target/linux/ipq40xx/image/generic.mk

   1
   2 DEVICE_VARS += NETGEAR_BOARD_ID NETGEAR_HW_ID
   3 DEVICE_VARS += RAS_BOARD RAS_ROOTFS_SIZE RAS_VERSION
   4 DEVICE_VARS += WRGG_DEVNAME WRGG_SIGNATURE
   5
   6 define Device/FitImage
   7         KERNEL_SUFFIX := -uImage.itb
   8         KERNEL = kernel-bin | gzip | fit gzip $$(KDIR)/image-$$(DEVICE_DTS).dtb
   9         KERNEL_NAME := Image
  10 endef
  11
  12 define Device/FitImageLzma
  13         KERNEL_SUFFIX := -uImage.itb
  14         KERNEL = kernel-bin | lzma | fit lzma $$(KDIR)/image-$$(DEVICE_DTS).dtb
  15         KERNEL_NAME := Image
  16 endef
  17
  18 define Device/FitzImage
  19         KERNEL_SUFFIX := -zImage.itb
  20         KERNEL = kernel-bin | fit none $$(KDIR)/image-$$(DEVICE_DTS).dtb
  21         KERNEL_NAME := zImage
  22 endef
  23
  24 define Device/UbiFit
  25         KERNEL_IN_UBI := 1
  26         IMAGES := factory.ubi sysupgrade.bin
  27         IMAGE/factory.ubi := append-ubi
  28         IMAGE/sysupgrade.bin := sysupgrade-tar | append-metadata
  29 endef
  30
  31 define Device/DniImage
  32         $(call Device/FitzImage)
  33         NETGEAR_BOARD_ID :=
  34         NETGEAR_HW_ID :=
  35         IMAGES += factory.img
  36         IMAGE/factory.img := append-kernel | pad-offset 64k 64 | append-uImage-fakehdr filesystem | append-rootfs | pad-rootfs | netgear-dni
  37         IMAGE/sysupgrade.bin := append-kernel | pad-offset 64k 64 | append-uImage-fakehdr filesystem | \
  38                 append-rootfs | pad-rootfs | check-size | append-metadata
  39 endef
  40
  41 define Build/append-rootfshdr
  42         mkimage -A $(LINUX_KARCH) \
  43                 -O linux -T filesystem \
  44                 -C lzma -a $(KERNEL_LOADADDR) -e $(if $(KERNEL_ENTRY),$(KERNEL_ENTRY),$(KERNEL_LOADADDR)) \
  45                 -n root.squashfs -d $(IMAGE_ROOTFS) $@.new
  46         cat $(IMAGE_KERNEL) > $@.$1
  47         dd if=$@.new bs=64 count=1 >> $@.$1
  48 endef
  49
  50 define Build/append-rutx-metadata
  51         echo \
  52                 '{ \
  53                         "device_code": [".*"], \
  54                         "hwver": [".*"], \
  55                         "batch": [".*"], \
  56                         "serial": [".*"], \
  57                         "supported_devices":["teltonika,rutx"] \
  58                 }' | fwtool -I - $@
  59 endef
  60
  61 define Build/copy-file
  62         cat "$(1)" > "$@"
  63 endef
  64
  65 define Build/mkmylofw_32m
  66         $(eval device_id=$(word 1,$(1)))
  67         $(eval revision=$(word 2,$(1)))
  68
  69         let \
  70                 size="$$(stat -c%s $@)" \
  71                 pad="$(subst k,* 1024,$(BLOCKSIZE))" \
  72                 pad="(pad - (size % pad)) % pad" \
  73                 newsize='size + pad'; \
  74                 $(STAGING_DIR_HOST)/bin/mkmylofw \
  75                 -B WPE72 -i 0x11f6:$(device_id):0x11f6:$(device_id) -r $(revision) \
  76                 -s 0x2000000 -p0x180000:$$newsize:al:0x80208000:"OpenWrt":$@ \
  77                 $@.new
  78         @mv $@.new $@
  79 endef
  80
  81 define Build/wac5xx-netgear-tar
  82         mkdir $@.tmp
  83         mv $@ $@.tmp/wac5xx-ubifs-root.img
  84         md5sum $@.tmp/wac5xx-ubifs-root.img > $@.tmp/wac5xx-ubifs-root.md5sum
  85         echo "WAC505 WAC510" > $@.tmp/metadata.txt
  86         echo "WAC505_V9.9.9.9" > $@.tmp/version
  87         tar -C $@.tmp/ -cf $@ .
  88         rm -rf $@.tmp
  89 endef
  90
  91 define Build/qsdk-ipq-factory-nand-askey
  92         $(TOPDIR)/scripts/mkits-qsdk-ipq-image.sh $@.its\
  93                 askey_kernel $@.$1 \
  94                 askey_fs $(IMAGE_ROOTFS) \
  95                 ubifs $@
  96         PATH=$(LINUX_DIR)/scripts/dtc:$(PATH) mkimage -f $@.its $@.new
  97         @mv $@.new $@
  98 endef
  99
 100 define Build/qsdk-ipq-app-gpt
 101         cp $@ $@.tmp 2>/dev/null || true
 102         ptgen -g -o $@.tmp -a 1 -l 1024 \
 103                         -t 0x2e -N 0:HLOS -r -p 32M \
 104                         -t 0x83 -N rootfs -r -p 128M \
 105                                 -N rootfs_data -p 512M
 106         cat $@.tmp >> $@
 107         rm $@.tmp
 108 endef
 109
 110 define Build/SenaoFW
 111         -$(STAGING_DIR_HOST)/bin/mksenaofw \
 112                 -n $(BOARD_NAME) -r $(VENDOR_ID) -p $(1) \
 113                 -c $(DATECODE) -w $(2) -x $(CW_VER) -t 0 \
 114                 -e $@ \
 115                 -o $@.new
 116         @cp $@.new $@
 117 endef
 118
 119 define Build/wrgg-image
 120         mkwrggimg -i $@ \
 121         -o $@.new \
 122         -d "$(WRGG_DEVNAME)" \
 123         -s "$(WRGG_SIGNATURE)" \
 124         -v "" -m "" -B ""
 125         mv $@.new $@
 126 endef
 127
 128 define Device/8dev_habanero-dvk
 129         $(call Device/FitImageLzma)
 130         DEVICE_VENDOR := 8devices
 131         DEVICE_MODEL := Habanero DVK
 132         IMAGE_SIZE := 30976k
 133         SOC := qcom-ipq4019
 134         IMAGE/sysupgrade.bin := append-kernel | pad-to 64k | append-rootfs | pad-rootfs | check-size | append-metadata
 135 endef
 136 TARGET_DEVICES += 8dev_habanero-dvk
 137
 138 define Device/8dev_jalapeno-common
 139         $(call Device/FitImage)
 140         $(call Device/UbiFit)
 141         BLOCKSIZE := 128k
 142         PAGESIZE := 2048
 143         SOC := qcom-ipq4018
 144 endef
 145
 146 define Device/8dev_jalapeno
 147         $(call Device/8dev_jalapeno-common)
 148         DEVICE_VENDOR := 8devices
 149         DEVICE_MODEL := Jalapeno
 150 endef
 151 TARGET_DEVICES += 8dev_jalapeno
 152
 153 define Device/alfa-network_ap120c-ac
 154         $(call Device/FitImage)
 155         $(call Device/UbiFit)
 156         DEVICE_VENDOR := ALFA Network
 157         DEVICE_MODEL := AP120C-AC
 158         SOC := qcom-ipq4018
 159         DEVICE_PACKAGES := kmod-usb-acm kmod-tpm-i2c-atmel
 160         BLOCKSIZE := 128k
 161         PAGESIZE := 2048
 162         IMAGE_SIZE := 65536k
 163         IMAGES := factory.bin sysupgrade.bin
 164         IMAGE/factory.bin := append-ubi | qsdk-ipq-factory-nand
 165 endef
 166 TARGET_DEVICES += alfa-network_ap120c-ac
 167
 168 define Device/aruba_glenmorangie
 169         $(call Device/FitImageLzma)
 170         DEVICE_VENDOR := Aruba
 171         SOC := qcom-ipq4029
 172 endef
 173
 174 define Device/aruba_ap-303
 175         $(call Device/aruba_glenmorangie)
 176         DEVICE_MODEL := AP-303
 177 endef
 178 TARGET_DEVICES += aruba_ap-303
 179
 180 define Device/aruba_ap-303h
 181         $(call Device/aruba_glenmorangie)
 182         DEVICE_MODEL := AP-303H
 183 endef
 184 TARGET_DEVICES += aruba_ap-303h
 185
 186 define Device/aruba_ap-365
 187         $(call Device/aruba_glenmorangie)
 188         DEVICE_MODEL := AP-365
 189         DEVICE_PACKAGES := kmod-hwmon-ad7418 ipq-wifi-aruba_ap-365
 190 endef
 191 # Missing DSA Setup
 192 #TARGET_DEVICES += aruba_ap-365
 193
 194 define Device/asus_map-ac2200
 195         $(call Device/FitImageLzma)
 196         DEVICE_VENDOR := ASUS
 197         DEVICE_MODEL := Lyra (MAP-AC2200)
 198         SOC := qcom-ipq4019
 199         DEVICE_PACKAGES := ath10k-firmware-qca9888-ct kmod-ath3k
 200 endef
 201 TARGET_DEVICES += asus_map-ac2200
 202
 203 # WARNING: this is an initramfs image that gets you half of the way there
 204 #          you need to delete the jffs2 ubi volume and sysupgrade to the final image
 205 # to get a "trx" you can flash via web UI for ac42u/ac58u:
 206 # - change call Device/FitImageLzma to Device/FitImage
 207 # - add the following below UIMAGE_NAME
 208 #   UIMAGE_MAGIC := 0x27051956
 209 #   IMAGES += factory.trx
 210 #   IMAGE/factory.trx := copy-file $(KDIR)/tmp/$$(KERNEL_INITRAMFS_IMAGE) | uImage none
 211 define Device/asus_rt-ac42u
 212         $(call Device/FitImageLzma)
 213         DEVICE_VENDOR := ASUS
 214         DEVICE_MODEL := RT-AC42U
 215         DEVICE_ALT0_VENDOR := ASUS
 216         DEVICE_ALT0_MODEL := RT-ACRH17
 217         DEVICE_ALT1_VENDOR := ASUS
 218         DEVICE_ALT1_MODEL := RT-AC2200
 219         SOC := qcom-ipq4019
 220         BLOCKSIZE := 128k
 221         PAGESIZE := 2048
 222         IMAGE_SIZE := 20439364
 223         FILESYSTEMS := squashfs
 224 #       RT-AC82U is nowhere to be found online
 225 #       Rather, this device is a/k/a RT-AC42U
 226 #       But we'll go with what the vendor firmware has...
 227         UIMAGE_NAME:=$(shell echo -e '\03\01\01\01RT-AC82U')
 228         DEVICE_PACKAGES := ath10k-firmware-qca9984-ct kmod-usb-ledtrig-usbport
 229 endef
 230 TARGET_DEVICES += asus_rt-ac42u
 231
 232 define Device/asus_rt-ac58u
 233         $(call Device/FitImageLzma)
 234         DEVICE_VENDOR := ASUS
 235         DEVICE_MODEL := RT-AC58U
 236         DEVICE_ALT0_VENDOR := ASUS
 237         DEVICE_ALT0_MODEL := RT-ACRH13
 238         SOC := qcom-ipq4018
 239         BLOCKSIZE := 128k
 240         PAGESIZE := 2048
 241         IMAGE_SIZE := 20439364
 242         FILESYSTEMS := squashfs
 243 #       Someone - in their infinite wisdom - decided to put the firmware
 244 #       version in front of the image name \03\00\00\04 => Version 3.0.0.4
 245 #       Since u-boot works with strings we either need another fixup step
 246 #       to add a version... or we are very careful not to add '\0' into that
 247 #       string and call it a day.... Yeah, we do the latter!
 248         UIMAGE_NAME:=$(shell echo -e '\03\01\01\01RT-AC58U')
 249         DEVICE_PACKAGES := -kmod-ath10k-ct kmod-ath10k-ct-smallbuffers \
 250                 kmod-usb-ledtrig-usbport
 251 endef
 252 TARGET_DEVICES += asus_rt-ac58u
 253
 254 define Device/avm_fritzbox-4040
 255         $(call Device/FitImageLzma)
 256         DEVICE_VENDOR := AVM
 257         DEVICE_MODEL := FRITZ!Box 4040
 258         SOC := qcom-ipq4018
 259         BOARD_NAME := fritz4040
 260         IMAGE_SIZE := 29056k
 261         UBOOT_PATH := $(STAGING_DIR_IMAGE)/uboot-fritz4040.bin
 262         UBOOT_PARTITION_SIZE := 524288
 263         IMAGES += eva.bin
 264         IMAGE/eva.bin := append-uboot | pad-to $$$$(UBOOT_PARTITION_SIZE) | append-kernel | append-rootfs | pad-rootfs
 265         IMAGE/sysupgrade.bin := append-kernel | append-rootfs | pad-rootfs | check-size | append-metadata
 266         DEVICE_PACKAGES := fritz-tffs fritz-caldata
 267 endef
 268 TARGET_DEVICES += avm_fritzbox-4040
 269
 270 define Device/avm_fritzbox-7530
 271         $(call Device/FitImageLzma)
 272         DEVICE_VENDOR := AVM
 273         DEVICE_MODEL := FRITZ!Box 7530
 274         DEVICE_ALT0_VENDOR := AVM
 275         DEVICE_ALT0_MODEL := FRITZ!Box 7520
 276         SOC := qcom-ipq4019
 277         DEVICE_PACKAGES := fritz-caldata fritz-tffs-nand ltq-vdsl-vr11-app
 278 endef
 279 TARGET_DEVICES += avm_fritzbox-7530
 280
 281 define Device/avm_fritzrepeater-1200
 282         $(call Device/FitImageLzma)
 283         DEVICE_VENDOR := AVM
 284         DEVICE_MODEL := FRITZ!Repeater 1200
 285         SOC := qcom-ipq4019
 286         DEVICE_PACKAGES := fritz-caldata fritz-tffs-nand
 287 endef
 288 TARGET_DEVICES += avm_fritzrepeater-1200
 289
 290 define Device/avm_fritzrepeater-3000
 291         $(call Device/FitImageLzma)
 292         DEVICE_VENDOR := AVM
 293         DEVICE_MODEL := FRITZ!Repeater 3000
 294         SOC := qcom-ipq4019
 295         DEVICE_PACKAGES := ath10k-firmware-qca9984-ct fritz-caldata fritz-tffs-nand
 296 endef
 297 # Missing DSA Setup
 298 #TARGET_DEVICES += avm_fritzrepeater-3000
 299
 300 define Device/buffalo_wtr-m2133hp
 301         $(call Device/FitImage)
 302         $(call Device/UbiFit)
 303         DEVICE_VENDOR := Buffalo
 304         DEVICE_MODEL := WTR-M2133HP
 305         SOC := qcom-ipq4019
 306         DEVICE_PACKAGES := ath10k-firmware-qca9984-ct
 307         BLOCKSIZE := 128k
 308         PAGESIZE := 2048
 309 endef
 310 # Missing DSA Setup
 311 #TARGET_DEVICES += buffalo_wtr-m2133hp
 312
 313 define Device/cellc_rtl30vw
 314         KERNEL_SUFFIX := -zImage.itb
 315         KERNEL_INITRAMFS = kernel-bin | gzip | fit gzip $$(KDIR)/image-$$(DEVICE_DTS).dtb
 316         KERNEL = kernel-bin | fit none $$(KDIR)/image-$$(DEVICE_DTS).dtb | uImage lzma | pad-to 2048
 317         KERNEL_NAME := zImage
 318         KERNEL_IN_UBI :=
 319         IMAGES := factory.bin sysupgrade.bin
 320         IMAGE/factory.bin := append-rootfshdr kernel | append-ubi | qsdk-ipq-factory-nand-askey kernel
 321         IMAGE/sysupgrade.bin := append-rootfshdr kernel | sysupgrade-tar kernel=$$$$@.kernel | append-metadata
 322         DEVICE_VENDOR := Cell C
 323         DEVICE_MODEL := RTL30VW
 324         SOC := qcom-ipq4019
 325         DEVICE_DTS_CONFIG := config@5
 326         KERNEL_INSTALL := 1
 327         KERNEL_SIZE := 4096k
 328         IMAGE_SIZE := 57344k
 329         BLOCKSIZE := 128k
 330         PAGESIZE := 2048
 331         DEVICE_PACKAGES := kmod-usb-net-qmi-wwan kmod-usb-serial-option uqmi
 332 endef
 333 TARGET_DEVICES += cellc_rtl30vw
 334
 335 define Device/cilab_meshpoint-one
 336         $(call Device/8dev_jalapeno-common)
 337         DEVICE_VENDOR := Crisis Innovation Lab
 338         DEVICE_MODEL := MeshPoint.One
 339         DEVICE_PACKAGES := kmod-i2c-gpio kmod-iio-bmp280-i2c kmod-hwmon-ina2xx kmod-rtc-pcf2127
 340 endef
 341 # Missing DSA Setup
 342 #TARGET_DEVICES += cilab_meshpoint-one
 343
 344 define Device/compex_wpj419
 345         $(call Device/FitImage)
 346         $(call Device/UbiFit)
 347         DEVICE_VENDOR := Compex
 348         DEVICE_MODEL := WPJ419
 349         SOC := qcom-ipq4019
 350         DEVICE_DTS_CONFIG := config@12
 351         KERNEL_INSTALL := 1
 352         BLOCKSIZE := 128k
 353         PAGESIZE := 2048
 354         FILESYSTEMS := squashfs
 355 endef
 356 # Missing DSA Setup
 357 #TARGET_DEVICES += compex_wpj419
 358
 359 define Device/compex_wpj428
 360         $(call Device/FitImage)
 361         DEVICE_VENDOR := Compex
 362         DEVICE_MODEL := WPJ428
 363         SOC := qcom-ipq4028
 364         DEVICE_DTS_CONFIG := config@4
 365         BLOCKSIZE := 64k
 366         IMAGE_SIZE := 31232k
 367         KERNEL_SIZE := 4096k
 368         IMAGES += cpximg-6a04.bin
 369         IMAGE/sysupgrade.bin := append-kernel | append-rootfs | pad-rootfs | append-metadata
 370         IMAGE/cpximg-6a04.bin := append-kernel | append-rootfs | pad-rootfs | mkmylofw_32m 0x8A2 3
 371         DEVICE_PACKAGES := kmod-gpio-beeper
 372         DEFAULT := n
 373 endef
 374 TARGET_DEVICES += compex_wpj428
 375
 376 define Device/devolo_magic-2-wifi-next
 377         $(call Device/FitImage)
 378         DEVICE_VENDOR := devolo
 379         DEVICE_MODEL := Magic 2 WiFi next
 380         SOC := qcom-ipq4018
 381         KERNEL_SIZE := 4096k
 382
 383         # If the bootloader sees 0xDEADC0DE and this trailer at the 64k boundary of a TFTP image
 384         # it will bootm it, just like we want for the initramfs.
 385         KERNEL_INITRAMFS := kernel-bin | gzip | fit gzip $$(KDIR)/image-$$(DEVICE_DTS).dtb | pad-to 64k |\
 386                 append-string -e '\xDE\xAD\xC0\xDE{"fl_initramfs":""}\x00'
 387
 388         IMAGE_SIZE := 26624k
 389         IMAGES := sysupgrade.bin
 390         IMAGE/sysupgrade.bin := append-kernel | append-rootfs | pad-rootfs | append-metadata
 391         DEVICE_PACKAGES := ipq-wifi-devolo_magic-2-wifi-next
 392         DEFAULT := n
 393 endef
 394 # Missing DSA Setup
 395 #TARGET_DEVICES += devolo_magic-2-wifi-next
 396
 397 define Device/dlink_dap-2610
 398         $(call Device/FitImageLzma)
 399         DEVICE_VENDOR := D-Link
 400         DEVICE_MODEL := DAP-2610
 401         SOC := qcom-ipq4018
 402         DEVICE_DTS_CONFIG := config@ap.dk01.1-c1
 403         BLOCKSIZE := 64k
 404         WRGG_DEVNAME := /dev/mtdblock/8
 405         WRGG_SIGNATURE := wapac30_dkbs_dap2610
 406         IMAGE_SIZE := 14080k
 407         IMAGES += factory.bin
 408         # Bootloader expects a special 160 byte header which is added by
 409         # wrgg-image.
 410         # Factory image size must be larger than 6MB, and size in wrgg header must
 411         # match actual factory image size to be flashable from D-Link http server.
 412         # Bootloader verifies checksum of wrgg image before booting, thus jffs2
 413         # cannot be part of the wrgg image. This is solved in the factory image by
 414         # having the rootfs at the end of the image (without pad-rootfs). And in
 415         # the sysupgrade image only the kernel is included in the wrgg checksum,
 416         # but this is not flashable from the D-link http server.
 417         # append-rootfs must start on an erase block boundary.
 418         IMAGE/factory.bin    := append-kernel | pad-offset 6144k 160 | append-rootfs | wrgg-image | check-size
 419         IMAGE/sysupgrade.bin := append-kernel | wrgg-image | pad-to $$$$(BLOCKSIZE) | append-rootfs | pad-rootfs | check-size | append-metadata
 420 endef
 421 TARGET_DEVICES += dlink_dap-2610
 422
 423 define Device/edgecore_ecw5211
 424         $(call Device/FitImage)
 425         $(call Device/UbiFit)
 426         DEVICE_VENDOR := Edgecore
 427         DEVICE_MODEL := ECW5211
 428         SOC := qcom-ipq4018
 429         BLOCKSIZE := 128k
 430         PAGESIZE := 2048
 431         DEVICE_DTS_CONFIG := config@ap.dk01.1-c2
 432         DEVICE_PACKAGES := kmod-tpm-i2c-atmel kmod-usb-acm
 433 endef
 434 TARGET_DEVICES += edgecore_ecw5211
 435
 436 define Device/edgecore_oap100
 437         $(call Device/FitImage)
 438         $(call Device/UbiFit)
 439         DEVICE_VENDOR := Edgecore
 440         DEVICE_MODEL := OAP100
 441         SOC := qcom-ipq4019
 442         BLOCKSIZE := 128k
 443         PAGESIZE := 2048
 444         IMAGES := sysupgrade.bin
 445         DEVICE_DTS_CONFIG := config@ap.dk07.1-c1
 446         DEVICE_PACKAGES := ipq-wifi-edgecore_oap100 kmod-usb-acm kmod-usb-net kmod-usb-net-cdc-qmi uqmi
 447 endef
 448 # Missing DSA Setup
 449 #TARGET_DEVICES += edgecore_oap100
 450
 451 define Device/engenius_eap1300
 452         $(call Device/FitImage)
 453         DEVICE_VENDOR := EnGenius
 454         DEVICE_MODEL := EAP1300
 455         DEVICE_DTS_CONFIG := config@4
 456         BOARD_NAME := eap1300
 457         SOC := qcom-ipq4018
 458         KERNEL_SIZE := 5120k
 459         IMAGE_SIZE := 25344k
 460         IMAGE/sysupgrade.bin := append-kernel | append-rootfs | pad-rootfs | append-metadata
 461 endef
 462 # Missing DSA Setup
 463 #TARGET_DEVICES += engenius_eap1300
 464
 465 define Device/engenius_eap2200
 466         $(call Device/FitImage)
 467         $(call Device/UbiFit)
 468         DEVICE_VENDOR := EnGenius
 469         DEVICE_MODEL := EAP2200
 470         SOC := qcom-ipq4019
 471         BLOCKSIZE := 128k
 472         PAGESIZE := 2048
 473         DEVICE_PACKAGES := ath10k-firmware-qca9888-ct -kmod-ath10k-ct kmod-ath10k-ct-smallbuffers
 474 endef
 475 # Missing DSA Setup
 476 #TARGET_DEVICES += engenius_eap2200
 477
 478 define Device/engenius_emd1
 479         $(call Device/FitImage)
 480         DEVICE_VENDOR := EnGenius
 481         DEVICE_MODEL := EMD1
 482         DEVICE_DTS_CONFIG := config@4
 483         SOC := qcom-ipq4018
 484         IMAGE_SIZE := 30720k
 485         IMAGES += factory.bin
 486         IMAGE/sysupgrade.bin := append-kernel | append-rootfs | pad-rootfs | append-metadata
 487         IMAGE/factory.bin := qsdk-ipq-factory-nor | check-size
 488 endef
 489 # Missing DSA Setup
 490 #TARGET_DEVICES += engenius_emd1
 491
 492 define Device/engenius_emr3500
 493         $(call Device/FitImage)
 494         DEVICE_VENDOR := EnGenius
 495         DEVICE_MODEL := EMR3500
 496         DEVICE_DTS_CONFIG := config@4
 497         SOC := qcom-ipq4018
 498         KERNEL_SIZE := 4096k
 499         IMAGE_SIZE := 30720k
 500         IMAGES += factory.bin
 501         IMAGE/sysupgrade.bin := append-kernel | append-rootfs | pad-rootfs | append-metadata
 502         IMAGE/factory.bin := qsdk-ipq-factory-nor | check-size
 503         DEFAULT := n
 504 endef
 505 # Missing DSA Setup
 506 #TARGET_DEVICES += engenius_emr3500
 507
 508 define Device/engenius_ens620ext
 509         $(call Device/FitImage)
 510         DEVICE_VENDOR := EnGenius
 511         DEVICE_MODEL := ENS620EXT
 512         SOC := qcom-ipq4018
 513         DEVICE_DTS_CONFIG := config@4
 514         BLOCKSIZE := 64k
 515         PAGESIZE := 256
 516         BOARD_NAME := ENS620EXT
 517         VENDOR_ID := 0x0101
 518         PRODUCT_ID := 0x79
 519         PRODUCT_ID_NEW := 0xA4
 520         DATECODE := 190507
 521         FW_VER := 3.1.2
 522         FW_VER_NEW := 3.5.6
 523         CW_VER := 1.8.99
 524         IMAGE_SIZE := 21312k
 525         KERNEL_SIZE := 5120k
 526         FILESYSTEMS := squashfs
 527         IMAGES += factory_30.bin factory_35.bin
 528         IMAGE/sysupgrade.bin := append-kernel | append-rootfs | pad-rootfs | check-size | append-metadata
 529         IMAGE/factory_30.bin := append-kernel | pad-to $$$$(KERNEL_SIZE) | append-rootfs | pad-rootfs | check-size | SenaoFW $$$$(PRODUCT_ID) $$$$(FW_VER)
 530         IMAGE/factory_35.bin := qsdk-ipq-factory-nor | check-size | SenaoFW $$$$(PRODUCT_ID_NEW) $$$$(FW_VER_NEW)
 531 endef
 532 # Missing DSA Setup
 533 #TARGET_DEVICES += engenius_ens620ext
 534
 535 define Device/extreme-networks_ws-ap3915i
 536         $(call Device/FitImage)
 537         DEVICE_VENDOR := Extreme Networks
 538         DEVICE_MODEL := WS-AP3915i
 539         IMAGE_SIZE := 30080k
 540         SOC := qcom-ipq4029
 541         BLOCKSIZE := 128k
 542         IMAGE/sysupgrade.bin := append-kernel | append-rootfs | pad-rootfs | check-size | append-metadata
 543         DEVICE_PACKAGES := ipq-wifi-extreme-networks_ws-ap3915i
 544 endef
 545 TARGET_DEVICES += extreme-networks_ws-ap3915i
 546
 547 define Device/ezviz_cs-w3-wd1200g-eup
 548         $(call Device/FitImage)
 549         DEVICE_VENDOR := EZVIZ
 550         DEVICE_MODEL := CS-W3-WD1200G
 551         DEVICE_VARIANT := EUP
 552         IMAGE_SIZE := 14848k
 553         KERNEL_SIZE = 6m
 554         SOC := qcom-ipq4018
 555         IMAGE/sysupgrade.bin := append-kernel | append-rootfs | pad-rootfs | \
 556                 append-metadata
 557         DEVICE_PACKAGES := -kmod-ath10k-ct kmod-ath10k-ct-smallbuffers
 558         DEVICE_COMPAT_VERSION := 2.0
 559         DEVICE_COMPAT_MESSAGE := uboot's bootcmd has to be updated (see wiki). \
 560                 Upgrade via sysupgrade mechanism is not possible.
 561 endef
 562 # Missing DSA Setup
 563 #TARGET_DEVICES += ezviz_cs-w3-wd1200g-eup
 564
 565 define Device/glinet_gl-a1300
 566         $(call Device/FitImage)
 567         $(call Device/UbiFit)
 568         DEVICE_VENDOR := GL.iNet
 569         DEVICE_MODEL := GL-A1300
 570         SOC := qcom-ipq4018
 571         DEVICE_DTS_CONFIG := config@ap.dk01.1-c2
 572         BLOCKSIZE := 128k
 573         PAGESIZE := 2048
 574         IMAGE_SIZE := 131072k
 575         DEVICE_PACKAGE := ipq-wifi-glinet_gl-a1300
 576 endef
 577 TARGET_DEVICES += glinet_gl-a1300
 578
 579 define Device/glinet_gl-ap1300
 580         $(call Device/FitImage)
 581         $(call Device/UbiFit)
 582         DEVICE_VENDOR := GL.iNet
 583         DEVICE_MODEL := GL-AP1300
 584         SOC := qcom-ipq4018
 585         DEVICE_DTS_CONFIG := config@ap.dk01.1-c2
 586         BLOCKSIZE := 128k
 587         PAGESIZE := 2048
 588         IMAGE_SIZE := 131072k
 589         KERNEL_INSTALL := 1
 590         DEVICE_PACKAGES := ipq-wifi-glinet_gl-ap1300 kmod-usb-net-qmi-wwan kmod-usb-serial-option uqmi
 591 endef
 592 # Missing DSA Setup
 593 #TARGET_DEVICES += glinet_gl-ap1300
 594
 595 define Device/glinet_gl-b1300
 596         $(call Device/FitzImage)
 597         DEVICE_VENDOR := GL.iNet
 598         DEVICE_MODEL := GL-B1300
 599         BOARD_NAME := gl-b1300
 600         SOC := qcom-ipq4029
 601         KERNEL_SIZE := 4096k
 602         IMAGE_SIZE := 26624k
 603         IMAGE/sysupgrade.bin := append-kernel |append-rootfs | pad-rootfs | append-metadata
 604 endef
 605 TARGET_DEVICES += glinet_gl-b1300
 606
 607 define Device/glinet_gl-b2200
 608         $(call Device/FitzImage)
 609         DEVICE_VENDOR := GL.iNet
 610         DEVICE_MODEL := GL-B2200
 611         SOC := qcom-ipq4019
 612         DEVICE_DTS_CONFIG := config@ap.dk04.1-c3
 613         KERNEL_INITRAMFS_SUFFIX := -recovery.itb
 614         IMAGES := emmc.img.gz sysupgrade.bin
 615         IMAGE/emmc.img.gz := qsdk-ipq-app-gpt |\
 616                 pad-to 1024k | append-kernel |\
 617                 pad-to 33792k | append-rootfs |\
 618                 append-metadata | gzip
 619         IMAGE/sysupgrade.bin := sysupgrade-tar | append-metadata
 620         DEVICE_PACKAGES := ath10k-firmware-qca9888-ct \
 621                 kmod-fs-ext4 kmod-mmc kmod-spi-dev mkf2fs e2fsprogs kmod-fs-f2fs
 622 endef
 623 TARGET_DEVICES += glinet_gl-b2200
 624
 625 define Device/glinet_gl-s1300
 626         $(call Device/FitzImage)
 627         DEVICE_VENDOR := GL.iNet
 628         DEVICE_MODEL := GL-S1300
 629         SOC := qcom-ipq4029
 630         KERNEL_SIZE := 4096k
 631         IMAGE_SIZE := 26624k
 632         IMAGES := sysupgrade.bin
 633         IMAGE/sysupgrade.bin := append-kernel | append-rootfs | pad-rootfs | append-metadata
 634         DEVICE_PACKAGES := ipq-wifi-glinet_gl-s1300 kmod-fs-ext4 kmod-mmc kmod-spi-dev
 635 endef
 636 # Missing DSA Setup
 637 #TARGET_DEVICES += glinet_gl-s1300
 638
 639 define Device/kernel-size-6350-8300
 640         DEVICE_COMPAT_VERSION := 2.0
 641         DEVICE_COMPAT_MESSAGE := Kernel partition size must be increased for \
 642         this OpenWrt version. Before continuing, you MUST issue either the \
 643         command "fw_setenv kernsize 500000" from the OpenWrt command line, \
 644         or "setenv kernsize 500000 ; saveenv" from the U-Boot serial console. \
 645         Instead of the sysupgrade image, you must then install the OpenWrt \
 646         factory image, setting the force flag and wiping the configuration. \
 647         (e.g. "sysupgrade -n -F openwrt-squashfs-factory.bin" on command line)
 648 endef
 649
 650 define Device/linksys_ea6350v3
 651         # The Linksys EA6350v3 has a uboot bootloader that does not
 652         # support either booting lzma kernel images nor booting UBI
 653         # partitions. This uboot, however, supports raw kernel images and
 654         # gzipped images.
 655         #
 656         # As configured by the OEM factory, the device will boot the kernel
 657         # from a fixed address with a fixed length of 3 MiB. Also, the
 658         # device has a hard-coded kernel command line that requires the
 659         # rootfs and alt_rootfs to be in mtd11 and mtd13 respectively.
 660         # Oh... and the kernel partition overlaps with the rootfs
 661         # partition (the same for alt_kernel and alt_rootfs).
 662         #
 663         # If you are planing re-partitioning the device, you may want to
 664         # keep these details in mind:
 665         # 1. The kernel addresses you should honor are 0x00000000 and
 666         #    0x02800000 respectively.
 667         # 2. The kernel size (plus the dtb) cannot exceed 3 MiB in size
 668         #    unless the uboot environment variable "kernsize" is increased.
 669         # 3. You can use 'zImage', but not a raw 'Image' packed with lzma.
 670         # 4. The kernel command line from uboot is harcoded to boot with
 671         #    rootfs either in mtd11 or mtd13.
 672         $(call Device/FitzImage)
 673         $(call Device/kernel-size-6350-8300)
 674         DEVICE_VENDOR := Linksys
 675         DEVICE_MODEL := EA6350
 676         DEVICE_VARIANT := v3
 677         SOC := qcom-ipq4018
 678         BLOCKSIZE := 128k
 679         PAGESIZE := 2048
 680         KERNEL_SIZE := 5120k
 681         IMAGE_SIZE := 35840k
 682         UBINIZE_OPTS := -E 5
 683         IMAGES += factory.bin
 684         IMAGE/factory.bin := append-kernel | append-uImage-fakehdr filesystem | pad-to $$$$(KERNEL_SIZE) | append-ubi | linksys-image type=EA6350v3
 685 endef
 686 TARGET_DEVICES += linksys_ea6350v3
 687
 688 define Device/linksys_ea8300
 689         $(call Device/FitzImage)
 690         $(call Device/kernel-size-6350-8300)
 691         DEVICE_VENDOR := Linksys
 692         DEVICE_MODEL := EA8300
 693         SOC := qcom-ipq4019
 694         KERNEL_SIZE := 5120k
 695         IMAGE_SIZE := 84992k
 696         BLOCKSIZE := 128k
 697         PAGESIZE := 2048
 698         UBINIZE_OPTS := -E 5    # EOD marks to "hide" factory sig at EOF
 699         IMAGES += factory.bin
 700         IMAGE/factory.bin  := append-kernel | pad-to $$$$(KERNEL_SIZE) | append-ubi | linksys-image type=EA8300
 701         DEVICE_PACKAGES := ath10k-firmware-qca9888-ct ipq-wifi-linksys_ea8300 kmod-usb-ledtrig-usbport
 702 endef
 703 TARGET_DEVICES += linksys_ea8300
 704
 705 define Device/linksys_mr8300
 706         $(call Device/FitzImage)
 707         $(call Device/kernel-size-6350-8300)
 708         DEVICE_VENDOR := Linksys
 709         DEVICE_MODEL := MR8300
 710         SOC := qcom-ipq4019
 711         KERNEL_SIZE := 5120k
 712         IMAGE_SIZE := 84992k
 713         BLOCKSIZE := 128k
 714         PAGESIZE := 2048
 715         UBINIZE_OPTS := -E 5    # EOD marks to "hide" factory sig at EOF
 716         IMAGES += factory.bin
 717         IMAGE/factory.bin  := append-kernel | pad-to $$$$(KERNEL_SIZE) | append-ubi | linksys-image type=MR8300
 718         DEVICE_PACKAGES := ath10k-firmware-qca9888-ct kmod-usb-ledtrig-usbport
 719 endef
 720 TARGET_DEVICES += linksys_mr8300
 721
 722 define Device/linksys_whw03v2
 723         $(call Device/FitzImage)
 724         DEVICE_VENDOR := Linksys
 725         DEVICE_MODEL := WHW03
 726         DEVICE_VARIANT := V2
 727         SOC := qcom-ipq4019
 728         KERNEL_SIZE := 6144k
 729         IMAGE_SIZE := 158720k
 730         BLOCKSIZE := 128k
 731         PAGESIZE := 2048
 732         UBINIZE_OPTS := -E 5    # EOD marks to "hide" factory sig at EOF
 733         IMAGES += factory.bin
 734         IMAGE/factory.bin  := append-kernel | pad-to $$$$(KERNEL_SIZE) | append-ubi | linksys-image type=WHW03v2
 735         DEVICE_PACKAGES := ath10k-firmware-qca9888-ct ipq-wifi-linksys_whw03v2 kmod-leds-pca963x kmod-spi-dev kmod-bluetooth
 736 endef
 737 TARGET_DEVICES += linksys_whw03v2
 738
 739 define Device/linksys_whw01
 740         $(call Device/FitzImage)
 741         DEVICE_VENDOR := Linksys
 742         DEVICE_MODEL := WHW01
 743         KERNEL_SIZE := 6144k
 744         IMAGE_SIZE := 75776K
 745         SOC := qcom-ipq4018
 746         BLOCKSIZE := 128k
 747         PAGESIZE := 2048
 748         UBINIZE_OPTS := -E 5    # EOD marks to "hide" factory sig at EOF
 749         IMAGES += factory.bin
 750         IMAGE/factory.bin := append-kernel | pad-to $$$$(KERNEL_SIZE) | append-ubi | linksys-image type=WHW01
 751         DEVICE_PACKAGES := uboot-envtools kmod-leds-pca963x
 752 endef
 753 TARGET_DEVICES += linksys_whw01
 754
 755 define Device/luma_wrtq-329acn
 756         $(call Device/FitImage)
 757         DEVICE_VENDOR := Luma Home
 758         DEVICE_MODEL := WRTQ-329ACN
 759         SOC := qcom-ipq4018
 760         DEVICE_PACKAGES := kmod-ath3k kmod-eeprom-at24 kmod-i2c-gpio
 761         IMAGE_SIZE := 76632k
 762         BLOCKSIZE := 128k
 763         PAGESIZE := 2048
 764 endef
 765 TARGET_DEVICES += luma_wrtq-329acn
 766
 767 define Device/meraki_mr33
 768         $(call Device/FitImage)
 769         DEVICE_VENDOR := Cisco Meraki
 770         DEVICE_MODEL := MR33
 771         SOC := qcom-ipq4029
 772         BLOCKSIZE := 128k
 773         PAGESIZE := 2048
 774         DEVICE_PACKAGES := -swconfig ath10k-firmware-qca9887-ct
 775 endef
 776 TARGET_DEVICES += meraki_mr33
 777
 778 define Device/meraki_mr74
 779         $(call Device/FitImage)
 780         DEVICE_VENDOR := Cisco Meraki
 781         DEVICE_MODEL := MR74
 782         SOC := qcom-ipq4029
 783         BLOCKSIZE := 128k
 784         PAGESIZE := 2048
 785         DEVICE_PACKAGES := -swconfig ath10k-firmware-qca9887-ct
 786         DEVICE_DTS_CONFIG := config@3
 787 endef
 788 TARGET_DEVICES += meraki_mr74
 789
 790 define Device/mobipromo_cm520-79f
 791         $(call Device/FitzImage)
 792         $(call Device/UbiFit)
 793         DEVICE_VENDOR := MobiPromo
 794         DEVICE_MODEL := CM520-79F
 795         SOC := qcom-ipq4019
 796         BLOCKSIZE := 128k
 797         PAGESIZE := 2048
 798         DEVICE_PACKAGES := kmod-usb-ledtrig-usbport
 799 endef
 800 TARGET_DEVICES += mobipromo_cm520-79f
 801
 802 define Device/netgear_ex61x0v2
 803         $(call Device/DniImage)
 804         DEVICE_VENDOR := NETGEAR
 805         DEVICE_DTS_CONFIG := config@4
 806         NETGEAR_BOARD_ID := EX6150v2series
 807         NETGEAR_HW_ID := 29765285+16+0+128+2x2
 808         IMAGE_SIZE := 14400k
 809         SOC := qcom-ipq4018
 810 endef
 811
 812 define Device/netgear_ex6100v2
 813         $(call Device/netgear_ex61x0v2)
 814         DEVICE_MODEL := EX6100
 815         DEVICE_VARIANT := v2
 816 endef
 817 # Missing DSA Setup
 818 #TARGET_DEVICES += netgear_ex6100v2
 819
 820 define Device/netgear_ex6150v2
 821         $(call Device/netgear_ex61x0v2)
 822         DEVICE_MODEL := EX6150
 823         DEVICE_VARIANT := v2
 824 endef
 825 # Missing DSA Setup
 826 #TARGET_DEVICES += netgear_ex6150v2
 827
 828 define Device/netgear_orbi
 829         $(call Device/DniImage)
 830         SOC := qcom-ipq4019
 831         DEVICE_VENDOR := NETGEAR
 832         IMAGE/factory.img := append-kernel | pad-offset 128k 64 | \
 833                 append-uImage-fakehdr filesystem | pad-to $$$$(KERNEL_SIZE) | \
 834                 append-rootfs | pad-rootfs | netgear-dni
 835         IMAGE/sysupgrade.bin/squashfs := append-rootfs | pad-to 64k | \
 836                 sysupgrade-tar rootfs=$$$$@ | append-metadata
 837         DEVICE_PACKAGES := ath10k-firmware-qca9984-ct e2fsprogs kmod-fs-ext4 losetup
 838 endef
 839
 840 define Device/netgear_rbx50
 841         $(call Device/netgear_orbi)
 842         NETGEAR_HW_ID := 29765352+0+4000+512+2x2+2x2+4x4
 843         KERNEL_SIZE := 3932160
 844         ROOTFS_SIZE := 32243712
 845         IMAGE_SIZE := 36175872
 846 endef
 847
 848 define Device/netgear_rbr50
 849         $(call Device/netgear_rbx50)
 850         DEVICE_MODEL := RBR50
 851         DEVICE_VARIANT := v1
 852         NETGEAR_BOARD_ID := RBR50
 853 endef
 854 TARGET_DEVICES += netgear_rbr50
 855
 856 define Device/netgear_rbs50
 857         $(call Device/netgear_rbx50)
 858         DEVICE_MODEL := RBS50
 859         DEVICE_VARIANT := v1
 860         NETGEAR_BOARD_ID := RBS50
 861 endef
 862 TARGET_DEVICES += netgear_rbs50
 863
 864 define Device/netgear_srx60
 865         $(call Device/netgear_orbi)
 866         NETGEAR_HW_ID := 29765352+0+4096+512+2x2+2x2+4x4
 867         KERNEL_SIZE := 3932160
 868         ROOTFS_SIZE := 32243712
 869         IMAGE_SIZE := 36175872
 870 endef
 871
 872 define Device/netgear_srr60
 873         $(call Device/netgear_srx60)
 874         DEVICE_MODEL := SRR60
 875         NETGEAR_BOARD_ID := SRR60
 876 endef
 877 TARGET_DEVICES += netgear_srr60
 878
 879 define Device/netgear_srs60
 880         $(call Device/netgear_srx60)
 881         DEVICE_MODEL := SRS60
 882         NETGEAR_BOARD_ID := SRS60
 883 endef
 884 TARGET_DEVICES += netgear_srs60
 885
 886 define Device/netgear_wac510
 887         $(call Device/FitImage)
 888         $(call Device/UbiFit)
 889         DEVICE_VENDOR := Netgear
 890         DEVICE_MODEL := WAC510
 891         SOC := qcom-ipq4018
 892         DEVICE_DTS_CONFIG := config@5
 893         BLOCKSIZE := 128k
 894         PAGESIZE := 2048
 895         IMAGES += factory.tar
 896         IMAGE/factory.tar := append-ubi | wac5xx-netgear-tar
 897         DEVICE_PACKAGES := uboot-envtools
 898 endef
 899 TARGET_DEVICES += netgear_wac510
 900
 901 define Device/openmesh_a42
 902         $(call Device/FitImageLzma)
 903         DEVICE_VENDOR := OpenMesh
 904         DEVICE_MODEL := A42
 905         SOC := qcom-ipq4018
 906         DEVICE_DTS_CONFIG := config@om.a42
 907         BLOCKSIZE := 64k
 908         KERNEL = kernel-bin | lzma | fit lzma $$(KDIR)/image-$$(DEVICE_DTS).dtb | pad-to $$(BLOCKSIZE)
 909         IMAGE_SIZE := 15616k
 910         IMAGES += factory.bin
 911         IMAGE/factory.bin := append-rootfs | pad-rootfs | openmesh-image ce_type=A42
 912         IMAGE/sysupgrade.bin/squashfs := append-rootfs | pad-rootfs | sysupgrade-tar rootfs=$$$$@ | append-metadata
 913 endef
 914 TARGET_DEVICES += openmesh_a42
 915
 916 define Device/openmesh_a62
 917         $(call Device/FitImageLzma)
 918         DEVICE_VENDOR := OpenMesh
 919         DEVICE_MODEL := A62
 920         SOC := qcom-ipq4019
 921         DEVICE_DTS_CONFIG := config@om.a62
 922         BLOCKSIZE := 64k
 923         KERNEL = kernel-bin | lzma | fit lzma $$(KDIR)/image-$$(DEVICE_DTS).dtb | pad-to $$(BLOCKSIZE)
 924         IMAGE_SIZE := 15552k
 925         IMAGES += factory.bin
 926         IMAGE/factory.bin := append-rootfs | pad-rootfs | openmesh-image ce_type=A62
 927         IMAGE/sysupgrade.bin/squashfs := append-rootfs | pad-rootfs | sysupgrade-tar rootfs=$$$$@ | append-metadata
 928         DEVICE_PACKAGES := ath10k-firmware-qca9888-ct
 929 endef
 930 TARGET_DEVICES += openmesh_a62
 931
 932 define Device/p2w_r619ac
 933         $(call Device/FitzImage)
 934         $(call Device/UbiFit)
 935         DEVICE_VENDOR := P&W
 936         DEVICE_MODEL := R619AC
 937         SOC := qcom-ipq4019
 938         DEVICE_DTS_CONFIG := config@10
 939         BLOCKSIZE := 128k
 940         PAGESIZE := 2048
 941         DEVICE_PACKAGES := ipq-wifi-p2w_r619ac
 942 endef
 943
 944 define Device/p2w_r619ac-64m
 945         $(call Device/p2w_r619ac)
 946         DEVICE_VARIANT := 64M NAND
 947         IMAGES += factory.bin
 948         IMAGE/factory.bin := append-ubi | qsdk-ipq-factory-nand
 949 endef
 950 TARGET_DEVICES += p2w_r619ac-64m
 951
 952 define Device/p2w_r619ac-128m
 953         $(call Device/p2w_r619ac)
 954         DEVICE_VARIANT := 128M NAND
 955 endef
 956 TARGET_DEVICES += p2w_r619ac-128m
 957
 958 define Device/pakedge_wr-1
 959         $(call Device/FitImageLzma)
 960         DEVICE_VENDOR := Pakedge
 961         DEVICE_MODEL := WR-1
 962         DEVICE_DTS_CONFIG := config@ap.dk01.1-c1
 963         DEVICE_PACKAGES := ipq-wifi-pakedge_wr-1
 964         SOC := qcom-ipq4018
 965         BLOCKSIZE := 64k
 966         IMAGE_SIZE := 31232k
 967         IMAGE/sysupgrade.bin := append-kernel | pad-to $$$$(BLOCKSIZE) | append-rootfs | pad-rootfs | append-metadata
 968 endef
 969 TARGET_DEVICES += pakedge_wr-1
 970
 971 define Device/plasmacloud_pa1200
 972         $(call Device/FitImageLzma)
 973         DEVICE_VENDOR := Plasma Cloud
 974         DEVICE_MODEL := PA1200
 975         SOC := qcom-ipq4018
 976         DEVICE_DTS_CONFIG := config@pc.pa1200
 977         BLOCKSIZE := 64k
 978         KERNEL = kernel-bin | lzma | fit lzma $$(KDIR)/image-$$(DEVICE_DTS).dtb | pad-to $$(BLOCKSIZE)
 979         IMAGE_SIZE := 15616k
 980         IMAGES += factory.bin
 981         IMAGE/factory.bin := append-rootfs | pad-rootfs | openmesh-image ce_type=PA1200
 982         IMAGE/sysupgrade.bin/squashfs := append-rootfs | pad-rootfs | sysupgrade-tar rootfs=$$$$@ | append-metadata
 983 endef
 984 TARGET_DEVICES += plasmacloud_pa1200
 985
 986 define Device/plasmacloud_pa2200
 987         $(call Device/FitImageLzma)
 988         DEVICE_VENDOR := Plasma Cloud
 989         DEVICE_MODEL := PA2200
 990         SOC := qcom-ipq4019
 991         DEVICE_DTS_CONFIG := config@pc.pa2200
 992         BLOCKSIZE := 64k
 993         KERNEL = kernel-bin | lzma | fit lzma $$(KDIR)/image-$$(DEVICE_DTS).dtb | pad-to $$(BLOCKSIZE)
 994         IMAGE_SIZE := 15552k
 995         IMAGES += factory.bin
 996         IMAGE/factory.bin := append-rootfs | pad-rootfs | openmesh-image ce_type=PA2200
 997         IMAGE/sysupgrade.bin/squashfs := append-rootfs | pad-rootfs | sysupgrade-tar rootfs=$$$$@ | append-metadata
 998         DEVICE_PACKAGES := ath10k-firmware-qca9888-ct
 999 endef
1000 TARGET_DEVICES += plasmacloud_pa2200
1001
1002 define Device/qcom_ap-dk01.1-c1
1003         DEVICE_VENDOR := Qualcomm Atheros
1004         DEVICE_MODEL := AP-DK01.1
1005         DEVICE_VARIANT := C1
1006         BOARD_NAME := ap-dk01.1-c1
1007         SOC := qcom-ipq4019
1008         DEVICE_DTS := qcom-ipq4019-ap.dk01.1-c1
1009         KERNEL_INSTALL := 1
1010         KERNEL_SIZE := 4096k
1011         IMAGE_SIZE := 26624k
1012         $(call Device/FitImage)
1013         IMAGE/sysupgrade.bin := append-kernel | pad-to $$$$(KERNEL_SIZE) | append-rootfs | pad-rootfs | append-metadata
1014         DEFAULT := n
1015 endef
1016 TARGET_DEVICES += qcom_ap-dk01.1-c1
1017
1018 define Device/qcom_ap-dk04.1-c1
1019         $(call Device/FitImage)
1020         $(call Device/UbiFit)
1021         DEVICE_VENDOR := Qualcomm Atheros
1022         DEVICE_MODEL := AP-DK04.1
1023         DEVICE_VARIANT := C1
1024         SOC := qcom-ipq4019
1025         DEVICE_DTS := qcom-ipq4019-ap.dk04.1-c1
1026         KERNEL_INSTALL := 1
1027         KERNEL_SIZE := 4048k
1028         BLOCKSIZE := 128k
1029         PAGESIZE := 2048
1030         BOARD_NAME := ap-dk04.1-c1
1031         DEFAULT := n
1032 endef
1033 TARGET_DEVICES += qcom_ap-dk04.1-c1
1034
1035 define Device/qxwlan_e2600ac-c1
1036         $(call Device/FitImage)
1037         DEVICE_VENDOR := Qxwlan
1038         DEVICE_MODEL := E2600AC
1039         DEVICE_VARIANT := C1
1040         BOARD_NAME := e2600ac-c1
1041         SOC := qcom-ipq4019
1042         KERNEL_SIZE := 4096k
1043         IMAGE_SIZE := 31232k
1044         IMAGE/sysupgrade.bin := append-kernel | append-rootfs | pad-rootfs | append-metadata
1045         DEVICE_PACKAGES := ipq-wifi-qxwlan_e2600ac-c1
1046         DEFAULT := n
1047 endef
1048 # Missing DSA Setup
1049 #TARGET_DEVICES += qxwlan_e2600ac-c1
1050
1051 define Device/qxwlan_e2600ac-c2
1052         $(call Device/FitImage)
1053         $(call Device/UbiFit)
1054         DEVICE_VENDOR := Qxwlan
1055         DEVICE_MODEL := E2600AC
1056         DEVICE_VARIANT := C2
1057         SOC := qcom-ipq4019
1058         KERNEL_INSTALL := 1
1059         BLOCKSIZE := 128k
1060         PAGESIZE := 2048
1061         DEVICE_PACKAGES := ipq-wifi-qxwlan_e2600ac-c2
1062 endef
1063 # Missing DSA Setup
1064 #TARGET_DEVICES += qxwlan_e2600ac-c2
1065
1066 define Device/sony_ncp-hg100-cellular
1067         $(call Device/FitImage)
1068         DEVICE_VENDOR := Sony
1069         DEVICE_MODEL := NCP-HG100/Cellular
1070         DEVICE_DTS_CONFIG := config@ap.dk04.1-c4
1071         SOC := qcom-ipq4019
1072         KERNEL_SIZE := 8192k
1073         IMAGE_SIZE := 128m
1074         DEVICE_PACKAGES := e2fsprogs ipq-wifi-sony_ncp-hg100-cellular \
1075                 kmod-fs-ext4 uqmi
1076 endef
1077 TARGET_DEVICES += sony_ncp-hg100-cellular
1078
1079 define Device/teltonika_rutx10
1080         $(call Device/FitImage)
1081         $(call Device/UbiFit)
1082         DEVICE_VENDOR := Teltonika
1083         DEVICE_MODEL := RUTX10
1084         SOC := qcom-ipq4018
1085         DEVICE_DTS_CONFIG := config@5
1086         KERNEL_INSTALL := 1
1087         BLOCKSIZE := 128k
1088         PAGESIZE := 2048
1089         FILESYSTEMS := squashfs
1090         IMAGE/factory.ubi := append-ubi | qsdk-ipq-factory-nand | append-rutx-metadata
1091         DEVICE_PACKAGES := ipq-wifi-teltonika_rutx kmod-bluetooth
1092 endef
1093 # Missing DSA Setup
1094 #TARGET_DEVICES += teltonika_rutx10
1095
1096 define Device/tel_x1pro
1097         $(call Device/FitImage)
1098         DEVICE_VENDOR := Telco
1099         DEVICE_MODEL := X1 Pro
1100         SOC := qcom-ipq4019
1101         KERNEL_SIZE := 4096k
1102         IMAGE_SIZE := 31232k
1103         IMAGE/sysupgrade.bin := append-kernel | append-rootfs | pad-rootfs | append-metadata
1104         DEVICE_PACKAGES := kmod-usb-net-qmi-wwan kmod-usb-serial-option uqmi
1105         DEFAULT := n
1106 endef
1107 # Missing DSA Setup
1108 #TARGET_DEVICES += tel_x1pro
1109
1110 define Device/unielec_u4019-32m
1111         $(call Device/FitImage)
1112         DEVICE_VENDOR := Unielec
1113         DEVICE_MODEL := U4019
1114         DEVICE_VARIANT := 32M
1115         BOARD_NAME := u4019-32m
1116         SOC := qcom-ipq4019
1117         KERNEL_SIZE := 4096k
1118         IMAGE_SIZE := 31232k
1119         IMAGE/sysupgrade.bin := append-kernel | append-rootfs | pad-rootfs | append-metadata
1120         DEFAULT := n
1121 endef
1122 # Missing DSA Setup
1123 #TARGET_DEVICES += unielec_u4019-32m
1124
1125 define Device/zte_mf18a
1126         $(call Device/FitImage)
1127         DEVICE_VENDOR := ZTE
1128         DEVICE_MODEL := MF18A
1129         SOC := qcom-ipq4019
1130         DEVICE_DTS_CONFIG := config@ap.dk04.1-c1
1131         BLOCKSIZE := 128k
1132         PAGESIZE := 2048
1133         KERNEL_IN_UBI := 1
1134         DEVICE_PACKAGES := ath10k-firmware-qca99x0-ct ipq-wifi-zte_mf18a
1135 endef
1136 TARGET_DEVICES += zte_mf18a
1137
1138 define Device/zte_mf28x_common
1139         $(call Device/FitzImage)
1140         DEVICE_VENDOR := ZTE
1141         SOC := qcom-ipq4019
1142         DEVICE_DTS_CONFIG := config@ap.dk04.1-c1
1143         BLOCKSIZE := 128k
1144         PAGESIZE := 2048
1145         KERNEL_IN_UBI := 1
1146         DEVICE_PACKAGES := kmod-usb-net-qmi-wwan kmod-usb-serial-option uqmi
1147 endef
1148
1149 define Device/zte_mf286d
1150         $(call Device/zte_mf28x_common)
1151         DEVICE_MODEL := MF286D
1152 endef
1153 TARGET_DEVICES += zte_mf286d
1154
1155 define Device/zte_mf289f
1156         $(call Device/zte_mf28x_common)
1157         DEVICE_MODEL := MF289F
1158         DEVICE_PACKAGES += ipq-wifi-zte_mf289f ath10k-firmware-qca9984-ct
1159 endef
1160 TARGET_DEVICES += zte_mf289f
1161
1162 define Device/zyxel_nbg6617
1163         $(call Device/FitImageLzma)
1164         DEVICE_VENDOR := ZyXEL
1165         DEVICE_MODEL := NBG6617
1166         SOC := qcom-ipq4018
1167         KERNEL_SIZE := 4096k
1168         ROOTFS_SIZE := 24960k
1169         RAS_BOARD := NBG6617
1170         RAS_ROOTFS_SIZE := 19840k
1171         RAS_VERSION := "$(VERSION_DIST) $(REVISION)"
1172         IMAGE/sysupgrade.bin := append-kernel | append-rootfs | pad-rootfs | append-metadata
1173         IMAGES += factory.bin
1174 #       The ZyXEL firmware allows flashing thru the web-gui only when the rootfs is
1175 #       at least as large as the one of the initial firmware image (not the current
1176 #       one on the device). This only applies to the Web-UI, the bootlaoder ignores
1177 #       this minimum-size. However, the larger image can be flashed both ways.
1178         IMAGE/factory.bin := append-rootfs | pad-rootfs | pad-to 64k | check-size $$$$(ROOTFS_SIZE) | zyxel-ras-image separate-kernel
1179         IMAGE/sysupgrade.bin/squashfs := append-rootfs | pad-rootfs | check-size $$$$(ROOTFS_SIZE) | sysupgrade-tar rootfs=$$$$@ | append-metadata
1180         DEVICE_PACKAGES := kmod-usb-ledtrig-usbport
1181 endef
1182 TARGET_DEVICES += zyxel_nbg6617
1183
1184 define Device/zyxel_wre6606
1185         $(call Device/FitImage)
1186         DEVICE_VENDOR := ZyXEL
1187         DEVICE_MODEL := WRE6606
1188         DEVICE_DTS_CONFIG := config@4
1189         SOC := qcom-ipq4018
1190         IMAGE_SIZE := 13184k
1191         IMAGE/sysupgrade.bin := append-kernel | append-rootfs | pad-rootfs | check-size | append-metadata
1192         DEVICE_PACKAGES := -kmod-ath10k-ct kmod-ath10k-ct-smallbuffers
1193 endef
1194 # Missing DSA Setup
1195 #TARGET_DEVICES += zyxel_wre6606