target/linux/ipq40xx/base-files/etc/hotplug.d/firmware/11-ath10k-caldata

   1 #!/bin/sh
   2
   3 [ -e /lib/firmware/$FIRMWARE ] && exit 0
   4
   5 . /lib/functions/caldata.sh
   6
   7 board=$(board_name)
   8
   9 case "$FIRMWARE" in
  10 "ath10k/cal-pci-0000:01:00.0.bin")
  11         case "$board" in
  12         meraki,mr33 |\
  13         meraki,mr74)
  14                 caldata_extract_ubi "ART" 0x9000 0x844
  15                 caldata_valid "4408" || caldata_extract "ART" 0x9000 0x844
  16                 ath10k_patch_mac $(macaddr_add $(get_mac_binary "/sys/bus/i2c/devices/0-0050/eeprom" 0x66) 1)
  17                 ;;
  18         esac
  19         ;;
  20 "ath10k/pre-cal-pci-0000:01:00.0.bin")
  21         case "$board" in
  22         asus,map-ac2200)
  23                 caldata_extract_ubi "Factory" 0x9000 0x2f20
  24                 ln -sf /lib/firmware/ath10k/pre-cal-pci-0000\:00\:00.0.bin \
  25                         /lib/firmware/ath10k/QCA9888/hw2.0/board.bin
  26                 ;;
  27         asus,rt-ac42u)
  28                 caldata_extract_ubi "Factory" 0x9000 0x2f20
  29                 ;;
  30         avm,fritzrepeater-3000)
  31                 /usr/bin/fritz_cal_extract -i 1 -s 0x3D000 -e 0x212 -l 12064 -o /lib/firmware/$FIRMWARE $(find_mtd_chardev "urlader0") || \
  32                 /usr/bin/fritz_cal_extract -i 1 -s 0x3C800 -e 0x212 -l 12064 -o /lib/firmware/$FIRMWARE $(find_mtd_chardev "urlader0") || \
  33                 /usr/bin/fritz_cal_extract -i 1 -s 0x3C000 -e 0x212 -l 12064 -o /lib/firmware/$FIRMWARE $(find_mtd_chardev "urlader0") || \
  34                 /usr/bin/fritz_cal_extract -i 1 -s 0x3D000 -e 0x212 -l 12064 -o /lib/firmware/$FIRMWARE $(find_mtd_chardev "urlader1") || \
  35                 /usr/bin/fritz_cal_extract -i 1 -s 0x3C800 -e 0x212 -l 12064 -o /lib/firmware/$FIRMWARE $(find_mtd_chardev "urlader1") || \
  36                 /usr/bin/fritz_cal_extract -i 1 -s 0x3C000 -e 0x212 -l 12064 -o /lib/firmware/$FIRMWARE $(find_mtd_chardev "urlader1")
  37                 ;;
  38         openmesh,a62 |\
  39         plasmacloud,pa2200)
  40                 caldata_extract "0:ART" 0x9000 0x2f20
  41                 ;;
  42         linksys,ea8300 |\
  43         linksys,mr8300)
  44                 caldata_extract "ART" 0x9000 0x2f20
  45                 # OEM assigns 4 sequential MACs
  46                 ath10k_patch_mac $(macaddr_setbit_la $(macaddr_add "$(cat /sys/class/net/eth0/address)" 4))
  47                 ;;
  48         netgear,rbr50|\
  49         netgear,rbs50|\
  50         netgear,srr60|\
  51         netgear,srs60)
  52                 caldata_extract_mmc "0:ART" 0x9000 0x2f20
  53                 ath10k_patch_mac $(mmc_get_mac_binary ARTMTD 0x12)
  54                 ;;
  55         esac
  56         ;;
  57 "ath10k/pre-cal-ahb-a000000.wifi.bin")
  58         case "$board" in
  59         qcom,ap-dk01.1-c1)
  60                 caldata_extract "ART" 0x1000 0x2f20
  61                 ;;
  62         asus,map-ac2200|\
  63         asus,rt-ac42u|\
  64         asus,rt-ac58u)
  65                 caldata_extract_ubi "Factory" 0x1000 0x2f20
  66                 ;;
  67         avm,fritzbox-4040)
  68                 /usr/bin/fritz_cal_extract -i 1 -s 0x400 -e 0x207 -l 12064 -o /lib/firmware/$FIRMWARE $(find_mtd_chardev "urlader_config")
  69                 ;;
  70         avm,fritzbox-7530 |\
  71         avm,fritzrepeater-1200 |\
  72         avm,fritzrepeater-3000)
  73                 /usr/bin/fritz_cal_extract -i 1 -s 0x3C000 -e 0x207 -l 12064 -o /lib/firmware/$FIRMWARE $(find_mtd_chardev "urlader0") || \
  74                 /usr/bin/fritz_cal_extract -i 1 -s 0x3C800 -e 0x207 -l 12064 -o /lib/firmware/$FIRMWARE $(find_mtd_chardev "urlader0") || \
  75                 /usr/bin/fritz_cal_extract -i 1 -s 0x3D000 -e 0x207 -l 12064 -o /lib/firmware/$FIRMWARE $(find_mtd_chardev "urlader0") || \
  76                 /usr/bin/fritz_cal_extract -i 1 -s 0x3C000 -e 0x207 -l 12064 -o /lib/firmware/$FIRMWARE $(find_mtd_chardev "urlader1") || \
  77                 /usr/bin/fritz_cal_extract -i 1 -s 0x3C800 -e 0x207 -l 12064 -o /lib/firmware/$FIRMWARE $(find_mtd_chardev "urlader1") || \
  78                 /usr/bin/fritz_cal_extract -i 1 -s 0x3D000 -e 0x207 -l 12064 -o /lib/firmware/$FIRMWARE $(find_mtd_chardev "urlader1")
  79                 ;;
  80         cellc,rtl30vw |\
  81         openmesh,a42 |\
  82         openmesh,a62 |\
  83         plasmacloud,pa1200 |\
  84         plasmacloud,pa2200)
  85                 caldata_extract "0:ART" 0x1000 0x2f20
  86                 ;;
  87         devolo,magic-2-wifi-next)
  88                 caldata_extract "ART" 0x1000 0x2f20
  89                 ath10k_patch_mac $(mtd_get_mac_ascii APPSBLENV WiFiMacAddress0)
  90                 ;;
  91         dlink,dap-2610)
  92                 caldata_extract "ART" 0x1000 0x2f20
  93                 ath10k_patch_mac $(mtd_get_mac_ascii bdcfg wlanmac)
  94                 ;;
  95         engenius,emd1)
  96                 caldata_extract "0:ART" 0x1000 0x2f20
  97                 ath10k_patch_mac $(mtd_get_mac_ascii 0:APPSBLENV wlanaddr)
  98                 ;;
  99         engenius,emr3500)
 100                 caldata_extract "0:ART" 0x1000 0x2f20
 101                 ath10k_patch_mac $(mtd_get_mac_ascii 0:APPSBLENV ethaddr)
 102                 ;;
 103         engenius,ens620ext)
 104                 caldata_extract "ART" 0x1000 0x2f20
 105                 ath10k_patch_mac $(macaddr_add $(mtd_get_mac_ascii u-boot-env ethaddr) 2)
 106                 ;;
 107         linksys,ea8300 |\
 108         linksys,mr8300)
 109                 caldata_extract "ART" 0x1000 0x2f20
 110                 ath10k_patch_mac $(macaddr_add "$(cat /sys/class/net/eth0/address)" 2)
 111                 ;;
 112         meraki,mr33 |\
 113         meraki,mr74)
 114                 caldata_extract_ubi "ART" 0x1000 0x2f20
 115                 caldata_valid "202f" || caldata_extract "ART" 0x1000 0x2f20
 116                 ath10k_patch_mac $(macaddr_add $(get_mac_binary "/sys/bus/i2c/devices/0-0050/eeprom" 0x66) 2)
 117                 ;;
 118         mikrotik,cap-ac |\
 119         mikrotik,hap-ac2 |\
 120         mikrotik,hap-ac3 |\
 121         mikrotik,wap-ac)
 122                 wlan_data="/sys/firmware/mikrotik/hard_config/wlan_data"
 123                 ( [ -f "$wlan_data" ] && caldata_sysfsload_from_file "$wlan_data" 0x0 0x2f20 ) || \
 124                 ( [ -d "$wlan_data" ] && caldata_sysfsload_from_file "$wlan_data/data_0" 0x0 0x2f20 )
 125                 ;;
 126         netgear,rbr50|\
 127         netgear,rbs50|\
 128         netgear,srr60|\
 129         netgear,srs60)
 130                 caldata_extract_mmc "0:ART" 0x1000 0x2f20
 131                 ath10k_patch_mac $(mmc_get_mac_binary ARTMTD 0x0)
 132                 ;;
 133         zyxel,nbg6617 |\
 134         zyxel,wre6606)
 135                 caldata_extract "ART" 0x1000 0x2f20
 136                 ath10k_patch_mac $(macaddr_add $(cat /sys/class/net/eth0/address) -2)
 137                 ;;
 138         esac
 139         ;;
 140 "ath10k/pre-cal-ahb-a800000.wifi.bin")
 141         case "$board" in
 142         qcom,ap-dk01.1-c1)
 143                 caldata_extract "ART" 0x5000 0x2f20
 144                 ;;
 145         asus,map-ac2200|\
 146         asus,rt-ac58u)
 147                 caldata_extract_ubi "Factory" 0x5000 0x2f20
 148                 ;;
 149         avm,fritzbox-4040)
 150                 /usr/bin/fritz_cal_extract -i 1 -s 0x400 -e 0x208 -l 12064 -o /lib/firmware/$FIRMWARE $(find_mtd_chardev "urlader_config")
 151                 ;;
 152         avm,fritzbox-7530 |\
 153         avm,fritzrepeater-1200 |\
 154         avm,fritzrepeater-3000)
 155                 /usr/bin/fritz_cal_extract -i 1 -s 0x3C800 -e 0x208 -l 12064 -o /lib/firmware/$FIRMWARE $(find_mtd_chardev "urlader0") || \
 156                 /usr/bin/fritz_cal_extract -i 1 -s 0x3D000 -e 0x208 -l 12064 -o /lib/firmware/$FIRMWARE $(find_mtd_chardev "urlader0") || \
 157                 /usr/bin/fritz_cal_extract -i 1 -s 0x3C000 -e 0x208 -l 12064 -o /lib/firmware/$FIRMWARE $(find_mtd_chardev "urlader0") || \
 158                 /usr/bin/fritz_cal_extract -i 1 -s 0x3C800 -e 0x208 -l 12064 -o /lib/firmware/$FIRMWARE $(find_mtd_chardev "urlader1") || \
 159                 /usr/bin/fritz_cal_extract -i 1 -s 0x3D000 -e 0x208 -l 12064 -o /lib/firmware/$FIRMWARE $(find_mtd_chardev "urlader1") || \
 160                 /usr/bin/fritz_cal_extract -i 1 -s 0x3C000 -e 0x208 -l 12064 -o /lib/firmware/$FIRMWARE $(find_mtd_chardev "urlader1")
 161                 ;;
 162         cellc,rtl30vw |\
 163         openmesh,a42 |\
 164         openmesh,a62 |\
 165         plasmacloud,pa1200 |\
 166         plasmacloud,pa2200)
 167                 caldata_extract "0:ART" 0x5000 0x2f20
 168                 ;;
 169         devolo,magic-2-wifi-next)
 170                 caldata_extract "ART" 0x5000 0x2f20
 171                 ath10k_patch_mac $(mtd_get_mac_ascii APPSBLENV WiFiMacAddress1)
 172                 ;;
 173         dlink,dap-2610)
 174                 caldata_extract "ART" 0x5000 0x2f20
 175                 ath10k_patch_mac $(mtd_get_mac_ascii bdcfg wlanmac_a)
 176                 ;;
 177         engenius,emd1)
 178                 caldata_extract "0:ART" 0x5000 0x2f20
 179                 ath10k_patch_mac $(macaddr_add $(mtd_get_mac_ascii 0:APPSBLENV wlanaddr) 1)
 180                 ;;
 181         engenius,emr3500)
 182                 caldata_extract "0:ART" 0x5000 0x2f20
 183                 ath10k_patch_mac $(macaddr_add $(mtd_get_mac_ascii 0:APPSBLENV ethaddr) 1)
 184                 ;;
 185         engenius,ens620ext)
 186                 caldata_extract "ART" 0x5000 0x2f20
 187                 ath10k_patch_mac $(macaddr_add $(mtd_get_mac_ascii u-boot-env ethaddr) 3)
 188                 ;;
 189         linksys,ea8300 |\
 190         linksys,mr8300)
 191                 caldata_extract "ART" 0x5000 0x2f20
 192                 ath10k_patch_mac $(macaddr_add "$(cat /sys/class/net/eth0/address)" 3)
 193                 ;;
 194         meraki,mr33 |\
 195         meraki,mr74)
 196                 caldata_extract_ubi "ART" 0x5000 0x2f20
 197                 caldata_valid "202f" || caldata_extract "ART" 0x5000 0x2f20
 198                 ath10k_patch_mac $(macaddr_add $(get_mac_binary "/sys/bus/i2c/devices/0-0050/eeprom" 0x66) 3)
 199                 ;;
 200         mikrotik,cap-ac |\
 201         mikrotik,hap-ac2 |\
 202         mikrotik,hap-ac3 |\
 203         mikrotik,sxtsq-5-ac |\
 204         mikrotik,wap-ac)
 205                 wlan_data="/sys/firmware/mikrotik/hard_config/wlan_data"
 206                 ( [ -f "$wlan_data" ] && caldata_sysfsload_from_file "$wlan_data" 0x8000 0x2f20 ) || \
 207                 ( [ -d "$wlan_data" ] && caldata_sysfsload_from_file "$wlan_data/data_2" 0x0 0x2f20 )
 208                 ;;
 209         netgear,rbr50|\
 210         netgear,rbs50|\
 211         netgear,srr60|\
 212         netgear,srs60)
 213                 caldata_extract_mmc "0:ART" 0x5000 0x2f20
 214                 ath10k_patch_mac $(mmc_get_mac_binary ARTMTD 0xc)
 215                 ;;
 216         zyxel,nbg6617 |\
 217         zyxel,wre6606)
 218                 caldata_extract "ART" 0x5000 0x2f20
 219                 ath10k_patch_mac $(macaddr_add $(cat /sys/class/net/eth0/address) -1)
 220                 ;;
 221         esac
 222         ;;
 223 "ath10k/QCA4019/hw1.0/board-ahb-a000000.wifi.bin")
 224         case "$board" in
 225         mikrotik,cap-ac |\
 226         mikrotik,hap-ac2 |\
 227         mikrotik,hap-ac3 |\
 228         mikrotik,wap-ac)
 229                 wlan_data="/sys/firmware/mikrotik/hard_config/wlan_data"
 230                 ( [ -f "$wlan_data" ] && caldata_sysfsload_from_file "$wlan_data" 0x2f20 0x2f20 ) || \
 231                 ( [ -d "$wlan_data" ] && caldata_sysfsload_from_file "$wlan_data/data_0" 0x2f20 0x2f20 )
 232                 ;;
 233         esac
 234         ;;
 235 "ath10k/QCA4019/hw1.0/board-ahb-a800000.wifi.bin")
 236         case "$board" in
 237         mikrotik,cap-ac |\
 238         mikrotik,hap-ac2 |\
 239         mikrotik,hap-ac3 |\
 240         mikrotik,sxtsq-5-ac |\
 241         mikrotik,wap-ac)
 242                 wlan_data="/sys/firmware/mikrotik/hard_config/wlan_data"
 243                 ( [ -f "$wlan_data" ] && caldata_sysfsload_from_file "$wlan_data" 0xaf20 0x2f20 ) || \
 244                 ( [ -d "$wlan_data" ] && caldata_sysfsload_from_file "$wlan_data/data_2" 0x2f20 0x2f20 )
 245                 ;;
 246         esac
 247         ;;
 248 *)
 249         exit 1
 250         ;;
 251 esac