := 2048
 620 ifneq ($(CONFIG_TARGET_ROOTFS_INITRAMFS),)
 621   ARTIFACTS := initramfs-factory.ubi
 622   ARTIFACT/initramfs-factory.ubi := append-image-stage initramfs-kernel.bin | ubinize-kernel
 623 endif
 624   IMAGE/sysupgrade.bin := sysupgrade-tar | append-metadata
 625 endef
 626 TARGET_DEVICES += xiaomi_redmi-router-ax6000-stock
 627
 628 define Device/xiaomi_redmi-router-ax6000-ubootmod
 629   DEVICE_VENDOR := Xiaomi
 630   DEVICE_MODEL := Redmi Router AX6000 (OpenWrt U-Boot layout)
 631   DEVICE_DTS := mt7986a-xiaomi-redmi-router-ax6000-ubootmod
 632   DEVICE_DTS_DIR := ../dts
 633   DEVICE_PACKAGES := kmod-leds-ws2812b kmod-mt7986-firmware mt7986-wo-firmware
 634   KERNEL_INITRAMFS_SUFFIX := -recovery.itb
 635   IMAGES := sysupgrade.itb
 636   UBINIZE_OPTS := -E 5
 637   BLOCKSIZE := 128k
 638   PAGESIZE := 2048
 639   KERNEL_IN_UBI := 1
 640   UBOOTENV_IN_UBI := 1
 641   KERNEL := kernel-bin | gzip
 642   KERNEL_INITRAMFS := kernel-bin | lzma | \
 643         fit lzma $$(KDIR)/image-$$(firstword $$(DEVICE_DTS)).dtb with-initrd | pad-to 64k
 644   IMAGE/sysupgrade.itb := append-kernel | \
 645         fit gzip $$(KDIR)/image-$$(firstword $$(DEVICE_DTS)).dtb external-static-with-rootfs | append-metadata
 646   ARTIFACTS := preloader.bin bl31-uboot.fip
 647   ARTIFACT/preloader.bin := mt7986-bl2 spim-nand-ddr4
 648   ARTIFACT/bl31-uboot.fip := mt7986-bl31-uboot xiaomi_redmi-router-ax6000
 649 ifneq ($(CONFIG_TARGET_ROOTFS_INITRAMFS),)
 650   ARTIFACTS += initramfs-factory.ubi
 651   ARTIFACT/initramfs-factory.ubi := append-image-stage initramfs-recovery.itb | ubinize-kernel
 652 endif
 653 endef
 654 TARGET_DEVICES += xiaomi_redmi-router-ax6000-ubootmod
 655
 656 define Device/zyxel_ex5601-t0-stock
 657   DEVICE_VENDOR := Zyxel
 658   DEVICE_MODEL := EX5601-T0  (stock layout)
 659   DEVICE_DTS := mt7986a-zyxel-ex5601-t0-stock
 660   DEVICE_DTS_DIR := ../dts
 661   DEVICE_PACKAGES := kmod-mt7986-firmware mt7986-wo-firmware
 662   SUPPORTED_DEVICES := mediatek,mt7986a-rfb-snand
 663   UBINIZE_OPTS := -E 5
 664   BLOCKSIZE := 256k
 665   PAGESIZE := 4096
 666   IMAGE_SIZE := 65536k
 667   KERNEL_IN_UBI := 1
 668   IMAGES += factory.bin
 669   IMAGE/factory.bin := append-ubi | check-size $$$$(IMAGE_SIZE)
 670   IMAGE/sysupgrade.bin := sysupgrade-tar | append-metadata
 671   KERNEL = kernel-bin | lzma | \
 672         fit lzma $$(KDIR)/image-$$(firstword $$(DEVICE_DTS)).dtb
 673   KERNEL_INITRAMFS = kernel-bin | lzma | \
 674         fit lzma $$(KDIR)/image-$$(firstword $$(DEVICE_DTS)).dtb with-initrd
 675 endef
 676 TARGET_DEVICES += zyxel_ex5601-t0-stock
 677
 678 define Device/zyxel_ex5700-telenor
 679   DEVICE_VENDOR := ZyXEL
 680   DEVICE_MODEL := EX5700 (Telenor)
 681   DEVICE_DTS := mt7986a-zyxel-ex5700-telenor
 682   DEVICE_DTS_DIR := ../dts
 683   DEVICE_PACKAGES := kmod-mt7916-firmware kmod-ubootenv-nvram kmod-usb3 kmod-mt7986-firmware mt7986-wo-firmware
 684   UBINIZE_OPTS := -E 5
 685   BLOCKSIZE := 128k
 686   PAGESIZE := 2048
 687   IMAGE_SIZE := 65536k
 688   IMAGE/sysupgrade.bin := sysupgrade-tar | append-metadata
 689 endef
 690 TARGET_DEVICES += zyxel_ex5700-telenor
 691
 692 define Device/zyxel_nwa50ax-pro
 693   DEVICE_VENDOR := ZyXEL
 694   DEVICE_MODEL := NWA50AX Pro
 695   DEVICE_DTS := mt7981b-zyxel-nwa50ax-pro
 696   DEVICE_DTS_DIR := ../dts
 697   DEVICE_PACKAGES := kmod-mt7981-firmware mt7981-wo-firmware zyxel-bootconfig
 698   DEVICE_DTS_LOADADDR := 0x44000000
 699   UBINIZE_OPTS := -E 5
 700   BLOCKSIZE := 128k
 701   PAGESIZE := 2048
 702   IMAGE_SIZE := 51200k
 703   KERNEL_IN_UBI := 1
 704   IMAGES += factory.bin
 705   IMAGE/factory.bin := append-ubi | check-size $$$$(IMAGE_SIZE) | zyxel-nwa-fit-filogic
 706   IMAGE/sysupgrade.bin := sysupgrade-tar | append-metadata
 707 endef
 708 TARGET_DEVICES += zyxel_nwa50ax-pro