target/linux/generic-2.6/files/drivers/net/phy/rtl8306.c

   1 /*
   2  * rtl8306.c: RTL8306S switch driver
   3  *
   4  * Copyright (C) 2009 Felix Fietkau <nbd@openwrt.org>
   5  *
   6  * This program is free software; you can redistribute it and/or
   7  * modify it under the terms of the GNU General Public License
   8  * version 2 as published by the Free Software Foundation.
   9  *
  10  * This program is distributed in the hope that it will be useful,
  11  * but WITHOUT ANY WARRANTY; without even the implied warranty of
  12  * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
  13  * GNU General Public License for more details.
  14  */
  15
  16 #include <linux/if.h>
  17 #include <linux/module.h>
  18 #include <linux/init.h>
  19 #include <linux/list.h>
  20 #include <linux/if_ether.h>
  21 #include <linux/skbuff.h>
  22 #include <linux/netdevice.h>
  23 #include <linux/netlink.h>
  24 #include <net/genetlink.h>
  25 #include <linux/switch.h>
  26 #include <linux/delay.h>
  27 #include <linux/phy.h>
  28
  29 //#define DEBUG 1
  30
  31 /* Global (PHY0) */
  32 #define RTL8306_REG_PAGE                16
  33 #define RTL8306_REG_PAGE_LO             (1 << 15)
  34 #define RTL8306_REG_PAGE_HI             (1 << 1) /* inverted */
  35
  36 #define RTL8306_NUM_VLANS               16
  37 #define RTL8306_NUM_PORTS               6
  38 #define RTL8306_PORT_CPU                5
  39 #define RTL8306_NUM_PAGES               4
  40 #define RTL8306_NUM_REGS                32
  41
  42 #define RTL_NAME_S          "RTL8306S"
  43 #define RTL_NAME_SD         "RTL8306SD"
  44 #define RTL_NAME_SDM        "RTL8306SDM"
  45 #define RTL_NAME_UNKNOWN    "RTL8306(unknown)"
  46
  47 #define RTL8306_MAGIC   0x8306
  48
  49 struct rtl_priv {
  50         struct switch_dev dev;
  51         int page;
  52         int type;
  53         int do_cpu;
  54         struct mii_bus *bus;
  55         char hwname[sizeof(RTL_NAME_UNKNOWN)];
  56
  57         /* temporary register saves for port operations */
  58         int tmp_speed;
  59         int tmp_nway;
  60         int tmp_duplex;
  61 };
  62
  63 #define to_rtl(_dev) container_of(_dev, struct rtl_priv, dev)
  64
  65 enum {
  66         RTL_TYPE_S,
  67         RTL_TYPE_SD,
  68         RTL_TYPE_SDM,
  69 };
  70
  71 struct rtl_reg {
  72         int page;
  73         int phy;
  74         int reg;
  75         int bits;
  76         int shift;
  77         int inverted;
  78 };
  79
  80 #define RTL_VLAN_REGOFS(name) \
  81         (RTL_REG_VLAN1_##name - RTL_REG_VLAN0_##name)
  82
  83 #define RTL_PORT_REGOFS(name) \
  84         (RTL_REG_PORT1_##name - RTL_REG_PORT0_##name)
  85
  86 #define RTL_PORT_REG(id, reg) \
  87         (RTL_REG_PORT0_##reg + (id * RTL_PORT_REGOFS(reg)))
  88
  89 #define RTL_VLAN_REG(id, reg) \
  90         (RTL_REG_VLAN0_##reg + (id * RTL_VLAN_REGOFS(reg)))
  91
  92 #define RTL_GLOBAL_REGATTR(reg) \
  93         .id = RTL_REG_##reg, \
  94         .type = SWITCH_TYPE_INT, \
  95         .ofs = 0, \
  96         .set = rtl_attr_set_int, \
  97         .get = rtl_attr_get_int
  98
  99 #define RTL_PORT_REGATTR(reg) \
 100         .id = RTL_REG_PORT0_##reg, \
 101         .type = SWITCH_TYPE_INT, \
 102         .ofs = RTL_PORT_REGOFS(reg), \
 103         .set = rtl_attr_set_port_int, \
 104         .get = rtl_attr_get_port_int
 105
 106 #define RTL_VLAN_REGATTR(reg) \
 107         .id = RTL_REG_VLAN0_##reg, \
 108         .type = SWITCH_TYPE_INT, \
 109         .ofs = RTL_VLAN_REGOFS(reg), \
 110         .set = rtl_attr_set_vlan_int, \
 111         .get = rtl_attr_get_vlan_int
 112
 113 enum rtl_regidx {
 114         RTL_REG_CHIPID,
 115         RTL_REG_CHIPVER,
 116         RTL_REG_CHIPTYPE,
 117         RTL_REG_CPUPORT,
 118
 119         RTL_REG_EN_CPUPORT,
 120         RTL_REG_EN_TAG_OUT,
 121         RTL_REG_EN_TAG_CLR,
 122         RTL_REG_EN_TAG_IN,
 123         RTL_REG_TRAP_CPU,
 124         RTL_REG_TRUNK_PORTSEL,
 125         RTL_REG_EN_TRUNK,
 126         RTL_REG_RESET,
 127
 128         RTL_REG_VLAN_ENABLE,
 129         RTL_REG_VLAN_FILTER,
 130         RTL_REG_VLAN_TAG_ONLY,
 131         RTL_REG_VLAN_TAG_AWARE,
 132 #define RTL_VLAN_ENUM(id) \
 133         RTL_REG_VLAN##id##_VID, \
 134         RTL_REG_VLAN##id##_PORTMASK
 135         RTL_VLAN_ENUM(0),
 136         RTL_VLAN_ENUM(1),
 137         RTL_VLAN_ENUM(2),
 138         RTL_VLAN_ENUM(3),
 139         RTL_VLAN_ENUM(4),
 140         RTL_VLAN_ENUM(5),
 141         RTL_VLAN_ENUM(6),
 142         RTL_VLAN_ENUM(7),
 143         RTL_VLAN_ENUM(8),
 144         RTL_VLAN_ENUM(9),
 145         RTL_VLAN_ENUM(10),
 146         RTL_VLAN_ENUM(11),
 147         RTL_VLAN_ENUM(12),
 148         RTL_VLAN_ENUM(13),
 149         RTL_VLAN_ENUM(14),
 150         RTL_VLAN_ENUM(15),
 151 #define RTL_PORT_ENUM(id) \
 152         RTL_REG_PORT##id##_PVID, \
 153         RTL_REG_PORT##id##_NULL_VID_REPLACE, \
 154         RTL_REG_PORT##id##_NON_PVID_DISCARD, \
 155         RTL_REG_PORT##id##_VID_INSERT, \
 156         RTL_REG_PORT##id##_TAG_INSERT, \
 157         RTL_REG_PORT##id##_LINK, \
 158         RTL_REG_PORT##id##_SPEED, \
 159         RTL_REG_PORT##id##_NWAY, \
 160         RTL_REG_PORT##id##_DUPLEX, \
 161         RTL_REG_PORT##id##_RXEN, \
 162         RTL_REG_PORT##id##_TXEN
 163         RTL_PORT_ENUM(0),
 164         RTL_PORT_ENUM(1),
 165         RTL_PORT_ENUM(2),
 166         RTL_PORT_ENUM(3),
 167         RTL_PORT_ENUM(4),
 168         RTL_PORT_ENUM(5),
 169 };
 170
 171 static const struct rtl_reg rtl_regs[] = {
 172         [RTL_REG_CHIPID]         = { 0, 4, 30, 16,  0, 0 },
 173         [RTL_REG_CHIPVER]        = { 0, 4, 31,  8,  0, 0 },
 174         [RTL_REG_CHIPTYPE]       = { 0, 4, 31,  2,  8, 0 },
 175
 176         /* CPU port number */
 177         [RTL_REG_CPUPORT]        = { 2, 4, 21,  3,  0, 0 },
 178         /* Enable CPU port function */
 179         [RTL_REG_EN_CPUPORT]     = { 3, 2, 21,  1, 15, 1 },
 180         /* Enable CPU port tag insertion */
 181         [RTL_REG_EN_TAG_OUT]     = { 3, 2, 21,  1, 12, 0 },
 182         /* Enable CPU port tag removal */
 183         [RTL_REG_EN_TAG_CLR]     = { 3, 2, 21,  1, 11, 0 },
 184         /* Enable CPU port tag checking */
 185         [RTL_REG_EN_TAG_IN]      = { 0, 4, 21,  1,  7, 0 },
 186         [RTL_REG_EN_TRUNK]       = { 0, 0, 19,  1, 11, 1 },
 187         [RTL_REG_TRUNK_PORTSEL]  = { 0, 0, 16,  1,  6, 1 },
 188         [RTL_REG_RESET]          = { 0, 0, 16,  1, 12, 0 },
 189
 190         [RTL_REG_TRAP_CPU]       = { 3, 2, 22,  1,  6, 0 },
 191
 192         [RTL_REG_VLAN_TAG_ONLY]  = { 0, 0, 16,  1,  8, 1 },
 193         [RTL_REG_VLAN_FILTER]    = { 0, 0, 16,  1,  9, 1 },
 194         [RTL_REG_VLAN_TAG_AWARE] = { 0, 0, 16,  1, 10, 1 },
 195         [RTL_REG_VLAN_ENABLE]    = { 0, 0, 18,  1,  8, 1 },
 196
 197 #define RTL_VLAN_REGS(id, phy, page, regofs) \
 198         [RTL_REG_VLAN##id##_VID] = { page, phy, 25 + regofs, 12, 0, 0 }, \
 199         [RTL_REG_VLAN##id##_PORTMASK] = { page, phy, 24 + regofs, 6, 0, 0 }
 200         RTL_VLAN_REGS( 0, 0, 0, 0),
 201         RTL_VLAN_REGS( 1, 1, 0, 0),
 202         RTL_VLAN_REGS( 2, 2, 0, 0),
 203         RTL_VLAN_REGS( 3, 3, 0, 0),
 204         RTL_VLAN_REGS( 4, 4, 0, 0),
 205         RTL_VLAN_REGS( 5, 0, 1, 2),
 206         RTL_VLAN_REGS( 6, 1, 1, 2),
 207         RTL_VLAN_REGS( 7, 2, 1, 2),
 208         RTL_VLAN_REGS( 8, 3, 1, 2),
 209         RTL_VLAN_REGS( 9, 4, 1, 2),
 210         RTL_VLAN_REGS(10, 0, 1, 4),
 211         RTL_VLAN_REGS(11, 1, 1, 4),
 212         RTL_VLAN_REGS(12, 2, 1, 4),
 213         RTL_VLAN_REGS(13, 3, 1, 4),
 214         RTL_VLAN_REGS(14, 4, 1, 4),
 215         RTL_VLAN_REGS(15, 0, 1, 6),
 216
 217 #define REG_PORT_SETTING(port, phy) \
 218         [RTL_REG_PORT##port##_SPEED] = { 0, phy, 0, 1, 13, 0 }, \
 219         [RTL_REG_PORT##port##_NWAY] = { 0, phy, 0, 1, 12, 0 }, \
 220         [RTL_REG_PORT##port##_DUPLEX] = { 0, phy, 0, 1, 8, 0 }, \
 221         [RTL_REG_PORT##port##_TXEN] = { 0, phy, 24, 1, 11, 0 }, \
 222         [RTL_REG_PORT##port##_RXEN] = { 0, phy, 24, 1, 10, 0 }, \
 223         [RTL_REG_PORT##port##_LINK] = { 0, phy, 1, 1, 2, 0 }, \
 224         [RTL_REG_PORT##port##_NULL_VID_REPLACE] = { 0, phy, 22, 1, 12, 0 }, \
 225         [RTL_REG_PORT##port##_NON_PVID_DISCARD] = { 0, phy, 22, 1, 11, 0 }, \
 226         [RTL_REG_PORT##port##_VID_INSERT] = { 0, phy, 22, 2, 9, 0 }, \
 227         [RTL_REG_PORT##port##_TAG_INSERT] = { 0, phy, 22, 2, 0, 0 }
 228
 229         REG_PORT_SETTING(0, 0),
 230         REG_PORT_SETTING(1, 1),
 231         REG_PORT_SETTING(2, 2),
 232         REG_PORT_SETTING(3, 3),
 233         REG_PORT_SETTING(4, 4),
 234         REG_PORT_SETTING(5, 6),
 235
 236 #define REG_PORT_PVID(phy, page, regofs) \
 237         { page, phy, 24 + regofs, 4, 12, 0 }
 238         [RTL_REG_PORT0_PVID] = REG_PORT_PVID(0, 0, 0),
 239         [RTL_REG_PORT1_PVID] = REG_PORT_PVID(1, 0, 0),
 240         [RTL_REG_PORT2_PVID] = REG_PORT_PVID(2, 0, 0),
 241         [RTL_REG_PORT3_PVID] = REG_PORT_PVID(3, 0, 0),
 242         [RTL_REG_PORT4_PVID] = REG_PORT_PVID(4, 0, 0),
 243         [RTL_REG_PORT5_PVID] = REG_PORT_PVID(0, 1, 2),
 244 };
 245
 246
 247 /* IFXMIPS compat stuff - remove after PHY layer migration */
 248 static struct switch_dev rtldev;
 249 /* END IFXMIPS compat stuff */
 250
 251
 252 static inline void
 253 rtl_set_page(struct rtl_priv *priv, unsigned int page)
 254 {
 255         struct mii_bus *bus = priv->bus;
 256         u16 pgsel;
 257
 258         if (priv->page == page)
 259                 return;
 260
 261         BUG_ON(page > RTL8306_NUM_PAGES);
 262         pgsel = bus->read(bus, 0, RTL8306_REG_PAGE);
 263         pgsel &= ~(RTL8306_REG_PAGE_LO | RTL8306_REG_PAGE_HI);
 264         if (page & (1 << 0))
 265                 pgsel |= RTL8306_REG_PAGE_LO;
 266         if (!(page & (1 << 1))) /* bit is inverted */
 267                 pgsel |= RTL8306_REG_PAGE_HI;
 268         bus->write(bus, 0, RTL8306_REG_PAGE, pgsel);
 269 }
 270
 271 static inline int
 272 rtl_w16(struct switch_dev *dev, unsigned int page, unsigned int phy, unsigned int reg, u16 val)
 273 {
 274         struct rtl_priv *priv = to_rtl(dev);
 275         struct mii_bus *bus = priv->bus;
 276
 277         rtl_set_page(priv, page);
 278         bus->write(bus, phy, reg, val);
 279         bus->read(bus, phy, reg); /* flush */
 280         return 0;
 281 }
 282
 283 static inline int
 284 rtl_r16(struct switch_dev *dev, unsigned int page, unsigned int phy, unsigned int reg)
 285 {
 286         struct rtl_priv *priv = to_rtl(dev);
 287         struct mii_bus *bus = priv->bus;
 288
 289         rtl_set_page(priv, page);
 290         return bus->read(bus, phy, reg);
 291 }
 292
 293 static inline u16
 294 rtl_rmw(struct switch_dev *dev, unsigned int page, unsigned int phy, unsigned int reg, u16 mask, u16 val)
 295 {
 296         struct rtl_priv *priv = to_rtl(dev);
 297         struct mii_bus *bus = priv->bus;
 298         u16 r;
 299
 300         rtl_set_page(priv, page);
 301         r = bus->read(bus, phy, reg);
 302         r &= ~mask;
 303         r |= val;
 304         bus->write(bus, phy, reg, r);
 305         return bus->read(bus, phy, reg); /* flush */
 306 }
 307
 308
 309 static inline int
 310 rtl_get(struct switch_dev *dev, enum rtl_regidx s)
 311 {
 312         const struct rtl_reg *r = &rtl_regs[s];
 313         u16 val;
 314
 315         BUG_ON(s >= ARRAY_SIZE(rtl_regs));
 316         if (r->bits == 0) /* unimplemented */
 317                 return 0;
 318
 319         val = rtl_r16(dev, r->page, r->phy, r->reg);
 320
 321         if (r->shift > 0)
 322                 val >>= r->shift;
 323
 324         if (r->inverted)
 325                 val = ~val;
 326
 327         val &= (1 << r->bits) - 1;
 328
 329         return val;
 330 }
 331
 332 static int
 333 rtl_set(struct switch_dev *dev, enum rtl_regidx s, unsigned int val)
 334 {
 335         const struct rtl_reg *r = &rtl_regs[s];
 336         u16 mask = 0xffff;
 337
 338         BUG_ON(s >= ARRAY_SIZE(rtl_regs));
 339
 340         if (r->bits == 0) /* unimplemented */
 341                 return 0;
 342
 343         if (r->shift > 0)
 344                 val <<= r->shift;
 345
 346         if (r->inverted)
 347                 val = ~val;
 348
 349         if (r->bits != 16) {
 350                 mask = (1 << r->bits) - 1;
 351                 mask <<= r->shift;
 352         }
 353         val &= mask;
 354         return rtl_rmw(dev, r->page, r->phy, r->reg, mask, val);
 355 }
 356
 357 static void
 358 rtl_phy_save(struct switch_dev *dev, int port)
 359 {
 360         struct rtl_priv *priv = to_rtl(dev);
 361
 362         priv->tmp_nway = rtl_get(dev, RTL_PORT_REG(port, NWAY));
 363         priv->tmp_speed = rtl_get(dev, RTL_PORT_REG(port, SPEED));
 364         priv->tmp_duplex = rtl_get(dev, RTL_PORT_REG(port, DUPLEX));
 365 }
 366
 367 static void
 368 rtl_phy_restore(struct switch_dev *dev, int port)
 369 {
 370         struct rtl_priv *priv = to_rtl(dev);
 371
 372         rtl_set(dev, RTL_PORT_REG(port, NWAY), priv->tmp_nway);
 373         rtl_set(dev, RTL_PORT_REG(port, SPEED), priv->tmp_speed);
 374         rtl_set(dev, RTL_PORT_REG(port, DUPLEX), priv->tmp_duplex);
 375 }
 376
 377 static void
 378 rtl_port_set_enable(struct switch_dev *dev, int port, int enabled)
 379 {
 380         rtl_set(dev, RTL_PORT_REG(port, RXEN), enabled);
 381         rtl_set(dev, RTL_PORT_REG(port, TXEN), enabled);
 382 }
 383
 384 static int
 385 rtl_hw_apply(struct switch_dev *dev)
 386 {
 387         int i;
 388         int trunk_en, trunk_psel;
 389
 390         rtl_phy_save(dev, 5);
 391
 392         /* disable rx/tx from PHYs */
 393         for (i = 0; i < RTL8306_NUM_PORTS - 1; i++) {
 394                 rtl_port_set_enable(dev, i, 0);
 395         }
 396
 397         /* save trunking status */
 398         trunk_en = rtl_get(dev, RTL_REG_EN_TRUNK);
 399         trunk_psel = rtl_get(dev, RTL_REG_TRUNK_PORTSEL);
 400
 401         /* trunk port 3 and 4
 402          * XXX: Big WTF, but RealTek seems to do it */
 403         rtl_set(dev, RTL_REG_EN_TRUNK, 1);
 404         rtl_set(dev, RTL_REG_TRUNK_PORTSEL, 1);
 405
 406         /* execute the software reset */
 407         rtl_set(dev, RTL_REG_RESET, 1);
 408
 409         /* wait for the reset to complete,
 410          * but don't wait for too long */
 411         for (i = 0; i < 10; i++) {
 412                 if (rtl_get(dev, RTL_REG_RESET) == 0)
 413                         break;
 414
 415                 msleep(1);
 416         }
 417
 418         /* enable rx/tx from PHYs */
 419         for (i = 0; i < RTL8306_NUM_PORTS - 1; i++) {
 420                 rtl_port_set_enable(dev, i, 1);
 421         }
 422
 423         /* restore trunking settings */
 424         rtl_set(dev, RTL_REG_EN_TRUNK, trunk_en);
 425         rtl_set(dev, RTL_REG_TRUNK_PORTSEL, trunk_psel);
 426
 427         rtl_phy_restore(dev, 5);
 428
 429         return 0;
 430 }
 431
 432 static void
 433 rtl_hw_init(struct switch_dev *dev)
 434 {
 435         struct rtl_priv *priv = to_rtl(dev);
 436         int cpu_mask = 1 << dev->cpu_port;
 437         int i;
 438
 439         rtl_set(dev, RTL_REG_VLAN_ENABLE, 0);
 440         rtl_set(dev, RTL_REG_VLAN_FILTER, 0);
 441         rtl_set(dev, RTL_REG_EN_TRUNK, 0);
 442         rtl_set(dev, RTL_REG_TRUNK_PORTSEL, 0);
 443
 444         /* initialize cpu port settings */
 445         if (priv->do_cpu) {
 446                 rtl_set(dev, RTL_REG_CPUPORT, dev->cpu_port);
 447                 rtl_set(dev, RTL_REG_EN_CPUPORT, 1);
 448         } else {
 449                 rtl_set(dev, RTL_REG_CPUPORT, 7);
 450                 rtl_set(dev, RTL_REG_EN_CPUPORT, 0);
 451         }
 452         rtl_set(dev, RTL_REG_EN_TAG_OUT, 0);
 453         rtl_set(dev, RTL_REG_EN_TAG_IN, 0);
 454         rtl_set(dev, RTL_REG_EN_TAG_CLR, 0);
 455
 456         /* reset all vlans */
 457         for (i = 0; i < RTL8306_NUM_VLANS; i++) {
 458                 rtl_set(dev, RTL_VLAN_REG(i, VID), i);
 459                 rtl_set(dev, RTL_VLAN_REG(i, PORTMASK), 0);
 460         }
 461
 462         /* default to port isolation */
 463         for (i = 0; i < RTL8306_NUM_PORTS; i++) {
 464                 unsigned long mask;
 465
 466                 if ((1 << i) == cpu_mask)
 467                         mask = ((1 << RTL8306_NUM_PORTS) - 1) & ~cpu_mask; /* all bits set */
 468                 else
 469                         mask = cpu_mask | (1 << i);
 470
 471                 rtl_set(dev, RTL_VLAN_REG(i, PORTMASK), mask);
 472                 rtl_set(dev, RTL_PORT_REG(i, PVID), i);
 473                 rtl_set(dev, RTL_PORT_REG(i, NULL_VID_REPLACE), 1);
 474                 rtl_set(dev, RTL_PORT_REG(i, VID_INSERT), 1);
 475                 rtl_set(dev, RTL_PORT_REG(i, TAG_INSERT), 3);
 476         }
 477         rtl_hw_apply(dev);
 478 }
 479
 480 #ifdef DEBUG
 481 static int
 482 rtl_set_use_cpuport(struct switch_dev *dev, const struct switch_attr *attr, struct switch_val *val)
 483 {
 484         struct rtl_priv *priv = to_rtl(dev);
 485         priv->do_cpu = val->value.i;
 486         rtl_hw_init(dev);
 487         return 0;
 488 }
 489
 490 static int
 491 rtl_get_use_cpuport(struct switch_dev *dev, const struct switch_attr *attr, struct switch_val *val)
 492 {
 493         struct rtl_priv *priv = to_rtl(dev);
 494         val->value.i = priv->do_cpu;
 495         return 0;
 496 }
 497
 498 static int
 499 rtl_set_cpuport(struct switch_dev *dev, const struct switch_attr *attr, struct switch_val *val)
 500 {
 501         dev->cpu_port = val->value.i;
 502         rtl_hw_init(dev);
 503         return 0;
 504 }
 505
 506 static int
 507 rtl_get_cpuport(struct switch_dev *dev, const struct switch_attr *attr, struct switch_val *val)
 508 {
 509         val->value.i = dev->cpu_port;
 510         return 0;
 511 }
 512 #endif
 513
 514 static int
 515 rtl_reset(struct switch_dev *dev, const struct switch_attr *attr, struct switch_val *val)
 516 {
 517         rtl_hw_init(dev);
 518         return 0;
 519 }
 520
 521 static int
 522 rtl_attr_set_int(struct switch_dev *dev, const struct switch_attr *attr, struct switch_val *val)
 523 {
 524         int idx = attr->id + (val->port_vlan * attr->ofs);
 525
 526         if (attr->id >= ARRAY_SIZE(rtl_regs))
 527                 return -EINVAL;
 528
 529         if ((attr->max > 0) && (val->value.i > attr->max))
 530                 return -EINVAL;
 531
 532         /* access to phy register 22 on port 4/5
 533          * needs phy status save/restore */
 534         if ((val->port_vlan > 3) &&
 535                 (rtl_regs[idx].reg == 22) &&
 536                 (rtl_regs[idx].page == 0)) {
 537
 538                 rtl_phy_save(dev, val->port_vlan);
 539                 rtl_set(dev, idx, val->value.i);
 540                 rtl_phy_restore(dev, val->port_vlan);
 541         } else {
 542                 rtl_set(dev, idx, val->value.i);
 543         }
 544
 545         return 0;
 546 }
 547
 548 static int
 549 rtl_attr_get_int(struct switch_dev *dev, const struct switch_attr *attr, struct switch_val *val)
 550 {
 551         int idx = attr->id + (val->port_vlan * attr->ofs);
 552
 553         if (idx >= ARRAY_SIZE(rtl_regs))
 554                 return -EINVAL;
 555
 556         val->value.i = rtl_get(dev, idx);
 557         return 0;
 558 }
 559
 560 static int
 561 rtl_attr_set_port_int(struct switch_dev *dev, const struct switch_attr *attr, struct switch_val *val)
 562 {
 563         if (val->port_vlan >= RTL8306_NUM_PORTS)
 564                 return -EINVAL;
 565
 566         return rtl_attr_set_int(dev, attr, val);
 567 }
 568
 569 static int
 570 rtl_attr_get_port_int(struct switch_dev *dev, const struct switch_attr *attr, struct switch_val *val)
 571 {
 572         if (val->port_vlan >= RTL8306_NUM_PORTS)
 573                 return -EINVAL;
 574         return rtl_attr_get_int(dev, attr, val);
 575 }
 576
 577 static int
 578 rtl_attr_set_vlan_int(struct switch_dev *dev, const struct switch_attr *attr, struct switch_val *val)
 579 {
 580         if (val->port_vlan >= dev->vlans)
 581                 return -EINVAL;
 582
 583         return rtl_attr_set_int(dev, attr, val);
 584 }
 585
 586 static int
 587 rtl_attr_get_vlan_int(struct switch_dev *dev, const struct switch_attr *attr, struct switch_val *val)
 588 {
 589         if (val->port_vlan >= dev->vlans)
 590                 return -EINVAL;
 591
 592         return rtl_attr_get_int(dev, attr, val);
 593 }
 594
 595 static int
 596 rtl_get_ports(struct switch_dev *dev, struct switch_val *val)
 597 {
 598         unsigned int i, mask;
 599
 600         mask = rtl_get(dev, RTL_VLAN_REG(val->port_vlan, PORTMASK));
 601         for (i = 0; i < RTL8306_NUM_PORTS; i++) {
 602                 struct switch_port *port;
 603
 604                 if (!(mask & (1 << i)))
 605                         continue;
 606
 607                 port = &val->value.ports[val->len];
 608                 port->id = i;
 609                 port->flags = 0;
 610                 val->len++;
 611         }
 612
 613         return 0;
 614 }
 615
 616 static int
 617 rtl_set_vlan(struct switch_dev *dev, const struct switch_attr *attr, struct switch_val *val)
 618 {
 619         struct rtl_priv *priv = to_rtl(dev);
 620         int en = val->value.i;
 621         int i;
 622
 623         rtl_set(dev, RTL_REG_EN_TAG_OUT, en && priv->do_cpu);
 624         rtl_set(dev, RTL_REG_EN_TAG_IN, en && priv->do_cpu);
 625         rtl_set(dev, RTL_REG_EN_TAG_CLR, en && priv->do_cpu);
 626         rtl_set(dev, RTL_REG_VLAN_TAG_AWARE, en);
 627         if (en)
 628                 rtl_set(dev, RTL_REG_VLAN_FILTER, en);
 629
 630         for (i = 0; i < RTL8306_NUM_PORTS; i++) {
 631                 if (i > 3)
 632                         rtl_phy_save(dev, val->port_vlan);
 633                 rtl_set(dev, RTL_PORT_REG(i, NULL_VID_REPLACE), 1);
 634                 rtl_set(dev, RTL_PORT_REG(i, VID_INSERT), (en ? (i == dev->cpu_port ? 0 : 1) : 1));
 635                 rtl_set(dev, RTL_PORT_REG(i, TAG_INSERT), (en ? (i == dev->cpu_port ? 2 : 1) : 3));
 636                 if (i > 3)
 637                         rtl_phy_restore(dev, val->port_vlan);
 638         }
 639         rtl_set(dev, RTL_REG_VLAN_ENABLE, en);
 640
 641         return 0;
 642 }
 643
 644 static int
 645 rtl_get_vlan(struct switch_dev *dev, const struct switch_attr *attr, struct switch_val *val)
 646 {
 647         return rtl_get(dev, RTL_REG_VLAN_ENABLE);
 648 }
 649
 650 static int
 651 rtl_set_ports(struct switch_dev *dev, struct switch_val *val)
 652 {
 653         unsigned int mask = 0;
 654         unsigned int oldmask;
 655         int i;
 656
 657         for(i = 0; i < val->len; i++)
 658         {
 659                 struct switch_port *port = &val->value.ports[i];
 660                 bool tagged = false;
 661
 662                 mask |= (1 << port->id);
 663
 664                 if (port->id == dev->cpu_port)
 665                         continue;
 666
 667                 if ((i == dev->cpu_port) ||
 668                         (port->flags & (1 << SWITCH_PORT_FLAG_TAGGED)))
 669                         tagged = true;
 670
 671                 /* fix up PVIDs for added ports */
 672                 if (!tagged)
 673                         rtl_set(dev, RTL_PORT_REG(port->id, PVID), val->port_vlan);
 674
 675                 rtl_set(dev, RTL_PORT_REG(port->id, NON_PVID_DISCARD), (tagged ? 0 : 1));
 676                 rtl_set(dev, RTL_PORT_REG(port->id, VID_INSERT), (tagged ? 0 : 1));
 677                 rtl_set(dev, RTL_PORT_REG(port->id, TAG_INSERT), (tagged ? 2 : 1));
 678         }
 679
 680         oldmask = rtl_get(dev, RTL_VLAN_REG(val->port_vlan, PORTMASK));
 681         rtl_set(dev, RTL_VLAN_REG(val->port_vlan, PORTMASK), mask);
 682
 683         /* fix up PVIDs for removed ports, default to last vlan */
 684         oldmask &= ~mask;
 685         for (i = 0; i < RTL8306_NUM_PORTS; i++) {
 686                 if (!(oldmask & (1 << i)))
 687                         continue;
 688
 689                 if (i == dev->cpu_port)
 690                         continue;
 691
 692                 if (rtl_get(dev, RTL_PORT_REG(i, PVID)) == val->port_vlan)
 693                         rtl_set(dev, RTL_PORT_REG(i, PVID), dev->vlans - 1);
 694         }
 695
 696         return 0;
 697 }
 698
 699 static int
 700 rtl8306_config_init(struct phy_device *pdev)
 701 {
 702         struct net_device *netdev = pdev->attached_dev;
 703         struct rtl_priv *priv = pdev->priv;
 704         struct switch_dev *dev = &priv->dev;
 705         struct switch_val val;
 706         unsigned int chipid, chipver, chiptype;
 707         int err;
 708
 709         val.value.i = 1;
 710         memcpy(&priv->dev, &rtldev, sizeof(struct switch_dev));
 711         priv->do_cpu = 0;
 712         priv->page = -1;
 713         priv->bus = pdev->bus;
 714
 715         dev->priv = priv;
 716
 717         chipid = rtl_get(dev, RTL_REG_CHIPID);
 718         chipver = rtl_get(dev, RTL_REG_CHIPVER);
 719         chiptype = rtl_get(dev, RTL_REG_CHIPTYPE);
 720         switch(chiptype) {
 721         case 0:
 722         case 2:
 723                 strncpy(priv->hwname, RTL_NAME_S, sizeof(priv->hwname));
 724                 priv->type = RTL_TYPE_S;
 725                 break;
 726         case 1:
 727                 strncpy(priv->hwname, RTL_NAME_SD, sizeof(priv->hwname));
 728                 priv->type = RTL_TYPE_SD;
 729                 break;
 730         case 3:
 731                 strncpy(priv->hwname, RTL_NAME_SDM, sizeof(priv->hwname));
 732                 priv->type = RTL_TYPE_SDM;
 733                 break;
 734         default:
 735                 strncpy(priv->hwname, RTL_NAME_UNKNOWN, sizeof(priv->hwname));
 736                 break;
 737         }
 738
 739         dev->name = priv->hwname;
 740         rtl_hw_init(dev);
 741
 742         printk(KERN_INFO "Registering %s switch with Chip ID: 0x%04x, version: 0x%04x\n", priv->hwname, chipid, chipver);
 743
 744         err = register_switch(dev, netdev);
 745         if (err < 0) {
 746                 kfree(priv);
 747                 return err;
 748         }
 749
 750         return 0;
 751 }
 752
 753 static struct switch_attr rtl_globals[] = {
 754         {
 755                 .type = SWITCH_TYPE_INT,
 756                 .name = "reset",
 757                 .description = "Reset the switch",
 758                 .set = rtl_reset,
 759         },
 760         {
 761                 .type = SWITCH_TYPE_INT,
 762                 .name = "enable_vlan",
 763                 .description = "Enable VLAN mode",
 764                 .max = 1,
 765                 .set = rtl_set_vlan,
 766                 .get = rtl_get_vlan,
 767         },
 768         {
 769                 RTL_GLOBAL_REGATTR(EN_TRUNK),
 770                 .name = "trunk",
 771                 .description = "Enable port trunking",
 772                 .max = 1,
 773         },
 774         {
 775                 RTL_GLOBAL_REGATTR(TRUNK_PORTSEL),
 776                 .name = "trunk_sel",
 777                 .description = "Select ports for trunking (0: 0,1 - 1: 3,4)",
 778                 .max = 1,
 779         },
 780 #ifdef DEBUG
 781         {
 782                 RTL_GLOBAL_REGATTR(VLAN_FILTER),
 783                 .name = "vlan_filter",
 784                 .description = "Filter incoming packets for allowed VLANS",
 785                 .max = 1,
 786         },
 787         {
 788                 .type = SWITCH_TYPE_INT,
 789                 .name = "cpuport",
 790                 .description = "CPU Port",
 791                 .set = rtl_set_cpuport,
 792                 .get = rtl_get_cpuport,
 793                 .max = RTL8306_NUM_PORTS,
 794         },
 795         {
 796                 .type = SWITCH_TYPE_INT,
 797                 .name = "use_cpuport",
 798                 .description = "CPU Port handling flag",
 799                 .set = rtl_set_use_cpuport,
 800                 .get = rtl_get_use_cpuport,
 801                 .max = RTL8306_NUM_PORTS,
 802         },
 803         {
 804                 RTL_GLOBAL_REGATTR(TRAP_CPU),
 805                 .name = "trap_cpu",
 806                 .description = "VLAN trap to CPU",
 807                 .max = 1,
 808         },
 809         {
 810                 RTL_GLOBAL_REGATTR(VLAN_TAG_AWARE),
 811                 .name = "vlan_tag_aware",
 812                 .description = "Enable VLAN tag awareness",
 813                 .max = 1,
 814         },
 815         {
 816                 RTL_GLOBAL_REGATTR(VLAN_TAG_ONLY),
 817                 .name = "tag_only",
 818                 .description = "Only accept tagged packets",
 819                 .max = 1,
 820         },
 821 #endif
 822 };
 823 static struct switch_attr rtl_port[] = {
 824         {
 825                 RTL_PORT_REGATTR(PVID),
 826                 .name = "pvid",
 827                 .description = "Port VLAN ID",
 828                 .max = RTL8306_NUM_VLANS - 1,
 829         },
 830         {
 831                 RTL_PORT_REGATTR(LINK),
 832                 .name = "link",
 833                 .description = "get the current link state",
 834                 .max = 1,
 835                 .set = NULL,
 836         },
 837 #ifdef DEBUG
 838         {
 839                 RTL_PORT_REGATTR(NULL_VID_REPLACE),
 840                 .name = "null_vid",
 841                 .description = "NULL VID gets replaced by port default vid",
 842                 .max = 1,
 843         },
 844         {
 845                 RTL_PORT_REGATTR(NON_PVID_DISCARD),
 846                 .name = "non_pvid_discard",
 847                 .description = "discard packets with VID != PVID",
 848                 .max = 1,
 849         },
 850         {
 851                 RTL_PORT_REGATTR(VID_INSERT),
 852                 .name = "vid_insert_remove",
 853                 .description = "how should the switch insert and remove vids ?",
 854                 .max = 3,
 855         },
 856         {
 857                 RTL_PORT_REGATTR(TAG_INSERT),
 858                 .name = "tag_insert",
 859                 .description = "tag insertion handling",
 860                 .max = 3,
 861         },
 862 #endif
 863         {
 864                 RTL_PORT_REGATTR(SPEED),
 865                 .name = "speed",
 866                 .description = "current link speed",
 867                 .max = 1,
 868         },
 869         {
 870                 RTL_PORT_REGATTR(NWAY),
 871                 .name = "nway",
 872                 .description = "enable autonegotiation",
 873                 .max = 1,
 874         },
 875 };
 876
 877 static struct switch_attr rtl_vlan[] = {
 878         {
 879                 RTL_VLAN_REGATTR(VID),
 880                 .name = "vid",
 881                 .description = "VLAN ID",
 882                 .max = 4095,
 883         },
 884 };
 885
 886 /* template */
 887 static struct switch_dev rtldev = {
 888         .cpu_port = RTL8306_PORT_CPU,
 889         .ports = RTL8306_NUM_PORTS,
 890         .vlans = RTL8306_NUM_VLANS,
 891         .attr_global = {
 892                 .attr = rtl_globals,
 893                 .n_attr = ARRAY_SIZE(rtl_globals),
 894         },
 895         .attr_port = {
 896                 .attr = rtl_port,
 897                 .n_attr = ARRAY_SIZE(rtl_port),
 898         },
 899         .attr_vlan = {
 900                 .attr = rtl_vlan,
 901                 .n_attr = ARRAY_SIZE(rtl_vlan),
 902         },
 903
 904         .get_vlan_ports = rtl_get_ports,
 905         .set_vlan_ports = rtl_set_ports,
 906         .apply_config = rtl_hw_apply,
 907 };
 908
 909
 910 static int
 911 rtl8306_fixup(struct phy_device *pdev)
 912 {
 913         struct rtl_priv priv;
 914         u16 chipid;
 915
 916         if (pdev->addr != 0)
 917                 return 0;
 918
 919         priv.page = -1;
 920         priv.bus = pdev->bus;
 921         chipid = rtl_get(&priv.dev, RTL_REG_CHIPID);
 922         if (chipid == 0x5988)
 923                 pdev->phy_id = RTL8306_MAGIC;
 924
 925         return 0;
 926 }
 927
 928 static int
 929 rtl8306_probe(struct phy_device *pdev)
 930 {
 931         struct rtl_priv *priv;
 932
 933         priv = kzalloc(sizeof(struct rtl_priv), GFP_KERNEL);
 934         if (!priv)
 935                 return -ENOMEM;
 936
 937         pdev->priv = priv;
 938         return 0;
 939 }
 940
 941 static void
 942 rtl8306_remove(struct phy_device *pdev)
 943 {
 944         struct rtl_priv *priv = pdev->priv;
 945         unregister_switch(&priv->dev);
 946         kfree(priv);
 947 }
 948
 949 static int
 950 rtl8306_config_aneg(struct phy_device *pdev)
 951 {
 952         return 0;
 953 }
 954
 955 static int
 956 rtl8306_read_status(struct phy_device *pdev)
 957 {
 958         pdev->speed = SPEED_100;
 959         pdev->duplex = DUPLEX_FULL;
 960         pdev->link = 1;
 961
 962         return 0;
 963 }
 964
 965
 966 static struct phy_driver rtl8306_driver = {
 967         .name           = "Realtek RTL8306S",
 968         .phy_id         = RTL8306_MAGIC,
 969         .phy_id_mask    = 0xffffffff,
 970         .features       = PHY_BASIC_FEATURES,
 971         .probe          = &rtl8306_probe,
 972         .remove         = &rtl8306_remove,
 973         .config_init    = &rtl8306_config_init,
 974         .config_aneg    = &rtl8306_config_aneg,
 975         .read_status    = &rtl8306_read_status,
 976         .driver         = { .owner = THIS_MODULE,},
 977 };
 978
 979
 980 static int __init
 981 rtl_init(void)
 982 {
 983         phy_register_fixup_for_id(PHY_ANY_ID, rtl8306_fixup);
 984         return phy_driver_register(&rtl8306_driver);
 985 }
 986
 987 static void __exit
 988 rtl_exit(void)
 989 {
 990         phy_driver_unregister(&rtl8306_driver);
 991 }
 992
 993 module_init(rtl_init);
 994 module_exit(rtl_exit);
 995 MODULE_LICENSE("GPL");
 996