target/linux/ipq40xx/base-files/etc/hotplug.d/firmware/11-ath10k-caldata

   1 #!/bin/sh
   2
   3 [ -e /lib/firmware/$FIRMWARE ] && exit 0
   4
   5 . /lib/functions/caldata.sh
   6
   7 board=$(board_name)
   8
   9 case "$FIRMWARE" in
  10 "ath10k/cal-pci-0000:01:00.0.bin")
  11         case "$board" in
  12         meraki,mr33)
  13                 caldata_extract_ubi "ART" 0x9000 0x844
  14                 caldata_valid "4408" || caldata_extract "ART" 0x9000 0x844
  15                 ath10k_patch_mac $(macaddr_add $(get_mac_binary "/sys/bus/i2c/devices/0-0050/eeprom" 0x66) 1)
  16                 ;;
  17         esac
  18         ;;
  19 "ath10k/pre-cal-pci-0000:01:00.0.bin")
  20         case "$board" in
  21         asus,map-ac2200)
  22                 caldata_extract_ubi "Factory" 0x9000 0x2f20
  23                 ln -sf /lib/firmware/ath10k/pre-cal-pci-0000\:00\:00.0.bin \
  24                         /lib/firmware/ath10k/QCA9888/hw2.0/board.bin
  25                 ;;
  26         asus,rt-ac42u)
  27                 caldata_extract_ubi "Factory" 0x9000 0x2f20
  28                 ;;
  29         avm,fritzrepeater-3000)
  30                 /usr/bin/fritz_cal_extract -i 1 -s 0x3D000 -e 0x212 -l 12064 -o /lib/firmware/$FIRMWARE $(find_mtd_chardev "urlader0") || \
  31                 /usr/bin/fritz_cal_extract -i 1 -s 0x3C800 -e 0x212 -l 12064 -o /lib/firmware/$FIRMWARE $(find_mtd_chardev "urlader0") || \
  32                 /usr/bin/fritz_cal_extract -i 1 -s 0x3C000 -e 0x212 -l 12064 -o /lib/firmware/$FIRMWARE $(find_mtd_chardev "urlader0") || \
  33                 /usr/bin/fritz_cal_extract -i 1 -s 0x3D000 -e 0x212 -l 12064 -o /lib/firmware/$FIRMWARE $(find_mtd_chardev "urlader1") || \
  34                 /usr/bin/fritz_cal_extract -i 1 -s 0x3C800 -e 0x212 -l 12064 -o /lib/firmware/$FIRMWARE $(find_mtd_chardev "urlader1") || \
  35                 /usr/bin/fritz_cal_extract -i 1 -s 0x3C000 -e 0x212 -l 12064 -o /lib/firmware/$FIRMWARE $(find_mtd_chardev "urlader1")
  36                 ;;
  37         openmesh,a62 |\
  38         plasmacloud,pa2200)
  39                 caldata_extract "0:ART" 0x9000 0x2f20
  40                 ;;
  41         linksys,ea8300 |\
  42         linksys,mr8300)
  43                 caldata_extract "ART" 0x9000 0x2f20
  44                 # OEM assigns 4 sequential MACs
  45                 ath10k_patch_mac $(macaddr_setbit_la $(macaddr_add "$(cat /sys/class/net/eth0/address)" 4))
  46                 ;;
  47         netgear,rbr50|\
  48         netgear,rbs50|\
  49         netgear,srr60|\
  50         netgear,srs60)
  51                 caldata_extract_mmc "0:ART" 0x9000 0x2f20
  52                 ath10k_patch_mac $(mmc_get_mac_binary ARTMTD 0x12)
  53                 ;;
  54         esac
  55         ;;
  56 "ath10k/pre-cal-ahb-a000000.wifi.bin")
  57         case "$board" in
  58         qcom,ap-dk01.1-c1)
  59                 caldata_extract "ART" 0x1000 0x2f20
  60                 ;;
  61         asus,map-ac2200|\
  62         asus,rt-ac42u|\
  63         asus,rt-ac58u)
  64                 caldata_extract_ubi "Factory" 0x1000 0x2f20
  65                 ;;
  66         avm,fritzbox-4040)
  67                 /usr/bin/fritz_cal_extract -i 1 -s 0x400 -e 0x207 -l 12064 -o /lib/firmware/$FIRMWARE $(find_mtd_chardev "urlader_config")
  68                 ;;
  69         avm,fritzbox-7530 |\
  70         avm,fritzrepeater-1200 |\
  71         avm,fritzrepeater-3000)
  72                 /usr/bin/fritz_cal_extract -i 1 -s 0x3C000 -e 0x207 -l 12064 -o /lib/firmware/$FIRMWARE $(find_mtd_chardev "urlader0") || \
  73                 /usr/bin/fritz_cal_extract -i 1 -s 0x3C800 -e 0x207 -l 12064 -o /lib/firmware/$FIRMWARE $(find_mtd_chardev "urlader0") || \
  74                 /usr/bin/fritz_cal_extract -i 1 -s 0x3D000 -e 0x207 -l 12064 -o /lib/firmware/$FIRMWARE $(find_mtd_chardev "urlader0") || \
  75                 /usr/bin/fritz_cal_extract -i 1 -s 0x3C000 -e 0x207 -l 12064 -o /lib/firmware/$FIRMWARE $(find_mtd_chardev "urlader1") || \
  76                 /usr/bin/fritz_cal_extract -i 1 -s 0x3C800 -e 0x207 -l 12064 -o /lib/firmware/$FIRMWARE $(find_mtd_chardev "urlader1") || \
  77                 /usr/bin/fritz_cal_extract -i 1 -s 0x3D000 -e 0x207 -l 12064 -o /lib/firmware/$FIRMWARE $(find_mtd_chardev "urlader1")
  78                 ;;
  79         openmesh,a42 |\
  80         openmesh,a62 |\
  81         plasmacloud,pa1200 |\
  82         plasmacloud,pa2200)
  83                 caldata_extract "0:ART" 0x1000 0x2f20
  84                 ;;
  85         devolo,magic-2-wifi-next)
  86                 caldata_extract "ART" 0x1000 0x2f20
  87                 ath10k_patch_mac $(mtd_get_mac_ascii APPSBLENV WiFiMacAddress0)
  88                 ;;
  89         dlink,dap-2610)
  90                 caldata_extract "ART" 0x1000 0x2f20
  91                 ath10k_patch_mac $(mtd_get_mac_ascii bdcfg wlanmac)
  92                 ;;
  93         engenius,emd1)
  94                 caldata_extract "0:ART" 0x1000 0x2f20
  95                 ath10k_patch_mac $(mtd_get_mac_ascii 0:APPSBLENV wlanaddr)
  96                 ;;
  97         engenius,emr3500)
  98                 caldata_extract "0:ART" 0x1000 0x2f20
  99                 ath10k_patch_mac $(mtd_get_mac_ascii 0:APPSBLENV ethaddr)
 100                 ;;
 101         engenius,ens620ext)
 102                 caldata_extract "ART" 0x1000 0x2f20
 103                 ath10k_patch_mac $(macaddr_add $(mtd_get_mac_ascii u-boot-env ethaddr) 2)
 104                 ;;
 105         linksys,ea8300 |\
 106         linksys,mr8300)
 107                 caldata_extract "ART" 0x1000 0x2f20
 108                 ath10k_patch_mac $(macaddr_add "$(cat /sys/class/net/eth0/address)" 2)
 109                 ;;
 110         meraki,mr33)
 111                 caldata_extract_ubi "ART" 0x1000 0x2f20
 112                 caldata_valid "202f" || caldata_extract "ART" 0x1000 0x2f20
 113                 ath10k_patch_mac $(macaddr_add $(get_mac_binary "/sys/bus/i2c/devices/0-0050/eeprom" 0x66) 2)
 114                 ;;
 115         mikrotik,cap-ac |\
 116         mikrotik,hap-ac2 |\
 117         mikrotik,hap-ac3)
 118                 wlan_data="/sys/firmware/mikrotik/hard_config/wlan_data"
 119                 ( [ -f "$wlan_data" ] && caldata_sysfsload_from_file "$wlan_data" 0x0 0x2f20 ) || \
 120                 ( [ -d "$wlan_data" ] && caldata_sysfsload_from_file "$wlan_data/data_0" 0x0 0x2f20 )
 121                 ;;
 122         netgear,rbr50|\
 123         netgear,rbs50|\
 124         netgear,srr60|\
 125         netgear,srs60)
 126                 caldata_extract_mmc "0:ART" 0x1000 0x2f20
 127                 ath10k_patch_mac $(mmc_get_mac_binary ARTMTD 0x0)
 128                 ;;
 129         zyxel,nbg6617 |\
 130         zyxel,wre6606)
 131                 caldata_extract "ART" 0x1000 0x2f20
 132                 ath10k_patch_mac $(macaddr_add $(cat /sys/class/net/eth0/address) -2)
 133                 ;;
 134         esac
 135         ;;
 136 "ath10k/pre-cal-ahb-a800000.wifi.bin")
 137         case "$board" in
 138         qcom,ap-dk01.1-c1)
 139                 caldata_extract "ART" 0x5000 0x2f20
 140                 ;;
 141         asus,map-ac2200|\
 142         asus,rt-ac58u)
 143                 caldata_extract_ubi "Factory" 0x5000 0x2f20
 144                 ;;
 145         avm,fritzbox-4040)
 146                 /usr/bin/fritz_cal_extract -i 1 -s 0x400 -e 0x208 -l 12064 -o /lib/firmware/$FIRMWARE $(find_mtd_chardev "urlader_config")
 147                 ;;
 148         avm,fritzbox-7530 |\
 149         avm,fritzrepeater-1200 |\
 150         avm,fritzrepeater-3000)
 151                 /usr/bin/fritz_cal_extract -i 1 -s 0x3C800 -e 0x208 -l 12064 -o /lib/firmware/$FIRMWARE $(find_mtd_chardev "urlader0") || \
 152                 /usr/bin/fritz_cal_extract -i 1 -s 0x3D000 -e 0x208 -l 12064 -o /lib/firmware/$FIRMWARE $(find_mtd_chardev "urlader0") || \
 153                 /usr/bin/fritz_cal_extract -i 1 -s 0x3C000 -e 0x208 -l 12064 -o /lib/firmware/$FIRMWARE $(find_mtd_chardev "urlader0") || \
 154                 /usr/bin/fritz_cal_extract -i 1 -s 0x3C800 -e 0x208 -l 12064 -o /lib/firmware/$FIRMWARE $(find_mtd_chardev "urlader1") || \
 155                 /usr/bin/fritz_cal_extract -i 1 -s 0x3D000 -e 0x208 -l 12064 -o /lib/firmware/$FIRMWARE $(find_mtd_chardev "urlader1") || \
 156                 /usr/bin/fritz_cal_extract -i 1 -s 0x3C000 -e 0x208 -l 12064 -o /lib/firmware/$FIRMWARE $(find_mtd_chardev "urlader1")
 157                 ;;
 158         openmesh,a42 |\
 159         openmesh,a62 |\
 160         plasmacloud,pa1200 |\
 161         plasmacloud,pa2200)
 162                 caldata_extract "0:ART" 0x5000 0x2f20
 163                 ;;
 164         devolo,magic-2-wifi-next)
 165                 caldata_extract "ART" 0x5000 0x2f20
 166                 ath10k_patch_mac $(mtd_get_mac_ascii APPSBLENV WiFiMacAddress1)
 167                 ;;
 168         dlink,dap-2610)
 169                 caldata_extract "ART" 0x5000 0x2f20
 170                 ath10k_patch_mac $(mtd_get_mac_ascii bdcfg wlanmac_a)
 171                 ;;
 172         engenius,emd1)
 173                 caldata_extract "0:ART" 0x5000 0x2f20
 174                 ath10k_patch_mac $(macaddr_add $(mtd_get_mac_ascii 0:APPSBLENV wlanaddr) 1)
 175                 ;;
 176         engenius,emr3500)
 177                 caldata_extract "0:ART" 0x5000 0x2f20
 178                 ath10k_patch_mac $(macaddr_add $(mtd_get_mac_ascii 0:APPSBLENV ethaddr) 1)
 179                 ;;
 180         engenius,ens620ext)
 181                 caldata_extract "ART" 0x5000 0x2f20
 182                 ath10k_patch_mac $(macaddr_add $(mtd_get_mac_ascii u-boot-env ethaddr) 3)
 183                 ;;
 184         linksys,ea8300 |\
 185         linksys,mr8300)
 186                 caldata_extract "ART" 0x5000 0x2f20
 187                 ath10k_patch_mac $(macaddr_add "$(cat /sys/class/net/eth0/address)" 3)
 188                 ;;
 189         meraki,mr33)
 190                 caldata_extract_ubi "ART" 0x5000 0x2f20
 191                 caldata_valid "202f" || caldata_extract "ART" 0x5000 0x2f20
 192                 ath10k_patch_mac $(macaddr_add $(get_mac_binary "/sys/bus/i2c/devices/0-0050/eeprom" 0x66) 3)
 193                 ;;
 194         mikrotik,cap-ac |\
 195         mikrotik,hap-ac2 |\
 196         mikrotik,hap-ac3 |\
 197         mikrotik,sxtsq-5-ac)
 198                 wlan_data="/sys/firmware/mikrotik/hard_config/wlan_data"
 199                 ( [ -f "$wlan_data" ] && caldata_sysfsload_from_file "$wlan_data" 0x8000 0x2f20 ) || \
 200                 ( [ -d "$wlan_data" ] && caldata_sysfsload_from_file "$wlan_data/data_2" 0x0 0x2f20 )
 201                 ;;
 202         netgear,rbr50|\
 203         netgear,rbs50|\
 204         netgear,srr60|\
 205         netgear,srs60)
 206                 caldata_extract_mmc "0:ART" 0x5000 0x2f20
 207                 ath10k_patch_mac $(mmc_get_mac_binary ARTMTD 0xc)
 208                 ;;
 209         zyxel,nbg6617 |\
 210         zyxel,wre6606)
 211                 caldata_extract "ART" 0x5000 0x2f20
 212                 ath10k_patch_mac $(macaddr_add $(cat /sys/class/net/eth0/address) -1)
 213                 ;;
 214         esac
 215         ;;
 216 *)
 217         exit 1
 218         ;;
 219 esac