target/linux/ipq40xx/image/generic.mk

   1
   2 DEVICE_VARS += NETGEAR_BOARD_ID NETGEAR_HW_ID
   3 DEVICE_VARS += RAS_BOARD RAS_ROOTFS_SIZE RAS_VERSION
   4 DEVICE_VARS += WRGG_DEVNAME WRGG_SIGNATURE
   5
   6 define Device/FitImage
   7         KERNEL_SUFFIX := -uImage.itb
   8         KERNEL = kernel-bin | gzip | fit gzip $$(KDIR)/image-$$(DEVICE_DTS).dtb
   9         KERNEL_NAME := Image
  10 endef
  11
  12 define Device/FitImageLzma
  13         KERNEL_SUFFIX := -uImage.itb
  14         KERNEL = kernel-bin | lzma | fit lzma $$(KDIR)/image-$$(DEVICE_DTS).dtb
  15         KERNEL_NAME := Image
  16 endef
  17
  18 define Device/FitzImage
  19         KERNEL_SUFFIX := -zImage.itb
  20         KERNEL = kernel-bin | fit none $$(KDIR)/image-$$(DEVICE_DTS).dtb
  21         KERNEL_NAME := zImage
  22 endef
  23
  24 define Device/UbiFit
  25         KERNEL_IN_UBI := 1
  26         IMAGES := factory.ubi sysupgrade.bin
  27         IMAGE/factory.ubi := append-ubi
  28         IMAGE/sysupgrade.bin := sysupgrade-tar | append-metadata
  29 endef
  30
  31 define Device/DniImage
  32         $(call Device/FitzImage)
  33         NETGEAR_BOARD_ID :=
  34         NETGEAR_HW_ID :=
  35         IMAGES += factory.img
  36         IMAGE/factory.img := append-kernel | pad-offset 64k 64 | append-uImage-fakehdr filesystem | append-rootfs | pad-rootfs | netgear-dni
  37         IMAGE/sysupgrade.bin := append-kernel | pad-offset 64k 64 | append-uImage-fakehdr filesystem | \
  38                 append-rootfs | pad-rootfs | check-size | append-metadata
  39 endef
  40
  41 define Build/append-rootfshdr
  42         mkimage -A $(LINUX_KARCH) \
  43                 -O linux -T filesystem \
  44                 -C lzma -a $(KERNEL_LOADADDR) -e $(if $(KERNEL_ENTRY),$(KERNEL_ENTRY),$(KERNEL_LOADADDR)) \
  45                 -n root.squashfs -d $(IMAGE_ROOTFS) $@.new
  46         cat $(IMAGE_KERNEL) > $@.$1
  47         dd if=$@.new bs=64 count=1 >> $@.$1
  48 endef
  49
  50 define Build/append-rutx-metadata
  51         echo \
  52                 '{ \
  53                         "device_code": [".*"], \
  54                         "hwver": [".*"], \
  55                         "batch": [".*"], \
  56                         "serial": [".*"], \
  57                         "supported_devices":["teltonika,rutx"] \
  58                 }' | fwtool -I - $@
  59 endef
  60
  61 define Build/copy-file
  62         cat "$(1)" > "$@"
  63 endef
  64
  65 define Build/mkmylofw_32m
  66         $(eval device_id=$(word 1,$(1)))
  67         $(eval revision=$(word 2,$(1)))
  68
  69         let \
  70                 size="$$(stat -c%s $@)" \
  71                 pad="$(subst k,* 1024,$(BLOCKSIZE))" \
  72                 pad="(pad - (size % pad)) % pad" \
  73                 newsize='size + pad'; \
  74                 $(STAGING_DIR_HOST)/bin/mkmylofw \
  75                 -B WPE72 -i 0x11f6:$(device_id):0x11f6:$(device_id) -r $(revision) \
  76                 -s 0x2000000 -p0x180000:$$newsize:al:0x80208000:"OpenWrt":$@ \
  77                 $@.new
  78         @mv $@.new $@
  79 endef
  80
  81 define Build/wac5xx-netgear-tar
  82         mkdir $@.tmp
  83         mv $@ $@.tmp/wac5xx-ubifs-root.img
  84         md5sum $@.tmp/wac5xx-ubifs-root.img > $@.tmp/wac5xx-ubifs-root.md5sum
  85         echo "WAC505 WAC510" > $@.tmp/metadata.txt
  86         echo "WAC505_V9.9.9.9" > $@.tmp/version
  87         tar -C $@.tmp/ -cf $@ .
  88         rm -rf $@.tmp
  89 endef
  90
  91 define Build/qsdk-ipq-factory-nand-askey
  92         $(TOPDIR)/scripts/mkits-qsdk-ipq-image.sh $@.its\
  93                 askey_kernel $@.$1 \
  94                 askey_fs $(IMAGE_ROOTFS) \
  95                 ubifs $@
  96         PATH=$(LINUX_DIR)/scripts/dtc:$(PATH) mkimage -f $@.its $@.new
  97         @mv $@.new $@
  98 endef
  99
 100 define Build/qsdk-ipq-app-gpt
 101         cp $@ $@.tmp 2>/dev/null || true
 102         ptgen -g -o $@.tmp -a 1 -l 1024 \
 103                         -t 0x2e -N 0:HLOS -r -p 32M \
 104                         -t 0x83 -N rootfs -r -p 128M \
 105                                 -N rootfs_data -p 512M
 106         cat $@.tmp >> $@
 107         rm $@.tmp
 108 endef
 109
 110 define Build/SenaoFW
 111         -$(STAGING_DIR_HOST)/bin/mksenaofw \
 112                 -n $(BOARD_NAME) -r $(VENDOR_ID) -p $(1) \
 113                 -c $(DATECODE) -w $(2) -x $(CW_VER) -t 0 \
 114                 -e $@ \
 115                 -o $@.new
 116         @cp $@.new $@
 117 endef
 118
 119 define Build/wrgg-image
 120         mkwrggimg -i $@ \
 121         -o $@.new \
 122         -d "$(WRGG_DEVNAME)" \
 123         -s "$(WRGG_SIGNATURE)" \
 124         -v "" -m "" -B ""
 125         mv $@.new $@
 126 endef
 127
 128 define Device/8dev_habanero-dvk
 129         $(call Device/FitImageLzma)
 130         DEVICE_VENDOR := 8devices
 131         DEVICE_MODEL := Habanero DVK
 132         IMAGE_SIZE := 30976k
 133         SOC := qcom-ipq4019
 134         IMAGE/sysupgrade.bin := append-kernel | pad-to 64k | append-rootfs | pad-rootfs | check-size | append-metadata
 135 endef
 136 TARGET_DEVICES += 8dev_habanero-dvk
 137
 138 define Device/8dev_jalapeno-common
 139         $(call Device/FitImage)
 140         $(call Device/UbiFit)
 141         BLOCKSIZE := 128k
 142         PAGESIZE := 2048
 143         SOC := qcom-ipq4018
 144 endef
 145
 146 define Device/8dev_jalapeno
 147         $(call Device/8dev_jalapeno-common)
 148         DEVICE_VENDOR := 8devices
 149         DEVICE_MODEL := Jalapeno
 150 endef
 151 TARGET_DEVICES += 8dev_jalapeno
 152
 153 define Device/alfa-network_ap120c-ac
 154         $(call Device/FitImage)
 155         $(call Device/UbiFit)
 156         DEVICE_VENDOR := ALFA Network
 157         DEVICE_MODEL := AP120C-AC
 158         SOC := qcom-ipq4018
 159         DEVICE_PACKAGES := kmod-usb-acm kmod-tpm-i2c-atmel
 160         BLOCKSIZE := 128k
 161         PAGESIZE := 2048
 162         IMAGE_SIZE := 65536k
 163         IMAGES := factory.bin sysupgrade.bin
 164         IMAGE/factory.bin := append-ubi | qsdk-ipq-factory-nand
 165 endef
 166 TARGET_DEVICES += alfa-network_ap120c-ac
 167
 168 define Device/aruba_glenmorangie
 169         $(call Device/FitImageLzma)
 170         DEVICE_VENDOR := Aruba
 171         SOC := qcom-ipq4029
 172 endef
 173
 174 define Device/aruba_ap-303
 175         $(call Device/aruba_glenmorangie)
 176         DEVICE_MODEL := AP-303
 177 endef
 178 TARGET_DEVICES += aruba_ap-303
 179
 180 define Device/aruba_ap-303h
 181         $(call Device/aruba_glenmorangie)
 182         DEVICE_MODEL := AP-303H
 183 endef
 184 TARGET_DEVICES += aruba_ap-303h
 185
 186 define Device/aruba_ap-365
 187         $(call Device/aruba_glenmorangie)
 188         DEVICE_MODEL := AP-365
 189         DEVICE_PACKAGES := kmod-hwmon-ad7418
 190 endef
 191 TARGET_DEVICES += aruba_ap-365
 192
 193 define Device/asus_map-ac2200
 194         $(call Device/FitImageLzma)
 195         DEVICE_VENDOR := ASUS
 196         DEVICE_MODEL := Lyra (MAP-AC2200)
 197         SOC := qcom-ipq4019
 198         DEVICE_PACKAGES := ath10k-firmware-qca9888-ct kmod-ath3k
 199 endef
 200 TARGET_DEVICES += asus_map-ac2200
 201
 202 # WARNING: this is an initramfs image that gets you half of the way there
 203 #          you need to delete the jffs2 ubi volume and sysupgrade to the final image
 204 # to get a "trx" you can flash via web UI for ac42u/ac58u:
 205 # - change call Device/FitImageLzma to Device/FitImage
 206 # - add the following below UIMAGE_NAME
 207 #   UIMAGE_MAGIC := 0x27051956
 208 #   IMAGES += factory.trx
 209 #   IMAGE/factory.trx := copy-file $(KDIR)/tmp/$$(KERNEL_INITRAMFS_IMAGE) | uImage none
 210 define Device/asus_rt-ac42u
 211         $(call Device/FitImageLzma)
 212         DEVICE_VENDOR := ASUS
 213         DEVICE_MODEL := RT-AC42U
 214         DEVICE_ALT0_VENDOR := ASUS
 215         DEVICE_ALT0_MODEL := RT-ACRH17
 216         DEVICE_ALT1_VENDOR := ASUS
 217         DEVICE_ALT1_MODEL := RT-AC2200
 218         SOC := qcom-ipq4019
 219         BLOCKSIZE := 128k
 220         PAGESIZE := 2048
 221         IMAGE_SIZE := 20439364
 222         FILESYSTEMS := squashfs
 223 #       RT-AC82U is nowhere to be found online
 224 #       Rather, this device is a/k/a RT-AC42U
 225 #       But we'll go with what the vendor firmware has...
 226         UIMAGE_NAME:=$(shell echo -e '\03\01\01\01RT-AC82U')
 227         DEVICE_PACKAGES := ath10k-firmware-qca9984-ct kmod-usb-ledtrig-usbport
 228 endef
 229 TARGET_DEVICES += asus_rt-ac42u
 230
 231 define Device/asus_rt-ac58u
 232         $(call Device/FitImageLzma)
 233         DEVICE_VENDOR := ASUS
 234         DEVICE_MODEL := RT-AC58U
 235         DEVICE_ALT0_VENDOR := ASUS
 236         DEVICE_ALT0_MODEL := RT-ACRH13
 237         SOC := qcom-ipq4018
 238         BLOCKSIZE := 128k
 239         PAGESIZE := 2048
 240         IMAGE_SIZE := 20439364
 241         FILESYSTEMS := squashfs
 242 #       Someone - in their infinite wisdom - decided to put the firmware
 243 #       version in front of the image name \03\00\00\04 => Version 3.0.0.4
 244 #       Since u-boot works with strings we either need another fixup step
 245 #       to add a version... or we are very careful not to add '\0' into that
 246 #       string and call it a day.... Yeah, we do the latter!
 247         UIMAGE_NAME:=$(shell echo -e '\03\01\01\01RT-AC58U')
 248         DEVICE_PACKAGES := -kmod-ath10k-ct kmod-ath10k-ct-smallbuffers \
 249                 kmod-usb-ledtrig-usbport
 250 endef
 251 TARGET_DEVICES += asus_rt-ac58u
 252
 253 define Device/avm_fritzbox-4040
 254         $(call Device/FitImageLzma)
 255         DEVICE_VENDOR := AVM
 256         DEVICE_MODEL := FRITZ!Box 4040
 257         SOC := qcom-ipq4018
 258         BOARD_NAME := fritz4040
 259         IMAGE_SIZE := 29056k
 260         UBOOT_PATH := $(STAGING_DIR_IMAGE)/uboot-fritz4040.bin
 261         UBOOT_PARTITION_SIZE := 524288
 262         IMAGES += eva.bin
 263         IMAGE/eva.bin := append-uboot | pad-to $$$$(UBOOT_PARTITION_SIZE) | append-kernel | append-rootfs | pad-rootfs
 264         IMAGE/sysupgrade.bin := append-kernel | append-rootfs | pad-rootfs | check-size | append-metadata
 265         DEVICE_PACKAGES := fritz-tffs fritz-caldata
 266 endef
 267 TARGET_DEVICES += avm_fritzbox-4040
 268
 269 define Device/avm_fritzbox-7530
 270         $(call Device/FitImageLzma)
 271         DEVICE_VENDOR := AVM
 272         DEVICE_MODEL := FRITZ!Box 7530
 273         DEVICE_ALT0_VENDOR := AVM
 274         DEVICE_ALT0_MODEL := FRITZ!Box 7520
 275         SOC := qcom-ipq4019
 276         DEVICE_PACKAGES := fritz-caldata fritz-tffs-nand ltq-vdsl-vr11-app
 277 endef
 278 TARGET_DEVICES += avm_fritzbox-7530
 279
 280 define Device/avm_fritzrepeater-1200
 281         $(call Device/FitImageLzma)
 282         DEVICE_VENDOR := AVM
 283         DEVICE_MODEL := FRITZ!Repeater 1200
 284         SOC := qcom-ipq4019
 285         DEVICE_PACKAGES := fritz-caldata fritz-tffs-nand
 286 endef
 287 TARGET_DEVICES += avm_fritzrepeater-1200
 288
 289 define Device/avm_fritzrepeater-3000
 290         $(call Device/FitImageLzma)
 291         DEVICE_VENDOR := AVM
 292         DEVICE_MODEL := FRITZ!Repeater 3000
 293         SOC := qcom-ipq4019
 294         DEVICE_PACKAGES := ath10k-firmware-qca9984-ct fritz-caldata fritz-tffs-nand
 295 endef
 296 TARGET_DEVICES += avm_fritzrepeater-3000
 297
 298 define Device/buffalo_wtr-m2133hp
 299         $(call Device/FitImage)
 300         $(call Device/UbiFit)
 301         DEVICE_VENDOR := Buffalo
 302         DEVICE_MODEL := WTR-M2133HP
 303         SOC := qcom-ipq4019
 304         DEVICE_PACKAGES := ath10k-firmware-qca9984-ct
 305         BLOCKSIZE := 128k
 306         PAGESIZE := 2048
 307 endef
 308 # Missing DSA Setup
 309 #TARGET_DEVICES += buffalo_wtr-m2133hp
 310
 311 define Device/cellc_rtl30vw
 312         KERNEL_SUFFIX := -zImage.itb
 313         KERNEL_INITRAMFS = kernel-bin | gzip | fit gzip $$(KDIR)/image-$$(DEVICE_DTS).dtb
 314         KERNEL = kernel-bin | fit none $$(KDIR)/image-$$(DEVICE_DTS).dtb | uImage lzma | pad-to 2048
 315         KERNEL_NAME := zImage
 316         KERNEL_IN_UBI :=
 317         IMAGES := factory.bin sysupgrade.bin
 318         IMAGE/factory.bin := append-rootfshdr kernel | append-ubi | qsdk-ipq-factory-nand-askey kernel
 319         IMAGE/sysupgrade.bin := append-rootfshdr kernel | sysupgrade-tar kernel=$$$$@.kernel | append-metadata
 320         DEVICE_VENDOR := Cell C
 321         DEVICE_MODEL := RTL30VW
 322         SOC := qcom-ipq4019
 323         DEVICE_DTS_CONFIG := config@5
 324         KERNEL_INSTALL := 1
 325         KERNEL_SIZE := 4096k
 326         IMAGE_SIZE := 57344k
 327         BLOCKSIZE := 128k
 328         PAGESIZE := 2048
 329         DEVICE_PACKAGES := kmod-usb-net-qmi-wwan kmod-usb-serial-option uqmi
 330 endef
 331 TARGET_DEVICES += cellc_rtl30vw
 332
 333 define Device/cilab_meshpoint-one
 334         $(call Device/8dev_jalapeno-common)
 335         DEVICE_VENDOR := Crisis Innovation Lab
 336         DEVICE_MODEL := MeshPoint.One
 337         DEVICE_PACKAGES += kmod-i2c-gpio kmod-iio-bmp280-i2c kmod-hwmon-ina2xx kmod-rtc-pcf2127
 338 endef
 339 # Missing DSA Setup
 340 #TARGET_DEVICES += cilab_meshpoint-one
 341
 342 define Device/compex_wpj419
 343         $(call Device/FitImage)
 344         $(call Device/UbiFit)
 345         DEVICE_VENDOR := Compex
 346         DEVICE_MODEL := WPJ419
 347         SOC := qcom-ipq4019
 348         DEVICE_DTS_CONFIG := config@12
 349         KERNEL_INSTALL := 1
 350         BLOCKSIZE := 128k
 351         PAGESIZE := 2048
 352         FILESYSTEMS := squashfs
 353 endef
 354 # Missing DSA Setup
 355 #TARGET_DEVICES += compex_wpj419
 356
 357 define Device/compex_wpj428
 358         $(call Device/FitImage)
 359         DEVICE_VENDOR := Compex
 360         DEVICE_MODEL := WPJ428
 361         SOC := qcom-ipq4028
 362         DEVICE_DTS_CONFIG := config@4
 363         BLOCKSIZE := 64k
 364         IMAGE_SIZE := 31232k
 365         KERNEL_SIZE := 4096k
 366         IMAGES += cpximg-6a04.bin
 367         IMAGE/sysupgrade.bin := append-kernel | append-rootfs | pad-rootfs | append-metadata
 368         IMAGE/cpximg-6a04.bin := append-kernel | append-rootfs | pad-rootfs | mkmylofw_32m 0x8A2 3
 369         DEVICE_PACKAGES := kmod-gpio-beeper
 370         DEFAULT := n
 371 endef
 372 TARGET_DEVICES += compex_wpj428
 373
 374 define Device/devolo_magic-2-wifi-next
 375         $(call Device/FitImage)
 376         DEVICE_VENDOR := devolo
 377         DEVICE_MODEL := Magic 2 WiFi next
 378         SOC := qcom-ipq4018
 379         KERNEL_SIZE := 4096k
 380
 381         # If the bootloader sees 0xDEADC0DE and this trailer at the 64k boundary of a TFTP image
 382         # it will bootm it, just like we want for the initramfs.
 383         KERNEL_INITRAMFS := kernel-bin | gzip | fit gzip $$(KDIR)/image-$$(DEVICE_DTS).dtb | pad-to 64k |\
 384                 append-string -e '\xDE\xAD\xC0\xDE{"fl_initramfs":""}\x00'
 385
 386         IMAGE_SIZE := 26624k
 387         IMAGES := sysupgrade.bin
 388         IMAGE/sysupgrade.bin := append-kernel | append-rootfs | pad-rootfs | append-metadata
 389         DEFAULT := n
 390 endef
 391 # Missing DSA Setup
 392 #TARGET_DEVICES += devolo_magic-2-wifi-next
 393
 394 define Device/dlink_dap-2610
 395         $(call Device/FitImageLzma)
 396         DEVICE_VENDOR := D-Link
 397         DEVICE_MODEL := DAP-2610
 398         SOC := qcom-ipq4018
 399         DEVICE_DTS_CONFIG := config@ap.dk01.1-c1
 400         BLOCKSIZE := 64k
 401         WRGG_DEVNAME := /dev/mtdblock/8
 402         WRGG_SIGNATURE := wapac30_dkbs_dap2610
 403         IMAGE_SIZE := 14080k
 404         IMAGES += factory.bin
 405         # Bootloader expects a special 160 byte header which is added by
 406         # wrgg-image.
 407         # Factory image size must be larger than 6MB, and size in wrgg header must
 408         # match actual factory image size to be flashable from D-Link http server.
 409         # Bootloader verifies checksum of wrgg image before booting, thus jffs2
 410         # cannot be part of the wrgg image. This is solved in the factory image by
 411         # having the rootfs at the end of the image (without pad-rootfs). And in
 412         # the sysupgrade image only the kernel is included in the wrgg checksum,
 413         # but this is not flashable from the D-link http server.
 414         # append-rootfs must start on an erase block boundary.
 415         IMAGE/factory.bin    := append-kernel | pad-offset 6144k 160 | append-rootfs | wrgg-image | check-size
 416         IMAGE/sysupgrade.bin := append-kernel | wrgg-image | pad-to $$$$(BLOCKSIZE) | append-rootfs | pad-rootfs | check-size | append-metadata
 417 endef
 418 TARGET_DEVICES += dlink_dap-2610
 419
 420 define Device/edgecore_ecw5211
 421         $(call Device/FitImage)
 422         $(call Device/UbiFit)
 423         DEVICE_VENDOR := Edgecore
 424         DEVICE_MODEL := ECW5211
 425         SOC := qcom-ipq4018
 426         BLOCKSIZE := 128k
 427         PAGESIZE := 2048
 428         DEVICE_DTS_CONFIG := config@ap.dk01.1-c2
 429         DEVICE_PACKAGES := kmod-tpm-i2c-atmel kmod-usb-acm
 430 endef
 431 TARGET_DEVICES += edgecore_ecw5211
 432
 433 define Device/edgecore_oap100
 434         $(call Device/FitImage)
 435         $(call Device/UbiFit)
 436         DEVICE_VENDOR := Edgecore
 437         DEVICE_MODEL := OAP100
 438         SOC := qcom-ipq4019
 439         BLOCKSIZE := 128k
 440         PAGESIZE := 2048
 441         IMAGES := sysupgrade.bin
 442         DEVICE_DTS_CONFIG := config@ap.dk07.1-c1
 443         DEVICE_PACKAGES := kmod-usb-acm kmod-usb-net kmod-usb-net-cdc-qmi uqmi
 444 endef
 445 # Missing DSA Setup
 446 #TARGET_DEVICES += edgecore_oap100
 447
 448 define Device/engenius_eap1300
 449         $(call Device/FitImage)
 450         DEVICE_VENDOR := EnGenius
 451         DEVICE_MODEL := EAP1300
 452         DEVICE_DTS_CONFIG := config@4
 453         BOARD_NAME := eap1300
 454         SOC := qcom-ipq4018
 455         KERNEL_SIZE := 5120k
 456         IMAGE_SIZE := 25344k
 457         IMAGE/sysupgrade.bin := append-kernel | append-rootfs | pad-rootfs | append-metadata
 458 endef
 459 # Missing DSA Setup
 460 #TARGET_DEVICES += engenius_eap1300
 461
 462 define Device/engenius_eap2200
 463         $(call Device/FitImage)
 464         $(call Device/UbiFit)
 465         DEVICE_VENDOR := EnGenius
 466         DEVICE_MODEL := EAP2200
 467         SOC := qcom-ipq4019
 468         BLOCKSIZE := 128k
 469         PAGESIZE := 2048
 470         DEVICE_PACKAGES := ath10k-firmware-qca9888-ct -kmod-ath10k-ct kmod-ath10k-ct-smallbuffers
 471 endef
 472 # Missing DSA Setup
 473 #TARGET_DEVICES += engenius_eap2200
 474
 475 define Device/engenius_emd1
 476         $(call Device/FitImage)
 477         DEVICE_VENDOR := EnGenius
 478         DEVICE_MODEL := EMD1
 479         DEVICE_DTS_CONFIG := config@4
 480         SOC := qcom-ipq4018
 481         IMAGE_SIZE := 30720k
 482         IMAGES += factory.bin
 483         IMAGE/sysupgrade.bin := append-kernel | append-rootfs | pad-rootfs | append-metadata
 484         IMAGE/factory.bin := qsdk-ipq-factory-nor | check-size
 485 endef
 486 # Missing DSA Setup
 487 #TARGET_DEVICES += engenius_emd1
 488
 489 define Device/engenius_emr3500
 490         $(call Device/FitImage)
 491         DEVICE_VENDOR := EnGenius
 492         DEVICE_MODEL := EMR3500
 493         DEVICE_DTS_CONFIG := config@4
 494         SOC := qcom-ipq4018
 495         KERNEL_SIZE := 4096k
 496         IMAGE_SIZE := 30720k
 497         IMAGES += factory.bin
 498         IMAGE/sysupgrade.bin := append-kernel | append-rootfs | pad-rootfs | append-metadata
 499         IMAGE/factory.bin := qsdk-ipq-factory-nor | check-size
 500         DEFAULT := n
 501 endef
 502 # Missing DSA Setup
 503 #TARGET_DEVICES += engenius_emr3500
 504
 505 define Device/engenius_ens620ext
 506         $(call Device/FitImage)
 507         DEVICE_VENDOR := EnGenius
 508         DEVICE_MODEL := ENS620EXT
 509         SOC := qcom-ipq4018
 510         DEVICE_DTS_CONFIG := config@4
 511         BLOCKSIZE := 64k
 512         PAGESIZE := 256
 513         BOARD_NAME := ENS620EXT
 514         VENDOR_ID := 0x0101
 515         PRODUCT_ID := 0x79
 516         PRODUCT_ID_NEW := 0xA4
 517         DATECODE := 190507
 518         FW_VER := 3.1.2
 519         FW_VER_NEW := 3.5.6
 520         CW_VER := 1.8.99
 521         IMAGE_SIZE := 21312k
 522         KERNEL_SIZE := 5120k
 523         FILESYSTEMS := squashfs
 524         IMAGES += factory_30.bin factory_35.bin
 525         IMAGE/sysupgrade.bin := append-kernel | append-rootfs | pad-rootfs | check-size | append-metadata
 526         IMAGE/factory_30.bin := append-kernel | pad-to $$$$(KERNEL_SIZE) | append-rootfs | pad-rootfs | check-size | SenaoFW $$$$(PRODUCT_ID) $$$$(FW_VER)
 527         IMAGE/factory_35.bin := qsdk-ipq-factory-nor | check-size | SenaoFW $$$$(PRODUCT_ID_NEW) $$$$(FW_VER_NEW)
 528 endef
 529 # Missing DSA Setup
 530 #TARGET_DEVICES += engenius_ens620ext
 531
 532 define Device/extreme-networks_ws-ap3915i
 533         $(call Device/FitImage)
 534         DEVICE_VENDOR := Extreme Networks
 535         DEVICE_MODEL := WS-AP3915i
 536         IMAGE_SIZE := 30080k
 537         SOC := qcom-ipq4029
 538         BLOCKSIZE := 128k
 539         IMAGE/sysupgrade.bin := append-kernel | append-rootfs | pad-rootfs | check-size | append-metadata
 540 endef
 541 TARGET_DEVICES += extreme-networks_ws-ap3915i
 542
 543 define Device/ezviz_cs-w3-wd1200g-eup
 544         $(call Device/FitImage)
 545         DEVICE_VENDOR := EZVIZ
 546         DEVICE_MODEL := CS-W3-WD1200G
 547         DEVICE_VARIANT := EUP
 548         IMAGE_SIZE := 14848k
 549         KERNEL_SIZE = 6m
 550         SOC := qcom-ipq4018
 551         IMAGE/sysupgrade.bin := append-kernel | append-rootfs | pad-rootfs | \
 552                 append-metadata
 553         DEVICE_PACKAGES := -kmod-ath10k-ct kmod-ath10k-ct-smallbuffers
 554         DEVICE_COMPAT_VERSION := 2.0
 555         DEVICE_COMPAT_MESSAGE := uboot's bootcmd has to be updated (see wiki). \
 556                 Upgrade via sysupgrade mechanism is not possible.
 557 endef
 558 TARGET_DEVICES += ezviz_cs-w3-wd1200g-eup
 559
 560 define Device/glinet_gl-a1300
 561         $(call Device/FitImage)
 562         $(call Device/UbiFit)
 563         DEVICE_VENDOR := GL.iNet
 564         DEVICE_MODEL := GL-A1300
 565         SOC := qcom-ipq4018
 566         DEVICE_DTS_CONFIG := config@ap.dk01.1-c2
 567         BLOCKSIZE := 128k
 568         PAGESIZE := 2048
 569         IMAGE_SIZE := 131072k
 570 endef
 571 TARGET_DEVICES += glinet_gl-a1300
 572
 573 define Device/glinet_gl-ap1300
 574         $(call Device/FitImage)
 575         $(call Device/UbiFit)
 576         DEVICE_VENDOR := GL.iNet
 577         DEVICE_MODEL := GL-AP1300
 578         SOC := qcom-ipq4018
 579         DEVICE_DTS_CONFIG := config@ap.dk01.1-c2
 580         BLOCKSIZE := 128k
 581         PAGESIZE := 2048
 582         IMAGE_SIZE := 131072k
 583         KERNEL_INSTALL := 1
 584         DEVICE_PACKAGES := kmod-usb-net-qmi-wwan kmod-usb-serial-option uqmi
 585 endef
 586 TARGET_DEVICES += glinet_gl-ap1300
 587
 588 define Device/glinet_gl-b1300
 589         $(call Device/FitzImage)
 590         DEVICE_VENDOR := GL.iNet
 591         DEVICE_MODEL := GL-B1300
 592         BOARD_NAME := gl-b1300
 593         SOC := qcom-ipq4029
 594         KERNEL_SIZE := 4096k
 595         IMAGE_SIZE := 26624k
 596         IMAGE/sysupgrade.bin := append-kernel |append-rootfs | pad-rootfs | append-metadata
 597 endef
 598 TARGET_DEVICES += glinet_gl-b1300
 599
 600 define Device/glinet_gl-b2200
 601         $(call Device/FitzImage)
 602         DEVICE_VENDOR := GL.iNet
 603         DEVICE_MODEL := GL-B2200
 604         SOC := qcom-ipq4019
 605         DEVICE_DTS_CONFIG := config@ap.dk04.1-c3
 606         KERNEL_INITRAMFS_SUFFIX := -recovery.itb
 607         IMAGES := emmc.img.gz sysupgrade.bin
 608         IMAGE/emmc.img.gz := qsdk-ipq-app-gpt |\
 609                 pad-to 1024k | append-kernel |\
 610                 pad-to 33792k | append-rootfs |\
 611                 append-metadata | gzip
 612         IMAGE/sysupgrade.bin := sysupgrade-tar | append-metadata
 613         DEVICE_PACKAGES := ath10k-firmware-qca9888-ct \
 614                 kmod-fs-ext4 kmod-mmc kmod-spi-dev mkf2fs e2fsprogs kmod-fs-f2fs
 615 endef
 616 TARGET_DEVICES += glinet_gl-b2200
 617
 618 define Device/glinet_gl-s1300
 619         $(call Device/FitzImage)
 620         DEVICE_VENDOR := GL.iNet
 621         DEVICE_MODEL := GL-S1300
 622         SOC := qcom-ipq4029
 623         KERNEL_SIZE := 4096k
 624         IMAGE_SIZE := 26624k
 625         IMAGES := sysupgrade.bin
 626         IMAGE/sysupgrade.bin := append-kernel | append-rootfs | pad-rootfs | append-metadata
 627         DEVICE_PACKAGES := kmod-fs-ext4 kmod-mmc kmod-spi-dev
 628 endef
 629 # Missing DSA Setup
 630 #TARGET_DEVICES += glinet_gl-s1300
 631
 632 define Device/kernel-size-6350-8300
 633         DEVICE_COMPAT_VERSION := 2.0
 634         DEVICE_COMPAT_MESSAGE := Kernel partition size must be increased for \
 635         this OpenWrt version. Before continuing, you MUST issue either the \
 636         command "fw_setenv kernsize 500000" from the OpenWrt command line, \
 637         or "setenv kernsize 500000 ; saveenv" from the U-Boot serial console. \
 638         Instead of the sysupgrade image, you must then install the OpenWrt \
 639         factory image, setting the force flag and wiping the configuration. \
 640         (e.g. "sysupgrade -n -F openwrt-squashfs-factory.bin" on command line)
 641 endef
 642
 643 define Device/linksys_ea6350v3
 644         # The Linksys EA6350v3 has a uboot bootloader that does not
 645         # support either booting lzma kernel images nor booting UBI
 646         # partitions. This uboot, however, supports raw kernel images and
 647         # gzipped images.
 648         #
 649         # As configured by the OEM factory, the device will boot the kernel
 650         # from a fixed address with a fixed length of 3 MiB. Also, the
 651         # device has a hard-coded kernel command line that requires the
 652         # rootfs and alt_rootfs to be in mtd11 and mtd13 respectively.
 653         # Oh... and the kernel partition overlaps with the rootfs
 654         # partition (the same for alt_kernel and alt_rootfs).
 655         #
 656         # If you are planing re-partitioning the device, you may want to
 657         # keep these details in mind:
 658         # 1. The kernel addresses you should honor are 0x00000000 and
 659         #    0x02800000 respectively.
 660         # 2. The kernel size (plus the dtb) cannot exceed 3 MiB in size
 661         #    unless the uboot environment variable "kernsize" is increased.
 662         # 3. You can use 'zImage', but not a raw 'Image' packed with lzma.
 663         # 4. The kernel command line from uboot is harcoded to boot with
 664         #    rootfs either in mtd11 or mtd13.
 665         $(call Device/FitzImage)
 666         $(call Device/kernel-size-6350-8300)
 667         DEVICE_VENDOR := Linksys
 668         DEVICE_MODEL := EA6350
 669         DEVICE_VARIANT := v3
 670         SOC := qcom-ipq4018
 671         BLOCKSIZE := 128k
 672         PAGESIZE := 2048
 673         KERNEL_SIZE := 5120k
 674         IMAGE_SIZE := 35840k
 675         UBINIZE_OPTS := -E 5
 676         IMAGES += factory.bin
 677         IMAGE/factory.bin := append-kernel | append-uImage-fakehdr filesystem | pad-to $$$$(KERNEL_SIZE) | append-ubi | linksys-image type=EA6350v3
 678 endef
 679 TARGET_DEVICES += linksys_ea6350v3
 680
 681 define Device/linksys_ea8300
 682         $(call Device/FitzImage)
 683         $(call Device/kernel-size-6350-8300)
 684         DEVICE_VENDOR := Linksys
 685         DEVICE_MODEL := EA8300
 686         SOC := qcom-ipq4019
 687         KERNEL_SIZE := 5120k
 688         IMAGE_SIZE := 84992k
 689         BLOCKSIZE := 128k
 690         PAGESIZE := 2048
 691         UBINIZE_OPTS := -E 5    # EOD marks to "hide" factory sig at EOF
 692         IMAGES += factory.bin
 693         IMAGE/factory.bin  := append-kernel | pad-to $$$$(KERNEL_SIZE) | append-ubi | linksys-image type=EA8300
 694         DEVICE_PACKAGES := ath10k-firmware-qca9888-ct kmod-usb-ledtrig-usbport
 695 endef
 696 TARGET_DEVICES += linksys_ea8300
 697
 698 define Device/linksys_mr8300
 699         $(call Device/FitzImage)
 700         $(call Device/kernel-size-6350-8300)
 701         DEVICE_VENDOR := Linksys
 702         DEVICE_MODEL := MR8300
 703         SOC := qcom-ipq4019
 704         KERNEL_SIZE := 5120k
 705         IMAGE_SIZE := 84992k
 706         BLOCKSIZE := 128k
 707         PAGESIZE := 2048
 708         UBINIZE_OPTS := -E 5    # EOD marks to "hide" factory sig at EOF
 709         IMAGES += factory.bin
 710         IMAGE/factory.bin  := append-kernel | pad-to $$$$(KERNEL_SIZE) | append-ubi | linksys-image type=MR8300
 711         DEVICE_PACKAGES := ath10k-firmware-qca9888-ct kmod-usb-ledtrig-usbport
 712 endef
 713 TARGET_DEVICES += linksys_mr8300
 714
 715 define Device/linksys_whw03v2
 716         $(call Device/FitzImage)
 717         DEVICE_VENDOR := Linksys
 718         DEVICE_MODEL := WHW03
 719         DEVICE_VARIANT := V2
 720         SOC := qcom-ipq4019
 721         KERNEL_SIZE := 6144k
 722         IMAGE_SIZE := 158720k
 723         BLOCKSIZE := 128k
 724         PAGESIZE := 2048
 725         UBINIZE_OPTS := -E 5    # EOD marks to "hide" factory sig at EOF
 726         IMAGES += factory.bin
 727         IMAGE/factory.bin  := append-kernel | pad-to $$$$(KERNEL_SIZE) | append-ubi | linksys-image type=WHW03v2
 728         DEVICE_PACKAGES := ath10k-firmware-qca9888-ct kmod-leds-pca963x kmod-spi-dev kmod-bluetooth
 729 endef
 730 TARGET_DEVICES += linksys_whw03v2
 731
 732 define Device/linksys_whw01
 733         $(call Device/FitzImage)
 734         DEVICE_VENDOR := Linksys
 735         DEVICE_MODEL := WHW01
 736         KERNEL_SIZE := 6144k
 737         IMAGE_SIZE := 75776K
 738         SOC := qcom-ipq4018
 739         BLOCKSIZE := 128k
 740         PAGESIZE := 2048
 741         UBINIZE_OPTS := -E 5    # EOD marks to "hide" factory sig at EOF
 742         IMAGES += factory.bin
 743         IMAGE/factory.bin := append-kernel | pad-to $$$$(KERNEL_SIZE) | append-ubi | linksys-image type=WHW01
 744         DEVICE_PACKAGES := uboot-envtools kmod-leds-pca963x
 745 endef
 746 TARGET_DEVICES += linksys_whw01
 747
 748 define Device/luma_wrtq-329acn
 749         $(call Device/FitImage)
 750         DEVICE_VENDOR := Luma Home
 751         DEVICE_MODEL := WRTQ-329ACN
 752         SOC := qcom-ipq4018
 753         DEVICE_PACKAGES := kmod-ath3k kmod-eeprom-at24 kmod-i2c-gpio
 754         IMAGE_SIZE := 76632k
 755         BLOCKSIZE := 128k
 756         PAGESIZE := 2048
 757 endef
 758 TARGET_DEVICES += luma_wrtq-329acn
 759
 760 define Device/meraki_mr33
 761         $(call Device/FitImage)
 762         DEVICE_VENDOR := Cisco Meraki
 763         DEVICE_MODEL := MR33
 764         SOC := qcom-ipq4029
 765         BLOCKSIZE := 128k
 766         PAGESIZE := 2048
 767         DEVICE_PACKAGES := -swconfig ath10k-firmware-qca9887-ct
 768 endef
 769 TARGET_DEVICES += meraki_mr33
 770
 771 define Device/meraki_mr74
 772         $(call Device/FitImage)
 773         DEVICE_VENDOR := Cisco Meraki
 774         DEVICE_MODEL := MR74
 775         SOC := qcom-ipq4029
 776         BLOCKSIZE := 128k
 777         PAGESIZE := 2048
 778         DEVICE_PACKAGES := -swconfig ath10k-firmware-qca9887-ct
 779         DEVICE_DTS_CONFIG := config@3
 780 endef
 781 TARGET_DEVICES += meraki_mr74
 782
 783 define Device/mobipromo_cm520-79f
 784         $(call Device/FitzImage)
 785         $(call Device/UbiFit)
 786         DEVICE_VENDOR := MobiPromo
 787         DEVICE_MODEL := CM520-79F
 788         SOC := qcom-ipq4019
 789         BLOCKSIZE := 128k
 790         PAGESIZE := 2048
 791         DEVICE_PACKAGES := kmod-usb-ledtrig-usbport
 792 endef
 793 TARGET_DEVICES += mobipromo_cm520-79f
 794
 795 define Device/netgear_ex61x0v2
 796         $(call Device/DniImage)
 797         DEVICE_VENDOR := NETGEAR
 798         DEVICE_DTS_CONFIG := config@4
 799         NETGEAR_BOARD_ID := EX6150v2series
 800         NETGEAR_HW_ID := 29765285+16+0+128+2x2
 801         IMAGE_SIZE := 14400k
 802         SOC := qcom-ipq4018
 803 endef
 804
 805 define Device/netgear_ex6100v2
 806         $(call Device/netgear_ex61x0v2)
 807         DEVICE_MODEL := EX6100
 808         DEVICE_VARIANT := v2
 809 endef
 810 TARGET_DEVICES += netgear_ex6100v2
 811
 812 define Device/netgear_ex6150v2
 813         $(call Device/netgear_ex61x0v2)
 814         DEVICE_MODEL := EX6150
 815         DEVICE_VARIANT := v2
 816 endef
 817 TARGET_DEVICES += netgear_ex6150v2
 818
 819 define Device/netgear_orbi
 820         $(call Device/DniImage)
 821         SOC := qcom-ipq4019
 822         DEVICE_VENDOR := NETGEAR
 823         IMAGE/factory.img := append-kernel | pad-offset 128k 64 | \
 824                 append-uImage-fakehdr filesystem | pad-to $$$$(KERNEL_SIZE) | \
 825                 append-rootfs | pad-rootfs | netgear-dni
 826         IMAGE/sysupgrade.bin/squashfs := append-rootfs | pad-to 64k | \
 827                 sysupgrade-tar rootfs=$$$$@ | append-metadata
 828         DEVICE_PACKAGES := ath10k-firmware-qca9984-ct e2fsprogs kmod-fs-ext4 losetup
 829 endef
 830
 831 define Device/netgear_rbx50
 832         $(call Device/netgear_orbi)
 833         NETGEAR_HW_ID := 29765352+0+4000+512+2x2+2x2+4x4
 834         KERNEL_SIZE := 3932160
 835         ROOTFS_SIZE := 32243712
 836         IMAGE_SIZE := 36175872
 837 endef
 838
 839 define Device/netgear_rbr50
 840         $(call Device/netgear_rbx50)
 841         DEVICE_MODEL := RBR50
 842         DEVICE_VARIANT := v1
 843         NETGEAR_BOARD_ID := RBR50
 844 endef
 845 TARGET_DEVICES += netgear_rbr50
 846
 847 define Device/netgear_rbs50
 848         $(call Device/netgear_rbx50)
 849         DEVICE_MODEL := RBS50
 850         DEVICE_VARIANT := v1
 851         NETGEAR_BOARD_ID := RBS50
 852 endef
 853 TARGET_DEVICES += netgear_rbs50
 854
 855 define Device/netgear_srx60
 856         $(call Device/netgear_orbi)
 857         NETGEAR_HW_ID := 29765352+0+4096+512+2x2+2x2+4x4
 858         KERNEL_SIZE := 3932160
 859         ROOTFS_SIZE := 32243712
 860         IMAGE_SIZE := 36175872
 861 endef
 862
 863 define Device/netgear_srr60
 864         $(call Device/netgear_srx60)
 865         DEVICE_MODEL := SRR60
 866         NETGEAR_BOARD_ID := SRR60
 867 endef
 868 TARGET_DEVICES += netgear_srr60
 869
 870 define Device/netgear_srs60
 871         $(call Device/netgear_srx60)
 872         DEVICE_MODEL := SRS60
 873         NETGEAR_BOARD_ID := SRS60
 874 endef
 875 TARGET_DEVICES += netgear_srs60
 876
 877 define Device/netgear_wac510
 878         $(call Device/FitImage)
 879         $(call Device/UbiFit)
 880         DEVICE_VENDOR := Netgear
 881         DEVICE_MODEL := WAC510
 882         SOC := qcom-ipq4018
 883         DEVICE_DTS_CONFIG := config@5
 884         BLOCKSIZE := 128k
 885         PAGESIZE := 2048
 886         IMAGES += factory.tar
 887         IMAGE/factory.tar := append-ubi | wac5xx-netgear-tar
 888         DEVICE_PACKAGES := uboot-envtools
 889 endef
 890 TARGET_DEVICES += netgear_wac510
 891
 892 define Device/openmesh_a42
 893         $(call Device/FitImageLzma)
 894         DEVICE_VENDOR := OpenMesh
 895         DEVICE_MODEL := A42
 896         SOC := qcom-ipq4018
 897         DEVICE_DTS_CONFIG := config@om.a42
 898         BLOCKSIZE := 64k
 899         KERNEL = kernel-bin | lzma | fit lzma $$(KDIR)/image-$$(DEVICE_DTS).dtb | pad-to $$(BLOCKSIZE)
 900         IMAGE_SIZE := 15616k
 901         IMAGES += factory.bin
 902         IMAGE/factory.bin := append-rootfs | pad-rootfs | openmesh-image ce_type=A42
 903         IMAGE/sysupgrade.bin/squashfs := append-rootfs | pad-rootfs | sysupgrade-tar rootfs=$$$$@ | append-metadata
 904 endef
 905 TARGET_DEVICES += openmesh_a42
 906
 907 define Device/openmesh_a62
 908         $(call Device/FitImageLzma)
 909         DEVICE_VENDOR := OpenMesh
 910         DEVICE_MODEL := A62
 911         SOC := qcom-ipq4019
 912         DEVICE_DTS_CONFIG := config@om.a62
 913         BLOCKSIZE := 64k
 914         KERNEL = kernel-bin | lzma | fit lzma $$(KDIR)/image-$$(DEVICE_DTS).dtb | pad-to $$(BLOCKSIZE)
 915         IMAGE_SIZE := 15552k
 916         IMAGES += factory.bin
 917         IMAGE/factory.bin := append-rootfs | pad-rootfs | openmesh-image ce_type=A62
 918         IMAGE/sysupgrade.bin/squashfs := append-rootfs | pad-rootfs | sysupgrade-tar rootfs=$$$$@ | append-metadata
 919         DEVICE_PACKAGES := ath10k-firmware-qca9888-ct
 920 endef
 921 TARGET_DEVICES += openmesh_a62
 922
 923 define Device/p2w_r619ac
 924         $(call Device/FitzImage)
 925         $(call Device/UbiFit)
 926         DEVICE_VENDOR := P&W
 927         DEVICE_MODEL := R619AC
 928         SOC := qcom-ipq4019
 929         DEVICE_DTS_CONFIG := config@10
 930         BLOCKSIZE := 128k
 931         PAGESIZE := 2048
 932 endef
 933
 934 define Device/p2w_r619ac-64m
 935         $(call Device/p2w_r619ac)
 936         DEVICE_VARIANT := 64M NAND
 937         IMAGES += factory.bin
 938         IMAGE/factory.bin := append-ubi | qsdk-ipq-factory-nand
 939 endef
 940 TARGET_DEVICES += p2w_r619ac-64m
 941
 942 define Device/p2w_r619ac-128m
 943         $(call Device/p2w_r619ac)
 944         DEVICE_VARIANT := 128M NAND
 945 endef
 946 TARGET_DEVICES += p2w_r619ac-128m
 947
 948 define Device/pakedge_wr-1
 949         $(call Device/FitImageLzma)
 950         DEVICE_VENDOR := Pakedge
 951         DEVICE_MODEL := WR-1
 952         DEVICE_DTS_CONFIG := config@ap.dk01.1-c1
 953         SOC := qcom-ipq4018
 954         BLOCKSIZE := 64k
 955         IMAGE_SIZE := 31232k
 956         IMAGE/sysupgrade.bin := append-kernel | pad-to $$$$(BLOCKSIZE) | append-rootfs | pad-rootfs | append-metadata
 957 endef
 958 TARGET_DEVICES += pakedge_wr-1
 959
 960 define Device/plasmacloud_pa1200
 961         $(call Device/FitImageLzma)
 962         DEVICE_VENDOR := Plasma Cloud
 963         DEVICE_MODEL := PA1200
 964         SOC := qcom-ipq4018
 965         DEVICE_DTS_CONFIG := config@pc.pa1200
 966         BLOCKSIZE := 64k
 967         KERNEL = kernel-bin | lzma | fit lzma $$(KDIR)/image-$$(DEVICE_DTS).dtb | pad-to $$(BLOCKSIZE)
 968         IMAGE_SIZE := 15616k
 969         IMAGES += factory.bin
 970         IMAGE/factory.bin := append-rootfs | pad-rootfs | openmesh-image ce_type=PA1200
 971         IMAGE/sysupgrade.bin/squashfs := append-rootfs | pad-rootfs | sysupgrade-tar rootfs=$$$$@ | append-metadata
 972 endef
 973 TARGET_DEVICES += plasmacloud_pa1200
 974
 975 define Device/plasmacloud_pa2200
 976         $(call Device/FitImageLzma)
 977         DEVICE_VENDOR := Plasma Cloud
 978         DEVICE_MODEL := PA2200
 979         SOC := qcom-ipq4019
 980         DEVICE_DTS_CONFIG := config@pc.pa2200
 981         BLOCKSIZE := 64k
 982         KERNEL = kernel-bin | lzma | fit lzma $$(KDIR)/image-$$(DEVICE_DTS).dtb | pad-to $$(BLOCKSIZE)
 983         IMAGE_SIZE := 15552k
 984         IMAGES += factory.bin
 985         IMAGE/factory.bin := append-rootfs | pad-rootfs | openmesh-image ce_type=PA2200
 986         IMAGE/sysupgrade.bin/squashfs := append-rootfs | pad-rootfs | sysupgrade-tar rootfs=$$$$@ | append-metadata
 987         DEVICE_PACKAGES := ath10k-firmware-qca9888-ct
 988 endef
 989 TARGET_DEVICES += plasmacloud_pa2200
 990
 991 define Device/qcom_ap-dk01.1-c1
 992         DEVICE_VENDOR := Qualcomm Atheros
 993         DEVICE_MODEL := AP-DK01.1
 994         DEVICE_VARIANT := C1
 995         BOARD_NAME := ap-dk01.1-c1
 996         SOC := qcom-ipq4019
 997         DEVICE_DTS := qcom-ipq4019-ap.dk01.1-c1
 998         KERNEL_INSTALL := 1
 999         KERNEL_SIZE := 4096k
1000         IMAGE_SIZE := 26624k
1001         $(call Device/FitImage)
1002         IMAGE/sysupgrade.bin := append-kernel | pad-to $$$$(KERNEL_SIZE) | append-rootfs | pad-rootfs | append-metadata
1003         DEFAULT := n
1004 endef
1005 TARGET_DEVICES += qcom_ap-dk01.1-c1
1006
1007 define Device/qcom_ap-dk04.1-c1
1008         $(call Device/FitImage)
1009         $(call Device/UbiFit)
1010         DEVICE_VENDOR := Qualcomm Atheros
1011         DEVICE_MODEL := AP-DK04.1
1012         DEVICE_VARIANT := C1
1013         SOC := qcom-ipq4019
1014         DEVICE_DTS := qcom-ipq4019-ap.dk04.1-c1
1015         KERNEL_INSTALL := 1
1016         KERNEL_SIZE := 4048k
1017         BLOCKSIZE := 128k
1018         PAGESIZE := 2048
1019         BOARD_NAME := ap-dk04.1-c1
1020         DEFAULT := n
1021 endef
1022 TARGET_DEVICES += qcom_ap-dk04.1-c1
1023
1024 define Device/qxwlan_e2600ac-c1
1025         $(call Device/FitImage)
1026         DEVICE_VENDOR := Qxwlan
1027         DEVICE_MODEL := E2600AC
1028         DEVICE_VARIANT := C1
1029         BOARD_NAME := e2600ac-c1
1030         SOC := qcom-ipq4019
1031         KERNEL_SIZE := 4096k
1032         IMAGE_SIZE := 31232k
1033         IMAGE/sysupgrade.bin := append-kernel | append-rootfs | pad-rootfs | append-metadata
1034         DEFAULT := n
1035 endef
1036 TARGET_DEVICES += qxwlan_e2600ac-c1
1037
1038 define Device/qxwlan_e2600ac-c2
1039         $(call Device/FitImage)
1040         $(call Device/UbiFit)
1041         DEVICE_VENDOR := Qxwlan
1042         DEVICE_MODEL := E2600AC
1043         DEVICE_VARIANT := C2
1044         SOC := qcom-ipq4019
1045         KERNEL_INSTALL := 1
1046         BLOCKSIZE := 128k
1047         PAGESIZE := 2048
1048 endef
1049 # Missing DSA Setup
1050 #TARGET_DEVICES += qxwlan_e2600ac-c2
1051
1052 define Device/sony_ncp-hg100-cellular
1053         $(call Device/FitImage)
1054         DEVICE_VENDOR := Sony
1055         DEVICE_MODEL := NCP-HG100/Cellular
1056         DEVICE_DTS_CONFIG := config@ap.dk04.1-c4
1057         SOC := qcom-ipq4019
1058         KERNEL_SIZE := 8192k
1059         IMAGE_SIZE := 128m
1060         DEVICE_PACKAGES := e2fsprogs kmod-fs-ext4 uqmi
1061 endef
1062 TARGET_DEVICES += sony_ncp-hg100-cellular
1063
1064 define Device/teltonika_rutx10
1065         $(call Device/FitImage)
1066         $(call Device/UbiFit)
1067         DEVICE_VENDOR := Teltonika
1068         DEVICE_MODEL := RUTX10
1069         SOC := qcom-ipq4018
1070         DEVICE_DTS_CONFIG := config@5
1071         KERNEL_INSTALL := 1
1072         BLOCKSIZE := 128k
1073         PAGESIZE := 2048
1074         FILESYSTEMS := squashfs
1075         IMAGE/factory.ubi := append-ubi | qsdk-ipq-factory-nand | append-rutx-metadata
1076         DEVICE_PACKAGES := kmod-bluetooth
1077 endef
1078 # Missing DSA Setup
1079 #TARGET_DEVICES += teltonika_rutx10
1080
1081 define Device/tel_x1pro
1082         $(call Device/FitImage)
1083         DEVICE_VENDOR := Telco
1084         DEVICE_MODEL := X1 Pro
1085         SOC := qcom-ipq4019
1086         KERNEL_SIZE := 4096k
1087         IMAGE_SIZE := 31232k
1088         IMAGE/sysupgrade.bin := append-kernel | append-rootfs | pad-rootfs | append-metadata
1089         DEVICE_PACKAGES := kmod-usb-net-qmi-wwan kmod-usb-serial-option uqmi
1090         DEFAULT := n
1091 endef
1092 # Missing DSA Setup
1093 #TARGET_DEVICES += tel_x1pro
1094
1095 define Device/unielec_u4019-32m
1096         $(call Device/FitImage)
1097         DEVICE_VENDOR := Unielec
1098         DEVICE_MODEL := U4019
1099         DEVICE_VARIANT := 32M
1100         BOARD_NAME := u4019-32m
1101         SOC := qcom-ipq4019
1102         KERNEL_SIZE := 4096k
1103         IMAGE_SIZE := 31232k
1104         IMAGE/sysupgrade.bin := append-kernel | append-rootfs | pad-rootfs | append-metadata
1105         DEFAULT := n
1106 endef
1107 # Missing DSA Setup
1108 #TARGET_DEVICES += unielec_u4019-32m
1109
1110 define Device/wallys_dr40x9
1111         $(call Device/FitImage)
1112         $(call Device/UbiFit)
1113         DEVICE_VENDOR := Wallys
1114         DEVICE_MODEL := DR40X9
1115         SOC := qcom-ipq40x9
1116         DEVICE_DTS_CONFIG := config@ap.dk07.1-c1
1117         BLOCKSIZE := 128k
1118         PAGESIZE := 2048
1119         DEVICE_PACKAGES := ipq-wifi-wallys_dr40x9
1120 endef
1121 TARGET_DEVICES += wallys_dr40x9
1122
1123 define Device/zte_mf18a
1124         $(call Device/FitImage)
1125         DEVICE_VENDOR := ZTE
1126         DEVICE_MODEL := MF18A
1127         SOC := qcom-ipq4019
1128         DEVICE_DTS_CONFIG := config@ap.dk04.1-c1
1129         BLOCKSIZE := 128k
1130         PAGESIZE := 2048
1131         KERNEL_IN_UBI := 1
1132         DEVICE_PACKAGES := ath10k-firmware-qca99x0-ct
1133 endef
1134 TARGET_DEVICES += zte_mf18a
1135
1136 define Device/zte_mf28x_common
1137         $(call Device/FitzImage)
1138         DEVICE_VENDOR := ZTE
1139         SOC := qcom-ipq4019
1140         DEVICE_DTS_CONFIG := config@ap.dk04.1-c1
1141         BLOCKSIZE := 128k
1142         PAGESIZE := 2048
1143         KERNEL_IN_UBI := 1
1144         DEVICE_PACKAGES := kmod-usb-net-qmi-wwan kmod-usb-serial-option uqmi
1145 endef
1146
1147 define Device/zte_mf286d
1148         $(call Device/zte_mf28x_common)
1149         DEVICE_MODEL := MF286D
1150 endef
1151 TARGET_DEVICES += zte_mf286d
1152
1153 define Device/zte_mf289f
1154         $(call Device/zte_mf28x_common)
1155         DEVICE_MODEL := MF289F
1156         DEVICE_PACKAGES += ath10k-firmware-qca9984-ct
1157 endef
1158 TARGET_DEVICES += zte_mf289f
1159
1160 define Device/zyxel_nbg6617
1161         $(call Device/FitImageLzma)
1162         DEVICE_VENDOR := ZyXEL
1163         DEVICE_MODEL := NBG6617
1164         SOC := qcom-ipq4018
1165         KERNEL_SIZE := 4096k
1166         ROOTFS_SIZE := 24960k
1167         RAS_BOARD := NBG6617
1168         RAS_ROOTFS_SIZE := 19840k
1169         RAS_VERSION := "$(VERSION_DIST) $(REVISION)"
1170         IMAGE/sysupgrade.bin := append-kernel | append-rootfs | pad-rootfs | append-metadata
1171         IMAGES += factory.bin
1172 #       The ZyXEL firmware allows flashing thru the web-gui only when the rootfs is
1173 #       at least as large as the one of the initial firmware image (not the current
1174 #       one on the device). This only applies to the Web-UI, the bootlaoder ignores
1175 #       this minimum-size. However, the larger image can be flashed both ways.
1176         IMAGE/factory.bin := append-rootfs | pad-rootfs | pad-to 64k | check-size $$$$(ROOTFS_SIZE) | zyxel-ras-image separate-kernel
1177         IMAGE/sysupgrade.bin/squashfs := append-rootfs | pad-rootfs | check-size $$$$(ROOTFS_SIZE) | sysupgrade-tar rootfs=$$$$@ | append-metadata
1178         DEVICE_PACKAGES := kmod-usb-ledtrig-usbport
1179 endef
1180 TARGET_DEVICES += zyxel_nbg6617
1181
1182 define Device/zyxel_wre6606
1183         $(call Device/FitImage)
1184         DEVICE_VENDOR := ZyXEL
1185         DEVICE_MODEL := WRE6606
1186         DEVICE_DTS_CONFIG := config@4
1187         SOC := qcom-ipq4018
1188         IMAGE_SIZE := 13184k
1189         IMAGE/sysupgrade.bin := append-kernel | append-rootfs | pad-rootfs | check-size | append-metadata
1190         DEVICE_PACKAGES := -kmod-ath10k-ct kmod-ath10k-ct-smallbuffers
1191 endef
1192 # Missing DSA Setup
1193 #TARGET_DEVICES += zyxel_wre6606