1 include $(TOPDIR
)/rules.mk
2 include $(INCLUDE_DIR
)/image.mk
4 DEVICE_VARS
+= NETGEAR_BOARD_ID NETGEAR_HW_ID
5 DEVICE_VARS
+= RAS_BOARD RAS_ROOTFS_SIZE RAS_VERSION
6 DEVICE_VARS
+= WRGG_DEVNAME WRGG_SIGNATURE
10 KERNEL_DEPENDS
= $$(wildcard $(DTS_DIR
)/$$(DEVICE_DTS
).dts
)
11 KERNEL_INITRAMFS_PREFIX
:= $$(IMG_PREFIX
)-$(1)-initramfs
12 KERNEL_PREFIX
:= $$(IMAGE_PREFIX
)
13 KERNEL_LOADADDR
:= 0x80208000
14 DEVICE_DTS
= $$(SOC
)-$(lastword
$(subst _
, ,$(1)))
15 SUPPORTED_DEVICES
:= $(subst _
,$(comma
),$(1))
16 IMAGE
/sysupgrade.bin
= sysupgrade-tar | append-metadata
17 IMAGE
/sysupgrade.bin
/squashfs
:=
20 define Device
/FitImage
21 KERNEL_SUFFIX
:= -fit-uImage.itb
22 KERNEL
= kernel-bin | gzip | fit gzip
$$(DTS_DIR
)/$$(DEVICE_DTS
).dtb
26 define Device
/FitImageLzma
27 KERNEL_SUFFIX
:= -fit-uImage.itb
28 KERNEL
= kernel-bin | lzma | fit lzma
$$(DTS_DIR
)/$$(DEVICE_DTS
).dtb
32 define Device
/FitzImage
33 KERNEL_SUFFIX
:= -fit-zImage.itb
34 KERNEL
= kernel-bin | fit none
$$(DTS_DIR
)/$$(DEVICE_DTS
).dtb
40 IMAGES
:= nand-factory.ubi nand-sysupgrade.bin
41 IMAGE
/nand-factory.ubi
:= append-ubi
42 IMAGE
/nand-sysupgrade.bin
:= sysupgrade-tar | append-metadata
45 define Device
/DniImage
46 KERNEL_SUFFIX
:= -fit-uImage.itb
47 KERNEL
= kernel-bin | gzip | fit gzip
$$(DTS_DIR
)/$$(DEVICE_DTS
).dtb
51 IMAGES
:= factory.img sysupgrade.bin
52 IMAGE
/factory.img
:= append-kernel | pad-offset
64k
64 | append-uImage-fakehdr filesystem | append-rootfs | pad-rootfs | netgear-dni
53 IMAGE
/sysupgrade.bin
:= append-kernel | pad-offset
64k
64 | append-uImage-fakehdr filesystem | append-rootfs | pad-rootfs | append-metadata
56 define Build
/append-rootfshdr
57 mkimage
-A
$(LINUX_KARCH
) \
58 -O linux
-T filesystem \
59 -C lzma
-a
$(KERNEL_LOADADDR
) -e
$(if
$(KERNEL_ENTRY
),$(KERNEL_ENTRY
),$(KERNEL_LOADADDR
)) \
60 -n root.squashfs
-d
$(IMAGE_ROOTFS
) $@.new
61 dd if
=$@.new bs
=64 count
=1 >> $(IMAGE_KERNEL
)
64 define Build
/mkmylofw_32m
65 $(eval device_id
=$(word 1,$(1)))
66 $(eval revision
=$(word 2,$(1)))
69 size
="$$(stat -c%s $@)" \
70 pad
="$(subst k,* 1024,$(BLOCKSIZE))" \
71 pad
="(pad - (size % pad)) % pad" \
72 newsize
='size + pad'; \
73 $(STAGING_DIR_HOST
)/bin
/mkmylofw \
74 -B WPE72
-i
0x11f6:$(device_id
):0x11f6:$(device_id
) -r
$(revision
) \
75 -s
0x2000000 -p0x180000
:$$newsize:al
:0x80208000:"OpenWrt":$@ \
80 define Build
/qsdk-ipq-factory-nand-askey
81 $(TOPDIR
)/scripts
/mkits-qsdk-ipq-image.sh
$@.its\
82 askey_kernel
$(IMAGE_KERNEL
) \
83 askey_fs
$(IMAGE_ROOTFS
) \
85 PATH
=$(LINUX_DIR
)/scripts
/dtc
:$(PATH
) mkimage
-f
$@.its
$@.new
90 -$(STAGING_DIR_HOST
)/bin
/mksenaofw \
91 -n
$(BOARD_NAME
) -r
$(VENDOR_ID
) -p
$(1) \
92 -c
$(DATECODE
) -w
$(2) -x
$(CW_VER
) -t
0 \
98 define Build
/wrgg-image
101 -d
"$(WRGG_DEVNAME)" \
102 -s
"$(WRGG_SIGNATURE)" \
107 define Device
/8dev_habanero-dvk
108 $(call Device
/FitImageLzma
)
109 DEVICE_VENDOR
:= 8devices
110 DEVICE_MODEL
:= Habanero DVK
113 DEVICE_PACKAGES
:= ipq-wifi-8dev_habanero-dvk
114 IMAGES
:= sysupgrade.bin
115 IMAGE
/sysupgrade.bin
:= append-kernel | pad-to
64k | append-rootfs | pad-rootfs | append-metadata | check-size
117 TARGET_DEVICES
+= 8dev_habanero-dvk
119 define Device
/8dev_jalapeno-common
120 $(call Device
/FitImage
)
121 $(call Device
/UbiFit
)
127 define Device
/8dev_jalapeno
128 $(call Device
/8dev_jalapeno-common
)
129 DEVICE_VENDOR
:= 8devices
130 DEVICE_MODEL
:= Jalapeno
132 TARGET_DEVICES
+= 8dev_jalapeno
134 define Device
/alfa-network_ap120c-ac
135 $(call Device
/FitImage
)
136 $(call Device
/UbiFit
)
137 DEVICE_VENDOR
:= ALFA Network
138 DEVICE_MODEL
:= AP120C-AC
140 DEVICE_PACKAGES
:= kmod-usb-acm \
141 kmod-tpm-i2c-atmel uboot-envtools
145 IMAGES
:= nand-factory.bin nand-sysupgrade.bin
146 IMAGE
/nand-factory.bin
:= append-ubi | qsdk-ipq-factory-nand
148 TARGET_DEVICES
+= alfa-network_ap120c-ac
150 define Device
/aruba_ap-303
151 $(call Device
/FitImageLzma
)
152 DEVICE_VENDOR
:= Aruba
153 DEVICE_MODEL
:= AP-303
155 DEVICE_PACKAGES
:= ipq-wifi-aruba_ap-303
156 IMAGES
:= sysupgrade.bin
158 TARGET_DEVICES
+= aruba_ap-303
160 define Device
/aruba_ap-303h
161 $(call Device
/FitImageLzma
)
162 DEVICE_VENDOR
:= Aruba
163 DEVICE_MODEL
:= AP-303H
165 DEVICE_PACKAGES
:= ipq-wifi-aruba_ap-303
166 IMAGES
:= sysupgrade.bin
168 TARGET_DEVICES
+= aruba_ap-303h
170 define Device
/asus_map-ac2200
171 $(call Device
/FitImageLzma
)
172 DEVICE_VENDOR
:= ASUS
173 DEVICE_MODEL
:= Lyra
(MAP-AC2200
)
175 IMAGES
:= sysupgrade.bin
176 DEVICE_PACKAGES
:= ath10k-firmware-qca9888-ct kmod-ath3k
178 TARGET_DEVICES
+= asus_map-ac2200
180 define Device
/asus_rt-ac58u
181 $(call Device
/FitImageLzma
)
182 DEVICE_VENDOR
:= ASUS
183 DEVICE_MODEL
:= RT-AC58U
188 IMAGE_SIZE
:= 20439364
189 FILESYSTEMS
:= squashfs
190 # Someone - in their infinite wisdom - decided to put the firmware
191 # version in front of the image name \03\00\00\04 => Version 3.0.0.4
192 # Since u-boot works with strings we either need another fixup step
193 # to add a version... or we are very careful not to add '\0' into that
194 # string and call it a day.... Yeah, we do the latter!
195 UIMAGE_NAME
:=$(shell echo
-e
'\03\01\01\01RT-AC58U')
196 IMAGES
:= sysupgrade.bin
197 DEVICE_PACKAGES
:= -kmod-ath10k-ct kmod-ath10k-ct-smallbuffers \
198 kmod-usb-ledtrig-usbport
200 TARGET_DEVICES
+= asus_rt-ac58u
202 define Device
/avm_fritzbox-4040
203 $(call Device
/FitImageLzma
)
205 DEVICE_MODEL
:= FRITZ
!Box
4040
207 BOARD_NAME
:= fritz4040
209 UBOOT_PATH
:= $(STAGING_DIR_IMAGE
)/uboot-fritz4040.bin
210 UBOOT_PARTITION_SIZE
:= 524288
211 IMAGES
= eva.bin sysupgrade.bin
212 IMAGE
/eva.bin
:= append-uboot | pad-to
$$$$(UBOOT_PARTITION_SIZE
) | append-kernel | append-rootfs | pad-rootfs
213 IMAGE
/sysupgrade.bin
:= append-kernel | append-rootfs | pad-rootfs | append-metadata
214 DEVICE_PACKAGES
:= fritz-tffs fritz-caldata
216 TARGET_DEVICES
+= avm_fritzbox-4040
218 define Device
/avm_fritzbox-7530
219 $(call Device
/FitImageLzma
)
221 DEVICE_MODEL
:= FRITZ
!Box
7530
223 DEVICE_PACKAGES
:= fritz-caldata fritz-tffs-nand
224 IMAGES
:= sysupgrade.bin
226 TARGET_DEVICES
+= avm_fritzbox-7530
228 define Device
/avm_fritzrepeater-1200
229 $(call Device
/FitImageLzma
)
231 DEVICE_MODEL
:= FRITZ
!Repeater
1200
233 DEVICE_PACKAGES
:= fritz-caldata fritz-tffs-nand ipq-wifi-avm_fritzrepeater-1200
234 IMAGES
:= sysupgrade.bin
236 TARGET_DEVICES
+= avm_fritzrepeater-1200
238 define Device
/avm_fritzrepeater-3000
239 $(call Device
/FitImageLzma
)
241 DEVICE_MODEL
:= FRITZ
!Repeater
3000
243 DEVICE_PACKAGES
:= ath10k-firmware-qca9984-ct fritz-caldata fritz-tffs-nand
244 IMAGES
:= sysupgrade.bin
246 TARGET_DEVICES
+= avm_fritzrepeater-3000
248 define Device
/cellc_rtl30vw
249 KERNEL_SUFFIX
:= -fit-uImage.itb
250 KERNEL_INITRAMFS
= kernel-bin | gzip | fit gzip
$$(DTS_DIR
)/$$(DEVICE_DTS
).dtb
251 KERNEL
= kernel-bin | gzip | fit gzip
$$(DTS_DIR
)/$$(DEVICE_DTS
).dtb | uImage lzma | pad-to
2048
254 IMAGES
:= nand-factory.bin nand-sysupgrade.bin
255 IMAGE
/nand-factory.bin
:= append-rootfshdr | append-ubi | qsdk-ipq-factory-nand-askey
256 IMAGE
/nand-sysupgrade.bin
:= append-rootfshdr | sysupgrade-tar | append-metadata
257 DEVICE_VENDOR
:= Cell C
258 DEVICE_MODEL
:= RTL30VW
260 DEVICE_DTS_CONFIG
:= config@
5
266 DEVICE_PACKAGES
:= kmod-usb-net-qmi-wwan kmod-usb-serial-option uqmi ipq-wifi-cellc_rtl30vw
268 TARGET_DEVICES
+= cellc_rtl30vw
270 define Device
/cilab_meshpoint-one
271 $(call Device
/8dev_jalapeno-common
)
272 DEVICE_VENDOR
:= Crisis Innovation Lab
273 DEVICE_MODEL
:= MeshPoint.One
274 DEVICE_PACKAGES
:= kmod-i2c-gpio kmod-iio-bmp280-i2c kmod-hwmon-ina2xx kmod-rtc-pcf2127
276 TARGET_DEVICES
+= cilab_meshpoint-one
278 define Device
/compex_wpj419
279 $(call Device
/FitImage
)
280 $(call Device
/UbiFit
)
281 DEVICE_VENDOR
:= Compex
282 DEVICE_MODEL
:= WPJ419
284 DEVICE_DTS_CONFIG
:= config@
12
288 FILESYSTEMS
:= squashfs
290 TARGET_DEVICES
+= compex_wpj419
292 define Device
/compex_wpj428
293 $(call Device
/FitImage
)
294 DEVICE_VENDOR
:= Compex
295 DEVICE_MODEL
:= WPJ428
297 DEVICE_DTS_CONFIG
:= config@
4
301 IMAGES
= sysupgrade.bin cpximg-6a04.bin
302 IMAGE
/sysupgrade.bin
:= append-kernel | append-rootfs | pad-rootfs | append-metadata
303 IMAGE
/cpximg-6a04.bin
:= append-kernel | append-rootfs | pad-rootfs | mkmylofw_32m
0x8A2 3
304 DEVICE_PACKAGES
:= kmod-gpio-beeper
306 TARGET_DEVICES
+= compex_wpj428
308 define Device
/dlink_dap-2610
309 $(call Device
/FitImageLzma
)
310 DEVICE_VENDOR
:= D-Link
311 DEVICE_MODEL
:= DAP-2610
313 DEVICE_DTS_CONFIG
:= config@ap.dk01.1
-c1
315 WRGG_DEVNAME
:= /dev
/mtdblock
/8
316 WRGG_SIGNATURE
:= wapac30_dkbs_dap2610
318 IMAGES
:= sysupgrade.bin factory.bin
319 # Bootloader expects a special 160 byte header which is added by
321 # Factory image size must be larger than 6MB, and size in wrgg header must
322 # match actual factory image size to be flashable from D-Link http server.
323 # Bootloader verifies checksum of wrgg image before booting, thus jffs2
324 # cannot be part of the wrgg image. This is solved in the factory image by
325 # having the rootfs at the end of the image (without pad-rootfs). And in
326 # the sysupgrade image only the kernel is included in the wrgg checksum,
327 # but this is not flashable from the D-link http server.
328 # append-rootfs must start on an erase block boundary.
329 IMAGE
/factory.bin
:= append-kernel | pad-offset
6144k
160 | append-rootfs | wrgg-image | check-size
330 IMAGE
/sysupgrade.bin
:= append-kernel | wrgg-image | pad-to
$$$$(BLOCKSIZE
) | append-rootfs | pad-rootfs | check-size | append-metadata
331 DEVICE_PACKAGES
:= ipq-wifi-dlink_dap2610
333 TARGET_DEVICES
+= dlink_dap-2610
335 define Device
/engenius_eap1300
336 $(call Device
/FitImage
)
337 DEVICE_VENDOR
:= EnGenius
338 DEVICE_MODEL
:= EAP1300
339 DEVICE_DTS_CONFIG
:= config@
4
340 BOARD_NAME
:= eap1300
344 IMAGES
:= sysupgrade.bin
345 IMAGE
/sysupgrade.bin
:= append-kernel | append-rootfs | pad-rootfs | append-metadata
347 TARGET_DEVICES
+= engenius_eap1300
349 define Device
/engenius_eap2200
350 $(call Device
/FitImage
)
351 $(call Device
/UbiFit
)
352 DEVICE_VENDOR
:= EnGenius
353 DEVICE_MODEL
:= EAP2200
357 DEVICE_PACKAGES
:= ath10k-firmware-qca9888-ct ipq-wifi-engenius_eap2200
-kmod-ath10k-ct kmod-ath10k-ct-smallbuffers
359 TARGET_DEVICES
+= engenius_eap2200
361 define Device
/engenius_emd1
362 $(call Device
/FitImage
)
363 DEVICE_VENDOR
:= EnGenius
365 DEVICE_DTS_CONFIG
:= config@
4
368 IMAGES
:= sysupgrade.bin factory.bin
369 IMAGE
/sysupgrade.bin
:= append-kernel | append-rootfs | pad-rootfs | append-metadata
370 IMAGE
/factory.bin
:= qsdk-ipq-factory-nor | check-size
372 TARGET_DEVICES
+= engenius_emd1
374 define Device
/engenius_ens620ext
375 $(call Device
/FitImage
)
376 DEVICE_VENDOR
:= EnGenius
377 DEVICE_MODEL
:= ENS620EXT
379 DEVICE_DTS_CONFIG
:= config@
4
382 BOARD_NAME
:= ENS620EXT
385 PRODUCT_ID_NEW
:= 0xA4
392 FILESYSTEMS
:= squashfs
393 IMAGES
:= sysupgrade.bin factory_30.bin factory_35.bin
394 IMAGE
/sysupgrade.bin
:= append-kernel | append-rootfs | pad-rootfs | check-size | append-metadata
395 IMAGE
/factory_30.bin
:= append-kernel | pad-to
$$$$(KERNEL_SIZE
) | append-rootfs | pad-rootfs | check-size | SenaoFW
$$$$(PRODUCT_ID
) $$$$(FW_VER
)
396 IMAGE
/factory_35.bin
:= qsdk-ipq-factory-nor | check-size | SenaoFW
$$$$(PRODUCT_ID_NEW
) $$$$(FW_VER_NEW
)
398 TARGET_DEVICES
+= engenius_ens620ext
400 define Device
/ezviz_cs-w3-wd1200g-eup
401 $(call Device
/FitImage
)
402 DEVICE_VENDOR
:= EZVIZ
403 DEVICE_MODEL
:= CS-W3-WD1200G
404 DEVICE_VARIANT
:= EUP
405 DEVICE_DTS_CONFIG
:= config@
4
408 IMAGES
:= sysupgrade.bin
409 IMAGE
/sysupgrade.bin
:= append-kernel | append-rootfs | pad-rootfs | \
411 DEVICE_PACKAGES
:= -kmod-ath10k-ct kmod-ath10k-ct-smallbuffers \
412 ipq-wifi-ezviz_cs-w3-wd1200g-eup
414 TARGET_DEVICES
+= ezviz_cs-w3-wd1200g-eup
416 define Device
/glinet_gl-b1300
417 $(call Device
/FitImage
)
418 DEVICE_VENDOR
:= GL.iNet
419 DEVICE_MODEL
:= GL-B1300
420 BOARD_NAME
:= gl-b1300
424 IMAGES
:= sysupgrade.bin
425 IMAGE
/sysupgrade.bin
:= append-kernel |append-rootfs | pad-rootfs | append-metadata
427 TARGET_DEVICES
+= glinet_gl-b1300
429 define Device
/linksys_ea6350v3
430 # The Linksys EA6350v3 has a uboot bootloader that does not
431 # support either booting lzma kernel images nor booting UBI
432 # partitions. This uboot, however, supports raw kernel images and
435 # As for the time of writing this, the device will boot the kernel
436 # from a fixed address with a fixed length of 3MiB. Also, the
437 # device has a hard-coded kernel command line that requieres the
438 # rootfs and alt_rootfs to be in mtd11 and mtd13 respectively.
439 # Oh... and the kernel partition overlaps with the rootfs
440 # partition (the same for alt_kernel and alt_rootfs).
442 # If you are planing re-partitioning the device, you may want to
443 # keep those details in mind:
444 # 1. The kernel adresses you should honor are 0x00000000 and
445 # 0x02800000 respectively.
446 # 2. The kernel size (plus the dtb) cannot exceed 3.00MiB in size.
447 # 3. You can use 'zImage', but not a raw 'Image' packed with lzma.
448 # 4. The kernel command line from uboot is harcoded to boot with
449 # rootfs either in mtd11 or mtd13.
450 $(call Device
/FitzImage
)
451 DEVICE_VENDOR
:= Linksys
452 DEVICE_MODEL
:= EA6350
460 IMAGES
:= factory.bin sysupgrade.bin
461 IMAGE
/factory.bin
:= append-kernel | append-uImage-fakehdr filesystem | pad-to
$$$$(KERNEL_SIZE
) | append-ubi | linksys-image type
=EA6350v3
462 DEVICE_PACKAGES
:= uboot-envtools
464 TARGET_DEVICES
+= linksys_ea6350v3
466 define Device
/linksys_ea8300
467 $(call Device
/FitzImage
)
468 DEVICE_VENDOR
:= Linksys
469 DEVICE_MODEL
:= EA8300
475 UBINIZE_OPTS
:= -E
5 # EOD marks to "hide" factory sig at EOF
476 IMAGES
:= sysupgrade.bin factory.bin
477 IMAGE
/factory.bin
:= append-kernel | pad-to
$$$$(KERNEL_SIZE
) | append-ubi | linksys-image type
=EA8300
478 DEVICE_PACKAGES
:= uboot-envtools ath10k-firmware-qca9888-ct ipq-wifi-linksys_ea8300 kmod-usb-ledtrig-usbport
480 TARGET_DEVICES
+= linksys_ea8300
482 define Device
/meraki_mr33
483 $(call Device
/FitImage
)
484 DEVICE_VENDOR
:= Cisco Meraki
489 IMAGES
= sysupgrade.bin
490 DEVICE_PACKAGES
:= -swconfig ath10k-firmware-qca9887-ct
492 TARGET_DEVICES
+= meraki_mr33
494 define Device
/mobipromo_cm520-79f
495 $(call Device
/FitzImage
)
496 $(call Device
/UbiFit
)
497 DEVICE_VENDOR
:= MobiPromo
498 DEVICE_MODEL
:= CM520-79F
502 DEVICE_PACKAGES
:= ipq-wifi-mobipromo_cm520-79f kmod-usb-ledtrig-usbport
504 TARGET_DEVICES
+= mobipromo_cm520-79f
506 define Device
/netgear_ex61x0v2
507 $(call Device
/DniImage
)
508 DEVICE_DTS_CONFIG
:= config@
4
509 NETGEAR_BOARD_ID
:= EX6150v2series
510 NETGEAR_HW_ID
:= 29765285+16+0+128+2x2
514 define Device
/netgear_ex6100v2
515 $(call Device
/netgear_ex61x0v2
)
516 DEVICE_VENDOR
:= Netgear
517 DEVICE_MODEL
:= EX6100
520 TARGET_DEVICES
+= netgear_ex6100v2
522 define Device
/netgear_ex6150v2
523 $(call Device
/netgear_ex61x0v2
)
524 DEVICE_VENDOR
:= Netgear
525 DEVICE_MODEL
:= EX6150
528 TARGET_DEVICES
+= netgear_ex6150v2
530 define Device
/openmesh_a42
531 $(call Device
/FitImageLzma
)
532 DEVICE_VENDOR
:= OpenMesh
535 DEVICE_DTS_CONFIG
:= config@om.a42
537 KERNEL
= kernel-bin | lzma | fit lzma
$$(DTS_DIR
)/$$(DEVICE_DTS
).dtb | pad-to
$$(BLOCKSIZE
)
539 IMAGES
= factory.bin sysupgrade.bin
540 IMAGE
/factory.bin
:= append-rootfs | pad-rootfs | openmesh-image ce_type
=A42
541 IMAGE
/sysupgrade.bin
/squashfs
:= append-rootfs | pad-rootfs | sysupgrade-tar rootfs
=$$$$@ | append-metadata
542 DEVICE_PACKAGES
:= uboot-envtools
544 TARGET_DEVICES
+= openmesh_a42
546 define Device
/openmesh_a62
547 $(call Device
/FitImageLzma
)
548 DEVICE_VENDOR
:= OpenMesh
551 DEVICE_DTS_CONFIG
:= config@om.a62
553 KERNEL
= kernel-bin | lzma | fit lzma
$$(DTS_DIR
)/$$(DEVICE_DTS
).dtb | pad-to
$$(BLOCKSIZE
)
555 IMAGES
= factory.bin sysupgrade.bin
556 IMAGE
/factory.bin
:= append-rootfs | pad-rootfs | openmesh-image ce_type
=A62
557 IMAGE
/sysupgrade.bin
/squashfs
:= append-rootfs | pad-rootfs | sysupgrade-tar rootfs
=$$$$@ | append-metadata
558 DEVICE_PACKAGES
:= ath10k-firmware-qca9888-ct uboot-envtools
561 TARGET_DEVICES
+= openmesh_a62
563 define Device
/qcom_ap-dk01.1
-c1
564 DEVICE_VENDOR
:= Qualcomm Atheros
565 DEVICE_MODEL
:= AP-DK01.1
567 BOARD_NAME
:= ap-dk01.1
-c1
569 DEVICE_DTS
:= qcom-ipq4019-ap.dk01.1
-c1
573 $(call Device
/FitImage
)
574 IMAGES
:= sysupgrade.bin
575 IMAGE
/sysupgrade.bin
:= append-kernel | pad-to
$$$$(KERNEL_SIZE
) | append-rootfs | pad-rootfs | append-metadata
577 TARGET_DEVICES
+= qcom_ap-dk01.1
-c1
579 define Device
/qcom_ap-dk04.1
-c1
580 $(call Device
/FitImage
)
581 $(call Device
/UbiFit
)
582 DEVICE_VENDOR
:= Qualcomm Atheros
583 DEVICE_MODEL
:= AP-DK04.1
586 DEVICE_DTS
:= qcom-ipq4019-ap.dk04.1
-c1
591 BOARD_NAME
:= ap-dk04.1
-c1
593 TARGET_DEVICES
+= qcom_ap-dk04.1
-c1
595 define Device
/qxwlan_e2600ac-c1
596 $(call Device
/FitImage
)
597 DEVICE_VENDOR
:= Qxwlan
598 DEVICE_MODEL
:= E2600AC
600 BOARD_NAME
:= e2600ac-c1
604 IMAGES
:= sysupgrade.bin
605 IMAGE
/sysupgrade.bin
:= append-kernel | append-rootfs | pad-rootfs | append-metadata
606 DEVICE_PACKAGES
:= ipq-wifi-qxwlan_e2600ac
608 TARGET_DEVICES
+= qxwlan_e2600ac-c1
610 define Device
/qxwlan_e2600ac-c2
611 $(call Device
/FitImage
)
612 $(call Device
/UbiFit
)
613 DEVICE_VENDOR
:= Qxwlan
614 DEVICE_MODEL
:= E2600AC
620 DEVICE_PACKAGES
:= ipq-wifi-qxwlan_e2600ac
622 TARGET_DEVICES
+= qxwlan_e2600ac-c2
624 define Device
/unielec_u4019-32m
625 $(call Device
/FitImage
)
626 DEVICE_VENDOR
:= Unielec
627 DEVICE_MODEL
:= U4019
628 DEVICE_VARIANT
:= 32M
629 BOARD_NAME
:= u4019-32m
633 IMAGES
:= sysupgrade.bin
634 IMAGE
/sysupgrade.bin
:= append-kernel | append-rootfs | pad-rootfs | append-metadata
636 TARGET_DEVICES
+= unielec_u4019-32m
638 define Device
/zyxel_nbg6617
639 $(call Device
/FitImageLzma
)
640 DEVICE_VENDOR
:= ZyXEL
641 DEVICE_MODEL
:= NBG6617
643 ROOTFS_SIZE
:= 24960k
645 RAS_ROOTFS_SIZE
:= 19840k
646 RAS_VERSION
:= "$(VERSION_DIST) $(REVISION)"
647 IMAGE
/sysupgrade.bin
:= append-kernel | append-rootfs | pad-rootfs | append-metadata
648 IMAGES
:= sysupgrade.bin factory.bin
649 # The ZyXEL firmware allows flashing thru the web-gui only when the rootfs is
650 # at least as large as the one of the initial firmware image (not the current
651 # one on the device). This only applies to the Web-UI, the bootlaoder ignores
652 # this minimum-size. However, the larger image can be flashed both ways.
653 IMAGE
/factory.bin
:= append-rootfs | pad-rootfs | pad-to
64k | check-size
$$$$(ROOTFS_SIZE
) | zyxel-ras-image separate-kernel
654 IMAGE
/sysupgrade.bin
/squashfs
:= append-rootfs | pad-rootfs | check-size
$$$$(ROOTFS_SIZE
) | sysupgrade-tar rootfs
=$$$$@ | append-metadata
655 DEVICE_PACKAGES
:= uboot-envtools kmod-usb-ledtrig-usbport
657 TARGET_DEVICES
+= zyxel_nbg6617
659 define Device
/zyxel_wre6606
660 $(call Device
/FitImage
)
661 DEVICE_VENDOR
:= ZyXEL
662 DEVICE_MODEL
:= WRE6606
663 DEVICE_DTS_CONFIG
:= config@
4
665 IMAGES
:= sysupgrade.bin
666 IMAGE
/sysupgrade.bin
:= append-kernel | append-rootfs | pad-rootfs | append-metadata
667 DEVICE_PACKAGES
:= -kmod-ath10k-ct kmod-ath10k-ct-smallbuffers
669 TARGET_DEVICES
+= zyxel_wre6606
671 $(eval
$(call BuildImage
))