target/linux/ipq40xx/base-files/lib/preinit/05_set_iface_mac_ipq40xx.sh

   1 . /lib/functions.sh
   2
   3 preinit_set_mac_address() {
   4         case $(board_name) in
   5         asus,map-ac2200)
   6                 base_mac=$(mtd_get_mac_binary_ubi Factory 0x1006)
   7                 ip link set dev eth0 address $(macaddr_add "$base_mac" 1)
   8                 ip link set dev eth1 address $(macaddr_add "$base_mac" 3)
   9                 ;;
  10         asus,rt-ac42u)
  11                 base_mac=$(mtd_get_mac_binary_ubi Factory 0x1006)
  12                 ip link set dev eth0 address $base_mac
  13                 ip link set dev lan1 address $base_mac
  14                 ip link set dev lan2 address $base_mac
  15                 ip link set dev lan3 address $base_mac
  16                 ip link set dev lan4 address $base_mac
  17                 ip link set dev wan address $(mtd_get_mac_binary_ubi Factory 0x9006)
  18                 ;;
  19         engenius,eap2200)
  20                 base_mac=$(cat /sys/class/net/eth0/address)
  21                 ip link set dev eth1 address $(macaddr_add "$base_mac" 1)
  22                 ;;
  23         extreme-networks,ws-ap3915i)
  24                 ip link set dev eth0 address $(mtd_get_mac_ascii CFG1 ethaddr)
  25                 ;;
  26         linksys,ea8300|\
  27         linksys,mr8300)
  28                 base_mac=$(mtd_get_mac_ascii devinfo hw_mac_addr)
  29                 ip link set dev lan1 address $(macaddr_add "$base_mac" 1)
  30                 ip link set dev eth0 address $(macaddr_setbit "$base_mac" 7)
  31                 ;;
  32         openmesh,a42)
  33                 ip link set dev ethernet1 address $(mtd_get_mac_binary "0:ART" 0x0)
  34                 ip link set dev ethernet2 address $(mtd_get_mac_binary "0:ART" 0x6)
  35                 ;;
  36         mikrotik,wap-ac)
  37                 base_mac=$(cat /sys/firmware/mikrotik/hard_config/mac_base)
  38                 ip link set dev sw-eth1 address "$base_mac"
  39                 ip link set dev sw-eth2 address $(macaddr_add "$base_mac" 1)
  40                 ;;
  41         zyxel,nbg6617)
  42                 base_mac=$(cat /sys/class/net/eth0/address)
  43                 ip link set dev eth0 address $(macaddr_add "$base_mac" 2)
  44                 ip link set dev eth1 address $(macaddr_add "$base_mac" 3)
  45                 ;;
  46         esac
  47 }
  48
  49 boot_hook_add preinit_main preinit_set_mac_address