target/linux/ipq40xx/image/generic.mk

   1
   2 DEVICE_VARS += NETGEAR_BOARD_ID NETGEAR_HW_ID
   3 DEVICE_VARS += RAS_BOARD RAS_ROOTFS_SIZE RAS_VERSION
   4 DEVICE_VARS += WRGG_DEVNAME WRGG_SIGNATURE
   5
   6 define Device/FitImage
   7         KERNEL_SUFFIX := -uImage.itb
   8         KERNEL = kernel-bin | gzip | fit gzip $$(KDIR)/image-$$(DEVICE_DTS).dtb
   9         KERNEL_NAME := Image
  10 endef
  11
  12 define Device/FitImageLzma
  13         KERNEL_SUFFIX := -uImage.itb
  14         KERNEL = kernel-bin | lzma | fit lzma $$(KDIR)/image-$$(DEVICE_DTS).dtb
  15         KERNEL_NAME := Image
  16 endef
  17
  18 define Device/FitzImage
  19         KERNEL_SUFFIX := -zImage.itb
  20         KERNEL = kernel-bin | fit none $$(KDIR)/image-$$(DEVICE_DTS).dtb
  21         KERNEL_NAME := zImage
  22 endef
  23
  24 define Device/UbiFit
  25         KERNEL_IN_UBI := 1
  26         IMAGES := factory.ubi sysupgrade.bin
  27         IMAGE/factory.ubi := append-ubi
  28         IMAGE/sysupgrade.bin := sysupgrade-tar | append-metadata
  29 endef
  30
  31 define Device/DniImage
  32         $(call Device/FitzImage)
  33         NETGEAR_BOARD_ID :=
  34         NETGEAR_HW_ID :=
  35         IMAGES += factory.img
  36         IMAGE/factory.img := append-kernel | pad-offset 64k 64 | append-uImage-fakehdr filesystem | append-rootfs | pad-rootfs | netgear-dni
  37         IMAGE/sysupgrade.bin := append-kernel | pad-offset 64k 64 | append-uImage-fakehdr filesystem | \
  38                 append-rootfs | pad-rootfs | check-size | append-metadata
  39 endef
  40
  41 define Build/append-rootfshdr
  42         mkimage -A $(LINUX_KARCH) \
  43                 -O linux -T filesystem \
  44                 -C lzma -a $(KERNEL_LOADADDR) -e $(if $(KERNEL_ENTRY),$(KERNEL_ENTRY),$(KERNEL_LOADADDR)) \
  45                 -n root.squashfs -d $(IMAGE_ROOTFS) $@.new
  46         cat $(IMAGE_KERNEL) > $@.$1
  47         dd if=$@.new bs=64 count=1 >> $@.$1
  48 endef
  49
  50 define Build/append-rutx-metadata
  51         echo \
  52                 '{ \
  53                         "device_code": [".*"], \
  54                         "hwver": [".*"], \
  55                         "batch": [".*"], \
  56                         "serial": [".*"], \
  57                         "supported_devices":["teltonika,rutx"] \
  58                 }' | fwtool -I - $@
  59 endef
  60
  61 define Build/copy-file
  62         cat "$(1)" > "$@"
  63 endef
  64
  65 define Build/mkmylofw_32m
  66         $(eval device_id=$(word 1,$(1)))
  67         $(eval revision=$(word 2,$(1)))
  68
  69         let \
  70                 size="$$(stat -c%s $@)" \
  71                 pad="$(subst k,* 1024,$(BLOCKSIZE))" \
  72                 pad="(pad - (size % pad)) % pad" \
  73                 newsize='size + pad'; \
  74                 $(STAGING_DIR_HOST)/bin/mkmylofw \
  75                 -B WPE72 -i 0x11f6:$(device_id):0x11f6:$(device_id) -r $(revision) \
  76                 -s 0x2000000 -p0x180000:$$newsize:al:0x80208000:"OpenWrt":$@ \
  77                 $@.new
  78         @mv $@.new $@
  79 endef
  80
  81 define Build/wac5xx-netgear-tar
  82         mkdir $@.tmp
  83         mv $@ $@.tmp/wac5xx-ubifs-root.img
  84         md5sum $@.tmp/wac5xx-ubifs-root.img > $@.tmp/wac5xx-ubifs-root.md5sum
  85         echo "WAC505 WAC510" > $@.tmp/metadata.txt
  86         echo "WAC505_V9.9.9.9" > $@.tmp/version
  87         tar -C $@.tmp/ -cf $@ .
  88         rm -rf $@.tmp
  89 endef
  90
  91 define Build/qsdk-ipq-factory-nand-askey
  92         $(TOPDIR)/scripts/mkits-qsdk-ipq-image.sh $@.its\
  93                 askey_kernel $@.$1 \
  94                 askey_fs $(IMAGE_ROOTFS) \
  95                 ubifs $@
  96         PATH=$(LINUX_DIR)/scripts/dtc:$(PATH) mkimage -f $@.its $@.new
  97         @mv $@.new $@
  98 endef
  99
 100 define Build/qsdk-ipq-app-gpt
 101         cp $@ $@.tmp 2>/dev/null || true
 102         ptgen -g -o $@.tmp -a 1 -l 1024 \
 103                         -t 0x2e -N 0:HLOS -r -p 32M \
 104                         -t 0x83 -N rootfs -r -p 128M \
 105                                 -N rootfs_data -p 512M
 106         cat $@.tmp >> $@
 107         rm $@.tmp
 108 endef
 109
 110 define Build/SenaoFW
 111         -$(STAGING_DIR_HOST)/bin/mksenaofw \
 112                 -n $(BOARD_NAME) -r $(VENDOR_ID) -p $(1) \
 113                 -c $(DATECODE) -w $(2) -x $(CW_VER) -t 0 \
 114                 -e $@ \
 115                 -o $@.new
 116         @cp $@.new $@
 117 endef
 118
 119 define Build/wrgg-image
 120         mkwrggimg -i $@ \
 121         -o $@.new \
 122         -d "$(WRGG_DEVNAME)" \
 123         -s "$(WRGG_SIGNATURE)" \
 124         -v "" -m "" -B ""
 125         mv $@.new $@
 126 endef
 127
 128 define Device/8dev_habanero-dvk
 129         $(call Device/FitImageLzma)
 130         DEVICE_VENDOR := 8devices
 131         DEVICE_MODEL := Habanero DVK
 132         IMAGE_SIZE := 30976k
 133         SOC := qcom-ipq4019
 134         IMAGE/sysupgrade.bin := append-kernel | pad-to 64k | append-rootfs | pad-rootfs | check-size | append-metadata
 135 endef
 136 TARGET_DEVICES += 8dev_habanero-dvk
 137
 138 define Device/8dev_jalapeno-common
 139         $(call Device/FitImage)
 140         $(call Device/UbiFit)
 141         BLOCKSIZE := 128k
 142         PAGESIZE := 2048
 143         SOC := qcom-ipq4018
 144 endef
 145
 146 define Device/8dev_jalapeno
 147         $(call Device/8dev_jalapeno-common)
 148         DEVICE_VENDOR := 8devices
 149         DEVICE_MODEL := Jalapeno
 150 endef
 151 TARGET_DEVICES += 8dev_jalapeno
 152
 153 define Device/alfa-network_ap120c-ac
 154         $(call Device/FitImage)
 155         $(call Device/UbiFit)
 156         DEVICE_VENDOR := ALFA Network
 157         DEVICE_MODEL := AP120C-AC
 158         SOC := qcom-ipq4018
 159         DEVICE_PACKAGES := kmod-usb-acm kmod-tpm-i2c-atmel
 160         BLOCKSIZE := 128k
 161         PAGESIZE := 2048
 162         IMAGE_SIZE := 65536k
 163         IMAGES := factory.bin sysupgrade.bin
 164         IMAGE/factory.bin := append-ubi | qsdk-ipq-factory-nand
 165 endef
 166 TARGET_DEVICES += alfa-network_ap120c-ac
 167
 168 define Device/aruba_glenmorangie
 169         $(call Device/FitImageLzma)
 170         DEVICE_VENDOR := Aruba
 171         SOC := qcom-ipq4029
 172 endef
 173
 174 define Device/aruba_ap-303
 175         $(call Device/aruba_glenmorangie)
 176         DEVICE_MODEL := AP-303
 177 endef
 178 TARGET_DEVICES += aruba_ap-303
 179
 180 define Device/aruba_ap-303h
 181         $(call Device/aruba_glenmorangie)
 182         DEVICE_MODEL := AP-303H
 183 endef
 184 TARGET_DEVICES += aruba_ap-303h
 185
 186 define Device/aruba_ap-365
 187         $(call Device/aruba_glenmorangie)
 188         DEVICE_MODEL := AP-365
 189         DEVICE_PACKAGES := kmod-hwmon-ad7418
 190 endef
 191 TARGET_DEVICES += aruba_ap-365
 192
 193 define Device/asus_map-ac2200
 194         $(call Device/FitImageLzma)
 195         DEVICE_VENDOR := ASUS
 196         DEVICE_MODEL := Lyra (MAP-AC2200)
 197         SOC := qcom-ipq4019
 198         DEVICE_PACKAGES := ath10k-firmware-qca9888-ct kmod-ath3k
 199 endef
 200 TARGET_DEVICES += asus_map-ac2200
 201
 202 # WARNING: this is an initramfs image that gets you half of the way there
 203 #          you need to delete the jffs2 ubi volume and sysupgrade to the final image
 204 # to get a "trx" you can flash via web UI for ac42u/ac58u:
 205 # - change call Device/FitImageLzma to Device/FitImage
 206 # - add the following below UIMAGE_NAME
 207 #   UIMAGE_MAGIC := 0x27051956
 208 #   IMAGES += factory.trx
 209 #   IMAGE/factory.trx := copy-file $(KDIR)/tmp/$$(KERNEL_INITRAMFS_IMAGE) | uImage none
 210 define Device/asus_rt-ac42u
 211         $(call Device/FitImageLzma)
 212         DEVICE_VENDOR := ASUS
 213         DEVICE_MODEL := RT-AC42U
 214         DEVICE_ALT0_VENDOR := ASUS
 215         DEVICE_ALT0_MODEL := RT-ACRH17
 216         DEVICE_ALT1_VENDOR := ASUS
 217         DEVICE_ALT1_MODEL := RT-AC2200
 218         SOC := qcom-ipq4019
 219         BLOCKSIZE := 128k
 220         PAGESIZE := 2048
 221         IMAGE_SIZE := 20439364
 222         FILESYSTEMS := squashfs
 223 #       RT-AC82U is nowhere to be found online
 224 #       Rather, this device is a/k/a RT-AC42U
 225 #       But we'll go with what the vendor firmware has...
 226         UIMAGE_NAME:=$(shell echo -e '\03\01\01\01RT-AC82U')
 227         DEVICE_PACKAGES := ath10k-firmware-qca9984-ct kmod-usb-ledtrig-usbport
 228 endef
 229 TARGET_DEVICES += asus_rt-ac42u
 230
 231 define Device/asus_rt-ac58u
 232         $(call Device/FitImageLzma)
 233         DEVICE_VENDOR := ASUS
 234         DEVICE_MODEL := RT-AC58U
 235         DEVICE_ALT0_VENDOR := ASUS
 236         DEVICE_ALT0_MODEL := RT-ACRH13
 237         SOC := qcom-ipq4018
 238         BLOCKSIZE := 128k
 239         PAGESIZE := 2048
 240         IMAGE_SIZE := 20439364
 241         FILESYSTEMS := squashfs
 242 #       Someone - in their infinite wisdom - decided to put the firmware
 243 #       version in front of the image name \03\00\00\04 => Version 3.0.0.4
 244 #       Since u-boot works with strings we either need another fixup step
 245 #       to add a version... or we are very careful not to add '\0' into that
 246 #       string and call it a day.... Yeah, we do the latter!
 247         UIMAGE_NAME:=$(shell echo -e '\03\01\01\01RT-AC58U')
 248         DEVICE_PACKAGES := -kmod-ath10k-ct kmod-ath10k-ct-smallbuffers \
 249                 kmod-usb-ledtrig-usbport
 250 endef
 251 TARGET_DEVICES += asus_rt-ac58u
 252
 253 define Device/avm_fritzbox-4040
 254         $(call Device/FitImageLzma)
 255         DEVICE_VENDOR := AVM
 256         DEVICE_MODEL := FRITZ!Box 4040
 257         SOC := qcom-ipq4018
 258         BOARD_NAME := fritz4040
 259         IMAGE_SIZE := 29056k
 260         UBOOT_PATH := $(STAGING_DIR_IMAGE)/uboot-fritz4040.bin
 261         UBOOT_PARTITION_SIZE := 524288
 262         IMAGES += eva.bin
 263         IMAGE/eva.bin := append-uboot | pad-to $$$$(UBOOT_PARTITION_SIZE) | append-kernel | append-rootfs | pad-rootfs
 264         IMAGE/sysupgrade.bin := append-kernel | append-rootfs | pad-rootfs | check-size | append-metadata
 265         DEVICE_PACKAGES := fritz-tffs fritz-caldata
 266 endef
 267 TARGET_DEVICES += avm_fritzbox-4040
 268
 269 define Device/avm_fritzbox-7530
 270         $(call Device/FitImageLzma)
 271         DEVICE_VENDOR := AVM
 272         DEVICE_MODEL := FRITZ!Box 7530
 273         DEVICE_ALT0_VENDOR := AVM
 274         DEVICE_ALT0_MODEL := FRITZ!Box 7520
 275         SOC := qcom-ipq4019
 276         DEVICE_PACKAGES := fritz-caldata fritz-tffs-nand ltq-vdsl-vr11-app
 277 endef
 278 TARGET_DEVICES += avm_fritzbox-7530
 279
 280 define Device/avm_fritzrepeater-1200
 281         $(call Device/FitImageLzma)
 282         DEVICE_VENDOR := AVM
 283         DEVICE_MODEL := FRITZ!Repeater 1200
 284         SOC := qcom-ipq4019
 285         DEVICE_PACKAGES := fritz-caldata fritz-tffs-nand
 286 endef
 287 TARGET_DEVICES += avm_fritzrepeater-1200
 288
 289 define Device/avm_fritzrepeater-3000
 290         $(call Device/FitImageLzma)
 291         DEVICE_VENDOR := AVM
 292         DEVICE_MODEL := FRITZ!Repeater 3000
 293         SOC := qcom-ipq4019
 294         DEVICE_PACKAGES := ath10k-firmware-qca9984-ct fritz-caldata fritz-tffs-nand
 295 endef
 296 TARGET_DEVICES += avm_fritzrepeater-3000
 297
 298 define Device/buffalo_wtr-m2133hp
 299         $(call Device/FitImage)
 300         $(call Device/UbiFit)
 301         DEVICE_VENDOR := Buffalo
 302         DEVICE_MODEL := WTR-M2133HP
 303         SOC := qcom-ipq4019
 304         DEVICE_PACKAGES := ath10k-firmware-qca9984-ct
 305         BLOCKSIZE := 128k
 306         PAGESIZE := 2048
 307 endef
 308 TARGET_DEVICES += buffalo_wtr-m2133hp
 309
 310 define Device/cellc_rtl30vw
 311         KERNEL_SUFFIX := -zImage.itb
 312         KERNEL_INITRAMFS = kernel-bin | gzip | fit gzip $$(KDIR)/image-$$(DEVICE_DTS).dtb
 313         KERNEL = kernel-bin | fit none $$(KDIR)/image-$$(DEVICE_DTS).dtb | uImage lzma | pad-to 2048
 314         KERNEL_NAME := zImage
 315         KERNEL_IN_UBI :=
 316         IMAGES := factory.bin sysupgrade.bin
 317         IMAGE/factory.bin := append-rootfshdr kernel | append-ubi | qsdk-ipq-factory-nand-askey kernel
 318         IMAGE/sysupgrade.bin := append-rootfshdr kernel | sysupgrade-tar kernel=$$$$@.kernel | append-metadata
 319         DEVICE_VENDOR := Cell C
 320         DEVICE_MODEL := RTL30VW
 321         SOC := qcom-ipq4019
 322         DEVICE_DTS_CONFIG := config@5
 323         KERNEL_INSTALL := 1
 324         KERNEL_SIZE := 4096k
 325         IMAGE_SIZE := 57344k
 326         BLOCKSIZE := 128k
 327         PAGESIZE := 2048
 328         DEVICE_PACKAGES := kmod-usb-net-qmi-wwan kmod-usb-serial-option uqmi
 329 endef
 330 TARGET_DEVICES += cellc_rtl30vw
 331
 332 define Device/cilab_meshpoint-one
 333         $(call Device/8dev_jalapeno-common)
 334         DEVICE_VENDOR := Crisis Innovation Lab
 335         DEVICE_MODEL := MeshPoint.One
 336         DEVICE_PACKAGES += kmod-i2c-gpio kmod-iio-bmp280-i2c kmod-hwmon-ina2xx kmod-rtc-pcf2127
 337 endef
 338 # Missing DSA Setup
 339 #TARGET_DEVICES += cilab_meshpoint-one
 340
 341 define Device/compex_wpj419
 342         $(call Device/FitImage)
 343         $(call Device/UbiFit)
 344         DEVICE_VENDOR := Compex
 345         DEVICE_MODEL := WPJ419
 346         SOC := qcom-ipq4019
 347         DEVICE_DTS_CONFIG := config@12
 348         KERNEL_INSTALL := 1
 349         BLOCKSIZE := 128k
 350         PAGESIZE := 2048
 351         FILESYSTEMS := squashfs
 352 endef
 353 # Missing DSA Setup
 354 #TARGET_DEVICES += compex_wpj419
 355
 356 define Device/compex_wpj428
 357         $(call Device/FitImage)
 358         DEVICE_VENDOR := Compex
 359         DEVICE_MODEL := WPJ428
 360         SOC := qcom-ipq4028
 361         DEVICE_DTS_CONFIG := config@4
 362         BLOCKSIZE := 64k
 363         IMAGE_SIZE := 31232k
 364         KERNEL_SIZE := 4096k
 365         IMAGES += cpximg-6a04.bin
 366         IMAGE/sysupgrade.bin := append-kernel | append-rootfs | pad-rootfs | append-metadata
 367         IMAGE/cpximg-6a04.bin := append-kernel | append-rootfs | pad-rootfs | mkmylofw_32m 0x8A2 3
 368         DEVICE_PACKAGES := kmod-gpio-beeper
 369         DEFAULT := n
 370 endef
 371 TARGET_DEVICES += compex_wpj428
 372
 373 define Device/devolo_magic-2-wifi-next
 374         $(call Device/FitzImage)
 375         DEVICE_VENDOR := devolo
 376         DEVICE_MODEL := Magic 2 WiFi next
 377         SOC := qcom-ipq4018
 378         KERNEL_SIZE := 4096k
 379
 380         # If the bootloader sees 0xDEADC0DE and this trailer at the 64k boundary of a TFTP image
 381         # it will bootm it, just like we want for the initramfs.
 382         KERNEL_INITRAMFS := kernel-bin | gzip | fit gzip $$(KDIR)/image-$$(DEVICE_DTS).dtb | pad-to 64k |\
 383                 append-string -e '\xDE\xAD\xC0\xDE{"fl_initramfs":""}\x00'
 384
 385         IMAGE_SIZE := 26624k
 386         IMAGES := sysupgrade.bin
 387         IMAGE/sysupgrade.bin := append-kernel | append-rootfs | pad-rootfs | append-metadata
 388         DEFAULT := n
 389 endef
 390 TARGET_DEVICES += devolo_magic-2-wifi-next
 391
 392 define Device/dlink_dap-2610
 393         $(call Device/FitImageLzma)
 394         DEVICE_VENDOR := D-Link
 395         DEVICE_MODEL := DAP-2610
 396         SOC := qcom-ipq4018
 397         DEVICE_DTS_CONFIG := config@ap.dk01.1-c1
 398         BLOCKSIZE := 64k
 399         WRGG_DEVNAME := /dev/mtdblock/8
 400         WRGG_SIGNATURE := wapac30_dkbs_dap2610
 401         IMAGE_SIZE := 14080k
 402         IMAGES += factory.bin
 403         # Bootloader expects a special 160 byte header which is added by
 404         # wrgg-image.
 405         # Factory image size must be larger than 6MB, and size in wrgg header must
 406         # match actual factory image size to be flashable from D-Link http server.
 407         # Bootloader verifies checksum of wrgg image before booting, thus jffs2
 408         # cannot be part of the wrgg image. This is solved in the factory image by
 409         # having the rootfs at the end of the image (without pad-rootfs). And in
 410         # the sysupgrade image only the kernel is included in the wrgg checksum,
 411         # but this is not flashable from the D-link http server.
 412         # append-rootfs must start on an erase block boundary.
 413         IMAGE/factory.bin    := append-kernel | pad-offset 6144k 160 | append-rootfs | wrgg-image | check-size
 414         IMAGE/sysupgrade.bin := append-kernel | wrgg-image | pad-to $$$$(BLOCKSIZE) | append-rootfs | pad-rootfs | check-size | append-metadata
 415 endef
 416 TARGET_DEVICES += dlink_dap-2610
 417
 418 define Device/edgecore_ecw5211
 419         $(call Device/FitImage)
 420         $(call Device/UbiFit)
 421         DEVICE_VENDOR := Edgecore
 422         DEVICE_MODEL := ECW5211
 423         SOC := qcom-ipq4018
 424         BLOCKSIZE := 128k
 425         PAGESIZE := 2048
 426         DEVICE_DTS_CONFIG := config@ap.dk01.1-c2
 427         DEVICE_PACKAGES := kmod-tpm-i2c-atmel kmod-usb-acm
 428 endef
 429 TARGET_DEVICES += edgecore_ecw5211
 430
 431 define Device/edgecore_oap100
 432         $(call Device/FitImage)
 433         $(call Device/UbiFit)
 434         DEVICE_VENDOR := Edgecore
 435         DEVICE_MODEL := OAP100
 436         SOC := qcom-ipq4019
 437         BLOCKSIZE := 128k
 438         PAGESIZE := 2048
 439         IMAGES := sysupgrade.bin
 440         DEVICE_DTS_CONFIG := config@ap.dk07.1-c1
 441         DEVICE_PACKAGES := kmod-usb-acm kmod-usb-net kmod-usb-net-cdc-qmi uqmi
 442 endef
 443 # Missing DSA Setup
 444 #TARGET_DEVICES += edgecore_oap100
 445
 446 define Device/engenius_eap1300
 447         $(call Device/FitImage)
 448         DEVICE_VENDOR := EnGenius
 449         DEVICE_MODEL := EAP1300
 450         DEVICE_DTS_CONFIG := config@4
 451         BOARD_NAME := eap1300
 452         SOC := qcom-ipq4018
 453         KERNEL_SIZE := 5120k
 454         IMAGE_SIZE := 25344k
 455         IMAGE/sysupgrade.bin := append-kernel | append-rootfs | pad-rootfs | append-metadata
 456 endef
 457 # Missing DSA Setup
 458 #TARGET_DEVICES += engenius_eap1300
 459
 460 define Device/engenius_eap2200
 461         $(call Device/FitImage)
 462         $(call Device/UbiFit)
 463         DEVICE_VENDOR := EnGenius
 464         DEVICE_MODEL := EAP2200
 465         SOC := qcom-ipq4019
 466         BLOCKSIZE := 128k
 467         PAGESIZE := 2048
 468         DEVICE_PACKAGES := ath10k-firmware-qca9888-ct -kmod-ath10k-ct kmod-ath10k-ct-smallbuffers
 469 endef
 470 # Missing DSA Setup
 471 #TARGET_DEVICES += engenius_eap2200
 472
 473 define Device/engenius_emd1
 474         $(call Device/FitImage)
 475         DEVICE_VENDOR := EnGenius
 476         DEVICE_MODEL := EMD1
 477         DEVICE_DTS_CONFIG := config@4
 478         SOC := qcom-ipq4018
 479         IMAGE_SIZE := 30720k
 480         IMAGES += factory.bin
 481         IMAGE/sysupgrade.bin := append-kernel | append-rootfs | pad-rootfs | append-metadata
 482         IMAGE/factory.bin := qsdk-ipq-factory-nor | check-size
 483 endef
 484 # Missing DSA Setup
 485 #TARGET_DEVICES += engenius_emd1
 486
 487 define Device/engenius_emr3500
 488         $(call Device/FitImage)
 489         DEVICE_VENDOR := EnGenius
 490         DEVICE_MODEL := EMR3500
 491         DEVICE_DTS_CONFIG := config@4
 492         SOC := qcom-ipq4018
 493         KERNEL_SIZE := 4096k
 494         IMAGE_SIZE := 30720k
 495         IMAGES += factory.bin
 496         IMAGE/sysupgrade.bin := append-kernel | append-rootfs | pad-rootfs | append-metadata
 497         IMAGE/factory.bin := qsdk-ipq-factory-nor | check-size
 498         DEFAULT := n
 499 endef
 500 # Missing DSA Setup
 501 #TARGET_DEVICES += engenius_emr3500
 502
 503 define Device/engenius_ens620ext
 504         $(call Device/FitImage)
 505         DEVICE_VENDOR := EnGenius
 506         DEVICE_MODEL := ENS620EXT
 507         SOC := qcom-ipq4018
 508         DEVICE_DTS_CONFIG := config@4
 509         BLOCKSIZE := 64k
 510         PAGESIZE := 256
 511         BOARD_NAME := ENS620EXT
 512         VENDOR_ID := 0x0101
 513         PRODUCT_ID := 0x79
 514         PRODUCT_ID_NEW := 0xA4
 515         DATECODE := 190507
 516         FW_VER := 3.1.2
 517         FW_VER_NEW := 3.5.6
 518         CW_VER := 1.8.99
 519         IMAGE_SIZE := 21312k
 520         KERNEL_SIZE := 5120k
 521         FILESYSTEMS := squashfs
 522         IMAGES += factory_30.bin factory_35.bin
 523         IMAGE/sysupgrade.bin := append-kernel | append-rootfs | pad-rootfs | check-size | append-metadata
 524         IMAGE/factory_30.bin := append-kernel | pad-to $$$$(KERNEL_SIZE) | append-rootfs | pad-rootfs | check-size | SenaoFW $$$$(PRODUCT_ID) $$$$(FW_VER)
 525         IMAGE/factory_35.bin := qsdk-ipq-factory-nor | check-size | SenaoFW $$$$(PRODUCT_ID_NEW) $$$$(FW_VER_NEW)
 526 endef
 527 # Missing DSA Setup
 528 #TARGET_DEVICES += engenius_ens620ext
 529
 530 define Device/extreme-networks_ws-ap3915i
 531         $(call Device/FitImage)
 532         DEVICE_VENDOR := Extreme Networks
 533         DEVICE_MODEL := WS-AP3915i
 534         IMAGE_SIZE := 30080k
 535         SOC := qcom-ipq4029
 536         BLOCKSIZE := 128k
 537         IMAGE/sysupgrade.bin := append-kernel | append-rootfs | pad-rootfs | check-size | append-metadata
 538 endef
 539 TARGET_DEVICES += extreme-networks_ws-ap3915i
 540
 541 define Device/ezviz_cs-w3-wd1200g-eup
 542         $(call Device/FitImage)
 543         DEVICE_VENDOR := EZVIZ
 544         DEVICE_MODEL := CS-W3-WD1200G
 545         DEVICE_VARIANT := EUP
 546         IMAGE_SIZE := 14848k
 547         KERNEL_SIZE = 6m
 548         SOC := qcom-ipq4018
 549         IMAGE/sysupgrade.bin := append-kernel | append-rootfs | pad-rootfs | \
 550                 append-metadata
 551         DEVICE_PACKAGES := -kmod-ath10k-ct kmod-ath10k-ct-smallbuffers
 552         DEVICE_COMPAT_VERSION := 2.0
 553         DEVICE_COMPAT_MESSAGE := uboot's bootcmd has to be updated (see wiki). \
 554                 Upgrade via sysupgrade mechanism is not possible.
 555 endef
 556 TARGET_DEVICES += ezviz_cs-w3-wd1200g-eup
 557
 558 define Device/glinet_gl-a1300
 559         $(call Device/FitImage)
 560         $(call Device/UbiFit)
 561         DEVICE_VENDOR := GL.iNet
 562         DEVICE_MODEL := GL-A1300
 563         SOC := qcom-ipq4018
 564         DEVICE_DTS_CONFIG := config@ap.dk01.1-c2
 565         BLOCKSIZE := 128k
 566         PAGESIZE := 2048
 567         IMAGE_SIZE := 131072k
 568 endef
 569 TARGET_DEVICES += glinet_gl-a1300
 570
 571 define Device/glinet_gl-ap1300
 572         $(call Device/FitImage)
 573         $(call Device/UbiFit)
 574         DEVICE_VENDOR := GL.iNet
 575         DEVICE_MODEL := GL-AP1300
 576         SOC := qcom-ipq4018
 577         DEVICE_DTS_CONFIG := config@ap.dk01.1-c2
 578         BLOCKSIZE := 128k
 579         PAGESIZE := 2048
 580         IMAGE_SIZE := 131072k
 581         KERNEL_INSTALL := 1
 582         DEVICE_PACKAGES := kmod-usb-net-qmi-wwan kmod-usb-serial-option uqmi
 583 endef
 584 TARGET_DEVICES += glinet_gl-ap1300
 585
 586 define Device/glinet_gl-b1300
 587         $(call Device/FitzImage)
 588         DEVICE_VENDOR := GL.iNet
 589         DEVICE_MODEL := GL-B1300
 590         BOARD_NAME := gl-b1300
 591         SOC := qcom-ipq4029
 592         KERNEL_SIZE := 4096k
 593         IMAGE_SIZE := 26624k
 594         IMAGE/sysupgrade.bin := append-kernel |append-rootfs | pad-rootfs | append-metadata
 595 endef
 596 TARGET_DEVICES += glinet_gl-b1300
 597
 598 define Device/glinet_gl-b2200
 599         $(call Device/FitzImage)
 600         DEVICE_VENDOR := GL.iNet
 601         DEVICE_MODEL := GL-B2200
 602         SOC := qcom-ipq4019
 603         DEVICE_DTS_CONFIG := config@ap.dk04.1-c3
 604         KERNEL_INITRAMFS_SUFFIX := -recovery.itb
 605         IMAGES := emmc.img.gz sysupgrade.bin
 606         IMAGE/emmc.img.gz := qsdk-ipq-app-gpt |\
 607                 pad-to 1024k | append-kernel |\
 608                 pad-to 33792k | append-rootfs |\
 609                 append-metadata | gzip
 610         IMAGE/sysupgrade.bin := sysupgrade-tar | append-metadata
 611         DEVICE_PACKAGES := ath10k-firmware-qca9888-ct \
 612                 kmod-fs-ext4 kmod-mmc kmod-spi-dev mkf2fs e2fsprogs kmod-fs-f2fs
 613 endef
 614 TARGET_DEVICES += glinet_gl-b2200
 615
 616 define Device/glinet_gl-s1300
 617         $(call Device/FitzImage)
 618         DEVICE_VENDOR := GL.iNet
 619         DEVICE_MODEL := GL-S1300
 620         SOC := qcom-ipq4029
 621         KERNEL_SIZE := 4096k
 622         IMAGE_SIZE := 26624k
 623         IMAGES := sysupgrade.bin
 624         IMAGE/sysupgrade.bin := append-kernel | append-rootfs | pad-rootfs | append-metadata
 625         DEVICE_PACKAGES := kmod-fs-ext4 kmod-mmc kmod-spi-dev
 626 endef
 627 # Missing DSA Setup
 628 #TARGET_DEVICES += glinet_gl-s1300
 629
 630 define Device/kernel-size-6350-8300
 631         DEVICE_COMPAT_VERSION := 2.0
 632         DEVICE_COMPAT_MESSAGE := Kernel partition size must be increased for \
 633         this OpenWrt version. Before continuing, you MUST issue either the \
 634         command "fw_setenv kernsize 500000" from the OpenWrt command line, \
 635         or "setenv kernsize 500000 ; saveenv" from the U-Boot serial console. \
 636         Instead of the sysupgrade image, you must then install the OpenWrt \
 637         factory image, setting the force flag and wiping the configuration. \
 638         (e.g. "sysupgrade -n -F openwrt-squashfs-factory.bin" on command line)
 639 endef
 640
 641 define Device/linksys_ea6350v3
 642         # The Linksys EA6350v3 has a uboot bootloader that does not
 643         # support either booting lzma kernel images nor booting UBI
 644         # partitions. This uboot, however, supports raw kernel images and
 645         # gzipped images.
 646         #
 647         # As configured by the OEM factory, the device will boot the kernel
 648         # from a fixed address with a fixed length of 3 MiB. Also, the
 649         # device has a hard-coded kernel command line that requires the
 650         # rootfs and alt_rootfs to be in mtd11 and mtd13 respectively.
 651         # Oh... and the kernel partition overlaps with the rootfs
 652         # partition (the same for alt_kernel and alt_rootfs).
 653         #
 654         # If you are planing re-partitioning the device, you may want to
 655         # keep these details in mind:
 656         # 1. The kernel addresses you should honor are 0x00000000 and
 657         #    0x02800000 respectively.
 658         # 2. The kernel size (plus the dtb) cannot exceed 3 MiB in size
 659         #    unless the uboot environment variable "kernsize" is increased.
 660         # 3. You can use 'zImage', but not a raw 'Image' packed with lzma.
 661         # 4. The kernel command line from uboot is harcoded to boot with
 662         #    rootfs either in mtd11 or mtd13.
 663         $(call Device/FitzImage)
 664         $(call Device/kernel-size-6350-8300)
 665         DEVICE_VENDOR := Linksys
 666         DEVICE_MODEL := EA6350
 667         DEVICE_VARIANT := v3
 668         SOC := qcom-ipq4018
 669         BLOCKSIZE := 128k
 670         PAGESIZE := 2048
 671         KERNEL_SIZE := 5120k
 672         IMAGE_SIZE := 35840k
 673         UBINIZE_OPTS := -E 5
 674         IMAGES += factory.bin
 675         IMAGE/factory.bin := append-kernel | append-uImage-fakehdr filesystem | pad-to $$$$(KERNEL_SIZE) | append-ubi | linksys-image type=EA6350v3
 676 endef
 677 TARGET_DEVICES += linksys_ea6350v3
 678
 679 define Device/linksys_ea8300
 680         $(call Device/FitzImage)
 681         $(call Device/kernel-size-6350-8300)
 682         DEVICE_VENDOR := Linksys
 683         DEVICE_MODEL := EA8300
 684         SOC := qcom-ipq4019
 685         KERNEL_SIZE := 5120k
 686         IMAGE_SIZE := 84992k
 687         BLOCKSIZE := 128k
 688         PAGESIZE := 2048
 689         UBINIZE_OPTS := -E 5    # EOD marks to "hide" factory sig at EOF
 690         IMAGES += factory.bin
 691         IMAGE/factory.bin  := append-kernel | pad-to $$$$(KERNEL_SIZE) | append-ubi | linksys-image type=EA8300
 692         DEVICE_PACKAGES := ath10k-firmware-qca9888-ct kmod-usb-ledtrig-usbport
 693 endef
 694 TARGET_DEVICES += linksys_ea8300
 695
 696 define Device/linksys_mr8300
 697         $(call Device/FitzImage)
 698         $(call Device/kernel-size-6350-8300)
 699         DEVICE_VENDOR := Linksys
 700         DEVICE_MODEL := MR8300
 701         SOC := qcom-ipq4019
 702         KERNEL_SIZE := 5120k
 703         IMAGE_SIZE := 84992k
 704         BLOCKSIZE := 128k
 705         PAGESIZE := 2048
 706         UBINIZE_OPTS := -E 5    # EOD marks to "hide" factory sig at EOF
 707         IMAGES += factory.bin
 708         IMAGE/factory.bin  := append-kernel | pad-to $$$$(KERNEL_SIZE) | append-ubi | linksys-image type=MR8300
 709         DEVICE_PACKAGES := ath10k-firmware-qca9888-ct kmod-usb-ledtrig-usbport
 710 endef
 711 TARGET_DEVICES += linksys_mr8300
 712
 713 define Device/linksys_whw03v2
 714         $(call Device/FitzImage)
 715         DEVICE_VENDOR := Linksys
 716         DEVICE_MODEL := WHW03
 717         DEVICE_VARIANT := V2
 718         SOC := qcom-ipq4019
 719         KERNEL_SIZE := 6144k
 720         IMAGE_SIZE := 158720k
 721         BLOCKSIZE := 128k
 722         PAGESIZE := 2048
 723         UBINIZE_OPTS := -E 5    # EOD marks to "hide" factory sig at EOF
 724         IMAGES += factory.bin
 725         IMAGE/factory.bin  := append-kernel | pad-to $$$$(KERNEL_SIZE) | append-ubi | linksys-image type=WHW03v2
 726         DEVICE_PACKAGES := ath10k-firmware-qca9888-ct kmod-leds-pca963x kmod-spi-dev kmod-bluetooth
 727 endef
 728 TARGET_DEVICES += linksys_whw03v2
 729
 730 define Device/linksys_whw01
 731         $(call Device/FitzImage)
 732         DEVICE_VENDOR := Linksys
 733         DEVICE_MODEL := WHW01
 734         KERNEL_SIZE := 6144k
 735         IMAGE_SIZE := 75776K
 736         SOC := qcom-ipq4018
 737         BLOCKSIZE := 128k
 738         PAGESIZE := 2048
 739         UBINIZE_OPTS := -E 5    # EOD marks to "hide" factory sig at EOF
 740         IMAGES += factory.bin
 741         IMAGE/factory.bin := append-kernel | pad-to $$$$(KERNEL_SIZE) | append-ubi | linksys-image type=WHW01
 742         DEVICE_PACKAGES := uboot-envtools kmod-leds-pca963x
 743 endef
 744 TARGET_DEVICES += linksys_whw01
 745
 746 define Device/luma_wrtq-329acn
 747         $(call Device/FitImage)
 748         DEVICE_VENDOR := Luma Home
 749         DEVICE_MODEL := WRTQ-329ACN
 750         SOC := qcom-ipq4018
 751         DEVICE_PACKAGES := kmod-ath3k kmod-eeprom-at24 kmod-i2c-gpio
 752         IMAGE_SIZE := 76632k
 753         BLOCKSIZE := 128k
 754         PAGESIZE := 2048
 755 endef
 756 TARGET_DEVICES += luma_wrtq-329acn
 757
 758 define Device/meraki_common
 759         $(call Device/FitImage)
 760         DEVICE_VENDOR := Cisco Meraki
 761         SOC := qcom-ipq4029
 762         BLOCKSIZE := 128k
 763         PAGESIZE := 2048
 764         DEVICE_DTS_LOADADDR := 0x89000000
 765         DEVICE_PACKAGES := ath10k-firmware-qca9887-ct
 766 endef
 767
 768 define Device/meraki_mr33
 769         $(call Device/meraki_common)
 770         DEVICE_MODEL := MR33
 771 endef
 772 TARGET_DEVICES += meraki_mr33
 773
 774 define Device/meraki_mr74
 775         $(call Device/meraki_common)
 776         DEVICE_MODEL := MR74
 777         DEVICE_DTS_CONFIG := config@3
 778 endef
 779 TARGET_DEVICES += meraki_mr74
 780
 781 define Device/mobipromo_cm520-79f
 782         $(call Device/FitzImage)
 783         $(call Device/UbiFit)
 784         DEVICE_VENDOR := MobiPromo
 785         DEVICE_MODEL := CM520-79F
 786         SOC := qcom-ipq4019
 787         BLOCKSIZE := 128k
 788         PAGESIZE := 2048
 789         DEVICE_PACKAGES := kmod-usb-ledtrig-usbport
 790 endef
 791 TARGET_DEVICES += mobipromo_cm520-79f
 792
 793 define Device/netgear_ex61x0v2
 794         $(call Device/DniImage)
 795         DEVICE_VENDOR := NETGEAR
 796         DEVICE_DTS_CONFIG := config@4
 797         NETGEAR_BOARD_ID := EX6150v2series
 798         NETGEAR_HW_ID := 29765285+16+0+128+2x2
 799         IMAGE_SIZE := 14400k
 800         SOC := qcom-ipq4018
 801 endef
 802
 803 define Device/netgear_ex6100v2
 804         $(call Device/netgear_ex61x0v2)
 805         DEVICE_MODEL := EX6100
 806         DEVICE_VARIANT := v2
 807 endef
 808 TARGET_DEVICES += netgear_ex6100v2
 809
 810 define Device/netgear_ex6150v2
 811         $(call Device/netgear_ex61x0v2)
 812         DEVICE_MODEL := EX6150
 813         DEVICE_VARIANT := v2
 814 endef
 815 TARGET_DEVICES += netgear_ex6150v2
 816
 817 define Device/netgear_orbi
 818         $(call Device/DniImage)
 819         SOC := qcom-ipq4019
 820         DEVICE_VENDOR := NETGEAR
 821         IMAGE/factory.img := append-kernel | pad-offset 128k 64 | \
 822                 append-uImage-fakehdr filesystem | pad-to $$$$(KERNEL_SIZE) | \
 823                 append-rootfs | pad-rootfs | netgear-dni
 824         IMAGE/sysupgrade.bin/squashfs := append-rootfs | pad-to 64k | \
 825                 sysupgrade-tar rootfs=$$$$@ | append-metadata
 826         DEVICE_PACKAGES := ath10k-firmware-qca9984-ct e2fsprogs kmod-fs-ext4 losetup
 827 endef
 828
 829 define Device/netgear_rbx40
 830         $(call Device/netgear_orbi)
 831         NETGEAR_HW_ID := 29765515+0+4096+512+2x2+2x2+2x2
 832         KERNEL_SIZE := 3932160
 833         ROOTFS_SIZE := 32243712
 834         IMAGE_SIZE := 36175872
 835 endef
 836
 837 define Device/netgear_rbr40
 838         $(call Device/netgear_rbx40)
 839         DEVICE_MODEL := RBR40
 840         DEVICE_VARIANT := v1
 841         NETGEAR_BOARD_ID := RBR40
 842 endef
 843 TARGET_DEVICES += netgear_rbr40
 844
 845 define Device/netgear_rbs40
 846         $(call Device/netgear_rbx40)
 847         DEVICE_MODEL := RBS40
 848         DEVICE_VARIANT := v1
 849         NETGEAR_BOARD_ID := RBS40
 850 endef
 851 TARGET_DEVICES += netgear_rbs40
 852
 853 define Device/netgear_rbx50
 854         $(call Device/netgear_orbi)
 855         NETGEAR_HW_ID := 29765352+0+4000+512+2x2+2x2+4x4
 856         KERNEL_SIZE := 3932160
 857         ROOTFS_SIZE := 32243712
 858         IMAGE_SIZE := 36175872
 859 endef
 860
 861 define Device/netgear_rbr50
 862         $(call Device/netgear_rbx50)
 863         DEVICE_MODEL := RBR50
 864         DEVICE_VARIANT := v1
 865         NETGEAR_BOARD_ID := RBR50
 866 endef
 867 TARGET_DEVICES += netgear_rbr50
 868
 869 define Device/netgear_rbs50
 870         $(call Device/netgear_rbx50)
 871         DEVICE_MODEL := RBS50
 872         DEVICE_VARIANT := v1
 873         NETGEAR_BOARD_ID := RBS50
 874 endef
 875 TARGET_DEVICES += netgear_rbs50
 876
 877 define Device/netgear_srx60
 878         $(call Device/netgear_orbi)
 879         NETGEAR_HW_ID := 29765352+0+4096+512+2x2+2x2+4x4
 880         KERNEL_SIZE := 3932160
 881         ROOTFS_SIZE := 32243712
 882         IMAGE_SIZE := 36175872
 883 endef
 884
 885 define Device/netgear_srr60
 886         $(call Device/netgear_srx60)
 887         DEVICE_MODEL := SRR60
 888         NETGEAR_BOARD_ID := SRR60
 889 endef
 890 TARGET_DEVICES += netgear_srr60
 891
 892 define Device/netgear_srs60
 893         $(call Device/netgear_srx60)
 894         DEVICE_MODEL := SRS60
 895         NETGEAR_BOARD_ID := SRS60
 896 endef
 897 TARGET_DEVICES += netgear_srs60
 898
 899 define Device/netgear_wac510
 900         $(call Device/FitImage)
 901         $(call Device/UbiFit)
 902         DEVICE_VENDOR := Netgear
 903         DEVICE_MODEL := WAC510
 904         SOC := qcom-ipq4018
 905         DEVICE_DTS_CONFIG := config@5
 906         BLOCKSIZE := 128k
 907         PAGESIZE := 2048
 908         IMAGES += factory.tar
 909         IMAGE/factory.tar := append-ubi | wac5xx-netgear-tar
 910         DEVICE_PACKAGES := uboot-envtools
 911 endef
 912 TARGET_DEVICES += netgear_wac510
 913
 914 define Device/openmesh_a42
 915         $(call Device/FitImageLzma)
 916         DEVICE_VENDOR := OpenMesh
 917         DEVICE_MODEL := A42
 918         SOC := qcom-ipq4018
 919         DEVICE_DTS_CONFIG := config@om.a42
 920         BLOCKSIZE := 64k
 921         KERNEL = kernel-bin | lzma | fit lzma $$(KDIR)/image-$$(DEVICE_DTS).dtb | pad-to $$(BLOCKSIZE)
 922         IMAGE_SIZE := 15616k
 923         IMAGES += factory.bin
 924         IMAGE/factory.bin := append-rootfs | pad-rootfs | openmesh-image ce_type=A42
 925         IMAGE/sysupgrade.bin/squashfs := append-rootfs | pad-rootfs | sysupgrade-tar rootfs=$$$$@ | append-metadata
 926 endef
 927 TARGET_DEVICES += openmesh_a42
 928
 929 define Device/openmesh_a62
 930         $(call Device/FitImageLzma)
 931         DEVICE_VENDOR := OpenMesh
 932         DEVICE_MODEL := A62
 933         SOC := qcom-ipq4019
 934         DEVICE_DTS_CONFIG := config@om.a62
 935         BLOCKSIZE := 64k
 936         KERNEL = kernel-bin | lzma | fit lzma $$(KDIR)/image-$$(DEVICE_DTS).dtb | pad-to $$(BLOCKSIZE)
 937         IMAGE_SIZE := 15552k
 938         IMAGES += factory.bin
 939         IMAGE/factory.bin := append-rootfs | pad-rootfs | openmesh-image ce_type=A62
 940         IMAGE/sysupgrade.bin/squashfs := append-rootfs | pad-rootfs | sysupgrade-tar rootfs=$$$$@ | append-metadata
 941         DEVICE_PACKAGES := ath10k-firmware-qca9888-ct
 942 endef
 943 TARGET_DEVICES += openmesh_a62
 944
 945 define Device/p2w_r619ac
 946         $(call Device/FitzImage)
 947         $(call Device/UbiFit)
 948         DEVICE_VENDOR := P&W
 949         DEVICE_MODEL := R619AC
 950         SOC := qcom-ipq4019
 951         DEVICE_DTS_CONFIG := config@10
 952         BLOCKSIZE := 128k
 953         PAGESIZE := 2048
 954 endef
 955
 956 define Device/p2w_r619ac-64m
 957         $(call Device/p2w_r619ac)
 958         DEVICE_VARIANT := 64M NAND
 959         IMAGES += factory.bin
 960         IMAGE/factory.bin := append-ubi | qsdk-ipq-factory-nand
 961 endef
 962 TARGET_DEVICES += p2w_r619ac-64m
 963
 964 define Device/p2w_r619ac-128m
 965         $(call Device/p2w_r619ac)
 966         DEVICE_VARIANT := 128M NAND
 967 endef
 968 TARGET_DEVICES += p2w_r619ac-128m
 969
 970 define Device/pakedge_wr-1
 971         $(call Device/FitImageLzma)
 972         DEVICE_VENDOR := Pakedge
 973         DEVICE_MODEL := WR-1
 974         DEVICE_DTS_CONFIG := config@ap.dk01.1-c1
 975         SOC := qcom-ipq4018
 976         BLOCKSIZE := 64k
 977         IMAGE_SIZE := 31232k
 978         IMAGE/sysupgrade.bin := append-kernel | pad-to $$$$(BLOCKSIZE) | append-rootfs | pad-rootfs | append-metadata
 979 endef
 980 TARGET_DEVICES += pakedge_wr-1
 981
 982 define Device/plasmacloud_pa1200
 983         $(call Device/FitImageLzma)
 984         DEVICE_VENDOR := Plasma Cloud
 985         DEVICE_MODEL := PA1200
 986         SOC := qcom-ipq4018
 987         DEVICE_DTS_CONFIG := config@pc.pa1200
 988         BLOCKSIZE := 64k
 989         KERNEL = kernel-bin | lzma | fit lzma $$(KDIR)/image-$$(DEVICE_DTS).dtb | pad-to $$(BLOCKSIZE)
 990         IMAGE_SIZE := 15616k
 991         IMAGES += factory.bin
 992         IMAGE/factory.bin := append-rootfs | pad-rootfs | openmesh-image ce_type=PA1200
 993         IMAGE/sysupgrade.bin/squashfs := append-rootfs | pad-rootfs | sysupgrade-tar rootfs=$$$$@ | append-metadata
 994 endef
 995 TARGET_DEVICES += plasmacloud_pa1200
 996
 997 define Device/plasmacloud_pa2200
 998         $(call Device/FitImageLzma)
 999         DEVICE_VENDOR := Plasma Cloud
1000         DEVICE_MODEL := PA2200
1001         SOC := qcom-ipq4019
1002         DEVICE_DTS_CONFIG := config@pc.pa2200
1003         BLOCKSIZE := 64k
1004         KERNEL = kernel-bin | lzma | fit lzma $$(KDIR)/image-$$(DEVICE_DTS).dtb | pad-to $$(BLOCKSIZE)
1005         IMAGE_SIZE := 15552k
1006         IMAGES += factory.bin
1007         IMAGE/factory.bin := append-rootfs | pad-rootfs | openmesh-image ce_type=PA2200
1008         IMAGE/sysupgrade.bin/squashfs := append-rootfs | pad-rootfs | sysupgrade-tar rootfs=$$$$@ | append-metadata
1009         DEVICE_PACKAGES := ath10k-firmware-qca9888-ct
1010 endef
1011 TARGET_DEVICES += plasmacloud_pa2200
1012
1013 define Device/qxwlan_e2600ac-c1
1014         $(call Device/FitImage)
1015         DEVICE_VENDOR := Qxwlan
1016         DEVICE_MODEL := E2600AC
1017         DEVICE_VARIANT := C1
1018         BOARD_NAME := e2600ac-c1
1019         SOC := qcom-ipq4019
1020         IMAGE_SIZE := 31232k
1021         IMAGE/sysupgrade.bin := append-kernel | append-rootfs | pad-rootfs | append-metadata
1022 endef
1023 TARGET_DEVICES += qxwlan_e2600ac-c1
1024
1025 define Device/qxwlan_e2600ac-c2
1026         $(call Device/FitImage)
1027         $(call Device/UbiFit)
1028         DEVICE_VENDOR := Qxwlan
1029         DEVICE_MODEL := E2600AC
1030         DEVICE_VARIANT := C2
1031         SOC := qcom-ipq4019
1032         KERNEL_INSTALL := 1
1033         BLOCKSIZE := 128k
1034         PAGESIZE := 2048
1035 endef
1036 TARGET_DEVICES += qxwlan_e2600ac-c2
1037
1038 define Device/sony_ncp-hg100-cellular
1039         $(call Device/FitImage)
1040         DEVICE_VENDOR := Sony
1041         DEVICE_MODEL := NCP-HG100/Cellular
1042         DEVICE_DTS_CONFIG := config@ap.dk04.1-c4
1043         SOC := qcom-ipq4019
1044         KERNEL_SIZE := 8192k
1045         IMAGE_SIZE := 128m
1046         DEVICE_PACKAGES := e2fsprogs kmod-fs-ext4 uqmi
1047 endef
1048 TARGET_DEVICES += sony_ncp-hg100-cellular
1049
1050 define Device/teltonika_rutx10
1051         $(call Device/FitImage)
1052         $(call Device/UbiFit)
1053         DEVICE_VENDOR := Teltonika
1054         DEVICE_MODEL := RUTX10
1055         SOC := qcom-ipq4018
1056         DEVICE_DTS_CONFIG := config@5
1057         KERNEL_INSTALL := 1
1058         BLOCKSIZE := 128k
1059         PAGESIZE := 2048
1060         FILESYSTEMS := squashfs
1061         IMAGE/factory.ubi := append-ubi | qsdk-ipq-factory-nand | append-rutx-metadata
1062         DEVICE_PACKAGES := kmod-bluetooth
1063 endef
1064 # Missing DSA Setup
1065 #TARGET_DEVICES += teltonika_rutx10
1066
1067 define Device/teltonika_rutx50
1068         $(call Device/FitImage)
1069         $(call Device/UbiFit)
1070         DEVICE_VENDOR := Teltonika
1071         DEVICE_MODEL := RUTX50
1072         SOC := qcom-ipq4018
1073         DEVICE_DTS_CONFIG := config@5
1074         KERNEL_INSTALL := 1
1075         BLOCKSIZE := 128k
1076         PAGESIZE := 2048
1077         FILESYSTEMS := squashfs
1078         IMAGE/factory.ubi := append-ubi
1079         DEVICE_PACKAGES := ipq-wifi-teltonika_rutx kmod-usb-net-qmi-wwan kmod-usb-serial-option uqmi
1080 endef
1081 TARGET_DEVICES += teltonika_rutx50
1082
1083 define Device/tel_x1pro
1084         $(call Device/FitImage)
1085         DEVICE_VENDOR := Telco
1086         DEVICE_MODEL := X1 Pro
1087         SOC := qcom-ipq4019
1088         KERNEL_SIZE := 4096k
1089         IMAGE_SIZE := 31232k
1090         IMAGE/sysupgrade.bin := append-kernel | append-rootfs | pad-rootfs | append-metadata
1091         DEVICE_PACKAGES := kmod-usb-net-qmi-wwan kmod-usb-serial-option uqmi
1092         DEFAULT := n
1093 endef
1094 # Missing DSA Setup
1095 #TARGET_DEVICES += tel_x1pro
1096
1097 define Device/unielec_u4019-32m
1098         $(call Device/FitImage)
1099         DEVICE_VENDOR := Unielec
1100         DEVICE_MODEL := U4019
1101         DEVICE_VARIANT := 32M
1102         BOARD_NAME := u4019-32m
1103         SOC := qcom-ipq4019
1104         KERNEL_SIZE := 4096k
1105         IMAGE_SIZE := 31232k
1106         IMAGE/sysupgrade.bin := append-kernel | append-rootfs | pad-rootfs | append-metadata
1107         DEFAULT := n
1108 endef
1109 # Missing DSA Setup
1110 #TARGET_DEVICES += unielec_u4019-32m
1111
1112 define Device/wallys_dr40x9
1113         $(call Device/FitImage)
1114         $(call Device/UbiFit)
1115         DEVICE_VENDOR := Wallys
1116         DEVICE_MODEL := DR40X9
1117         SOC := qcom-ipq40x9
1118         DEVICE_DTS_CONFIG := config@ap.dk07.1-c1
1119         BLOCKSIZE := 128k
1120         PAGESIZE := 2048
1121         DEVICE_PACKAGES := ipq-wifi-wallys_dr40x9
1122 endef
1123 TARGET_DEVICES += wallys_dr40x9
1124
1125 define Device/yyets_le1
1126         $(call Device/FitzImage)
1127         DEVICE_VENDOR := YYeTs
1128         DEVICE_MODEL := LE1
1129         SOC := qcom-ipq4019
1130         KERNEL_SIZE := 4096k
1131         IMAGE_SIZE := 31232k
1132         IMAGES += factory.bin
1133         IMAGE/factory.bin := qsdk-ipq-factory-nor | check-size
1134         IMAGE/sysupgrade.bin := append-kernel | append-rootfs | pad-rootfs | append-metadata
1135         DEVICE_PACKAGES := ipq-wifi-yyets_le1 kmod-usb-ledtrig-usbport
1136 endef
1137 TARGET_DEVICES += yyets_le1
1138
1139 define Device/zte_mf18a
1140         $(call Device/FitImage)
1141         DEVICE_VENDOR := ZTE
1142         DEVICE_MODEL := MF18A
1143         SOC := qcom-ipq4019
1144         DEVICE_DTS_CONFIG := config@ap.dk04.1-c1
1145         BLOCKSIZE := 128k
1146         PAGESIZE := 2048
1147         KERNEL_IN_UBI := 1
1148         DEVICE_PACKAGES := ath10k-firmware-qca99x0-ct
1149 endef
1150 TARGET_DEVICES += zte_mf18a
1151
1152 define Device/zte_mf28x_common
1153         $(call Device/FitzImage)
1154         DEVICE_VENDOR := ZTE
1155         SOC := qcom-ipq4019
1156         DEVICE_DTS_CONFIG := config@ap.dk04.1-c1
1157         BLOCKSIZE := 128k
1158         PAGESIZE := 2048
1159         KERNEL_IN_UBI := 1
1160         DEVICE_PACKAGES := kmod-usb-net-qmi-wwan kmod-usb-serial-option uqmi
1161 endef
1162
1163 define Device/zte_mf286d
1164         $(call Device/zte_mf28x_common)
1165         DEVICE_MODEL := MF286D
1166 endef
1167 TARGET_DEVICES += zte_mf286d
1168
1169 define Device/zte_mf287_common
1170         $(call Device/zte_mf28x_common)
1171         DEVICE_PACKAGES += ipq-wifi-zte_mf287plus
1172         SOC := qcom-ipq4018
1173 #       The recovery image is used to return back to stock (an initramfs-based image
1174 #       that can be flashed to the device via sysupgrade
1175 #       The factory image is used to install from the stock firmware by using an
1176 #       exploit for the web interface
1177         IMAGES += factory.bin recovery.bin
1178         IMAGE/factory.bin  := append-ubi
1179         IMAGE/recovery.bin := append-squashfs4-fakeroot | sysupgrade-tar kernel=$$$$(BIN_DIR)/$$(KERNEL_INITRAMFS_IMAGE) rootfs=$$$$@ | append-metadata
1180 endef
1181
1182 define Device/zte_mf287plus
1183         $(call Device/zte_mf287_common)
1184         DEVICE_DTS_CONFIG := config@ap.dk01.1-c2
1185         DEVICE_MODEL := MF287Plus
1186         DEVICE_ALT0_VENDOR := ZTE
1187         DEVICE_ALT0_MODEL := MF287
1188 endef
1189 TARGET_DEVICES += zte_mf287plus
1190
1191 define Device/zte_mf287pro
1192         $(call Device/zte_mf287_common)
1193         DEVICE_DTS_CONFIG := config@ap.dk04.1-c1
1194         DEVICE_MODEL := MF287Pro
1195 endef
1196 TARGET_DEVICES += zte_mf287pro
1197
1198 define Device/zte_mf289f
1199         $(call Device/zte_mf28x_common)
1200         DEVICE_MODEL := MF289F
1201         DEVICE_PACKAGES += ipq-wifi-zte_mf289f ath10k-firmware-qca9984-ct
1202 endef
1203 TARGET_DEVICES += zte_mf289f
1204
1205 define Device/zyxel_nbg6617
1206         $(call Device/FitImageLzma)
1207         DEVICE_VENDOR := ZyXEL
1208         DEVICE_MODEL := NBG6617
1209         SOC := qcom-ipq4018
1210         KERNEL_SIZE := 4096k
1211         ROOTFS_SIZE := 24960k
1212         RAS_BOARD := NBG6617
1213         RAS_ROOTFS_SIZE := 19840k
1214         RAS_VERSION := "$(VERSION_DIST) $(REVISION)"
1215         IMAGE/sysupgrade.bin := append-kernel | append-rootfs | pad-rootfs | append-metadata
1216         IMAGES += factory.bin
1217 #       The ZyXEL firmware allows flashing thru the web-gui only when the rootfs is
1218 #       at least as large as the one of the initial firmware image (not the current
1219 #       one on the device). This only applies to the Web-UI, the bootlaoder ignores
1220 #       this minimum-size. However, the larger image can be flashed both ways.
1221         IMAGE/factory.bin := append-rootfs | pad-rootfs | pad-to 64k | check-size $$$$(ROOTFS_SIZE) | zyxel-ras-image separate-kernel
1222         IMAGE/sysupgrade.bin/squashfs := append-rootfs | pad-rootfs | check-size $$$$(ROOTFS_SIZE) | sysupgrade-tar rootfs=$$$$@ | append-metadata
1223         DEVICE_PACKAGES := kmod-usb-ledtrig-usbport
1224 endef
1225 TARGET_DEVICES += zyxel_nbg6617
1226
1227 define Device/zyxel_wre6606
1228         $(call Device/FitImage)
1229         DEVICE_VENDOR := ZyXEL
1230         DEVICE_MODEL := WRE6606
1231         DEVICE_DTS_CONFIG := config@4
1232         SOC := qcom-ipq4018
1233         IMAGE_SIZE := 13184k
1234         IMAGE/sysupgrade.bin := append-kernel | append-rootfs | pad-rootfs | check-size | append-metadata
1235         DEVICE_PACKAGES := -kmod-ath10k-ct kmod-ath10k-ct-smallbuffers
1236 endef
1237 # Missing DSA Setup
1238 #TARGET_DEVICES += zyxel_wre6606