target/linux/ipq40xx/files-4.19/arch/arm/boot/dts/qcom-ipq4019-fritzrepeater-1200.dts

   1 // SPDX-License-Identifier: GPL-2.0-or-later OR MIT
   2
   3 #include "qcom-ipq4019.dtsi"
   4 #include <dt-bindings/gpio/gpio.h>
   5 #include <dt-bindings/input/input.h>
   6 #include <dt-bindings/soc/qcom,tcsr.h>
   7
   8 / {
   9         model = "AVM FRITZ!Repeater 1200";
  10         compatible = "avm,fritzrepeater-1200";
  11
  12         aliases {
  13                 led-boot = &power_green;
  14                 led-failsafe = &power_red;
  15                 led-running = &power_green;
  16                 led-upgrade = &power_red;
  17                 label-mac-device = &wifi0;
  18         };
  19
  20         soc {
  21                 rng@22000 {
  22                         status = "okay";
  23                 };
  24
  25                 mdio@90000 {
  26                         status = "okay";
  27                         pinctrl-0 = <&mdio_pins>;
  28                         pinctrl-names = "default";
  29                 };
  30
  31                 tcsr@1949000 {
  32                         compatible = "qcom,tcsr";
  33                         reg = <0x1949000 0x100>;
  34                         qcom,wifi_glb_cfg = <TCSR_WIFI_GLB_CFG>;
  35                 };
  36
  37                 ess_tcsr@1953000 {
  38                         compatible = "qcom,tcsr";
  39                         reg = <0x1953000 0x1000>;
  40                         qcom,ess-interface-select = <TCSR_ESS_PSGMII_RGMII5>;
  41                 };
  42
  43                 tcsr@1957000 {
  44                         compatible = "qcom,tcsr";
  45                         reg = <0x1957000 0x100>;
  46                         qcom,wifi_noc_memtype_m0_m2 = <TCSR_WIFI_NOC_MEMTYPE_M0_M2>;
  47                 };
  48
  49                 crypto@8e3a000 {
  50                         status = "okay";
  51                 };
  52
  53                 watchdog@b017000 {
  54                         status = "okay";
  55                 };
  56
  57                 ess-switch@c000000 {
  58                         switch_mac_mode = <0x3>; /* mac mode for RGMII RMII */
  59                         switch_lan_bmp = <0x0>; /* lan port bitmap */
  60                         switch_wan_bmp = <0x10>; /* wan port bitmap */
  61                 };
  62
  63                 edma@c080000 {
  64                         status = "okay";
  65                         phy-mode = "rgmii-rxid";
  66                         qcom,num_gmac = <1>;
  67                         qcom,single-phy;
  68                 };
  69         };
  70
  71         key {
  72                 compatible = "gpio-keys";
  73
  74                 wps {
  75                         label = "WPS button";
  76                         gpios = <&tlmm 10 GPIO_ACTIVE_LOW>;
  77                         linux,code = <KEY_WPS_BUTTON>;
  78                 };
  79         };
  80
  81         leds {
  82                 compatible = "gpio-leds";
  83
  84                 power_red: power_red {
  85                         label = "fritzwlan-1200:red:power";
  86                         gpios = <&tlmm 50 GPIO_ACTIVE_LOW>;
  87                 };
  88
  89                 power_green: power_green {
  90                         label = "fritzwlan-1200:green:power";
  91                         gpios = <&tlmm 45 GPIO_ACTIVE_HIGH>;
  92                 };
  93
  94                 power_yellow {
  95                         label = "fritzwlan-1200:yellow:power";
  96                         gpios = <&tlmm 49 GPIO_ACTIVE_LOW>;
  97                 };
  98         };
  99 };
 100
 101 &tlmm {
 102         serial_0_pins: serial_pinmux {
 103                 mux {
 104                         pins = "gpio16", "gpio17";
 105                         function = "blsp_uart0";
 106                         bias-disable;
 107                 };
 108         };
 109
 110         nand_pins: nand_pins {
 111                 pullups {
 112                         pins = "gpio53", "gpio58", "gpio59";
 113                         function = "qpic";
 114                         bias-pull-up;
 115                 };
 116
 117                 pulldowns {
 118                         pins = "gpio54", "gpio55", "gpio56",
 119                                 "gpio57", "gpio60", "gpio61",
 120                                 "gpio62", "gpio63", "gpio64",
 121                                 "gpio65", "gpio66", "gpio67",
 122                                 "gpio68", "gpio69";
 123                         function = "qpic";
 124                         bias-pull-down;
 125                 };
 126         };
 127
 128         mdio_pins: mdio_pinmux {
 129                 mux_1 {
 130                         pins = "gpio6";
 131                         function = "mdio";
 132                         bias-pull-up;
 133                 };
 134                 mux_2 {
 135                         pins = "gpio7";
 136                         function = "mdc";
 137                         bias-pull-up;
 138                 };
 139         };
 140
 141         phy-reset {
 142                 line-name = "PHY-reset";
 143                 gpios = <19 GPIO_ACTIVE_HIGH>;
 144                 gpio-hog;
 145                 output-high;
 146         };
 147
 148         phy-reset-2 {
 149                 line-name = "PHY-reset-2";
 150                 gpios = <47 GPIO_ACTIVE_HIGH>;
 151                 gpio-hog;
 152                 output-high;
 153         };
 154 };
 155
 156 &nand {
 157         pinctrl-0 = <&nand_pins>;
 158         pinctrl-names = "default";
 159         status = "okay";
 160
 161         nand@0 {
 162                 partitions {
 163                         compatible = "fixed-partitions";
 164                         #address-cells = <1>;
 165                         #size-cells = <1>;
 166
 167                         partition@0 {
 168                                 label = "SBL1";
 169                                 reg = <0x0 0x80000>;
 170                                 read-only;
 171                         };
 172
 173                         partition@80000 {
 174                                 label = "MIBIB";
 175                                 reg = <0x80000 0x80000>;
 176                                 read-only;
 177                         };
 178
 179                         partition@100000 {
 180                                 label = "QSEE";
 181                                 reg = <0x100000 0x80000>;
 182                                 read-only;
 183                         };
 184
 185                         partition@180000 {
 186                                 label = "CDT";
 187                                 reg = <0x180000 0x40000>;
 188                                 read-only;
 189                         };
 190
 191                         partition@1c0000 {
 192                                 label = "QSEE_B";
 193                                 reg = <0x1c0000 0x80000>;
 194                                 read-only;
 195                         };
 196
 197                         partition@240000 {
 198                                 label = "urlader0";
 199                                 reg = <0x240000 0x40000>;
 200                                 read-only;
 201                         };
 202
 203                         partition@280000 {
 204                                 label = "urlader1";
 205                                 reg = <0x280000 0x40000>;
 206                                 read-only;
 207                         };
 208
 209                         partition@2c0000 {
 210                                 label = "nand-tffs";
 211                                 reg = <0x2c0000 0x840000>;
 212                                 read-only;
 213                         };
 214
 215                         partition@b00000 {
 216                                 /* 'kernel1' in AVM firmware */
 217                                 label = "uboot0";
 218                                 reg = <0xb00000 0x400000>;
 219                         };
 220
 221                         partition@f00000 {
 222                                 /* 'kernel2' in AVM firmware */
 223                                 label = "uboot1";
 224                                 reg = <0xf00000 0x400000>;
 225                         };
 226
 227                         partition@1300000 {
 228                                 label = "ubi";
 229                                 reg = <0x1300000 0x6d00000>;
 230                         };
 231                 };
 232         };
 233 };
 234
 235 &cryptobam {
 236         status = "okay";
 237 };
 238
 239 &blsp_dma {
 240         status = "okay";
 241 };
 242
 243 &blsp1_uart1 {
 244         pinctrl-0 = <&serial_0_pins>;
 245         pinctrl-names = "default";
 246         status = "okay";
 247 };
 248
 249 &qpic_bam {
 250         status = "okay";
 251 };
 252
 253 &wifi0 {
 254         status = "okay";
 255         qcom,ath10k-calibration-variant = "AVM-FRITZRepeater-1200";
 256 };
 257
 258 &wifi1 {
 259         status = "okay";
 260         qcom,ath10k-calibration-variant = "AVM-FRITZRepeater-1200";
 261 };
 262
 263 &gmac0 {
 264         qcom,phy_mdio_addr = <0>;
 265         qcom,poll_required = <1>;
 266         vlan_tag = <0 0x20>;
 267 };