target/linux/ipq40xx/image/generic.mk

   1
   2 DEVICE_VARS += NETGEAR_BOARD_ID NETGEAR_HW_ID
   3 DEVICE_VARS += RAS_BOARD RAS_ROOTFS_SIZE RAS_VERSION
   4 DEVICE_VARS += WRGG_DEVNAME WRGG_SIGNATURE
   5
   6 define Device/FitImage
   7         KERNEL_SUFFIX := -uImage.itb
   8         KERNEL = kernel-bin | gzip | fit gzip $$(KDIR)/image-$$(DEVICE_DTS).dtb
   9         KERNEL_NAME := Image
  10 endef
  11
  12 define Device/FitImageLzma
  13         KERNEL_SUFFIX := -uImage.itb
  14         KERNEL = kernel-bin | lzma | fit lzma $$(KDIR)/image-$$(DEVICE_DTS).dtb
  15         KERNEL_NAME := Image
  16 endef
  17
  18 define Device/FitzImage
  19         KERNEL_SUFFIX := -zImage.itb
  20         KERNEL = kernel-bin | fit none $$(KDIR)/image-$$(DEVICE_DTS).dtb
  21         KERNEL_NAME := zImage
  22 endef
  23
  24 define Device/UbiFit
  25         KERNEL_IN_UBI := 1
  26         IMAGES := factory.ubi sysupgrade.bin
  27         IMAGE/factory.ubi := append-ubi
  28         IMAGE/sysupgrade.bin := sysupgrade-tar | append-metadata
  29 endef
  30
  31 define Device/DniImage
  32         $(call Device/FitzImage)
  33         NETGEAR_BOARD_ID :=
  34         NETGEAR_HW_ID :=
  35         IMAGES += factory.img
  36         IMAGE/factory.img := append-kernel | pad-offset 64k 64 | append-uImage-fakehdr filesystem | append-rootfs | pad-rootfs | netgear-dni
  37         IMAGE/sysupgrade.bin := append-kernel | pad-offset 64k 64 | append-uImage-fakehdr filesystem | \
  38                 append-rootfs | pad-rootfs | check-size | append-metadata
  39 endef
  40
  41 define Build/append-rootfshdr
  42         mkimage -A $(LINUX_KARCH) \
  43                 -O linux -T filesystem \
  44                 -C lzma -a $(KERNEL_LOADADDR) -e $(if $(KERNEL_ENTRY),$(KERNEL_ENTRY),$(KERNEL_LOADADDR)) \
  45                 -n root.squashfs -d $(IMAGE_ROOTFS) $@.new
  46         cat $(IMAGE_KERNEL) > $@.$1
  47         dd if=$@.new bs=64 count=1 >> $@.$1
  48 endef
  49
  50 define Build/append-rutx-metadata
  51         echo \
  52                 '{ \
  53                         "device_code": [".*"], \
  54                         "hwver": [".*"], \
  55                         "batch": [".*"], \
  56                         "serial": [".*"], \
  57                         "supported_devices":["teltonika,rutx"] \
  58                 }' | fwtool -I - $@
  59 endef
  60
  61 define Build/copy-file
  62         cat "$(1)" > "$@"
  63 endef
  64
  65 define Build/mkmylofw_32m
  66         $(eval device_id=$(word 1,$(1)))
  67         $(eval revision=$(word 2,$(1)))
  68
  69         let \
  70                 size="$$(stat -c%s $@)" \
  71                 pad="$(subst k,* 1024,$(BLOCKSIZE))" \
  72                 pad="(pad - (size % pad)) % pad" \
  73                 newsize='size + pad'; \
  74                 $(STAGING_DIR_HOST)/bin/mkmylofw \
  75                 -B WPE72 -i 0x11f6:$(device_id):0x11f6:$(device_id) -r $(revision) \
  76                 -s 0x2000000 -p0x180000:$$newsize:al:0x80208000:"OpenWrt":$@ \
  77                 $@.new
  78         @mv $@.new $@
  79 endef
  80
  81 define Build/wac5xx-netgear-tar
  82         mkdir $@.tmp
  83         mv $@ $@.tmp/wac5xx-ubifs-root.img
  84         md5sum $@.tmp/wac5xx-ubifs-root.img > $@.tmp/wac5xx-ubifs-root.md5sum
  85         echo "WAC505 WAC510" > $@.tmp/metadata.txt
  86         echo "WAC505_V9.9.9.9" > $@.tmp/version
  87         tar -C $@.tmp/ -cf $@ .
  88         rm -rf $@.tmp
  89 endef
  90
  91 define Build/qsdk-ipq-factory-nand-askey
  92         $(TOPDIR)/scripts/mkits-qsdk-ipq-image.sh $@.its\
  93                 askey_kernel $@.$1 \
  94                 askey_fs $(IMAGE_ROOTFS) \
  95                 ubifs $@
  96         PATH=$(LINUX_DIR)/scripts/dtc:$(PATH) mkimage -f $@.its $@.new
  97         @mv $@.new $@
  98 endef
  99
 100 define Build/qsdk-ipq-app-gpt
 101         cp $@ $@.tmp 2>/dev/null || true
 102         ptgen -g -o $@.tmp -a 1 -l 1024 \
 103                         -t 0x2e -N 0:HLOS -r -p 32M \
 104                         -t 0x83 -N rootfs -r -p 128M \
 105                                 -N rootfs_data -p 512M
 106         cat $@.tmp >> $@
 107         rm $@.tmp
 108 endef
 109
 110 define Build/SenaoFW
 111         -$(STAGING_DIR_HOST)/bin/mksenaofw \
 112                 -n $(BOARD_NAME) -r $(VENDOR_ID) -p $(1) \
 113                 -c $(DATECODE) -w $(2) -x $(CW_VER) -t 0 \
 114                 -e $@ \
 115                 -o $@.new
 116         @cp $@.new $@
 117 endef
 118
 119 define Build/wrgg-image
 120         mkwrggimg -i $@ \
 121         -o $@.new \
 122         -d "$(WRGG_DEVNAME)" \
 123         -s "$(WRGG_SIGNATURE)" \
 124         -v "" -m "" -B ""
 125         mv $@.new $@
 126 endef
 127
 128 define Device/8dev_habanero-dvk
 129         $(call Device/FitImageLzma)
 130         DEVICE_VENDOR := 8devices
 131         DEVICE_MODEL := Habanero DVK
 132         IMAGE_SIZE := 30976k
 133         SOC := qcom-ipq4019
 134         IMAGE/sysupgrade.bin := append-kernel | pad-to 64k | append-rootfs | pad-rootfs | check-size | append-metadata
 135         DEVICE_PACKAGES := ipq-wifi-8dev_habanero
 136 endef
 137 TARGET_DEVICES += 8dev_habanero-dvk
 138
 139 define Device/8dev_jalapeno-common
 140         $(call Device/FitImage)
 141         $(call Device/UbiFit)
 142         BLOCKSIZE := 128k
 143         PAGESIZE := 2048
 144         SOC := qcom-ipq4018
 145         DEVICE_PACKAGES := ipq-wifi-8dev_jalapeno
 146 endef
 147
 148 define Device/8dev_jalapeno
 149         $(call Device/8dev_jalapeno-common)
 150         DEVICE_VENDOR := 8devices
 151         DEVICE_MODEL := Jalapeno
 152 endef
 153 TARGET_DEVICES += 8dev_jalapeno
 154
 155 define Device/alfa-network_ap120c-ac
 156         $(call Device/FitImage)
 157         $(call Device/UbiFit)
 158         DEVICE_VENDOR := ALFA Network
 159         DEVICE_MODEL := AP120C-AC
 160         SOC := qcom-ipq4018
 161         DEVICE_PACKAGES := kmod-usb-acm kmod-tpm-i2c-atmel
 162         BLOCKSIZE := 128k
 163         PAGESIZE := 2048
 164         IMAGE_SIZE := 65536k
 165         IMAGES := factory.bin sysupgrade.bin
 166         IMAGE/factory.bin := append-ubi | qsdk-ipq-factory-nand
 167 endef
 168 TARGET_DEVICES += alfa-network_ap120c-ac
 169
 170 define Device/aruba_glenmorangie
 171         $(call Device/FitImageLzma)
 172         DEVICE_VENDOR := Aruba
 173         SOC := qcom-ipq4029
 174 endef
 175
 176 define Device/aruba_ap-303
 177         $(call Device/aruba_glenmorangie)
 178         DEVICE_MODEL := AP-303
 179 endef
 180 TARGET_DEVICES += aruba_ap-303
 181
 182 define Device/aruba_ap-303h
 183         $(call Device/aruba_glenmorangie)
 184         DEVICE_MODEL := AP-303H
 185 endef
 186 TARGET_DEVICES += aruba_ap-303h
 187
 188 define Device/aruba_ap-365
 189         $(call Device/aruba_glenmorangie)
 190         DEVICE_MODEL := AP-365
 191         DEVICE_PACKAGES := kmod-hwmon-ad7418 ipq-wifi-aruba_ap-365
 192 endef
 193 TARGET_DEVICES += aruba_ap-365
 194
 195 define Device/asus_map-ac2200
 196         $(call Device/FitImageLzma)
 197         DEVICE_VENDOR := ASUS
 198         DEVICE_MODEL := Lyra (MAP-AC2200)
 199         SOC := qcom-ipq4019
 200         DEVICE_PACKAGES := ath10k-firmware-qca9888-ct kmod-ath3k
 201 endef
 202 TARGET_DEVICES += asus_map-ac2200
 203
 204 # WARNING: this is an initramfs image that gets you half of the way there
 205 #          you need to delete the jffs2 ubi volume and sysupgrade to the final image
 206 # to get a "trx" you can flash via web UI for ac42u/ac58u:
 207 # - change call Device/FitImageLzma to Device/FitImage
 208 # - add the following below UIMAGE_NAME
 209 #   UIMAGE_MAGIC := 0x27051956
 210 #   IMAGES += factory.trx
 211 #   IMAGE/factory.trx := copy-file $(KDIR)/tmp/$$(KERNEL_INITRAMFS_IMAGE) | uImage none
 212 define Device/asus_rt-ac42u
 213         $(call Device/FitImageLzma)
 214         DEVICE_VENDOR := ASUS
 215         DEVICE_MODEL := RT-AC42U
 216         DEVICE_ALT0_VENDOR := ASUS
 217         DEVICE_ALT0_MODEL := RT-ACRH17
 218         DEVICE_ALT1_VENDOR := ASUS
 219         DEVICE_ALT1_MODEL := RT-AC2200
 220         SOC := qcom-ipq4019
 221         BLOCKSIZE := 128k
 222         PAGESIZE := 2048
 223         IMAGE_SIZE := 20439364
 224         FILESYSTEMS := squashfs
 225 #       RT-AC82U is nowhere to be found online
 226 #       Rather, this device is a/k/a RT-AC42U
 227 #       But we'll go with what the vendor firmware has...
 228         UIMAGE_NAME:=$(shell echo -e '\03\01\01\01RT-AC82U')
 229         DEVICE_PACKAGES := ath10k-firmware-qca9984-ct kmod-usb-ledtrig-usbport
 230 endef
 231 TARGET_DEVICES += asus_rt-ac42u
 232
 233 define Device/asus_rt-ac58u
 234         $(call Device/FitImageLzma)
 235         DEVICE_VENDOR := ASUS
 236         DEVICE_MODEL := RT-AC58U
 237         DEVICE_ALT0_VENDOR := ASUS
 238         DEVICE_ALT0_MODEL := RT-ACRH13
 239         SOC := qcom-ipq4018
 240         BLOCKSIZE := 128k
 241         PAGESIZE := 2048
 242         IMAGE_SIZE := 20439364
 243         FILESYSTEMS := squashfs
 244 #       Someone - in their infinite wisdom - decided to put the firmware
 245 #       version in front of the image name \03\00\00\04 => Version 3.0.0.4
 246 #       Since u-boot works with strings we either need another fixup step
 247 #       to add a version... or we are very careful not to add '\0' into that
 248 #       string and call it a day.... Yeah, we do the latter!
 249         UIMAGE_NAME:=$(shell echo -e '\03\01\01\01RT-AC58U')
 250         DEVICE_PACKAGES := -kmod-ath10k-ct kmod-ath10k-ct-smallbuffers \
 251                 kmod-usb-ledtrig-usbport
 252 endef
 253 TARGET_DEVICES += asus_rt-ac58u
 254
 255 define Device/avm_fritzbox-4040
 256         $(call Device/FitImageLzma)
 257         DEVICE_VENDOR := AVM
 258         DEVICE_MODEL := FRITZ!Box 4040
 259         SOC := qcom-ipq4018
 260         BOARD_NAME := fritz4040
 261         IMAGE_SIZE := 29056k
 262         UBOOT_PATH := $(STAGING_DIR_IMAGE)/uboot-fritz4040.bin
 263         UBOOT_PARTITION_SIZE := 524288
 264         IMAGES += eva.bin
 265         IMAGE/eva.bin := append-uboot | pad-to $$$$(UBOOT_PARTITION_SIZE) | append-kernel | append-rootfs | pad-rootfs
 266         IMAGE/sysupgrade.bin := append-kernel | append-rootfs | pad-rootfs | check-size | append-metadata
 267         DEVICE_PACKAGES := fritz-tffs fritz-caldata
 268 endef
 269 TARGET_DEVICES += avm_fritzbox-4040
 270
 271 define Device/avm_fritzbox-7530
 272         $(call Device/FitImageLzma)
 273         DEVICE_VENDOR := AVM
 274         DEVICE_MODEL := FRITZ!Box 7530
 275         DEVICE_ALT0_VENDOR := AVM
 276         DEVICE_ALT0_MODEL := FRITZ!Box 7520
 277         SOC := qcom-ipq4019
 278         DEVICE_PACKAGES := fritz-caldata fritz-tffs-nand ltq-vdsl-vr11-app
 279 endef
 280 TARGET_DEVICES += avm_fritzbox-7530
 281
 282 define Device/avm_fritzrepeater-1200
 283         $(call Device/FitImageLzma)
 284         DEVICE_VENDOR := AVM
 285         DEVICE_MODEL := FRITZ!Repeater 1200
 286         SOC := qcom-ipq4019
 287         DEVICE_PACKAGES := fritz-caldata fritz-tffs-nand
 288 endef
 289 TARGET_DEVICES += avm_fritzrepeater-1200
 290
 291 define Device/avm_fritzrepeater-3000
 292         $(call Device/FitImageLzma)
 293         DEVICE_VENDOR := AVM
 294         DEVICE_MODEL := FRITZ!Repeater 3000
 295         SOC := qcom-ipq4019
 296         DEVICE_PACKAGES := ath10k-firmware-qca9984-ct fritz-caldata fritz-tffs-nand
 297 endef
 298 # Missing DSA Setup
 299 #TARGET_DEVICES += avm_fritzrepeater-3000
 300
 301 define Device/buffalo_wtr-m2133hp
 302         $(call Device/FitImage)
 303         $(call Device/UbiFit)
 304         DEVICE_VENDOR := Buffalo
 305         DEVICE_MODEL := WTR-M2133HP
 306         SOC := qcom-ipq4019
 307         DEVICE_PACKAGES := ath10k-firmware-qca9984-ct
 308         BLOCKSIZE := 128k
 309         PAGESIZE := 2048
 310 endef
 311 # Missing DSA Setup
 312 #TARGET_DEVICES += buffalo_wtr-m2133hp
 313
 314 define Device/cellc_rtl30vw
 315         KERNEL_SUFFIX := -zImage.itb
 316         KERNEL_INITRAMFS = kernel-bin | gzip | fit gzip $$(KDIR)/image-$$(DEVICE_DTS).dtb
 317         KERNEL = kernel-bin | fit none $$(KDIR)/image-$$(DEVICE_DTS).dtb | uImage lzma | pad-to 2048
 318         KERNEL_NAME := zImage
 319         KERNEL_IN_UBI :=
 320         IMAGES := factory.bin sysupgrade.bin
 321         IMAGE/factory.bin := append-rootfshdr kernel | append-ubi | qsdk-ipq-factory-nand-askey kernel
 322         IMAGE/sysupgrade.bin := append-rootfshdr kernel | sysupgrade-tar kernel=$$$$@.kernel | append-metadata
 323         DEVICE_VENDOR := Cell C
 324         DEVICE_MODEL := RTL30VW
 325         SOC := qcom-ipq4019
 326         DEVICE_DTS_CONFIG := config@5
 327         KERNEL_INSTALL := 1
 328         KERNEL_SIZE := 4096k
 329         IMAGE_SIZE := 57344k
 330         BLOCKSIZE := 128k
 331         PAGESIZE := 2048
 332         DEVICE_PACKAGES := kmod-usb-net-qmi-wwan kmod-usb-serial-option uqmi
 333 endef
 334 TARGET_DEVICES += cellc_rtl30vw
 335
 336 define Device/cilab_meshpoint-one
 337         $(call Device/8dev_jalapeno-common)
 338         DEVICE_VENDOR := Crisis Innovation Lab
 339         DEVICE_MODEL := MeshPoint.One
 340         DEVICE_PACKAGES += kmod-i2c-gpio kmod-iio-bmp280-i2c kmod-hwmon-ina2xx kmod-rtc-pcf2127
 341 endef
 342 # Missing DSA Setup
 343 #TARGET_DEVICES += cilab_meshpoint-one
 344
 345 define Device/compex_wpj419
 346         $(call Device/FitImage)
 347         $(call Device/UbiFit)
 348         DEVICE_VENDOR := Compex
 349         DEVICE_MODEL := WPJ419
 350         SOC := qcom-ipq4019
 351         DEVICE_DTS_CONFIG := config@12
 352         KERNEL_INSTALL := 1
 353         BLOCKSIZE := 128k
 354         PAGESIZE := 2048
 355         FILESYSTEMS := squashfs
 356 endef
 357 # Missing DSA Setup
 358 #TARGET_DEVICES += compex_wpj419
 359
 360 define Device/compex_wpj428
 361         $(call Device/FitImage)
 362         DEVICE_VENDOR := Compex
 363         DEVICE_MODEL := WPJ428
 364         SOC := qcom-ipq4028
 365         DEVICE_DTS_CONFIG := config@4
 366         BLOCKSIZE := 64k
 367         IMAGE_SIZE := 31232k
 368         KERNEL_SIZE := 4096k
 369         IMAGES += cpximg-6a04.bin
 370         IMAGE/sysupgrade.bin := append-kernel | append-rootfs | pad-rootfs | append-metadata
 371         IMAGE/cpximg-6a04.bin := append-kernel | append-rootfs | pad-rootfs | mkmylofw_32m 0x8A2 3
 372         DEVICE_PACKAGES := kmod-gpio-beeper
 373         DEFAULT := n
 374 endef
 375 TARGET_DEVICES += compex_wpj428
 376
 377 define Device/devolo_magic-2-wifi-next
 378         $(call Device/FitImage)
 379         DEVICE_VENDOR := devolo
 380         DEVICE_MODEL := Magic 2 WiFi next
 381         SOC := qcom-ipq4018
 382         KERNEL_SIZE := 4096k
 383
 384         # If the bootloader sees 0xDEADC0DE and this trailer at the 64k boundary of a TFTP image
 385         # it will bootm it, just like we want for the initramfs.
 386         KERNEL_INITRAMFS := kernel-bin | gzip | fit gzip $$(KDIR)/image-$$(DEVICE_DTS).dtb | pad-to 64k |\
 387                 append-string -e '\xDE\xAD\xC0\xDE{"fl_initramfs":""}\x00'
 388
 389         IMAGE_SIZE := 26624k
 390         IMAGES := sysupgrade.bin
 391         IMAGE/sysupgrade.bin := append-kernel | append-rootfs | pad-rootfs | append-metadata
 392         DEVICE_PACKAGES := ipq-wifi-devolo_magic-2-wifi-next
 393         DEFAULT := n
 394 endef
 395 # Missing DSA Setup
 396 #TARGET_DEVICES += devolo_magic-2-wifi-next
 397
 398 define Device/dlink_dap-2610
 399         $(call Device/FitImageLzma)
 400         DEVICE_VENDOR := D-Link
 401         DEVICE_MODEL := DAP-2610
 402         SOC := qcom-ipq4018
 403         DEVICE_DTS_CONFIG := config@ap.dk01.1-c1
 404         BLOCKSIZE := 64k
 405         WRGG_DEVNAME := /dev/mtdblock/8
 406         WRGG_SIGNATURE := wapac30_dkbs_dap2610
 407         IMAGE_SIZE := 14080k
 408         IMAGES += factory.bin
 409         # Bootloader expects a special 160 byte header which is added by
 410         # wrgg-image.
 411         # Factory image size must be larger than 6MB, and size in wrgg header must
 412         # match actual factory image size to be flashable from D-Link http server.
 413         # Bootloader verifies checksum of wrgg image before booting, thus jffs2
 414         # cannot be part of the wrgg image. This is solved in the factory image by
 415         # having the rootfs at the end of the image (without pad-rootfs). And in
 416         # the sysupgrade image only the kernel is included in the wrgg checksum,
 417         # but this is not flashable from the D-link http server.
 418         # append-rootfs must start on an erase block boundary.
 419         IMAGE/factory.bin    := append-kernel | pad-offset 6144k 160 | append-rootfs | wrgg-image | check-size
 420         IMAGE/sysupgrade.bin := append-kernel | wrgg-image | pad-to $$$$(BLOCKSIZE) | append-rootfs | pad-rootfs | check-size | append-metadata
 421 endef
 422 TARGET_DEVICES += dlink_dap-2610
 423
 424 define Device/edgecore_ecw5211
 425         $(call Device/FitImage)
 426         $(call Device/UbiFit)
 427         DEVICE_VENDOR := Edgecore
 428         DEVICE_MODEL := ECW5211
 429         SOC := qcom-ipq4018
 430         BLOCKSIZE := 128k
 431         PAGESIZE := 2048
 432         DEVICE_DTS_CONFIG := config@ap.dk01.1-c2
 433         DEVICE_PACKAGES := kmod-tpm-i2c-atmel kmod-usb-acm
 434 endef
 435 TARGET_DEVICES += edgecore_ecw5211
 436
 437 define Device/edgecore_oap100
 438         $(call Device/FitImage)
 439         $(call Device/UbiFit)
 440         DEVICE_VENDOR := Edgecore
 441         DEVICE_MODEL := OAP100
 442         SOC := qcom-ipq4019
 443         BLOCKSIZE := 128k
 444         PAGESIZE := 2048
 445         IMAGES := sysupgrade.bin
 446         DEVICE_DTS_CONFIG := config@ap.dk07.1-c1
 447         DEVICE_PACKAGES := ipq-wifi-edgecore_oap100 kmod-usb-acm kmod-usb-net kmod-usb-net-cdc-qmi uqmi
 448 endef
 449 # Missing DSA Setup
 450 #TARGET_DEVICES += edgecore_oap100
 451
 452 define Device/engenius_eap1300
 453         $(call Device/FitImage)
 454         DEVICE_VENDOR := EnGenius
 455         DEVICE_MODEL := EAP1300
 456         DEVICE_DTS_CONFIG := config@4
 457         BOARD_NAME := eap1300
 458         SOC := qcom-ipq4018
 459         KERNEL_SIZE := 5120k
 460         IMAGE_SIZE := 25344k
 461         IMAGE/sysupgrade.bin := append-kernel | append-rootfs | pad-rootfs | append-metadata
 462 endef
 463 # Missing DSA Setup
 464 #TARGET_DEVICES += engenius_eap1300
 465
 466 define Device/engenius_eap2200
 467         $(call Device/FitImage)
 468         $(call Device/UbiFit)
 469         DEVICE_VENDOR := EnGenius
 470         DEVICE_MODEL := EAP2200
 471         SOC := qcom-ipq4019
 472         BLOCKSIZE := 128k
 473         PAGESIZE := 2048
 474         DEVICE_PACKAGES := ath10k-firmware-qca9888-ct -kmod-ath10k-ct kmod-ath10k-ct-smallbuffers
 475 endef
 476 # Missing DSA Setup
 477 #TARGET_DEVICES += engenius_eap2200
 478
 479 define Device/engenius_emd1
 480         $(call Device/FitImage)
 481         DEVICE_VENDOR := EnGenius
 482         DEVICE_MODEL := EMD1
 483         DEVICE_DTS_CONFIG := config@4
 484         SOC := qcom-ipq4018
 485         IMAGE_SIZE := 30720k
 486         IMAGES += factory.bin
 487         IMAGE/sysupgrade.bin := append-kernel | append-rootfs | pad-rootfs | append-metadata
 488         IMAGE/factory.bin := qsdk-ipq-factory-nor | check-size
 489 endef
 490 # Missing DSA Setup
 491 #TARGET_DEVICES += engenius_emd1
 492
 493 define Device/engenius_emr3500
 494         $(call Device/FitImage)
 495         DEVICE_VENDOR := EnGenius
 496         DEVICE_MODEL := EMR3500
 497         DEVICE_DTS_CONFIG := config@4
 498         SOC := qcom-ipq4018
 499         KERNEL_SIZE := 4096k
 500         IMAGE_SIZE := 30720k
 501         IMAGES += factory.bin
 502         IMAGE/sysupgrade.bin := append-kernel | append-rootfs | pad-rootfs | append-metadata
 503         IMAGE/factory.bin := qsdk-ipq-factory-nor | check-size
 504         DEFAULT := n
 505 endef
 506 # Missing DSA Setup
 507 #TARGET_DEVICES += engenius_emr3500
 508
 509 define Device/engenius_ens620ext
 510         $(call Device/FitImage)
 511         DEVICE_VENDOR := EnGenius
 512         DEVICE_MODEL := ENS620EXT
 513         SOC := qcom-ipq4018
 514         DEVICE_DTS_CONFIG := config@4
 515         BLOCKSIZE := 64k
 516         PAGESIZE := 256
 517         BOARD_NAME := ENS620EXT
 518         VENDOR_ID := 0x0101
 519         PRODUCT_ID := 0x79
 520         PRODUCT_ID_NEW := 0xA4
 521         DATECODE := 190507
 522         FW_VER := 3.1.2
 523         FW_VER_NEW := 3.5.6
 524         CW_VER := 1.8.99
 525         IMAGE_SIZE := 21312k
 526         KERNEL_SIZE := 5120k
 527         FILESYSTEMS := squashfs
 528         IMAGES += factory_30.bin factory_35.bin
 529         IMAGE/sysupgrade.bin := append-kernel | append-rootfs | pad-rootfs | check-size | append-metadata
 530         IMAGE/factory_30.bin := append-kernel | pad-to $$$$(KERNEL_SIZE) | append-rootfs | pad-rootfs | check-size | SenaoFW $$$$(PRODUCT_ID) $$$$(FW_VER)
 531         IMAGE/factory_35.bin := qsdk-ipq-factory-nor | check-size | SenaoFW $$$$(PRODUCT_ID_NEW) $$$$(FW_VER_NEW)
 532 endef
 533 # Missing DSA Setup
 534 #TARGET_DEVICES += engenius_ens620ext
 535
 536 define Device/extreme-networks_ws-ap3915i
 537         $(call Device/FitImage)
 538         DEVICE_VENDOR := Extreme Networks
 539         DEVICE_MODEL := WS-AP3915i
 540         IMAGE_SIZE := 30080k
 541         SOC := qcom-ipq4029
 542         BLOCKSIZE := 128k
 543         IMAGE/sysupgrade.bin := append-kernel | append-rootfs | pad-rootfs | check-size | append-metadata
 544         DEVICE_PACKAGES := ipq-wifi-extreme-networks_ws-ap3915i
 545 endef
 546 TARGET_DEVICES += extreme-networks_ws-ap3915i
 547
 548 define Device/ezviz_cs-w3-wd1200g-eup
 549         $(call Device/FitImage)
 550         DEVICE_VENDOR := EZVIZ
 551         DEVICE_MODEL := CS-W3-WD1200G
 552         DEVICE_VARIANT := EUP
 553         IMAGE_SIZE := 14848k
 554         KERNEL_SIZE = 6m
 555         SOC := qcom-ipq4018
 556         IMAGE/sysupgrade.bin := append-kernel | append-rootfs | pad-rootfs | \
 557                 append-metadata
 558         DEVICE_PACKAGES := -kmod-ath10k-ct kmod-ath10k-ct-smallbuffers
 559         DEVICE_COMPAT_VERSION := 2.0
 560         DEVICE_COMPAT_MESSAGE := uboot's bootcmd has to be updated (see wiki). \
 561                 Upgrade via sysupgrade mechanism is not possible.
 562 endef
 563 # Missing DSA Setup
 564 #TARGET_DEVICES += ezviz_cs-w3-wd1200g-eup
 565
 566 define Device/glinet_gl-a1300
 567         $(call Device/FitImage)
 568         $(call Device/UbiFit)
 569         DEVICE_VENDOR := GL.iNet
 570         DEVICE_MODEL := GL-A1300
 571         SOC := qcom-ipq4018
 572         DEVICE_DTS_CONFIG := config@ap.dk01.1-c2
 573         BLOCKSIZE := 128k
 574         PAGESIZE := 2048
 575         IMAGE_SIZE := 131072k
 576         DEVICE_PACKAGE := ipq-wifi-glinet_gl-a1300
 577 endef
 578 TARGET_DEVICES += glinet_gl-a1300
 579
 580 define Device/glinet_gl-ap1300
 581         $(call Device/FitImage)
 582         $(call Device/UbiFit)
 583         DEVICE_VENDOR := GL.iNet
 584         DEVICE_MODEL := GL-AP1300
 585         SOC := qcom-ipq4018
 586         DEVICE_DTS_CONFIG := config@ap.dk01.1-c2
 587         BLOCKSIZE := 128k
 588         PAGESIZE := 2048
 589         IMAGE_SIZE := 131072k
 590         KERNEL_INSTALL := 1
 591         DEVICE_PACKAGES := ipq-wifi-glinet_gl-ap1300 kmod-usb-net-qmi-wwan kmod-usb-serial-option uqmi
 592 endef
 593 TARGET_DEVICES += glinet_gl-ap1300
 594
 595 define Device/glinet_gl-b1300
 596         $(call Device/FitzImage)
 597         DEVICE_VENDOR := GL.iNet
 598         DEVICE_MODEL := GL-B1300
 599         BOARD_NAME := gl-b1300
 600         SOC := qcom-ipq4029
 601         KERNEL_SIZE := 4096k
 602         IMAGE_SIZE := 26624k
 603         IMAGE/sysupgrade.bin := append-kernel |append-rootfs | pad-rootfs | append-metadata
 604 endef
 605 TARGET_DEVICES += glinet_gl-b1300
 606
 607 define Device/glinet_gl-b2200
 608         $(call Device/FitzImage)
 609         DEVICE_VENDOR := GL.iNet
 610         DEVICE_MODEL := GL-B2200
 611         SOC := qcom-ipq4019
 612         DEVICE_DTS_CONFIG := config@ap.dk04.1-c3
 613         KERNEL_INITRAMFS_SUFFIX := -recovery.itb
 614         IMAGES := emmc.img.gz sysupgrade.bin
 615         IMAGE/emmc.img.gz := qsdk-ipq-app-gpt |\
 616                 pad-to 1024k | append-kernel |\
 617                 pad-to 33792k | append-rootfs |\
 618                 append-metadata | gzip
 619         IMAGE/sysupgrade.bin := sysupgrade-tar | append-metadata
 620         DEVICE_PACKAGES := ath10k-firmware-qca9888-ct \
 621                 kmod-fs-ext4 kmod-mmc kmod-spi-dev mkf2fs e2fsprogs kmod-fs-f2fs
 622 endef
 623 TARGET_DEVICES += glinet_gl-b2200
 624
 625 define Device/glinet_gl-s1300
 626         $(call Device/FitzImage)
 627         DEVICE_VENDOR := GL.iNet
 628         DEVICE_MODEL := GL-S1300
 629         SOC := qcom-ipq4029
 630         KERNEL_SIZE := 4096k
 631         IMAGE_SIZE := 26624k
 632         IMAGES := sysupgrade.bin
 633         IMAGE/sysupgrade.bin := append-kernel | append-rootfs | pad-rootfs | append-metadata
 634         DEVICE_PACKAGES := ipq-wifi-glinet_gl-s1300 kmod-fs-ext4 kmod-mmc kmod-spi-dev
 635 endef
 636 # Missing DSA Setup
 637 #TARGET_DEVICES += glinet_gl-s1300
 638
 639 define Device/kernel-size-6350-8300
 640         DEVICE_COMPAT_VERSION := 2.0
 641         DEVICE_COMPAT_MESSAGE := Kernel partition size must be increased for \
 642         this OpenWrt version. Before continuing, you MUST issue either the \
 643         command "fw_setenv kernsize 500000" from the OpenWrt command line, \
 644         or "setenv kernsize 500000 ; saveenv" from the U-Boot serial console. \
 645         Instead of the sysupgrade image, you must then install the OpenWrt \
 646         factory image, setting the force flag and wiping the configuration. \
 647         (e.g. "sysupgrade -n -F openwrt-squashfs-factory.bin" on command line)
 648 endef
 649
 650 define Device/linksys_ea6350v3
 651         # The Linksys EA6350v3 has a uboot bootloader that does not
 652         # support either booting lzma kernel images nor booting UBI
 653         # partitions. This uboot, however, supports raw kernel images and
 654         # gzipped images.
 655         #
 656         # As configured by the OEM factory, the device will boot the kernel
 657         # from a fixed address with a fixed length of 3 MiB. Also, the
 658         # device has a hard-coded kernel command line that requires the
 659         # rootfs and alt_rootfs to be in mtd11 and mtd13 respectively.
 660         # Oh... and the kernel partition overlaps with the rootfs
 661         # partition (the same for alt_kernel and alt_rootfs).
 662         #
 663         # If you are planing re-partitioning the device, you may want to
 664         # keep these details in mind:
 665         # 1. The kernel addresses you should honor are 0x00000000 and
 666         #    0x02800000 respectively.
 667         # 2. The kernel size (plus the dtb) cannot exceed 3 MiB in size
 668         #    unless the uboot environment variable "kernsize" is increased.
 669         # 3. You can use 'zImage', but not a raw 'Image' packed with lzma.
 670         # 4. The kernel command line from uboot is harcoded to boot with
 671         #    rootfs either in mtd11 or mtd13.
 672         $(call Device/FitzImage)
 673         $(call Device/kernel-size-6350-8300)
 674         DEVICE_VENDOR := Linksys
 675         DEVICE_MODEL := EA6350
 676         DEVICE_VARIANT := v3
 677         SOC := qcom-ipq4018
 678         BLOCKSIZE := 128k
 679         PAGESIZE := 2048
 680         KERNEL_SIZE := 5120k
 681         IMAGE_SIZE := 35840k
 682         UBINIZE_OPTS := -E 5
 683         IMAGES += factory.bin
 684         IMAGE/factory.bin := append-kernel | append-uImage-fakehdr filesystem | pad-to $$$$(KERNEL_SIZE) | append-ubi | linksys-image type=EA6350v3
 685 endef
 686 TARGET_DEVICES += linksys_ea6350v3
 687
 688 define Device/linksys_ea8300
 689         $(call Device/FitzImage)
 690         $(call Device/kernel-size-6350-8300)
 691         DEVICE_VENDOR := Linksys
 692         DEVICE_MODEL := EA8300
 693         SOC := qcom-ipq4019
 694         KERNEL_SIZE := 5120k
 695         IMAGE_SIZE := 84992k
 696         BLOCKSIZE := 128k
 697         PAGESIZE := 2048
 698         UBINIZE_OPTS := -E 5    # EOD marks to "hide" factory sig at EOF
 699         IMAGES += factory.bin
 700         IMAGE/factory.bin  := append-kernel | pad-to $$$$(KERNEL_SIZE) | append-ubi | linksys-image type=EA8300
 701         DEVICE_PACKAGES := ath10k-firmware-qca9888-ct ipq-wifi-linksys_ea8300 kmod-usb-ledtrig-usbport
 702 endef
 703 TARGET_DEVICES += linksys_ea8300
 704
 705 define Device/linksys_mr8300
 706         $(call Device/FitzImage)
 707         $(call Device/kernel-size-6350-8300)
 708         DEVICE_VENDOR := Linksys
 709         DEVICE_MODEL := MR8300
 710         SOC := qcom-ipq4019
 711         KERNEL_SIZE := 5120k
 712         IMAGE_SIZE := 84992k
 713         BLOCKSIZE := 128k
 714         PAGESIZE := 2048
 715         UBINIZE_OPTS := -E 5    # EOD marks to "hide" factory sig at EOF
 716         IMAGES += factory.bin
 717         IMAGE/factory.bin  := append-kernel | pad-to $$$$(KERNEL_SIZE) | append-ubi | linksys-image type=MR8300
 718         DEVICE_PACKAGES := ath10k-firmware-qca9888-ct kmod-usb-ledtrig-usbport
 719 endef
 720 TARGET_DEVICES += linksys_mr8300
 721
 722 define Device/linksys_whw03v2
 723         $(call Device/FitzImage)
 724         DEVICE_VENDOR := Linksys
 725         DEVICE_MODEL := WHW03
 726         DEVICE_VARIANT := V2
 727         SOC := qcom-ipq4019
 728         KERNEL_SIZE := 6144k
 729         IMAGE_SIZE := 158720k
 730         BLOCKSIZE := 128k
 731         PAGESIZE := 2048
 732         UBINIZE_OPTS := -E 5    # EOD marks to "hide" factory sig at EOF
 733         IMAGES += factory.bin
 734         IMAGE/factory.bin  := append-kernel | pad-to $$$$(KERNEL_SIZE) | append-ubi | linksys-image type=WHW03v2
 735         DEVICE_PACKAGES := ath10k-firmware-qca9888-ct ipq-wifi-linksys_whw03v2 kmod-leds-pca963x kmod-spi-dev kmod-bluetooth
 736 endef
 737 TARGET_DEVICES += linksys_whw03v2
 738
 739 define Device/linksys_whw01
 740         $(call Device/FitzImage)
 741         DEVICE_VENDOR := Linksys
 742         DEVICE_MODEL := WHW01
 743         KERNEL_SIZE := 6144k
 744         IMAGE_SIZE := 75776K
 745         SOC := qcom-ipq4018
 746         BLOCKSIZE := 128k
 747         PAGESIZE := 2048
 748         UBINIZE_OPTS := -E 5    # EOD marks to "hide" factory sig at EOF
 749         IMAGES += factory.bin
 750         IMAGE/factory.bin := append-kernel | pad-to $$$$(KERNEL_SIZE) | append-ubi | linksys-image type=WHW01
 751         DEVICE_PACKAGES := uboot-envtools kmod-leds-pca963x
 752 endef
 753 TARGET_DEVICES += linksys_whw01
 754
 755 define Device/luma_wrtq-329acn
 756         $(call Device/FitImage)
 757         DEVICE_VENDOR := Luma Home
 758         DEVICE_MODEL := WRTQ-329ACN
 759         SOC := qcom-ipq4018
 760         DEVICE_PACKAGES := kmod-ath3k kmod-eeprom-at24 kmod-i2c-gpio
 761         IMAGE_SIZE := 76632k
 762         BLOCKSIZE := 128k
 763         PAGESIZE := 2048
 764 endef
 765 TARGET_DEVICES += luma_wrtq-329acn
 766
 767 define Device/meraki_mr33
 768         $(call Device/FitImage)
 769         DEVICE_VENDOR := Cisco Meraki
 770         DEVICE_MODEL := MR33
 771         SOC := qcom-ipq4029
 772         BLOCKSIZE := 128k
 773         PAGESIZE := 2048
 774         DEVICE_PACKAGES := -swconfig ath10k-firmware-qca9887-ct
 775 endef
 776 TARGET_DEVICES += meraki_mr33
 777
 778 define Device/meraki_mr74
 779         $(call Device/FitImage)
 780         DEVICE_VENDOR := Cisco Meraki
 781         DEVICE_MODEL := MR74
 782         SOC := qcom-ipq4029
 783         BLOCKSIZE := 128k
 784         PAGESIZE := 2048
 785         DEVICE_PACKAGES := -swconfig ath10k-firmware-qca9887-ct
 786         DEVICE_DTS_CONFIG := config@3
 787 endef
 788 TARGET_DEVICES += meraki_mr74
 789
 790 define Device/mobipromo_cm520-79f
 791         $(call Device/FitzImage)
 792         $(call Device/UbiFit)
 793         DEVICE_VENDOR := MobiPromo
 794         DEVICE_MODEL := CM520-79F
 795         SOC := qcom-ipq4019
 796         BLOCKSIZE := 128k
 797         PAGESIZE := 2048
 798         DEVICE_PACKAGES := kmod-usb-ledtrig-usbport
 799 endef
 800 TARGET_DEVICES += mobipromo_cm520-79f
 801
 802 define Device/netgear_ex61x0v2
 803         $(call Device/DniImage)
 804         DEVICE_VENDOR := NETGEAR
 805         DEVICE_DTS_CONFIG := config@4
 806         NETGEAR_BOARD_ID := EX6150v2series
 807         NETGEAR_HW_ID := 29765285+16+0+128+2x2
 808         IMAGE_SIZE := 14400k
 809         SOC := qcom-ipq4018
 810 endef
 811
 812 define Device/netgear_ex6100v2
 813         $(call Device/netgear_ex61x0v2)
 814         DEVICE_MODEL := EX6100
 815         DEVICE_VARIANT := v2
 816 endef
 817 TARGET_DEVICES += netgear_ex6100v2
 818
 819 define Device/netgear_ex6150v2
 820         $(call Device/netgear_ex61x0v2)
 821         DEVICE_MODEL := EX6150
 822         DEVICE_VARIANT := v2
 823 endef
 824 TARGET_DEVICES += netgear_ex6150v2
 825
 826 define Device/netgear_orbi
 827         $(call Device/DniImage)
 828         SOC := qcom-ipq4019
 829         DEVICE_VENDOR := NETGEAR
 830         IMAGE/factory.img := append-kernel | pad-offset 128k 64 | \
 831                 append-uImage-fakehdr filesystem | pad-to $$$$(KERNEL_SIZE) | \
 832                 append-rootfs | pad-rootfs | netgear-dni
 833         IMAGE/sysupgrade.bin/squashfs := append-rootfs | pad-to 64k | \
 834                 sysupgrade-tar rootfs=$$$$@ | append-metadata
 835         DEVICE_PACKAGES := ath10k-firmware-qca9984-ct e2fsprogs kmod-fs-ext4 losetup
 836 endef
 837
 838 define Device/netgear_rbx50
 839         $(call Device/netgear_orbi)
 840         NETGEAR_HW_ID := 29765352+0+4000+512+2x2+2x2+4x4
 841         KERNEL_SIZE := 3932160
 842         ROOTFS_SIZE := 32243712
 843         IMAGE_SIZE := 36175872
 844 endef
 845
 846 define Device/netgear_rbr50
 847         $(call Device/netgear_rbx50)
 848         DEVICE_MODEL := RBR50
 849         DEVICE_VARIANT := v1
 850         NETGEAR_BOARD_ID := RBR50
 851 endef
 852 TARGET_DEVICES += netgear_rbr50
 853
 854 define Device/netgear_rbs50
 855         $(call Device/netgear_rbx50)
 856         DEVICE_MODEL := RBS50
 857         DEVICE_VARIANT := v1
 858         NETGEAR_BOARD_ID := RBS50
 859 endef
 860 TARGET_DEVICES += netgear_rbs50
 861
 862 define Device/netgear_srx60
 863         $(call Device/netgear_orbi)
 864         NETGEAR_HW_ID := 29765352+0+4096+512+2x2+2x2+4x4
 865         KERNEL_SIZE := 3932160
 866         ROOTFS_SIZE := 32243712
 867         IMAGE_SIZE := 36175872
 868 endef
 869
 870 define Device/netgear_srr60
 871         $(call Device/netgear_srx60)
 872         DEVICE_MODEL := SRR60
 873         NETGEAR_BOARD_ID := SRR60
 874 endef
 875 TARGET_DEVICES += netgear_srr60
 876
 877 define Device/netgear_srs60
 878         $(call Device/netgear_srx60)
 879         DEVICE_MODEL := SRS60
 880         NETGEAR_BOARD_ID := SRS60
 881 endef
 882 TARGET_DEVICES += netgear_srs60
 883
 884 define Device/netgear_wac510
 885         $(call Device/FitImage)
 886         $(call Device/UbiFit)
 887         DEVICE_VENDOR := Netgear
 888         DEVICE_MODEL := WAC510
 889         SOC := qcom-ipq4018
 890         DEVICE_DTS_CONFIG := config@5
 891         BLOCKSIZE := 128k
 892         PAGESIZE := 2048
 893         IMAGES += factory.tar
 894         IMAGE/factory.tar := append-ubi | wac5xx-netgear-tar
 895         DEVICE_PACKAGES := uboot-envtools
 896 endef
 897 TARGET_DEVICES += netgear_wac510
 898
 899 define Device/openmesh_a42
 900         $(call Device/FitImageLzma)
 901         DEVICE_VENDOR := OpenMesh
 902         DEVICE_MODEL := A42
 903         SOC := qcom-ipq4018
 904         DEVICE_DTS_CONFIG := config@om.a42
 905         BLOCKSIZE := 64k
 906         KERNEL = kernel-bin | lzma | fit lzma $$(KDIR)/image-$$(DEVICE_DTS).dtb | pad-to $$(BLOCKSIZE)
 907         IMAGE_SIZE := 15616k
 908         IMAGES += factory.bin
 909         IMAGE/factory.bin := append-rootfs | pad-rootfs | openmesh-image ce_type=A42
 910         IMAGE/sysupgrade.bin/squashfs := append-rootfs | pad-rootfs | sysupgrade-tar rootfs=$$$$@ | append-metadata
 911 endef
 912 TARGET_DEVICES += openmesh_a42
 913
 914 define Device/openmesh_a62
 915         $(call Device/FitImageLzma)
 916         DEVICE_VENDOR := OpenMesh
 917         DEVICE_MODEL := A62
 918         SOC := qcom-ipq4019
 919         DEVICE_DTS_CONFIG := config@om.a62
 920         BLOCKSIZE := 64k
 921         KERNEL = kernel-bin | lzma | fit lzma $$(KDIR)/image-$$(DEVICE_DTS).dtb | pad-to $$(BLOCKSIZE)
 922         IMAGE_SIZE := 15552k
 923         IMAGES += factory.bin
 924         IMAGE/factory.bin := append-rootfs | pad-rootfs | openmesh-image ce_type=A62
 925         IMAGE/sysupgrade.bin/squashfs := append-rootfs | pad-rootfs | sysupgrade-tar rootfs=$$$$@ | append-metadata
 926         DEVICE_PACKAGES := ath10k-firmware-qca9888-ct
 927 endef
 928 TARGET_DEVICES += openmesh_a62
 929
 930 define Device/p2w_r619ac
 931         $(call Device/FitzImage)
 932         $(call Device/UbiFit)
 933         DEVICE_VENDOR := P&W
 934         DEVICE_MODEL := R619AC
 935         SOC := qcom-ipq4019
 936         DEVICE_DTS_CONFIG := config@10
 937         BLOCKSIZE := 128k
 938         PAGESIZE := 2048
 939         DEVICE_PACKAGES := ipq-wifi-p2w_r619ac
 940 endef
 941
 942 define Device/p2w_r619ac-64m
 943         $(call Device/p2w_r619ac)
 944         DEVICE_VARIANT := 64M NAND
 945         IMAGES += factory.bin
 946         IMAGE/factory.bin := append-ubi | qsdk-ipq-factory-nand
 947 endef
 948 TARGET_DEVICES += p2w_r619ac-64m
 949
 950 define Device/p2w_r619ac-128m
 951         $(call Device/p2w_r619ac)
 952         DEVICE_VARIANT := 128M NAND
 953 endef
 954 TARGET_DEVICES += p2w_r619ac-128m
 955
 956 define Device/pakedge_wr-1
 957         $(call Device/FitImageLzma)
 958         DEVICE_VENDOR := Pakedge
 959         DEVICE_MODEL := WR-1
 960         DEVICE_DTS_CONFIG := config@ap.dk01.1-c1
 961         DEVICE_PACKAGES := ipq-wifi-pakedge_wr-1
 962         SOC := qcom-ipq4018
 963         BLOCKSIZE := 64k
 964         IMAGE_SIZE := 31232k
 965         IMAGE/sysupgrade.bin := append-kernel | pad-to $$$$(BLOCKSIZE) | append-rootfs | pad-rootfs | append-metadata
 966 endef
 967 TARGET_DEVICES += pakedge_wr-1
 968
 969 define Device/plasmacloud_pa1200
 970         $(call Device/FitImageLzma)
 971         DEVICE_VENDOR := Plasma Cloud
 972         DEVICE_MODEL := PA1200
 973         SOC := qcom-ipq4018
 974         DEVICE_DTS_CONFIG := config@pc.pa1200
 975         BLOCKSIZE := 64k
 976         KERNEL = kernel-bin | lzma | fit lzma $$(KDIR)/image-$$(DEVICE_DTS).dtb | pad-to $$(BLOCKSIZE)
 977         IMAGE_SIZE := 15616k
 978         IMAGES += factory.bin
 979         IMAGE/factory.bin := append-rootfs | pad-rootfs | openmesh-image ce_type=PA1200
 980         IMAGE/sysupgrade.bin/squashfs := append-rootfs | pad-rootfs | sysupgrade-tar rootfs=$$$$@ | append-metadata
 981 endef
 982 TARGET_DEVICES += plasmacloud_pa1200
 983
 984 define Device/plasmacloud_pa2200
 985         $(call Device/FitImageLzma)
 986         DEVICE_VENDOR := Plasma Cloud
 987         DEVICE_MODEL := PA2200
 988         SOC := qcom-ipq4019
 989         DEVICE_DTS_CONFIG := config@pc.pa2200
 990         BLOCKSIZE := 64k
 991         KERNEL = kernel-bin | lzma | fit lzma $$(KDIR)/image-$$(DEVICE_DTS).dtb | pad-to $$(BLOCKSIZE)
 992         IMAGE_SIZE := 15552k
 993         IMAGES += factory.bin
 994         IMAGE/factory.bin := append-rootfs | pad-rootfs | openmesh-image ce_type=PA2200
 995         IMAGE/sysupgrade.bin/squashfs := append-rootfs | pad-rootfs | sysupgrade-tar rootfs=$$$$@ | append-metadata
 996         DEVICE_PACKAGES := ath10k-firmware-qca9888-ct
 997 endef
 998 TARGET_DEVICES += plasmacloud_pa2200
 999
1000 define Device/qcom_ap-dk01.1-c1
1001         DEVICE_VENDOR := Qualcomm Atheros
1002         DEVICE_MODEL := AP-DK01.1
1003         DEVICE_VARIANT := C1
1004         BOARD_NAME := ap-dk01.1-c1
1005         SOC := qcom-ipq4019
1006         DEVICE_DTS := qcom-ipq4019-ap.dk01.1-c1
1007         KERNEL_INSTALL := 1
1008         KERNEL_SIZE := 4096k
1009         IMAGE_SIZE := 26624k
1010         $(call Device/FitImage)
1011         IMAGE/sysupgrade.bin := append-kernel | pad-to $$$$(KERNEL_SIZE) | append-rootfs | pad-rootfs | append-metadata
1012         DEFAULT := n
1013 endef
1014 TARGET_DEVICES += qcom_ap-dk01.1-c1
1015
1016 define Device/qcom_ap-dk04.1-c1
1017         $(call Device/FitImage)
1018         $(call Device/UbiFit)
1019         DEVICE_VENDOR := Qualcomm Atheros
1020         DEVICE_MODEL := AP-DK04.1
1021         DEVICE_VARIANT := C1
1022         SOC := qcom-ipq4019
1023         DEVICE_DTS := qcom-ipq4019-ap.dk04.1-c1
1024         KERNEL_INSTALL := 1
1025         KERNEL_SIZE := 4048k
1026         BLOCKSIZE := 128k
1027         PAGESIZE := 2048
1028         BOARD_NAME := ap-dk04.1-c1
1029         DEFAULT := n
1030 endef
1031 TARGET_DEVICES += qcom_ap-dk04.1-c1
1032
1033 define Device/qxwlan_e2600ac-c1
1034         $(call Device/FitImage)
1035         DEVICE_VENDOR := Qxwlan
1036         DEVICE_MODEL := E2600AC
1037         DEVICE_VARIANT := C1
1038         BOARD_NAME := e2600ac-c1
1039         SOC := qcom-ipq4019
1040         KERNEL_SIZE := 4096k
1041         IMAGE_SIZE := 31232k
1042         IMAGE/sysupgrade.bin := append-kernel | append-rootfs | pad-rootfs | append-metadata
1043         DEVICE_PACKAGES := ipq-wifi-qxwlan_e2600ac-c1
1044         DEFAULT := n
1045 endef
1046 # Missing DSA Setup
1047 #TARGET_DEVICES += qxwlan_e2600ac-c1
1048
1049 define Device/qxwlan_e2600ac-c2
1050         $(call Device/FitImage)
1051         $(call Device/UbiFit)
1052         DEVICE_VENDOR := Qxwlan
1053         DEVICE_MODEL := E2600AC
1054         DEVICE_VARIANT := C2
1055         SOC := qcom-ipq4019
1056         KERNEL_INSTALL := 1
1057         BLOCKSIZE := 128k
1058         PAGESIZE := 2048
1059         DEVICE_PACKAGES := ipq-wifi-qxwlan_e2600ac-c2
1060 endef
1061 # Missing DSA Setup
1062 #TARGET_DEVICES += qxwlan_e2600ac-c2
1063
1064 define Device/sony_ncp-hg100-cellular
1065         $(call Device/FitImage)
1066         DEVICE_VENDOR := Sony
1067         DEVICE_MODEL := NCP-HG100/Cellular
1068         DEVICE_DTS_CONFIG := config@ap.dk04.1-c4
1069         SOC := qcom-ipq4019
1070         KERNEL_SIZE := 8192k
1071         IMAGE_SIZE := 128m
1072         DEVICE_PACKAGES := e2fsprogs ipq-wifi-sony_ncp-hg100-cellular \
1073                 kmod-fs-ext4 uqmi
1074 endef
1075 TARGET_DEVICES += sony_ncp-hg100-cellular
1076
1077 define Device/teltonika_rutx10
1078         $(call Device/FitImage)
1079         $(call Device/UbiFit)
1080         DEVICE_VENDOR := Teltonika
1081         DEVICE_MODEL := RUTX10
1082         SOC := qcom-ipq4018
1083         DEVICE_DTS_CONFIG := config@5
1084         KERNEL_INSTALL := 1
1085         BLOCKSIZE := 128k
1086         PAGESIZE := 2048
1087         FILESYSTEMS := squashfs
1088         IMAGE/factory.ubi := append-ubi | qsdk-ipq-factory-nand | append-rutx-metadata
1089         DEVICE_PACKAGES := ipq-wifi-teltonika_rutx kmod-bluetooth
1090 endef
1091 # Missing DSA Setup
1092 #TARGET_DEVICES += teltonika_rutx10
1093
1094 define Device/tel_x1pro
1095         $(call Device/FitImage)
1096         DEVICE_VENDOR := Telco
1097         DEVICE_MODEL := X1 Pro
1098         SOC := qcom-ipq4019
1099         KERNEL_SIZE := 4096k
1100         IMAGE_SIZE := 31232k
1101         IMAGE/sysupgrade.bin := append-kernel | append-rootfs | pad-rootfs | append-metadata
1102         DEVICE_PACKAGES := kmod-usb-net-qmi-wwan kmod-usb-serial-option uqmi
1103         DEFAULT := n
1104 endef
1105 # Missing DSA Setup
1106 #TARGET_DEVICES += tel_x1pro
1107
1108 define Device/unielec_u4019-32m
1109         $(call Device/FitImage)
1110         DEVICE_VENDOR := Unielec
1111         DEVICE_MODEL := U4019
1112         DEVICE_VARIANT := 32M
1113         BOARD_NAME := u4019-32m
1114         SOC := qcom-ipq4019
1115         KERNEL_SIZE := 4096k
1116         IMAGE_SIZE := 31232k
1117         IMAGE/sysupgrade.bin := append-kernel | append-rootfs | pad-rootfs | append-metadata
1118         DEFAULT := n
1119 endef
1120 # Missing DSA Setup
1121 #TARGET_DEVICES += unielec_u4019-32m
1122
1123 define Device/wallys_dr40x9
1124         $(call Device/FitImage)
1125         $(call Device/UbiFit)
1126         DEVICE_VENDOR := Wallys
1127         DEVICE_MODEL := DR40X9
1128         SOC := qcom-ipq40x9
1129         DEVICE_DTS_CONFIG := config@ap.dk07.1-c1
1130         BLOCKSIZE := 128k
1131         PAGESIZE := 2048
1132         DEVICE_PACKAGES := ipq-wifi-wallys_dr40x9
1133 endef
1134 TARGET_DEVICES += wallys_dr40x9
1135
1136 define Device/zte_mf18a
1137         $(call Device/FitImage)
1138         DEVICE_VENDOR := ZTE
1139         DEVICE_MODEL := MF18A
1140         SOC := qcom-ipq4019
1141         DEVICE_DTS_CONFIG := config@ap.dk04.1-c1
1142         BLOCKSIZE := 128k
1143         PAGESIZE := 2048
1144         KERNEL_IN_UBI := 1
1145         DEVICE_PACKAGES := ath10k-firmware-qca99x0-ct ipq-wifi-zte_mf18a
1146 endef
1147 TARGET_DEVICES += zte_mf18a
1148
1149 define Device/zte_mf28x_common
1150         $(call Device/FitzImage)
1151         DEVICE_VENDOR := ZTE
1152         SOC := qcom-ipq4019
1153         DEVICE_DTS_CONFIG := config@ap.dk04.1-c1
1154         BLOCKSIZE := 128k
1155         PAGESIZE := 2048
1156         KERNEL_IN_UBI := 1
1157         DEVICE_PACKAGES := kmod-usb-net-qmi-wwan kmod-usb-serial-option uqmi
1158 endef
1159
1160 define Device/zte_mf286d
1161         $(call Device/zte_mf28x_common)
1162         DEVICE_MODEL := MF286D
1163 endef
1164 TARGET_DEVICES += zte_mf286d
1165
1166 define Device/zte_mf289f
1167         $(call Device/zte_mf28x_common)
1168         DEVICE_MODEL := MF289F
1169         DEVICE_PACKAGES += ipq-wifi-zte_mf289f ath10k-firmware-qca9984-ct
1170 endef
1171 TARGET_DEVICES += zte_mf289f
1172
1173 define Device/zyxel_nbg6617
1174         $(call Device/FitImageLzma)
1175         DEVICE_VENDOR := ZyXEL
1176         DEVICE_MODEL := NBG6617
1177         SOC := qcom-ipq4018
1178         KERNEL_SIZE := 4096k
1179         ROOTFS_SIZE := 24960k
1180         RAS_BOARD := NBG6617
1181         RAS_ROOTFS_SIZE := 19840k
1182         RAS_VERSION := "$(VERSION_DIST) $(REVISION)"
1183         IMAGE/sysupgrade.bin := append-kernel | append-rootfs | pad-rootfs | append-metadata
1184         IMAGES += factory.bin
1185 #       The ZyXEL firmware allows flashing thru the web-gui only when the rootfs is
1186 #       at least as large as the one of the initial firmware image (not the current
1187 #       one on the device). This only applies to the Web-UI, the bootlaoder ignores
1188 #       this minimum-size. However, the larger image can be flashed both ways.
1189         IMAGE/factory.bin := append-rootfs | pad-rootfs | pad-to 64k | check-size $$$$(ROOTFS_SIZE) | zyxel-ras-image separate-kernel
1190         IMAGE/sysupgrade.bin/squashfs := append-rootfs | pad-rootfs | check-size $$$$(ROOTFS_SIZE) | sysupgrade-tar rootfs=$$$$@ | append-metadata
1191         DEVICE_PACKAGES := kmod-usb-ledtrig-usbport
1192 endef
1193 TARGET_DEVICES += zyxel_nbg6617
1194
1195 define Device/zyxel_wre6606
1196         $(call Device/FitImage)
1197         DEVICE_VENDOR := ZyXEL
1198         DEVICE_MODEL := WRE6606
1199         DEVICE_DTS_CONFIG := config@4
1200         SOC := qcom-ipq4018
1201         IMAGE_SIZE := 13184k
1202         IMAGE/sysupgrade.bin := append-kernel | append-rootfs | pad-rootfs | check-size | append-metadata
1203         DEVICE_PACKAGES := -kmod-ath10k-ct kmod-ath10k-ct-smallbuffers
1204 endef
1205 # Missing DSA Setup
1206 #TARGET_DEVICES += zyxel_wre6606