brcm63xx: Add fallback sprom for CT5361_CT5621
[openwrt/openwrt.git] / target / linux / brcm63xx / patches-3.14 / 526-board_CT6373-1.patch
1 --- a/arch/mips/bcm63xx/boards/board_bcm963xx.c
2 +++ b/arch/mips/bcm63xx/boards/board_bcm963xx.c
3 @@ -47,6 +47,12 @@
4 #define NB4_SPI_GPIO_CLK 6
5 #define NB4_74HC64_GPIO(X) (NB4_74X164_GPIO_BASE + (X))
6
7 +#define CT6373_PID_OFFSET 0xff80
8 +#define CT6373_74X164_GPIO_BASE 64
9 +#define CT6373_SPI_GPIO_MOSI 7
10 +#define CT6373_SPI_GPIO_CLK 6
11 +#define CT6373_74HC64_GPIO(X) (CT6373_74X164_GPIO_BASE + (X))
12 +
13 /*
14 * known 3368 boards
15 */
16 @@ -2420,6 +2426,117 @@ static struct board_info __initdata boar
17 .num_spis = ARRAY_SIZE(nb4_spi_devices),
18 };
19
20 +
21 +struct spi_gpio_platform_data ct6373_spi_gpio_data = {
22 + .sck = CT6373_SPI_GPIO_CLK,
23 + .mosi = CT6373_SPI_GPIO_MOSI,
24 + .miso = SPI_GPIO_NO_MISO,
25 + .num_chipselect = 1,
26 +};
27 +
28 +static struct platform_device ct6373_spi_gpio = {
29 + .name = "spi_gpio",
30 + .id = 1,
31 + .dev = {
32 + .platform_data = &ct6373_spi_gpio_data,
33 + },
34 +};
35 +
36 +static struct platform_device * __initdata ct6373_devices[] = {
37 + &ct6373_spi_gpio,
38 +};
39 +
40 +#if 0 /* FIXME: 3.14 dropped non-DT support */
41 +const struct gen_74x164_chip_platform_data ct6373_74x164_platform_data = {
42 + .base = CT6373_74X164_GPIO_BASE
43 +};
44 +#endif
45 +
46 +static struct spi_board_info ct6373_spi_devices[] = {
47 +#if 0 /* FIXME: 3.14 dropped non-DT support */
48 + {
49 + .modalias = "74x164",
50 + .max_speed_hz = 781000,
51 + .bus_num = 1,
52 + .controller_data = (void *) SPI_GPIO_NO_CHIPSELECT,
53 + .mode = SPI_MODE_0,
54 + .platform_data = &ct6373_74x164_platform_data
55 + }
56 +#endif
57 +};
58 +
59 +static struct board_info __initdata board_ct6373_1 = {
60 + .name = "CT6373-1",
61 + .expected_cpu_id = 0x6358,
62 +
63 + .has_uart0 = 1,
64 + .has_pci = 1,
65 + .has_ohci0 = 1,
66 + .has_ehci0 = 1,
67 +
68 + .has_enet1 = 1,
69 + .enet1 = {
70 + .has_phy = 1,
71 + .phy_id = 0,
72 + .force_speed_100 = 1,
73 + .force_duplex_full = 1,
74 + },
75 +
76 + .leds = {
77 + {
78 + .name = "CT6373-1:green:power",
79 + .gpio = 0,
80 + .default_trigger = "default-on",
81 + },
82 + {
83 + .name = "CT6373-1:green:usb",
84 + .gpio = 3,
85 + .active_low = 1,
86 + },
87 + {
88 + .name = "CT6373-1:green:wlan",
89 + .gpio = 9,
90 + .active_low = 1,
91 + },
92 + {
93 + .name = "CT6373-1:green:adsl",
94 + .gpio = CT6373_74HC64_GPIO(0),
95 + .active_low = 1,
96 + },
97 + {
98 + .name = "CT6373-1:green:line",
99 + .gpio = CT6373_74HC64_GPIO(1),
100 + .active_low = 1,
101 + },
102 + {
103 + .name = "CT6373-1:green:fxs1",
104 + .gpio = CT6373_74HC64_GPIO(2),
105 + .active_low = 1,
106 + },
107 + {
108 + .name = "CT6373-1:green:fxs2",
109 + .gpio = CT6373_74HC64_GPIO(3),
110 + .active_low = 1,
111 + },
112 + },
113 +
114 + .buttons = {
115 + {
116 + .desc = "reset",
117 + .gpio = 35,
118 + .active_low = 1,
119 + .type = EV_KEY,
120 + .code = KEY_RESTART,
121 + .debounce_interval = BCM963XX_KEYS_DEBOUNCE_INTERVAL,
122 + },
123 + },
124 +
125 + .devs = ct6373_devices,
126 + .num_devs = ARRAY_SIZE(ct6373_devices),
127 + .spis = ct6373_spi_devices,
128 + .num_spis = ARRAY_SIZE(ct6373_spi_devices),
129 +};
130 +
131 static struct board_info __initdata board_HW553 = {
132 .name = "HW553",
133 .expected_cpu_id = 0x6358,
134 @@ -2698,6 +2815,7 @@ static const struct board_info __initcon
135 &board_nb4_ser_r2,
136 &board_nb4_fxc_r1,
137 &board_nb4_fxc_r2,
138 + &board_ct6373_1,
139 &board_HW553,
140 &board_spw303v,
141 #endif