target/linux/ipq40xx/image/generic.mk

   1
   2 DEVICE_VARS += NETGEAR_BOARD_ID NETGEAR_HW_ID
   3 DEVICE_VARS += RAS_BOARD RAS_ROOTFS_SIZE RAS_VERSION
   4 DEVICE_VARS += WRGG_DEVNAME WRGG_SIGNATURE
   5
   6 define Device/FitImage
   7         KERNEL_SUFFIX := -fit-uImage.itb
   8         KERNEL = kernel-bin | gzip | fit gzip $$(KDIR)/image-$$(DEVICE_DTS).dtb
   9         KERNEL_NAME := Image
  10 endef
  11
  12 define Device/FitImageLzma
  13         KERNEL_SUFFIX := -fit-uImage.itb
  14         KERNEL = kernel-bin | lzma | fit lzma $$(KDIR)/image-$$(DEVICE_DTS).dtb
  15         KERNEL_NAME := Image
  16 endef
  17
  18 define Device/FitzImage
  19         KERNEL_SUFFIX := -fit-zImage.itb
  20         KERNEL = kernel-bin | fit none $$(KDIR)/image-$$(DEVICE_DTS).dtb
  21         KERNEL_NAME := zImage
  22 endef
  23
  24 define Device/UbiFit
  25         KERNEL_IN_UBI := 1
  26         IMAGES := nand-factory.ubi nand-sysupgrade.bin
  27         IMAGE/nand-factory.ubi := append-ubi
  28         IMAGE/nand-sysupgrade.bin := sysupgrade-tar | append-metadata
  29 endef
  30
  31 define Device/DniImage
  32         $(call Device/FitzImage)
  33         NETGEAR_BOARD_ID :=
  34         NETGEAR_HW_ID :=
  35         IMAGES += factory.img
  36         IMAGE/factory.img := append-kernel | pad-offset 64k 64 | append-uImage-fakehdr filesystem | append-rootfs | pad-rootfs | netgear-dni
  37         IMAGE/sysupgrade.bin := append-kernel | pad-offset 64k 64 | append-uImage-fakehdr filesystem | \
  38                 append-rootfs | pad-rootfs | check-size | append-metadata
  39 endef
  40
  41 define Build/append-rootfshdr
  42         mkimage -A $(LINUX_KARCH) \
  43                 -O linux -T filesystem \
  44                 -C lzma -a $(KERNEL_LOADADDR) -e $(if $(KERNEL_ENTRY),$(KERNEL_ENTRY),$(KERNEL_LOADADDR)) \
  45                 -n root.squashfs -d $(IMAGE_ROOTFS) $@.new
  46         cat $(IMAGE_KERNEL) > $@.$1
  47         dd if=$@.new bs=64 count=1 >> $@.$1
  48 endef
  49
  50 define Build/append-rutx-metadata
  51         echo \
  52                 '{ \
  53                         "device_code": [".*"], \
  54                         "hwver": [".*"], \
  55                         "batch": [".*"], \
  56                         "serial": [".*"], \
  57                         "supported_devices":["teltonika,rutx"] \
  58                 }' | fwtool -I - $@
  59 endef
  60
  61 define Build/copy-file
  62         cat "$(1)" > "$@"
  63 endef
  64
  65 define Build/mkmylofw_32m
  66         $(eval device_id=$(word 1,$(1)))
  67         $(eval revision=$(word 2,$(1)))
  68
  69         let \
  70                 size="$$(stat -c%s $@)" \
  71                 pad="$(subst k,* 1024,$(BLOCKSIZE))" \
  72                 pad="(pad - (size % pad)) % pad" \
  73                 newsize='size + pad'; \
  74                 $(STAGING_DIR_HOST)/bin/mkmylofw \
  75                 -B WPE72 -i 0x11f6:$(device_id):0x11f6:$(device_id) -r $(revision) \
  76                 -s 0x2000000 -p0x180000:$$newsize:al:0x80208000:"OpenWrt":$@ \
  77                 $@.new
  78         @mv $@.new $@
  79 endef
  80
  81 define Build/wac5xx-netgear-tar
  82         mkdir $@.tmp
  83         mv $@ $@.tmp/wac5xx-ubifs-root.img
  84         md5sum $@.tmp/wac5xx-ubifs-root.img > $@.tmp/wac5xx-ubifs-root.md5sum
  85         echo "WAC505 WAC510" > $@.tmp/metadata.txt
  86         echo "WAC505_V9.9.9.9" > $@.tmp/version
  87         tar -C $@.tmp/ -cf $@ .
  88         rm -rf $@.tmp
  89 endef
  90
  91 define Build/qsdk-ipq-factory-nand-askey
  92         $(TOPDIR)/scripts/mkits-qsdk-ipq-image.sh $@.its\
  93                 askey_kernel $@.$1 \
  94                 askey_fs $(IMAGE_ROOTFS) \
  95                 ubifs $@
  96         PATH=$(LINUX_DIR)/scripts/dtc:$(PATH) mkimage -f $@.its $@.new
  97         @mv $@.new $@
  98 endef
  99
 100 define Build/qsdk-ipq-app-gpt
 101         cp $@ $@.tmp 2>/dev/null || true
 102         ptgen -g -o $@.tmp -a 1 -l 1024 \
 103                         -t 0x2e -N 0:HLOS -r -p 32M \
 104                         -t 0x83 -N rootfs -r -p 128M \
 105                                 -N rootfs_data -p 512M
 106         cat $@.tmp >> $@
 107         rm $@.tmp
 108 endef
 109
 110 define Build/SenaoFW
 111         -$(STAGING_DIR_HOST)/bin/mksenaofw \
 112                 -n $(BOARD_NAME) -r $(VENDOR_ID) -p $(1) \
 113                 -c $(DATECODE) -w $(2) -x $(CW_VER) -t 0 \
 114                 -e $@ \
 115                 -o $@.new
 116         @cp $@.new $@
 117 endef
 118
 119 define Build/wrgg-image
 120         mkwrggimg -i $@ \
 121         -o $@.new \
 122         -d "$(WRGG_DEVNAME)" \
 123         -s "$(WRGG_SIGNATURE)" \
 124         -v "" -m "" -B ""
 125         mv $@.new $@
 126 endef
 127
 128 define Device/8dev_habanero-dvk
 129         $(call Device/FitImageLzma)
 130         DEVICE_VENDOR := 8devices
 131         DEVICE_MODEL := Habanero DVK
 132         IMAGE_SIZE := 30976k
 133         SOC := qcom-ipq4019
 134         IMAGE/sysupgrade.bin := append-kernel | pad-to 64k | append-rootfs | pad-rootfs | check-size | append-metadata
 135 endef
 136 TARGET_DEVICES += 8dev_habanero-dvk
 137
 138 define Device/8dev_jalapeno-common
 139         $(call Device/FitImage)
 140         $(call Device/UbiFit)
 141         BLOCKSIZE := 128k
 142         PAGESIZE := 2048
 143         SOC := qcom-ipq4018
 144 endef
 145
 146 define Device/8dev_jalapeno
 147         $(call Device/8dev_jalapeno-common)
 148         DEVICE_VENDOR := 8devices
 149         DEVICE_MODEL := Jalapeno
 150 endef
 151 TARGET_DEVICES += 8dev_jalapeno
 152
 153 define Device/alfa-network_ap120c-ac
 154         $(call Device/FitImage)
 155         $(call Device/UbiFit)
 156         DEVICE_VENDOR := ALFA Network
 157         DEVICE_MODEL := AP120C-AC
 158         SOC := qcom-ipq4018
 159         DEVICE_PACKAGES := kmod-usb-acm kmod-tpm-i2c-atmel
 160         BLOCKSIZE := 128k
 161         PAGESIZE := 2048
 162         IMAGE_SIZE := 65536k
 163         IMAGES := nand-factory.bin nand-sysupgrade.bin
 164         IMAGE/nand-factory.bin := append-ubi | qsdk-ipq-factory-nand
 165 endef
 166 TARGET_DEVICES += alfa-network_ap120c-ac
 167
 168 define Device/aruba_glenmorangie
 169         $(call Device/FitImageLzma)
 170         DEVICE_VENDOR := Aruba
 171         SOC := qcom-ipq4029
 172 endef
 173
 174 define Device/aruba_ap-303
 175         $(call Device/aruba_glenmorangie)
 176         DEVICE_MODEL := AP-303
 177 endef
 178 TARGET_DEVICES += aruba_ap-303
 179
 180 define Device/aruba_ap-303h
 181         $(call Device/aruba_glenmorangie)
 182         DEVICE_MODEL := AP-303H
 183 endef
 184 # Missing DSA Setup
 185 #TARGET_DEVICES += aruba_ap-303h
 186
 187 define Device/aruba_ap-365
 188         $(call Device/aruba_glenmorangie)
 189         DEVICE_MODEL := AP-365
 190         DEVICE_PACKAGES := kmod-hwmon-ad7418 ipq-wifi-aruba_ap-365
 191 endef
 192 # Missing DSA Setup
 193 #TARGET_DEVICES += aruba_ap-365
 194
 195 define Device/asus_map-ac2200
 196         $(call Device/FitImageLzma)
 197         DEVICE_VENDOR := ASUS
 198         DEVICE_MODEL := Lyra (MAP-AC2200)
 199         SOC := qcom-ipq4019
 200         DEVICE_PACKAGES := ath10k-firmware-qca9888-ct kmod-ath3k
 201 endef
 202 TARGET_DEVICES += asus_map-ac2200
 203
 204 # WARNING: this is an initramfs image that gets you half of the way there
 205 #          you need to delete the jffs2 ubi volume and sysupgrade to the final image
 206 # to get a "trx" you can flash via web UI for ac42u/ac58u:
 207 # - change call Device/FitImageLzma to Device/FitImage
 208 # - add the following below UIMAGE_NAME
 209 #   UIMAGE_MAGIC := 0x27051956
 210 #   IMAGES += factory.trx
 211 #   IMAGE/factory.trx := copy-file $(KDIR)/tmp/$$(KERNEL_INITRAMFS_IMAGE) | uImage none
 212 define Device/asus_rt-ac42u
 213         $(call Device/FitImageLzma)
 214         DEVICE_VENDOR := ASUS
 215         DEVICE_MODEL := RT-AC42U
 216         DEVICE_ALT0_VENDOR := ASUS
 217         DEVICE_ALT0_MODEL := RT-ACRH17
 218         DEVICE_ALT1_VENDOR := ASUS
 219         DEVICE_ALT1_MODEL := RT-AC2200
 220         SOC := qcom-ipq4019
 221         BLOCKSIZE := 128k
 222         PAGESIZE := 2048
 223         IMAGE_SIZE := 20439364
 224         FILESYSTEMS := squashfs
 225 #       RT-AC82U is nowhere to be found online
 226 #       Rather, this device is a/k/a RT-AC42U
 227 #       But we'll go with what the vendor firmware has...
 228         UIMAGE_NAME:=$(shell echo -e '\03\01\01\01RT-AC82U')
 229         DEVICE_PACKAGES := ath10k-firmware-qca9984-ct kmod-usb-ledtrig-usbport
 230 endef
 231 TARGET_DEVICES += asus_rt-ac42u
 232
 233 define Device/asus_rt-ac58u
 234         $(call Device/FitImageLzma)
 235         DEVICE_VENDOR := ASUS
 236         DEVICE_MODEL := RT-AC58U
 237         DEVICE_ALT0_VENDOR := ASUS
 238         DEVICE_ALT0_MODEL := RT-ACRH13
 239         SOC := qcom-ipq4018
 240         BLOCKSIZE := 128k
 241         PAGESIZE := 2048
 242         IMAGE_SIZE := 20439364
 243         FILESYSTEMS := squashfs
 244 #       Someone - in their infinite wisdom - decided to put the firmware
 245 #       version in front of the image name \03\00\00\04 => Version 3.0.0.4
 246 #       Since u-boot works with strings we either need another fixup step
 247 #       to add a version... or we are very careful not to add '\0' into that
 248 #       string and call it a day.... Yeah, we do the latter!
 249         UIMAGE_NAME:=$(shell echo -e '\03\01\01\01RT-AC58U')
 250         DEVICE_PACKAGES := -kmod-ath10k-ct kmod-ath10k-ct-smallbuffers \
 251                 kmod-usb-ledtrig-usbport
 252 endef
 253 TARGET_DEVICES += asus_rt-ac58u
 254
 255 define Device/avm_fritzbox-4040
 256         $(call Device/FitImageLzma)
 257         DEVICE_VENDOR := AVM
 258         DEVICE_MODEL := FRITZ!Box 4040
 259         SOC := qcom-ipq4018
 260         BOARD_NAME := fritz4040
 261         IMAGE_SIZE := 29056k
 262         UBOOT_PATH := $(STAGING_DIR_IMAGE)/uboot-fritz4040.bin
 263         UBOOT_PARTITION_SIZE := 524288
 264         IMAGES += eva.bin
 265         IMAGE/eva.bin := append-uboot | pad-to $$$$(UBOOT_PARTITION_SIZE) | append-kernel | append-rootfs | pad-rootfs
 266         IMAGE/sysupgrade.bin := append-kernel | append-rootfs | pad-rootfs | check-size | append-metadata
 267         DEVICE_PACKAGES := fritz-tffs fritz-caldata
 268 endef
 269 TARGET_DEVICES += avm_fritzbox-4040
 270
 271 define Device/avm_fritzbox-7530
 272         $(call Device/FitImageLzma)
 273         DEVICE_VENDOR := AVM
 274         DEVICE_MODEL := FRITZ!Box 7530
 275         DEVICE_ALT0_VENDOR := AVM
 276         DEVICE_ALT0_MODEL := FRITZ!Box 7520
 277         SOC := qcom-ipq4019
 278         DEVICE_PACKAGES := fritz-caldata fritz-tffs-nand
 279 endef
 280 TARGET_DEVICES += avm_fritzbox-7530
 281
 282 define Device/avm_fritzrepeater-1200
 283         $(call Device/FitImageLzma)
 284         DEVICE_VENDOR := AVM
 285         DEVICE_MODEL := FRITZ!Repeater 1200
 286         SOC := qcom-ipq4019
 287         DEVICE_PACKAGES := fritz-caldata fritz-tffs-nand
 288 endef
 289 TARGET_DEVICES += avm_fritzrepeater-1200
 290
 291 define Device/avm_fritzrepeater-3000
 292         $(call Device/FitImageLzma)
 293         DEVICE_VENDOR := AVM
 294         DEVICE_MODEL := FRITZ!Repeater 3000
 295         SOC := qcom-ipq4019
 296         DEVICE_PACKAGES := ath10k-firmware-qca9984-ct fritz-caldata fritz-tffs-nand
 297 endef
 298 # Missing DSA Setup
 299 #TARGET_DEVICES += avm_fritzrepeater-3000
 300
 301 define Device/buffalo_wtr-m2133hp
 302         $(call Device/FitImage)
 303         $(call Device/UbiFit)
 304         DEVICE_VENDOR := Buffalo
 305         DEVICE_MODEL := WTR-M2133HP
 306         SOC := qcom-ipq4019
 307         DEVICE_PACKAGES := ath10k-firmware-qca9984-ct
 308         BLOCKSIZE := 128k
 309         PAGESIZE := 2048
 310 endef
 311 # Missing DSA Setup
 312 #TARGET_DEVICES += buffalo_wtr-m2133hp
 313
 314 define Device/cellc_rtl30vw
 315         KERNEL_SUFFIX := -fit-zImage.itb
 316         KERNEL_INITRAMFS = kernel-bin | gzip | fit gzip $$(KDIR)/image-$$(DEVICE_DTS).dtb
 317         KERNEL = kernel-bin | fit none $$(KDIR)/image-$$(DEVICE_DTS).dtb | uImage lzma | pad-to 2048
 318         KERNEL_NAME := zImage
 319         KERNEL_IN_UBI :=
 320         IMAGES := nand-factory.bin nand-sysupgrade.bin
 321         IMAGE/nand-factory.bin := append-rootfshdr kernel | append-ubi | qsdk-ipq-factory-nand-askey kernel
 322         IMAGE/nand-sysupgrade.bin := append-rootfshdr kernel | sysupgrade-tar kernel=$$$$@.kernel | append-metadata
 323         DEVICE_VENDOR := Cell C
 324         DEVICE_MODEL := RTL30VW
 325         SOC := qcom-ipq4019
 326         DEVICE_DTS_CONFIG := config@5
 327         KERNEL_INSTALL := 1
 328         KERNEL_SIZE := 4096k
 329         IMAGE_SIZE := 57344k
 330         BLOCKSIZE := 128k
 331         PAGESIZE := 2048
 332         DEVICE_PACKAGES := kmod-usb-net-qmi-wwan kmod-usb-serial-option uqmi
 333 endef
 334 TARGET_DEVICES += cellc_rtl30vw
 335
 336 define Device/cilab_meshpoint-one
 337         $(call Device/8dev_jalapeno-common)
 338         DEVICE_VENDOR := Crisis Innovation Lab
 339         DEVICE_MODEL := MeshPoint.One
 340         DEVICE_PACKAGES := kmod-i2c-gpio kmod-iio-bmp280-i2c kmod-hwmon-ina2xx kmod-rtc-pcf2127
 341 endef
 342 # Missing DSA Setup
 343 #TARGET_DEVICES += cilab_meshpoint-one
 344
 345 define Device/compex_wpj419
 346         $(call Device/FitImage)
 347         $(call Device/UbiFit)
 348         DEVICE_VENDOR := Compex
 349         DEVICE_MODEL := WPJ419
 350         SOC := qcom-ipq4019
 351         DEVICE_DTS_CONFIG := config@12
 352         KERNEL_INSTALL := 1
 353         BLOCKSIZE := 128k
 354         PAGESIZE := 2048
 355         FILESYSTEMS := squashfs
 356 endef
 357 # Missing DSA Setup
 358 #TARGET_DEVICES += compex_wpj419
 359
 360 define Device/compex_wpj428
 361         $(call Device/FitImage)
 362         DEVICE_VENDOR := Compex
 363         DEVICE_MODEL := WPJ428
 364         SOC := qcom-ipq4028
 365         DEVICE_DTS_CONFIG := config@4
 366         BLOCKSIZE := 64k
 367         IMAGE_SIZE := 31232k
 368         KERNEL_SIZE := 4096k
 369         IMAGES += cpximg-6a04.bin
 370         IMAGE/sysupgrade.bin := append-kernel | append-rootfs | pad-rootfs | append-metadata
 371         IMAGE/cpximg-6a04.bin := append-kernel | append-rootfs | pad-rootfs | mkmylofw_32m 0x8A2 3
 372         DEVICE_PACKAGES := kmod-gpio-beeper
 373         DEFAULT := n
 374 endef
 375 TARGET_DEVICES += compex_wpj428
 376
 377 define Device/devolo_magic-2-wifi-next
 378         $(call Device/FitImage)
 379         DEVICE_VENDOR := devolo
 380         DEVICE_MODEL := Magic 2 WiFi next
 381         SOC := qcom-ipq4018
 382         KERNEL_SIZE := 4096k
 383
 384         # If the bootloader sees 0xDEADC0DE and this trailer at the 64k boundary of a TFTP image
 385         # it will bootm it, just like we want for the initramfs.
 386         KERNEL_INITRAMFS := kernel-bin | gzip | fit gzip $$(KDIR)/image-$$(DEVICE_DTS).dtb | pad-to 64k |\
 387                 append-string -e '\xDE\xAD\xC0\xDE{"fl_initramfs":""}\x00'
 388
 389         IMAGE_SIZE := 26624k
 390         IMAGES := sysupgrade.bin
 391         IMAGE/sysupgrade.bin := append-kernel | append-rootfs | pad-rootfs | append-metadata
 392         DEVICE_PACKAGES := ipq-wifi-devolo_magic-2-wifi-next
 393         DEFAULT := n
 394 endef
 395 # Missing DSA Setup
 396 #TARGET_DEVICES += devolo_magic-2-wifi-next
 397
 398 define Device/dlink_dap-2610
 399         $(call Device/FitImageLzma)
 400         DEVICE_VENDOR := D-Link
 401         DEVICE_MODEL := DAP-2610
 402         SOC := qcom-ipq4018
 403         DEVICE_DTS_CONFIG := config@ap.dk01.1-c1
 404         BLOCKSIZE := 64k
 405         WRGG_DEVNAME := /dev/mtdblock/8
 406         WRGG_SIGNATURE := wapac30_dkbs_dap2610
 407         IMAGE_SIZE := 14080k
 408         IMAGES += factory.bin
 409         # Bootloader expects a special 160 byte header which is added by
 410         # wrgg-image.
 411         # Factory image size must be larger than 6MB, and size in wrgg header must
 412         # match actual factory image size to be flashable from D-Link http server.
 413         # Bootloader verifies checksum of wrgg image before booting, thus jffs2
 414         # cannot be part of the wrgg image. This is solved in the factory image by
 415         # having the rootfs at the end of the image (without pad-rootfs). And in
 416         # the sysupgrade image only the kernel is included in the wrgg checksum,
 417         # but this is not flashable from the D-link http server.
 418         # append-rootfs must start on an erase block boundary.
 419         IMAGE/factory.bin    := append-kernel | pad-offset 6144k 160 | append-rootfs | wrgg-image | check-size
 420         IMAGE/sysupgrade.bin := append-kernel | wrgg-image | pad-to $$$$(BLOCKSIZE) | append-rootfs | pad-rootfs | check-size | append-metadata
 421 endef
 422 # Missing DSA Setup
 423 #TARGET_DEVICES += dlink_dap-2610
 424
 425 define Device/edgecore_ecw5211
 426         $(call Device/FitImage)
 427         $(call Device/UbiFit)
 428         DEVICE_VENDOR := Edgecore
 429         DEVICE_MODEL := ECW5211
 430         SOC := qcom-ipq4018
 431         BLOCKSIZE := 128k
 432         PAGESIZE := 2048
 433         DEVICE_DTS_CONFIG := config@ap.dk01.1-c2
 434         DEVICE_PACKAGES := kmod-tpm-i2c-atmel kmod-usb-acm
 435 endef
 436 TARGET_DEVICES += edgecore_ecw5211
 437
 438 define Device/edgecore_oap100
 439         $(call Device/FitImage)
 440         $(call Device/UbiFit)
 441         DEVICE_VENDOR := Edgecore
 442         DEVICE_MODEL := OAP100
 443         SOC := qcom-ipq4019
 444         BLOCKSIZE := 128k
 445         PAGESIZE := 2048
 446         IMAGES := nand-sysupgrade.bin
 447         DEVICE_DTS_CONFIG := config@ap.dk07.1-c1
 448         DEVICE_PACKAGES := ipq-wifi-edgecore_oap100 kmod-usb-acm kmod-usb-net kmod-usb-net-cdc-qmi uqmi
 449 endef
 450 # Missing DSA Setup
 451 #TARGET_DEVICES += edgecore_oap100
 452
 453 define Device/engenius_eap1300
 454         $(call Device/FitImage)
 455         DEVICE_VENDOR := EnGenius
 456         DEVICE_MODEL := EAP1300
 457         DEVICE_DTS_CONFIG := config@4
 458         BOARD_NAME := eap1300
 459         SOC := qcom-ipq4018
 460         KERNEL_SIZE := 5120k
 461         IMAGE_SIZE := 25344k
 462         IMAGE/sysupgrade.bin := append-kernel | append-rootfs | pad-rootfs | append-metadata
 463 endef
 464 # Missing DSA Setup
 465 #TARGET_DEVICES += engenius_eap1300
 466
 467 define Device/engenius_eap2200
 468         $(call Device/FitImage)
 469         $(call Device/UbiFit)
 470         DEVICE_VENDOR := EnGenius
 471         DEVICE_MODEL := EAP2200
 472         SOC := qcom-ipq4019
 473         BLOCKSIZE := 128k
 474         PAGESIZE := 2048
 475         DEVICE_PACKAGES := ath10k-firmware-qca9888-ct -kmod-ath10k-ct kmod-ath10k-ct-smallbuffers
 476 endef
 477 # Missing DSA Setup
 478 #TARGET_DEVICES += engenius_eap2200
 479
 480 define Device/engenius_emd1
 481         $(call Device/FitImage)
 482         DEVICE_VENDOR := EnGenius
 483         DEVICE_MODEL := EMD1
 484         DEVICE_DTS_CONFIG := config@4
 485         SOC := qcom-ipq4018
 486         IMAGE_SIZE := 30720k
 487         IMAGES += factory.bin
 488         IMAGE/sysupgrade.bin := append-kernel | append-rootfs | pad-rootfs | append-metadata
 489         IMAGE/factory.bin := qsdk-ipq-factory-nor | check-size
 490 endef
 491 # Missing DSA Setup
 492 #TARGET_DEVICES += engenius_emd1
 493
 494 define Device/engenius_emr3500
 495         $(call Device/FitImage)
 496         DEVICE_VENDOR := EnGenius
 497         DEVICE_MODEL := EMR3500
 498         DEVICE_DTS_CONFIG := config@4
 499         SOC := qcom-ipq4018
 500         KERNEL_SIZE := 4096k
 501         IMAGE_SIZE := 30720k
 502         IMAGES += factory.bin
 503         IMAGE/sysupgrade.bin := append-kernel | append-rootfs | pad-rootfs | append-metadata
 504         IMAGE/factory.bin := qsdk-ipq-factory-nor | check-size
 505         DEFAULT := n
 506 endef
 507 # Missing DSA Setup
 508 #TARGET_DEVICES += engenius_emr3500
 509
 510 define Device/engenius_ens620ext
 511         $(call Device/FitImage)
 512         DEVICE_VENDOR := EnGenius
 513         DEVICE_MODEL := ENS620EXT
 514         SOC := qcom-ipq4018
 515         DEVICE_DTS_CONFIG := config@4
 516         BLOCKSIZE := 64k
 517         PAGESIZE := 256
 518         BOARD_NAME := ENS620EXT
 519         VENDOR_ID := 0x0101
 520         PRODUCT_ID := 0x79
 521         PRODUCT_ID_NEW := 0xA4
 522         DATECODE := 190507
 523         FW_VER := 3.1.2
 524         FW_VER_NEW := 3.5.6
 525         CW_VER := 1.8.99
 526         IMAGE_SIZE := 21312k
 527         KERNEL_SIZE := 5120k
 528         FILESYSTEMS := squashfs
 529         IMAGES += factory_30.bin factory_35.bin
 530         IMAGE/sysupgrade.bin := append-kernel | append-rootfs | pad-rootfs | check-size | append-metadata
 531         IMAGE/factory_30.bin := append-kernel | pad-to $$$$(KERNEL_SIZE) | append-rootfs | pad-rootfs | check-size | SenaoFW $$$$(PRODUCT_ID) $$$$(FW_VER)
 532         IMAGE/factory_35.bin := qsdk-ipq-factory-nor | check-size | SenaoFW $$$$(PRODUCT_ID_NEW) $$$$(FW_VER_NEW)
 533 endef
 534 # Missing DSA Setup
 535 #TARGET_DEVICES += engenius_ens620ext
 536
 537 define Device/extreme-networks_ws-ap3915i
 538         $(call Device/FitImage)
 539         DEVICE_VENDOR := Extreme Networks
 540         DEVICE_MODEL := WS-AP3915i
 541         IMAGE_SIZE := 30080k
 542         SOC := qcom-ipq4029
 543         BLOCKSIZE := 128k
 544         IMAGE/sysupgrade.bin := append-kernel | append-rootfs | pad-rootfs | check-size | append-metadata
 545         DEVICE_PACKAGES := ipq-wifi-extreme-networks_ws-ap3915i
 546 endef
 547 # Missing DSA Setup
 548 #TARGET_DEVICES += extreme-networks_ws-ap3915i
 549
 550 define Device/ezviz_cs-w3-wd1200g-eup
 551         $(call Device/FitImage)
 552         DEVICE_VENDOR := EZVIZ
 553         DEVICE_MODEL := CS-W3-WD1200G
 554         DEVICE_VARIANT := EUP
 555         IMAGE_SIZE := 14848k
 556         KERNEL_SIZE = 6m
 557         SOC := qcom-ipq4018
 558         IMAGE/sysupgrade.bin := append-kernel | append-rootfs | pad-rootfs | \
 559                 append-metadata
 560         DEVICE_PACKAGES := -kmod-ath10k-ct kmod-ath10k-ct-smallbuffers
 561         DEVICE_COMPAT_VERSION := 2.0
 562         DEVICE_COMPAT_MESSAGE := uboot's bootcmd has to be updated (see wiki). \
 563                 Upgrade via sysupgrade mechanism is not possible.
 564 endef
 565 # Missing DSA Setup
 566 #TARGET_DEVICES += ezviz_cs-w3-wd1200g-eup
 567
 568 define Device/glinet_gl-ap1300
 569         $(call Device/FitImage)
 570         $(call Device/UbiFit)
 571         DEVICE_VENDOR := GL.iNet
 572         DEVICE_MODEL := GL-AP1300
 573         SOC := qcom-ipq4018
 574         DEVICE_DTS_CONFIG := config@ap.dk01.1-c2
 575         BLOCKSIZE := 128k
 576         PAGESIZE := 2048
 577         IMAGE_SIZE := 131072k
 578         KERNEL_INSTALL := 1
 579         DEVICE_PACKAGES := ipq-wifi-glinet_gl-ap1300 kmod-usb-net-qmi-wwan kmod-usb-serial-option uqmi
 580 endef
 581 # Missing DSA Setup
 582 #TARGET_DEVICES += glinet_gl-ap1300
 583
 584 define Device/glinet_gl-b1300
 585         $(call Device/FitzImage)
 586         DEVICE_VENDOR := GL.iNet
 587         DEVICE_MODEL := GL-B1300
 588         BOARD_NAME := gl-b1300
 589         SOC := qcom-ipq4029
 590         KERNEL_SIZE := 4096k
 591         IMAGE_SIZE := 26624k
 592         IMAGE/sysupgrade.bin := append-kernel |append-rootfs | pad-rootfs | append-metadata
 593 endef
 594 TARGET_DEVICES += glinet_gl-b1300
 595
 596 define Device/glinet_gl-b2200
 597         $(call Device/FitzImage)
 598         DEVICE_VENDOR := GL.iNet
 599         DEVICE_MODEL := GL-B2200
 600         SOC := qcom-ipq4019
 601         DEVICE_DTS_CONFIG := config@ap.dk04.1-c3
 602         KERNEL_INITRAMFS_SUFFIX := -recovery.itb
 603         IMAGES := emmc.img.gz sysupgrade.bin
 604         IMAGE/emmc.img.gz := qsdk-ipq-app-gpt |\
 605                 pad-to 1024k | append-kernel |\
 606                 pad-to 33792k | append-rootfs |\
 607                 append-metadata | gzip
 608         IMAGE/sysupgrade.bin := sysupgrade-tar | append-metadata
 609         DEVICE_PACKAGES := ath10k-firmware-qca9888-ct \
 610                 kmod-fs-ext4 kmod-mmc kmod-spi-dev mkf2fs e2fsprogs kmod-fs-f2fs
 611 endef
 612 TARGET_DEVICES += glinet_gl-b2200
 613
 614 define Device/glinet_gl-s1300
 615         $(call Device/FitzImage)
 616         DEVICE_VENDOR := GL.iNet
 617         DEVICE_MODEL := GL-S1300
 618         SOC := qcom-ipq4029
 619         KERNEL_SIZE := 4096k
 620         IMAGE_SIZE := 26624k
 621         IMAGES := sysupgrade.bin
 622         IMAGE/sysupgrade.bin := append-kernel | append-rootfs | pad-rootfs | append-metadata
 623         DEVICE_PACKAGES := ipq-wifi-glinet_gl-s1300 kmod-fs-ext4 kmod-mmc kmod-spi-dev
 624 endef
 625 # Missing DSA Setup
 626 #TARGET_DEVICES += glinet_gl-s1300
 627
 628 define Device/linksys_ea6350v3
 629         # The Linksys EA6350v3 has a uboot bootloader that does not
 630         # support either booting lzma kernel images nor booting UBI
 631         # partitions. This uboot, however, supports raw kernel images and
 632         # gzipped images.
 633         #
 634         # As for the time of writing this, the device will boot the kernel
 635         # from a fixed address with a fixed length of 3MiB. Also, the
 636         # device has a hard-coded kernel command line that requieres the
 637         # rootfs and alt_rootfs to be in mtd11 and mtd13 respectively.
 638         # Oh... and the kernel partition overlaps with the rootfs
 639         # partition (the same for alt_kernel and alt_rootfs).
 640         #
 641         # If you are planing re-partitioning the device, you may want to
 642         # keep those details in mind:
 643         # 1. The kernel adresses you should honor are 0x00000000 and
 644         #    0x02800000 respectively.
 645         # 2. The kernel size (plus the dtb) cannot exceed 3.00MiB in size.
 646         # 3. You can use 'zImage', but not a raw 'Image' packed with lzma.
 647         # 4. The kernel command line from uboot is harcoded to boot with
 648         #    rootfs either in mtd11 or mtd13.
 649         $(call Device/FitzImage)
 650         DEVICE_VENDOR := Linksys
 651         DEVICE_MODEL := EA6350
 652         DEVICE_VARIANT := v3
 653         SOC := qcom-ipq4018
 654         BLOCKSIZE := 128k
 655         PAGESIZE := 2048
 656         KERNEL_SIZE := 3072k
 657         IMAGE_SIZE := 37888k
 658         UBINIZE_OPTS := -E 5
 659         IMAGES += factory.bin
 660         IMAGE/factory.bin := append-kernel | append-uImage-fakehdr filesystem | pad-to $$$$(KERNEL_SIZE) | append-ubi | linksys-image type=EA6350v3
 661         DEFAULT := n
 662 endef
 663 TARGET_DEVICES += linksys_ea6350v3
 664
 665 define Device/linksys_ea8300
 666         $(call Device/FitzImage)
 667         DEVICE_VENDOR := Linksys
 668         DEVICE_MODEL := EA8300
 669         SOC := qcom-ipq4019
 670         KERNEL_SIZE := 3072k
 671         IMAGE_SIZE := 87040k
 672         BLOCKSIZE := 128k
 673         PAGESIZE := 2048
 674         UBINIZE_OPTS := -E 5    # EOD marks to "hide" factory sig at EOF
 675         IMAGES += factory.bin
 676         IMAGE/factory.bin  := append-kernel | pad-to $$$$(KERNEL_SIZE) | append-ubi | linksys-image type=EA8300
 677         DEVICE_PACKAGES := ath10k-firmware-qca9888-ct ipq-wifi-linksys_ea8300 kmod-usb-ledtrig-usbport
 678         DEFAULT := n
 679 endef
 680 TARGET_DEVICES += linksys_ea8300
 681
 682 define Device/linksys_mr8300
 683         $(call Device/FitzImage)
 684         DEVICE_VENDOR := Linksys
 685         DEVICE_MODEL := MR8300
 686         SOC := qcom-ipq4019
 687         KERNEL_SIZE := 3072k
 688         IMAGE_SIZE := 87040k
 689         BLOCKSIZE := 128k
 690         PAGESIZE := 2048
 691         UBINIZE_OPTS := -E 5    # EOD marks to "hide" factory sig at EOF
 692         IMAGES += factory.bin
 693         IMAGE/factory.bin  := append-kernel | pad-to $$$$(KERNEL_SIZE) | append-ubi | linksys-image type=MR8300
 694         DEVICE_PACKAGES := ath10k-firmware-qca9888-ct kmod-usb-ledtrig-usbport
 695         DEFAULT := n
 696 endef
 697 TARGET_DEVICES += linksys_mr8300
 698
 699 define Device/linksys_whw01-v1
 700         $(call Device/FitzImage)
 701         DEVICE_VENDOR := Linksys
 702         DEVICE_MODEL := WHW01
 703         DEVICE_VARIANT := v1
 704         KERNEL_SIZE := 6144k
 705         IMAGE_SIZE := 28704512  # 28032k minus linksys signature (256-bytes).
 706         SOC := qcom-ipq4018
 707         BLOCKSIZE := 128k
 708         PAGESIZE := 2048
 709         UBINIZE_OPTS := -E 5    # EOD marks to "hide" factory sig at EOF
 710         IMAGES += factory.bin
 711         IMAGE/factory.bin := append-kernel | pad-to $$$$(KERNEL_SIZE) | \
 712                 append-ubi | linksys-image type=WHW01 | pad-to $$$$(PAGESIZE) | \
 713                 check-size
 714         DEVICE_PACKAGES := uboot-envtools kmod-leds-pca963x
 715 endef
 716 # Missing DSA Setup
 717 #TARGET_DEVICES += linksys_whw01-v1
 718
 719 define Device/luma_wrtq-329acn
 720         $(call Device/FitImage)
 721         DEVICE_VENDOR := Luma Home
 722         DEVICE_MODEL := WRTQ-329ACN
 723         SOC := qcom-ipq4018
 724         DEVICE_PACKAGES := kmod-ath3k kmod-eeprom-at24 kmod-i2c-gpio
 725         IMAGE_SIZE := 76632k
 726         BLOCKSIZE := 128k
 727         PAGESIZE := 2048
 728 endef
 729 TARGET_DEVICES += luma_wrtq-329acn
 730
 731 define Device/meraki_mr33
 732         $(call Device/FitImage)
 733         DEVICE_VENDOR := Cisco Meraki
 734         DEVICE_MODEL := MR33
 735         SOC := qcom-ipq4029
 736         BLOCKSIZE := 128k
 737         PAGESIZE := 2048
 738         DEVICE_PACKAGES := -swconfig ath10k-firmware-qca9887-ct
 739 endef
 740 TARGET_DEVICES += meraki_mr33
 741
 742 define Device/meraki_mr74
 743         $(call Device/FitImage)
 744         DEVICE_VENDOR := Cisco Meraki
 745         DEVICE_MODEL := MR74
 746         SOC := qcom-ipq4029
 747         BLOCKSIZE := 128k
 748         PAGESIZE := 2048
 749         DEVICE_PACKAGES := -swconfig ath10k-firmware-qca9887-ct
 750         DEVICE_DTS_CONFIG := config@3
 751 endef
 752 TARGET_DEVICES += meraki_mr74
 753
 754 define Device/mobipromo_cm520-79f
 755         $(call Device/FitzImage)
 756         $(call Device/UbiFit)
 757         DEVICE_VENDOR := MobiPromo
 758         DEVICE_MODEL := CM520-79F
 759         SOC := qcom-ipq4019
 760         BLOCKSIZE := 128k
 761         PAGESIZE := 2048
 762         DEVICE_PACKAGES := kmod-usb-ledtrig-usbport
 763 endef
 764 TARGET_DEVICES += mobipromo_cm520-79f
 765
 766 define Device/netgear_ex61x0v2
 767         $(call Device/DniImage)
 768         DEVICE_VENDOR := NETGEAR
 769         DEVICE_DTS_CONFIG := config@4
 770         NETGEAR_BOARD_ID := EX6150v2series
 771         NETGEAR_HW_ID := 29765285+16+0+128+2x2
 772         IMAGE_SIZE := 14400k
 773         SOC := qcom-ipq4018
 774 endef
 775
 776 define Device/netgear_ex6100v2
 777         $(call Device/netgear_ex61x0v2)
 778         DEVICE_MODEL := EX6100
 779         DEVICE_VARIANT := v2
 780 endef
 781 # Missing DSA Setup
 782 #TARGET_DEVICES += netgear_ex6100v2
 783
 784 define Device/netgear_ex6150v2
 785         $(call Device/netgear_ex61x0v2)
 786         DEVICE_MODEL := EX6150
 787         DEVICE_VARIANT := v2
 788 endef
 789 # Missing DSA Setup
 790 #TARGET_DEVICES += netgear_ex6150v2
 791
 792 define Device/netgear_orbi
 793         $(call Device/DniImage)
 794         SOC := qcom-ipq4019
 795         DEVICE_VENDOR := NETGEAR
 796         IMAGE/factory.img := append-kernel | pad-offset 128k 64 | \
 797                 append-uImage-fakehdr filesystem | pad-to $$$$(KERNEL_SIZE) | \
 798                 append-rootfs | pad-rootfs | netgear-dni
 799         IMAGE/sysupgrade.bin/squashfs := append-rootfs | pad-to 64k | \
 800                 sysupgrade-tar rootfs=$$$$@ | append-metadata
 801         DEVICE_PACKAGES := ath10k-firmware-qca9984-ct e2fsprogs kmod-fs-ext4 losetup
 802 endef
 803
 804 define Device/netgear_rbx50
 805         $(call Device/netgear_orbi)
 806         NETGEAR_HW_ID := 29765352+0+4000+512+2x2+2x2+4x4
 807         KERNEL_SIZE := 3932160
 808         ROOTFS_SIZE := 32243712
 809         IMAGE_SIZE := 36175872
 810 endef
 811
 812 define Device/netgear_rbr50
 813         $(call Device/netgear_rbx50)
 814         DEVICE_MODEL := RBR50
 815         DEVICE_VARIANT := v1
 816         NETGEAR_BOARD_ID := RBR50
 817 endef
 818 TARGET_DEVICES += netgear_rbr50
 819
 820 define Device/netgear_rbs50
 821         $(call Device/netgear_rbx50)
 822         DEVICE_MODEL := RBS50
 823         DEVICE_VARIANT := v1
 824         NETGEAR_BOARD_ID := RBS50
 825 endef
 826 TARGET_DEVICES += netgear_rbs50
 827
 828 define Device/netgear_srx60
 829         $(call Device/netgear_orbi)
 830         NETGEAR_HW_ID := 29765352+0+4096+512+2x2+2x2+4x4
 831         KERNEL_SIZE := 3932160
 832         ROOTFS_SIZE := 32243712
 833         IMAGE_SIZE := 36175872
 834 endef
 835
 836 define Device/netgear_srr60
 837         $(call Device/netgear_srx60)
 838         DEVICE_MODEL := SRR60
 839         NETGEAR_BOARD_ID := SRR60
 840 endef
 841 TARGET_DEVICES += netgear_srr60
 842
 843 define Device/netgear_srs60
 844         $(call Device/netgear_srx60)
 845         DEVICE_MODEL := SRS60
 846         NETGEAR_BOARD_ID := SRS60
 847 endef
 848 TARGET_DEVICES += netgear_srs60
 849
 850 define Device/netgear_wac510
 851         $(call Device/FitImage)
 852         $(call Device/UbiFit)
 853         DEVICE_VENDOR := Netgear
 854         DEVICE_MODEL := WAC510
 855         SOC := qcom-ipq4018
 856         DEVICE_DTS_CONFIG := config@5
 857         BLOCKSIZE := 128k
 858         PAGESIZE := 2048
 859         IMAGES += nand-factory.tar
 860         IMAGE/nand-factory.tar := append-ubi | wac5xx-netgear-tar
 861         DEVICE_PACKAGES := uboot-envtools
 862 endef
 863 TARGET_DEVICES += netgear_wac510
 864
 865 define Device/openmesh_a42
 866         $(call Device/FitImageLzma)
 867         DEVICE_VENDOR := OpenMesh
 868         DEVICE_MODEL := A42
 869         SOC := qcom-ipq4018
 870         DEVICE_DTS_CONFIG := config@om.a42
 871         BLOCKSIZE := 64k
 872         KERNEL = kernel-bin | lzma | fit lzma $$(KDIR)/image-$$(DEVICE_DTS).dtb | pad-to $$(BLOCKSIZE)
 873         IMAGE_SIZE := 15616k
 874         IMAGES += factory.bin
 875         IMAGE/factory.bin := append-rootfs | pad-rootfs | openmesh-image ce_type=A42
 876         IMAGE/sysupgrade.bin/squashfs := append-rootfs | pad-rootfs | sysupgrade-tar rootfs=$$$$@ | append-metadata
 877 endef
 878 # Missing DSA Setup
 879 #TARGET_DEVICES += openmesh_a42
 880
 881 define Device/openmesh_a62
 882         $(call Device/FitImageLzma)
 883         DEVICE_VENDOR := OpenMesh
 884         DEVICE_MODEL := A62
 885         SOC := qcom-ipq4019
 886         DEVICE_DTS_CONFIG := config@om.a62
 887         BLOCKSIZE := 64k
 888         KERNEL = kernel-bin | lzma | fit lzma $$(KDIR)/image-$$(DEVICE_DTS).dtb | pad-to $$(BLOCKSIZE)
 889         IMAGE_SIZE := 15552k
 890         IMAGES += factory.bin
 891         IMAGE/factory.bin := append-rootfs | pad-rootfs | openmesh-image ce_type=A62
 892         IMAGE/sysupgrade.bin/squashfs := append-rootfs | pad-rootfs | sysupgrade-tar rootfs=$$$$@ | append-metadata
 893         DEVICE_PACKAGES := ath10k-firmware-qca9888-ct
 894 endef
 895 # Missing DSA Setup
 896 #TARGET_DEVICES += openmesh_a62
 897
 898 define Device/p2w_r619ac
 899         $(call Device/FitzImage)
 900         $(call Device/UbiFit)
 901         DEVICE_VENDOR := P&W
 902         DEVICE_MODEL := R619AC
 903         SOC := qcom-ipq4019
 904         DEVICE_DTS_CONFIG := config@10
 905         BLOCKSIZE := 128k
 906         PAGESIZE := 2048
 907         DEVICE_PACKAGES := ipq-wifi-p2w_r619ac
 908 endef
 909
 910 define Device/p2w_r619ac-64m
 911         $(call Device/p2w_r619ac)
 912         DEVICE_VARIANT := 64M NAND
 913         IMAGES += nand-factory.bin
 914         IMAGE/nand-factory.bin := append-ubi | qsdk-ipq-factory-nand
 915 endef
 916 TARGET_DEVICES += p2w_r619ac-64m
 917
 918 define Device/p2w_r619ac-128m
 919         $(call Device/p2w_r619ac)
 920         DEVICE_VARIANT := 128M NAND
 921 endef
 922 TARGET_DEVICES += p2w_r619ac-128m
 923
 924 define Device/pakedge_wr-1
 925         $(call Device/FitImageLzma)
 926         DEVICE_VENDOR := Pakedge
 927         DEVICE_MODEL := WR-1
 928         DEVICE_DTS_CONFIG := config@ap.dk01.1-c1
 929         DEVICE_PACKAGES := ipq-wifi-pakedge_wr-1
 930         SOC := qcom-ipq4018
 931         BLOCKSIZE := 64k
 932         IMAGE_SIZE := 31232k
 933         IMAGE/sysupgrade.bin := append-kernel | pad-to $$$$(BLOCKSIZE) | append-rootfs | pad-rootfs | append-metadata
 934 endef
 935 TARGET_DEVICES += pakedge_wr-1
 936
 937 define Device/plasmacloud_pa1200
 938         $(call Device/FitImageLzma)
 939         DEVICE_VENDOR := Plasma Cloud
 940         DEVICE_MODEL := PA1200
 941         SOC := qcom-ipq4018
 942         DEVICE_DTS_CONFIG := config@pc.pa1200
 943         BLOCKSIZE := 64k
 944         KERNEL = kernel-bin | lzma | fit lzma $$(KDIR)/image-$$(DEVICE_DTS).dtb | pad-to $$(BLOCKSIZE)
 945         IMAGE_SIZE := 15616k
 946         IMAGES += factory.bin
 947         IMAGE/factory.bin := append-rootfs | pad-rootfs | openmesh-image ce_type=PA1200
 948         IMAGE/sysupgrade.bin/squashfs := append-rootfs | pad-rootfs | sysupgrade-tar rootfs=$$$$@ | append-metadata
 949 endef
 950 # Missing DSA Setup
 951 #TARGET_DEVICES += plasmacloud_pa1200
 952
 953 define Device/plasmacloud_pa2200
 954         $(call Device/FitImageLzma)
 955         DEVICE_VENDOR := Plasma Cloud
 956         DEVICE_MODEL := PA2200
 957         SOC := qcom-ipq4019
 958         DEVICE_DTS_CONFIG := config@pc.pa2200
 959         BLOCKSIZE := 64k
 960         KERNEL = kernel-bin | lzma | fit lzma $$(KDIR)/image-$$(DEVICE_DTS).dtb | pad-to $$(BLOCKSIZE)
 961         IMAGE_SIZE := 15552k
 962         IMAGES += factory.bin
 963         IMAGE/factory.bin := append-rootfs | pad-rootfs | openmesh-image ce_type=PA2200
 964         IMAGE/sysupgrade.bin/squashfs := append-rootfs | pad-rootfs | sysupgrade-tar rootfs=$$$$@ | append-metadata
 965         DEVICE_PACKAGES := ath10k-firmware-qca9888-ct
 966 endef
 967 # Missing DSA Setup
 968 #TARGET_DEVICES += plasmacloud_pa2200
 969
 970 define Device/qcom_ap-dk01.1-c1
 971         DEVICE_VENDOR := Qualcomm Atheros
 972         DEVICE_MODEL := AP-DK01.1
 973         DEVICE_VARIANT := C1
 974         BOARD_NAME := ap-dk01.1-c1
 975         SOC := qcom-ipq4019
 976         DEVICE_DTS := qcom-ipq4019-ap.dk01.1-c1
 977         KERNEL_INSTALL := 1
 978         KERNEL_SIZE := 4096k
 979         IMAGE_SIZE := 26624k
 980         $(call Device/FitImage)
 981         IMAGE/sysupgrade.bin := append-kernel | pad-to $$$$(KERNEL_SIZE) | append-rootfs | pad-rootfs | append-metadata
 982         DEFAULT := n
 983 endef
 984 TARGET_DEVICES += qcom_ap-dk01.1-c1
 985
 986 define Device/qcom_ap-dk04.1-c1
 987         $(call Device/FitImage)
 988         $(call Device/UbiFit)
 989         DEVICE_VENDOR := Qualcomm Atheros
 990         DEVICE_MODEL := AP-DK04.1
 991         DEVICE_VARIANT := C1
 992         SOC := qcom-ipq4019
 993         DEVICE_DTS := qcom-ipq4019-ap.dk04.1-c1
 994         KERNEL_INSTALL := 1
 995         KERNEL_SIZE := 4048k
 996         BLOCKSIZE := 128k
 997         PAGESIZE := 2048
 998         BOARD_NAME := ap-dk04.1-c1
 999         DEFAULT := n
1000 endef
1001 TARGET_DEVICES += qcom_ap-dk04.1-c1
1002
1003 define Device/qxwlan_e2600ac-c1
1004         $(call Device/FitImage)
1005         DEVICE_VENDOR := Qxwlan
1006         DEVICE_MODEL := E2600AC
1007         DEVICE_VARIANT := C1
1008         BOARD_NAME := e2600ac-c1
1009         SOC := qcom-ipq4019
1010         KERNEL_SIZE := 4096k
1011         IMAGE_SIZE := 31232k
1012         IMAGE/sysupgrade.bin := append-kernel | append-rootfs | pad-rootfs | append-metadata
1013         DEVICE_PACKAGES := ipq-wifi-qxwlan_e2600ac-c1
1014         DEFAULT := n
1015 endef
1016 # Missing DSA Setup
1017 #TARGET_DEVICES += qxwlan_e2600ac-c1
1018
1019 define Device/qxwlan_e2600ac-c2
1020         $(call Device/FitImage)
1021         $(call Device/UbiFit)
1022         DEVICE_VENDOR := Qxwlan
1023         DEVICE_MODEL := E2600AC
1024         DEVICE_VARIANT := C2
1025         SOC := qcom-ipq4019
1026         KERNEL_INSTALL := 1
1027         BLOCKSIZE := 128k
1028         PAGESIZE := 2048
1029         DEVICE_PACKAGES := ipq-wifi-qxwlan_e2600ac-c2
1030 endef
1031 # Missing DSA Setup
1032 #TARGET_DEVICES += qxwlan_e2600ac-c2
1033
1034 define Device/sony_ncp-hg100-cellular
1035         $(call Device/FitImage)
1036         DEVICE_VENDOR := Sony
1037         DEVICE_MODEL := NCP-HG100/Cellular
1038         DEVICE_DTS_CONFIG := config@ap.dk04.1-c4
1039         SOC := qcom-ipq4019
1040         KERNEL_SIZE := 8192k
1041         IMAGE_SIZE := 128m
1042         DEVICE_PACKAGES := e2fsprogs ipq-wifi-sony_ncp-hg100-cellular \
1043                 kmod-fs-ext4 uqmi
1044 endef
1045 TARGET_DEVICES += sony_ncp-hg100-cellular
1046
1047 define Device/teltonika_rutx10
1048         $(call Device/FitImage)
1049         $(call Device/UbiFit)
1050         DEVICE_VENDOR := Teltonika
1051         DEVICE_MODEL := RUTX10
1052         SOC := qcom-ipq4018
1053         DEVICE_DTS_CONFIG := config@5
1054         KERNEL_INSTALL := 1
1055         BLOCKSIZE := 128k
1056         PAGESIZE := 2048
1057         FILESYSTEMS := squashfs
1058         IMAGE/nand-factory.ubi := append-ubi | qsdk-ipq-factory-nand | append-rutx-metadata
1059         DEVICE_PACKAGES := ipq-wifi-teltonika_rutx kmod-bluetooth
1060 endef
1061 # Missing DSA Setup
1062 #TARGET_DEVICES += teltonika_rutx10
1063
1064 define Device/tel_x1pro
1065         $(call Device/FitImage)
1066         DEVICE_VENDOR := Telco
1067         DEVICE_MODEL := X1 Pro
1068         SOC := qcom-ipq4019
1069         KERNEL_SIZE := 4096k
1070         IMAGE_SIZE := 31232k
1071         IMAGE/sysupgrade.bin := append-kernel | append-rootfs | pad-rootfs | append-metadata
1072         DEVICE_PACKAGES := kmod-usb-net-qmi-wwan kmod-usb-serial-option uqmi
1073         DEFAULT := n
1074 endef
1075 # Missing DSA Setup
1076 #TARGET_DEVICES += tel_x1pro
1077
1078 define Device/unielec_u4019-32m
1079         $(call Device/FitImage)
1080         DEVICE_VENDOR := Unielec
1081         DEVICE_MODEL := U4019
1082         DEVICE_VARIANT := 32M
1083         BOARD_NAME := u4019-32m
1084         SOC := qcom-ipq4019
1085         KERNEL_SIZE := 4096k
1086         IMAGE_SIZE := 31232k
1087         IMAGE/sysupgrade.bin := append-kernel | append-rootfs | pad-rootfs | append-metadata
1088         DEFAULT := n
1089 endef
1090 # Missing DSA Setup
1091 #TARGET_DEVICES += unielec_u4019-32m
1092
1093 define Device/zte_mf28x_common
1094         $(call Device/FitzImage)
1095         DEVICE_VENDOR := ZTE
1096         SOC := qcom-ipq4019
1097         DEVICE_DTS_CONFIG := config@ap.dk04.1-c1
1098         BLOCKSIZE := 128k
1099         PAGESIZE := 2048
1100         KERNEL_IN_UBI := 1
1101         DEVICE_PACKAGES := kmod-usb-net-qmi-wwan kmod-usb-serial-option uqmi
1102 endef
1103
1104 define Device/zte_mf286d
1105         $(call Device/zte_mf28x_common)
1106         DEVICE_MODEL := MF286D
1107 endef
1108 TARGET_DEVICES += zte_mf286d
1109
1110 define Device/zte_mf289f
1111         $(call Device/zte_mf28x_common)
1112         DEVICE_MODEL := MF289F
1113         DEVICE_PACKAGES += ipq-wifi-zte_mf289f ath10k-firmware-qca9984-ct
1114 endef
1115 TARGET_DEVICES += zte_mf289f
1116
1117 define Device/zyxel_nbg6617
1118         $(call Device/FitImageLzma)
1119         DEVICE_VENDOR := ZyXEL
1120         DEVICE_MODEL := NBG6617
1121         SOC := qcom-ipq4018
1122         KERNEL_SIZE := 4096k
1123         ROOTFS_SIZE := 24960k
1124         RAS_BOARD := NBG6617
1125         RAS_ROOTFS_SIZE := 19840k
1126         RAS_VERSION := "$(VERSION_DIST) $(REVISION)"
1127         IMAGE/sysupgrade.bin := append-kernel | append-rootfs | pad-rootfs | append-metadata
1128         IMAGES += factory.bin
1129 #       The ZyXEL firmware allows flashing thru the web-gui only when the rootfs is
1130 #       at least as large as the one of the initial firmware image (not the current
1131 #       one on the device). This only applies to the Web-UI, the bootlaoder ignores
1132 #       this minimum-size. However, the larger image can be flashed both ways.
1133         IMAGE/factory.bin := append-rootfs | pad-rootfs | pad-to 64k | check-size $$$$(ROOTFS_SIZE) | zyxel-ras-image separate-kernel
1134         IMAGE/sysupgrade.bin/squashfs := append-rootfs | pad-rootfs | check-size $$$$(ROOTFS_SIZE) | sysupgrade-tar rootfs=$$$$@ | append-metadata
1135         DEVICE_PACKAGES := kmod-usb-ledtrig-usbport
1136 endef
1137 TARGET_DEVICES += zyxel_nbg6617
1138
1139 define Device/zyxel_wre6606
1140         $(call Device/FitImage)
1141         DEVICE_VENDOR := ZyXEL
1142         DEVICE_MODEL := WRE6606
1143         DEVICE_DTS_CONFIG := config@4
1144         SOC := qcom-ipq4018
1145         IMAGE_SIZE := 13184k
1146         IMAGE/sysupgrade.bin := append-kernel | append-rootfs | pad-rootfs | check-size | append-metadata
1147         DEVICE_PACKAGES := -kmod-ath10k-ct kmod-ath10k-ct-smallbuffers
1148 endef
1149 # Missing DSA Setup
1150 #TARGET_DEVICES += zyxel_wre6606