target/linux/ipq40xx/image/Makefile

   1 include $(TOPDIR)/rules.mk
   2 include $(INCLUDE_DIR)/image.mk
   3
   4 DEVICE_VARS += NETGEAR_BOARD_ID NETGEAR_HW_ID
   5 DEVICE_VARS += RAS_BOARD RAS_ROOTFS_SIZE RAS_VERSION
   6 DEVICE_VARS += WRGG_DEVNAME WRGG_SIGNATURE
   7
   8 define Device/Default
   9         PROFILES := Default
  10         KERNEL_DEPENDS = $$(wildcard $(DTS_DIR)/$$(DEVICE_DTS).dts)
  11         KERNEL_INITRAMFS_PREFIX := $$(IMG_PREFIX)-$(1)-initramfs
  12         KERNEL_PREFIX := $$(IMAGE_PREFIX)
  13         KERNEL_LOADADDR := 0x80208000
  14         DEVICE_DTS = $$(SOC)-$(lastword $(subst _, ,$(1)))
  15         SUPPORTED_DEVICES := $(subst _,$(comma),$(1))
  16         IMAGE/sysupgrade.bin = sysupgrade-tar | append-metadata
  17         IMAGE/sysupgrade.bin/squashfs :=
  18 endef
  19
  20 define Device/FitImage
  21         KERNEL_SUFFIX := -fit-uImage.itb
  22         KERNEL = kernel-bin | gzip | fit gzip $$(DTS_DIR)/$$(DEVICE_DTS).dtb
  23         KERNEL_NAME := Image
  24 endef
  25
  26 define Device/FitImageLzma
  27         KERNEL_SUFFIX := -fit-uImage.itb
  28         KERNEL = kernel-bin | lzma | fit lzma $$(DTS_DIR)/$$(DEVICE_DTS).dtb
  29         KERNEL_NAME := Image
  30 endef
  31
  32 define Device/FitzImage
  33         KERNEL_SUFFIX := -fit-zImage.itb
  34         KERNEL = kernel-bin | fit none $$(DTS_DIR)/$$(DEVICE_DTS).dtb
  35         KERNEL_NAME := zImage
  36 endef
  37
  38 define Device/UbiFit
  39         KERNEL_IN_UBI := 1
  40         IMAGES := nand-factory.ubi nand-sysupgrade.bin
  41         IMAGE/nand-factory.ubi := append-ubi
  42         IMAGE/nand-sysupgrade.bin := sysupgrade-tar | append-metadata
  43 endef
  44
  45 define Device/DniImage
  46         KERNEL_SUFFIX := -fit-uImage.itb
  47         KERNEL = kernel-bin | gzip | fit gzip $$(DTS_DIR)/$$(DEVICE_DTS).dtb
  48         KERNEL_NAME := Image
  49         NETGEAR_BOARD_ID :=
  50         NETGEAR_HW_ID :=
  51         IMAGES := factory.img sysupgrade.bin
  52         IMAGE/factory.img := append-kernel | pad-offset 64k 64 | append-uImage-fakehdr filesystem | append-rootfs | pad-rootfs | netgear-dni
  53         IMAGE/sysupgrade.bin := append-kernel | pad-offset 64k 64 | append-uImage-fakehdr filesystem | append-rootfs | pad-rootfs | append-metadata
  54 endef
  55
  56 define Build/mkmylofw_32m
  57         $(eval device_id=$(word 1,$(1)))
  58         $(eval revision=$(word 2,$(1)))
  59
  60         let \
  61                 size="$$(stat -c%s $@)" \
  62                 pad="$(subst k,* 1024,$(BLOCKSIZE))" \
  63                 pad="(pad - (size % pad)) % pad" \
  64                 newsize='size + pad'; \
  65                 $(STAGING_DIR_HOST)/bin/mkmylofw \
  66                 -B WPE72 -i 0x11f6:$(device_id):0x11f6:$(device_id) -r $(revision) \
  67                 -s 0x2000000 -p0x180000:$$newsize:al:0x80208000:"OpenWrt":$@ \
  68                 $@.new
  69         @mv $@.new $@
  70 endef
  71
  72 define Build/SenaoFW
  73         -$(STAGING_DIR_HOST)/bin/mksenaofw \
  74                 -n $(BOARD_NAME) -r $(VENDOR_ID) -p $(1) \
  75                 -c $(DATECODE) -w $(2) -x $(CW_VER) -t 0 \
  76                 -e $@ \
  77                 -o $@.new
  78         @cp $@.new $@
  79 endef
  80
  81 define Build/wrgg-image
  82         mkwrggimg -i $@ \
  83         -o $@.new \
  84         -d "$(WRGG_DEVNAME)" \
  85         -s "$(WRGG_SIGNATURE)" \
  86         -v "" -m "" -B ""
  87         mv $@.new $@
  88 endef
  89
  90 define Device/8dev_habanero-dvk
  91         $(call Device/FitImageLzma)
  92         DEVICE_VENDOR := 8devices
  93         DEVICE_MODEL := Habanero DVK
  94         IMAGE_SIZE := 30976k
  95         SOC := qcom-ipq4019
  96         DEVICE_PACKAGES := ipq-wifi-8dev_habanero-dvk
  97         IMAGES := sysupgrade.bin
  98         IMAGE/sysupgrade.bin := append-kernel | pad-to 64k | append-rootfs | pad-rootfs | append-metadata | check-size
  99 endef
 100 TARGET_DEVICES += 8dev_habanero-dvk
 101
 102 define Device/8dev_jalapeno-common
 103         $(call Device/FitImage)
 104         $(call Device/UbiFit)
 105         BLOCKSIZE := 128k
 106         PAGESIZE := 2048
 107         SOC := qcom-ipq4018
 108 endef
 109
 110 define Device/8dev_jalapeno
 111         $(call Device/8dev_jalapeno-common)
 112         DEVICE_VENDOR := 8devices
 113         DEVICE_MODEL := Jalapeno
 114 endef
 115 TARGET_DEVICES += 8dev_jalapeno
 116
 117 define Device/alfa-network_ap120c-ac
 118         $(call Device/FitImage)
 119         $(call Device/UbiFit)
 120         DEVICE_VENDOR := ALFA Network
 121         DEVICE_MODEL := AP120C-AC
 122         SOC := qcom-ipq4018
 123         DEVICE_PACKAGES := kmod-usb-acm \
 124                 kmod-tpm-i2c-atmel uboot-envtools
 125         BLOCKSIZE := 128k
 126         PAGESIZE := 2048
 127         IMAGE_SIZE := 65536k
 128         IMAGES := nand-factory.bin nand-sysupgrade.bin
 129         IMAGE/nand-factory.bin := append-ubi | qsdk-ipq-factory-nand
 130 endef
 131 TARGET_DEVICES += alfa-network_ap120c-ac
 132
 133 define Device/aruba_ap-303
 134         $(call Device/FitImageLzma)
 135         DEVICE_VENDOR := Aruba
 136         DEVICE_MODEL := AP-303
 137         SOC := qcom-ipq4029
 138         DEVICE_PACKAGES := ipq-wifi-aruba_ap-303
 139         IMAGES := sysupgrade.bin
 140 endef
 141 TARGET_DEVICES += aruba_ap-303
 142
 143 define Device/aruba_ap-303h
 144         $(call Device/FitImageLzma)
 145         DEVICE_VENDOR := Aruba
 146         DEVICE_MODEL := AP-303H
 147         SOC := qcom-ipq4029
 148         DEVICE_PACKAGES := ipq-wifi-aruba_ap-303
 149         IMAGES := sysupgrade.bin
 150 endef
 151 TARGET_DEVICES += aruba_ap-303h
 152
 153 define Device/asus_map-ac2200
 154         $(call Device/FitImageLzma)
 155         DEVICE_VENDOR := ASUS
 156         DEVICE_MODEL := Lyra (MAP-AC2200)
 157         SOC := qcom-ipq4019
 158         IMAGES := sysupgrade.bin
 159         DEVICE_PACKAGES := ath10k-firmware-qca9888-ct kmod-ath3k
 160 endef
 161 TARGET_DEVICES += asus_map-ac2200
 162
 163 define Device/asus_rt-ac58u
 164         $(call Device/FitImageLzma)
 165         DEVICE_VENDOR := ASUS
 166         DEVICE_MODEL := RT-AC58U
 167         SOC := qcom-ipq4018
 168         BLOCKSIZE := 128k
 169         PAGESIZE := 2048
 170         DTB_SIZE := 65536
 171         IMAGE_SIZE := 20439364
 172         FILESYSTEMS := squashfs
 173 #       Someone - in their infinite wisdom - decided to put the firmware
 174 #       version in front of the image name \03\00\00\04 => Version 3.0.0.4
 175 #       Since u-boot works with strings we either need another fixup step
 176 #       to add a version... or we are very careful not to add '\0' into that
 177 #       string and call it a day.... Yeah, we do the latter!
 178         UIMAGE_NAME:=$(shell echo -e '\03\01\01\01RT-AC58U')
 179         IMAGES := sysupgrade.bin
 180         DEVICE_PACKAGES := -kmod-ath10k-ct kmod-ath10k-ct-smallbuffers \
 181                 kmod-usb-ledtrig-usbport
 182 endef
 183 TARGET_DEVICES += asus_rt-ac58u
 184
 185 define Device/avm_fritzbox-4040
 186         $(call Device/FitImageLzma)
 187         DEVICE_VENDOR := AVM
 188         DEVICE_MODEL := FRITZ!Box 4040
 189         SOC := qcom-ipq4018
 190         BOARD_NAME := fritz4040
 191         IMAGE_SIZE := 29056k
 192         UBOOT_PATH := $(STAGING_DIR_IMAGE)/uboot-fritz4040.bin
 193         UBOOT_PARTITION_SIZE := 524288
 194         IMAGES = eva.bin sysupgrade.bin
 195         IMAGE/eva.bin := append-uboot | pad-to $$$$(UBOOT_PARTITION_SIZE) | append-kernel | append-rootfs | pad-rootfs
 196         IMAGE/sysupgrade.bin := append-kernel | append-rootfs | pad-rootfs | append-metadata
 197         DEVICE_PACKAGES := fritz-tffs fritz-caldata
 198 endef
 199 TARGET_DEVICES += avm_fritzbox-4040
 200
 201 define Device/avm_fritzbox-7530
 202         $(call Device/FitImageLzma)
 203         DEVICE_VENDOR := AVM
 204         DEVICE_MODEL := FRITZ!Box 7530
 205         SOC := qcom-ipq4019
 206         DEVICE_PACKAGES := fritz-caldata fritz-tffs-nand
 207         IMAGES := sysupgrade.bin
 208 endef
 209 TARGET_DEVICES += avm_fritzbox-7530
 210
 211 define Device/avm_fritzrepeater-1200
 212         $(call Device/FitImageLzma)
 213         DEVICE_VENDOR := AVM
 214         DEVICE_MODEL := FRITZ!Repeater 1200
 215         SOC := qcom-ipq4019
 216         DEVICE_PACKAGES := fritz-caldata fritz-tffs-nand ipq-wifi-avm_fritzrepeater-1200
 217         IMAGES := sysupgrade.bin
 218 endef
 219 TARGET_DEVICES += avm_fritzrepeater-1200
 220
 221 define Device/avm_fritzrepeater-3000
 222         $(call Device/FitImageLzma)
 223         DEVICE_VENDOR := AVM
 224         DEVICE_MODEL := FRITZ!Repeater 3000
 225         SOC := qcom-ipq4019
 226         DEVICE_PACKAGES := ath10k-firmware-qca9984-ct fritz-caldata fritz-tffs-nand
 227         IMAGES := sysupgrade.bin
 228 endef
 229 TARGET_DEVICES += avm_fritzrepeater-3000
 230
 231 define Device/cilab_meshpoint-one
 232         $(call Device/8dev_jalapeno-common)
 233         DEVICE_VENDOR := Crisis Innovation Lab
 234         DEVICE_MODEL := MeshPoint.One
 235         DEVICE_PACKAGES := kmod-i2c-gpio kmod-iio-bmp280-i2c kmod-hwmon-ina2xx kmod-rtc-pcf2127
 236 endef
 237 TARGET_DEVICES += cilab_meshpoint-one
 238
 239 define Device/compex_wpj419
 240         $(call Device/FitImage)
 241         $(call Device/UbiFit)
 242         DEVICE_VENDOR := Compex
 243         DEVICE_MODEL := WPJ419
 244         SOC := qcom-ipq4019
 245         DEVICE_DTS_CONFIG := config@12
 246         KERNEL_INSTALL := 1
 247         BLOCKSIZE := 128k
 248         PAGESIZE := 2048
 249         FILESYSTEMS := squashfs
 250 endef
 251 TARGET_DEVICES += compex_wpj419
 252
 253 define Device/compex_wpj428
 254         $(call Device/FitImage)
 255         DEVICE_VENDOR := Compex
 256         DEVICE_MODEL := WPJ428
 257         SOC := qcom-ipq4028
 258         DEVICE_DTS_CONFIG := config@4
 259         BLOCKSIZE := 64k
 260         IMAGE_SIZE := 31232k
 261         KERNEL_SIZE := 4096k
 262         IMAGES = sysupgrade.bin cpximg-6a04.bin
 263         IMAGE/sysupgrade.bin := append-kernel | append-rootfs | pad-rootfs | append-metadata
 264         IMAGE/cpximg-6a04.bin := append-kernel | append-rootfs | pad-rootfs | mkmylofw_32m 0x8A2 3
 265         DEVICE_PACKAGES := kmod-gpio-beeper
 266 endef
 267 TARGET_DEVICES += compex_wpj428
 268
 269 define Device/dlink_dap-2610
 270         $(call Device/FitImageLzma)
 271         DEVICE_VENDOR := D-Link
 272         DEVICE_MODEL := DAP-2610
 273         SOC := qcom-ipq4018
 274         DEVICE_DTS_CONFIG := config@ap.dk01.1-c1
 275         BLOCKSIZE := 64k
 276         WRGG_DEVNAME := /dev/mtdblock/8
 277         WRGG_SIGNATURE := wapac30_dkbs_dap2610
 278         IMAGE_SIZE := 14080k
 279         IMAGES := sysupgrade.bin factory.bin
 280         # Bootloader expects a special 160 byte header which is added by
 281         # wrgg-image.
 282         # Factory image size must be larger than 6MB, and size in wrgg header must
 283         # match actual factory image size to be flashable from D-Link http server.
 284         # Bootloader verifies checksum of wrgg image before booting, thus jffs2
 285         # cannot be part of the wrgg image. This is solved in the factory image by
 286         # having the rootfs at the end of the image (without pad-rootfs). And in
 287         # the sysupgrade image only the kernel is included in the wrgg checksum,
 288         # but this is not flashable from the D-link http server.
 289         # append-rootfs must start on an erase block boundary.
 290         IMAGE/factory.bin    := append-kernel | pad-offset 6144k 160 | append-rootfs | wrgg-image | check-size
 291         IMAGE/sysupgrade.bin := append-kernel | wrgg-image | pad-to $$$$(BLOCKSIZE) | append-rootfs | pad-rootfs | check-size | append-metadata
 292         DEVICE_PACKAGES := ipq-wifi-dlink_dap2610
 293 endef
 294 TARGET_DEVICES += dlink_dap-2610
 295
 296 define Device/engenius_eap1300
 297         $(call Device/FitImage)
 298         DEVICE_VENDOR := EnGenius
 299         DEVICE_MODEL := EAP1300
 300         DEVICE_DTS_CONFIG := config@4
 301         BOARD_NAME := eap1300
 302         SOC := qcom-ipq4018
 303         KERNEL_SIZE := 5120k
 304         IMAGE_SIZE := 25344k
 305         IMAGES := sysupgrade.bin
 306         IMAGE/sysupgrade.bin := append-kernel | append-rootfs | pad-rootfs | append-metadata
 307 endef
 308 TARGET_DEVICES += engenius_eap1300
 309
 310 define Device/engenius_eap2200
 311         $(call Device/FitImage)
 312         $(call Device/UbiFit)
 313         DEVICE_VENDOR := EnGenius
 314         DEVICE_MODEL := EAP2200
 315         SOC := qcom-ipq4019
 316         BLOCKSIZE := 128k
 317         PAGESIZE := 2048
 318         DEVICE_PACKAGES := ath10k-firmware-qca9888-ct ipq-wifi-engenius_eap2200 -kmod-ath10k-ct kmod-ath10k-ct-smallbuffers
 319 endef
 320 TARGET_DEVICES += engenius_eap2200
 321
 322 define Device/engenius_emd1
 323         $(call Device/FitImage)
 324         DEVICE_VENDOR := EnGenius
 325         DEVICE_MODEL := EMD1
 326         DEVICE_DTS_CONFIG := config@4
 327         SOC := qcom-ipq4018
 328         IMAGE_SIZE := 30720k
 329         IMAGES := sysupgrade.bin factory.bin
 330         IMAGE/sysupgrade.bin := append-kernel | append-rootfs | pad-rootfs | append-metadata
 331         IMAGE/factory.bin := qsdk-ipq-factory-nor | check-size
 332 endef
 333 TARGET_DEVICES += engenius_emd1
 334
 335 define Device/engenius_ens620ext
 336         $(call Device/FitImage)
 337         DEVICE_VENDOR := EnGenius
 338         DEVICE_MODEL := ENS620EXT
 339         SOC := qcom-ipq4018
 340         DEVICE_DTS_CONFIG := config@4
 341         BLOCKSIZE := 64k
 342         PAGESIZE := 256
 343         BOARD_NAME := ENS620EXT
 344         VENDOR_ID := 0x0101
 345         PRODUCT_ID := 0x79
 346         PRODUCT_ID_NEW := 0xA4
 347         DATECODE := 190507
 348         FW_VER := 3.1.2
 349         FW_VER_NEW := 3.5.6
 350         CW_VER := 1.8.99
 351         IMAGE_SIZE := 21312k
 352         KERNEL_SIZE := 5120k
 353         FILESYSTEMS := squashfs
 354         IMAGES := sysupgrade.bin factory_30.bin factory_35.bin
 355         IMAGE/sysupgrade.bin := append-kernel | append-rootfs | pad-rootfs | check-size | append-metadata
 356         IMAGE/factory_30.bin := append-kernel | pad-to $$$$(KERNEL_SIZE) | append-rootfs | pad-rootfs | check-size | SenaoFW $$$$(PRODUCT_ID) $$$$(FW_VER)
 357         IMAGE/factory_35.bin := qsdk-ipq-factory-nor | check-size | SenaoFW $$$$(PRODUCT_ID_NEW) $$$$(FW_VER_NEW)
 358 endef
 359 TARGET_DEVICES += engenius_ens620ext
 360
 361 define Device/ezviz_cs-w3-wd1200g-eup
 362         $(call Device/FitImage)
 363         DEVICE_VENDOR := EZVIZ
 364         DEVICE_MODEL := CS-W3-WD1200G
 365         DEVICE_VARIANT := EUP
 366         DEVICE_DTS_CONFIG := config@4
 367         IMAGE_SIZE := 14848k
 368         SOC := qcom-ipq4018
 369         IMAGES := sysupgrade.bin
 370         IMAGE/sysupgrade.bin := append-kernel | append-rootfs | pad-rootfs | \
 371                 append-metadata
 372         DEVICE_PACKAGES := -kmod-ath10k-ct kmod-ath10k-ct-smallbuffers \
 373                 ipq-wifi-ezviz_cs-w3-wd1200g-eup
 374 endef
 375 TARGET_DEVICES += ezviz_cs-w3-wd1200g-eup
 376
 377 define Device/glinet_gl-b1300
 378         $(call Device/FitImage)
 379         DEVICE_VENDOR := GL.iNet
 380         DEVICE_MODEL := GL-B1300
 381         BOARD_NAME := gl-b1300
 382         SOC := qcom-ipq4029
 383         KERNEL_SIZE := 4096k
 384         IMAGE_SIZE := 26624k
 385         IMAGES := sysupgrade.bin
 386         IMAGE/sysupgrade.bin := append-kernel |append-rootfs | pad-rootfs | append-metadata
 387 endef
 388 TARGET_DEVICES += glinet_gl-b1300
 389
 390 define Device/linksys_ea6350v3
 391         # The Linksys EA6350v3 has a uboot bootloader that does not
 392         # support either booting lzma kernel images nor booting UBI
 393         # partitions. This uboot, however, supports raw kernel images and
 394         # gzipped images.
 395         #
 396         # As for the time of writing this, the device will boot the kernel
 397         # from a fixed address with a fixed length of 3MiB. Also, the
 398         # device has a hard-coded kernel command line that requieres the
 399         # rootfs and alt_rootfs to be in mtd11 and mtd13 respectively.
 400         # Oh... and the kernel partition overlaps with the rootfs
 401         # partition (the same for alt_kernel and alt_rootfs).
 402         #
 403         # If you are planing re-partitioning the device, you may want to
 404         # keep those details in mind:
 405         # 1. The kernel adresses you should honor are 0x00000000 and
 406         #    0x02800000 respectively.
 407         # 2. The kernel size (plus the dtb) cannot exceed 3.00MiB in size.
 408         # 3. You can use 'zImage', but not a raw 'Image' packed with lzma.
 409         # 4. The kernel command line from uboot is harcoded to boot with
 410         #    rootfs either in mtd11 or mtd13.
 411         $(call Device/FitzImage)
 412         DEVICE_VENDOR := Linksys
 413         DEVICE_MODEL := EA6350
 414         DEVICE_VARIANT := v3
 415         SOC := qcom-ipq4018
 416         BLOCKSIZE := 128k
 417         PAGESIZE := 2048
 418         KERNEL_SIZE := 3072k
 419         IMAGE_SIZE := 37888k
 420         UBINIZE_OPTS := -E 5
 421         IMAGES := factory.bin sysupgrade.bin
 422         IMAGE/factory.bin := append-kernel | append-uImage-fakehdr filesystem | pad-to $$$$(KERNEL_SIZE) | append-ubi | linksys-image type=EA6350v3
 423         DEVICE_PACKAGES := uboot-envtools
 424 endef
 425 TARGET_DEVICES += linksys_ea6350v3
 426
 427 define Device/linksys_ea8300
 428         $(call Device/FitzImage)
 429         DEVICE_VENDOR := Linksys
 430         DEVICE_MODEL := EA8300
 431         SOC := qcom-ipq4019
 432         KERNEL_SIZE := 3072k
 433         IMAGE_SIZE := 87040k
 434         BLOCKSIZE := 128k
 435         PAGESIZE := 2048
 436         UBINIZE_OPTS := -E 5    # EOD marks to "hide" factory sig at EOF
 437         IMAGES := sysupgrade.bin factory.bin
 438         IMAGE/factory.bin  := append-kernel | pad-to $$$$(KERNEL_SIZE) | append-ubi | linksys-image type=EA8300
 439         DEVICE_PACKAGES := uboot-envtools ath10k-firmware-qca9888-ct ipq-wifi-linksys_ea8300 kmod-usb-ledtrig-usbport
 440 endef
 441 TARGET_DEVICES += linksys_ea8300
 442
 443 define Device/meraki_mr33
 444         $(call Device/FitImage)
 445         DEVICE_VENDOR := Cisco Meraki
 446         DEVICE_MODEL := MR33
 447         SOC := qcom-ipq4029
 448         BLOCKSIZE := 128k
 449         PAGESIZE := 2048
 450         IMAGES = sysupgrade.bin
 451         DEVICE_PACKAGES := -swconfig ath10k-firmware-qca9887-ct
 452 endef
 453 TARGET_DEVICES += meraki_mr33
 454
 455 define Device/netgear_ex61x0v2
 456         $(call Device/DniImage)
 457         DEVICE_DTS_CONFIG := config@4
 458         NETGEAR_BOARD_ID := EX6150v2series
 459         NETGEAR_HW_ID := 29765285+16+0+128+2x2
 460         SOC := qcom-ipq4018
 461 endef
 462
 463 define Device/netgear_ex6100v2
 464         $(call Device/netgear_ex61x0v2)
 465         DEVICE_VENDOR := Netgear
 466         DEVICE_MODEL := EX6100
 467         DEVICE_VARIANT := v2
 468 endef
 469 TARGET_DEVICES += netgear_ex6100v2
 470
 471 define Device/netgear_ex6150v2
 472         $(call Device/netgear_ex61x0v2)
 473         DEVICE_VENDOR := Netgear
 474         DEVICE_MODEL := EX6150
 475         DEVICE_VARIANT := v2
 476 endef
 477 TARGET_DEVICES += netgear_ex6150v2
 478
 479 define Device/openmesh_a42
 480         $(call Device/FitImageLzma)
 481         DEVICE_VENDOR := OpenMesh
 482         DEVICE_MODEL := A42
 483         SOC := qcom-ipq4018
 484         DEVICE_DTS_CONFIG := config@om.a42
 485         BLOCKSIZE := 64k
 486         KERNEL = kernel-bin | lzma | fit lzma $$(DTS_DIR)/$$(DEVICE_DTS).dtb | pad-to $$(BLOCKSIZE)
 487         IMAGE_SIZE := 15616k
 488         IMAGES = factory.bin sysupgrade.bin
 489         IMAGE/factory.bin := append-rootfs | pad-rootfs | openmesh-image ce_type=A42
 490         IMAGE/sysupgrade.bin/squashfs := append-rootfs | pad-rootfs | sysupgrade-tar rootfs=$$$$@ | append-metadata
 491         DEVICE_PACKAGES := uboot-envtools
 492 endef
 493 TARGET_DEVICES += openmesh_a42
 494
 495 define Device/openmesh_a62
 496         $(call Device/FitImageLzma)
 497         DEVICE_VENDOR := OpenMesh
 498         DEVICE_MODEL := A62
 499         SOC := qcom-ipq4019
 500         DEVICE_DTS_CONFIG := config@om.a62
 501         BLOCKSIZE := 64k
 502         KERNEL = kernel-bin | lzma | fit lzma $$(DTS_DIR)/$$(DEVICE_DTS).dtb | pad-to $$(BLOCKSIZE)
 503         IMAGE_SIZE := 15552k
 504         IMAGES = factory.bin sysupgrade.bin
 505         IMAGE/factory.bin := append-rootfs | pad-rootfs | openmesh-image ce_type=A62
 506         IMAGE/sysupgrade.bin/squashfs := append-rootfs | pad-rootfs | sysupgrade-tar rootfs=$$$$@ | append-metadata
 507         DEVICE_PACKAGES := ath10k-firmware-qca9888-ct uboot-envtools
 508 endef
 509
 510 TARGET_DEVICES += openmesh_a62
 511
 512 define Device/qcom_ap-dk01.1-c1
 513         DEVICE_VENDOR := Qualcomm Atheros
 514         DEVICE_MODEL := AP-DK01.1
 515         DEVICE_VARIANT := C1
 516         BOARD_NAME := ap-dk01.1-c1
 517         SOC := qcom-ipq4019
 518         DEVICE_DTS := qcom-ipq4019-ap.dk01.1-c1
 519         KERNEL_INSTALL := 1
 520         KERNEL_SIZE := 4096k
 521         IMAGE_SIZE := 26624k
 522         $(call Device/FitImage)
 523         IMAGES := sysupgrade.bin
 524         IMAGE/sysupgrade.bin := append-kernel | pad-to $$$$(KERNEL_SIZE) | append-rootfs | pad-rootfs | append-metadata
 525 endef
 526 TARGET_DEVICES += qcom_ap-dk01.1-c1
 527
 528 define Device/qcom_ap-dk04.1-c1
 529         $(call Device/FitImage)
 530         $(call Device/UbiFit)
 531         DEVICE_VENDOR := Qualcomm Atheros
 532         DEVICE_MODEL := AP-DK04.1
 533         DEVICE_VARIANT := C1
 534         SOC := qcom-ipq4019
 535         DEVICE_DTS := qcom-ipq4019-ap.dk04.1-c1
 536         KERNEL_INSTALL := 1
 537         KERNEL_SIZE := 4048k
 538         BLOCKSIZE := 128k
 539         PAGESIZE := 2048
 540         BOARD_NAME := ap-dk04.1-c1
 541 endef
 542 TARGET_DEVICES += qcom_ap-dk04.1-c1
 543
 544 define Device/qxwlan_e2600ac-c1
 545         $(call Device/FitImage)
 546         DEVICE_VENDOR := Qxwlan
 547         DEVICE_MODEL := E2600AC
 548         DEVICE_VARIANT := C1
 549         BOARD_NAME := e2600ac-c1
 550         SOC := qcom-ipq4019
 551         KERNEL_SIZE := 4096k
 552         IMAGE_SIZE := 31232k
 553         IMAGES := sysupgrade.bin
 554         IMAGE/sysupgrade.bin := append-kernel | append-rootfs | pad-rootfs | append-metadata
 555         DEVICE_PACKAGES := ipq-wifi-qxwlan_e2600ac
 556 endef
 557 TARGET_DEVICES += qxwlan_e2600ac-c1
 558
 559 define Device/qxwlan_e2600ac-c2
 560         $(call Device/FitImage)
 561         $(call Device/UbiFit)
 562         DEVICE_VENDOR := Qxwlan
 563         DEVICE_MODEL := E2600AC
 564         DEVICE_VARIANT := C2
 565         SOC := qcom-ipq4019
 566         KERNEL_INSTALL := 1
 567         BLOCKSIZE := 128k
 568         PAGESIZE := 2048
 569         DEVICE_PACKAGES := ipq-wifi-qxwlan_e2600ac
 570 endef
 571 TARGET_DEVICES += qxwlan_e2600ac-c2
 572
 573 define Device/unielec_u4019-32m
 574         $(call Device/FitImage)
 575         DEVICE_VENDOR := Unielec
 576         DEVICE_MODEL := U4019
 577         DEVICE_VARIANT := 32M
 578         BOARD_NAME := u4019-32m
 579         SOC := qcom-ipq4019
 580         KERNEL_SIZE := 4096k
 581         IMAGE_SIZE := 31232k
 582         IMAGES := sysupgrade.bin
 583         IMAGE/sysupgrade.bin := append-kernel | append-rootfs | pad-rootfs | append-metadata
 584 endef
 585 TARGET_DEVICES += unielec_u4019-32m
 586
 587 define Device/zyxel_nbg6617
 588         $(call Device/FitImageLzma)
 589         DEVICE_VENDOR := ZyXEL
 590         DEVICE_MODEL := NBG6617
 591         SOC := qcom-ipq4018
 592         ROOTFS_SIZE := 24960k
 593         RAS_BOARD := NBG6617
 594         RAS_ROOTFS_SIZE := 19840k
 595         RAS_VERSION := "$(VERSION_DIST) $(REVISION)"
 596         IMAGE/sysupgrade.bin := append-kernel | append-rootfs | pad-rootfs | append-metadata
 597         IMAGES := sysupgrade.bin factory.bin
 598 #       The ZyXEL firmware allows flashing thru the web-gui only when the rootfs is
 599 #       at least as large as the one of the initial firmware image (not the current
 600 #       one on the device). This only applies to the Web-UI, the bootlaoder ignores
 601 #       this minimum-size. However, the larger image can be flashed both ways.
 602         IMAGE/factory.bin := append-rootfs | pad-rootfs | pad-to 64k | check-size $$$$(ROOTFS_SIZE) | zyxel-ras-image separate-kernel
 603         IMAGE/sysupgrade.bin/squashfs := append-rootfs | pad-rootfs | check-size $$$$(ROOTFS_SIZE) | sysupgrade-tar rootfs=$$$$@ | append-metadata
 604         DEVICE_PACKAGES := uboot-envtools kmod-usb-ledtrig-usbport
 605 endef
 606 TARGET_DEVICES += zyxel_nbg6617
 607
 608 define Device/zyxel_wre6606
 609         $(call Device/FitImage)
 610         DEVICE_VENDOR := ZyXEL
 611         DEVICE_MODEL := WRE6606
 612         DEVICE_DTS_CONFIG := config@4
 613         SOC := qcom-ipq4018
 614         IMAGES := sysupgrade.bin
 615         IMAGE/sysupgrade.bin := append-kernel | append-rootfs | pad-rootfs | append-metadata
 616         DEVICE_PACKAGES := -kmod-ath10k-ct kmod-ath10k-ct-smallbuffers
 617 endef
 618 TARGET_DEVICES += zyxel_wre6606
 619
 620 $(eval $(call BuildImage))