target/linux/bcm47xx/base-files/etc/board.d/01_network

   1 # Copyright (C) 2006-2015 OpenWrt.org
   2
   3 . /lib/functions/system.sh
   4 . /lib/functions/uci-defaults.sh
   5
   6 configure_by_vlanports() {
   7         local vlan0ports="$(nvram get vlan0ports)"
   8         local vlan1ports="$(nvram get vlan1ports)"
   9         local vlan2ports="$(nvram get vlan2ports)"
  10         local cpuport="$(swconfig dev switch0 help 2>/dev/null | sed -ne "s|.*cpu @ \([0-9]*\).*|\1|p")"
  11
  12         if [ "${vlan0ports:0:9}" = "0 1 2 3 8" -a "${vlan1ports:0:3}" = "4 8" -a ${cpuport:-0} -eq 8 ] || \
  13            [ "${vlan1ports:0:9}" = "0 1 2 3 8" -a "${vlan2ports:0:3}" = "4 8" -a ${cpuport:-0} -eq 8 ] || \
  14            [ "${vlan2ports:0:9}" = "0 1 2 3 8" -a "${vlan1ports:0:3}" = "4 8" -a ${cpuport:-0} -eq 8 ];
  15         then
  16                 ucidef_add_switch "switch0" \
  17                         "0:lan" "1:lan" "2:lan" "3:lan" "4:wan" "8@eth0"
  18
  19         elif [ "${vlan0ports:0:9}" = "1 2 3 4 8" -a "${vlan1ports:0:3}" = "0 8" -a ${cpuport:-0} -eq 8 ] || \
  20              [ "${vlan1ports:0:9}" = "1 2 3 4 8" -a "${vlan2ports:0:3}" = "0 8" -a ${cpuport:-0} -eq 8 ] || \
  21              [ "${vlan2ports:0:9}" = "1 2 3 4 8" -a "${vlan1ports:0:3}" = "0 8" -a ${cpuport:-0} -eq 8 ];
  22         then
  23                 ucidef_add_switch "switch0" \
  24                         "1:lan" "2:lan" "3:lan" "4:lan" "0:wan" "8@eth0"
  25
  26         elif [ "${vlan0ports:0:9}" = "0 1 2 3 5" -a "${vlan1ports:0:3}" = "4 5" -a ${cpuport:-0} -eq 5 ] || \
  27                  [ "${vlan1ports:0:9}" = "0 1 2 3 5" -a "${vlan2ports:0:3}" = "4 5" -a ${cpuport:-0} -eq 5 ] || \
  28                  [ "${vlan2ports:0:9}" = "0 1 2 3 5" -a "${vlan1ports:0:3}" = "4 5" -a ${cpuport:-0} -eq 5 ];
  29         then
  30                 ucidef_add_switch "switch0" \
  31                         "0:lan" "1:lan" "2:lan" "3:lan" "4:wan" "5@eth0"
  32
  33         elif [ "${vlan0ports:0:9}" = "1 2 3 4 5" -a "${vlan1ports:0:3}" = "0 5" -a ${cpuport:-0} -eq 5 ] || \
  34              [ "${vlan1ports:0:9}" = "1 2 3 4 5" -a "${vlan2ports:0:3}" = "0 5" -a ${cpuport:-0} -eq 5 ] || \
  35              [ "${vlan2ports:0:9}" = "1 2 3 4 5" -a "${vlan1ports:0:3}" = "0 5" -a ${cpuport:-0} -eq 5 ];
  36         then
  37                 ucidef_add_switch "switch0" \
  38                         "1:lan" "2:lan" "3:lan" "4:lan" "0:wan" "5@eth0"
  39
  40         else
  41                 logger -t "01_network" "Unable to determine network configuration"
  42                 ucidef_set_interface_lan "eth0"
  43         fi
  44 }
  45
  46 configure_by_boardnum() {
  47         local boardnum="$1"
  48
  49         case "$boardnum" in
  50         # WAP54G, Sitecom WL-105b
  51         "2" | \
  52         "1024")
  53                 ucidef_set_interface_lan "eth0"
  54                 ;;
  55
  56         # Generic detection fallback
  57         *)
  58                 configure_by_vlanports
  59                 ;;
  60         esac
  61 }
  62
  63 configure_by_boardtype() {
  64         local boardtype="$1"
  65         local boardnum="$2"
  66
  67         case "$boardtype" in
  68         "bcm94710r4")
  69                 ucidef_set_interfaces_lan_wan "eth0" "eth1"
  70                 ;;
  71
  72         "0x0467")
  73                 ucidef_add_switch "switch0" \
  74                         "0:lan" "1:lan" "2:lan" "3:lan" "4:wan" "5@eth0"
  75                 ;;
  76
  77         "0x042f" | \
  78         "0x0472")
  79                 # WL-500gP
  80                 if [ "$boardnum" = "45" ]; then
  81                         ucidef_add_switch "switch0" \
  82                                 "0:wan" "1:lan" "2:lan" "3:lan" "4:lan" "5@eth0"
  83
  84                 # Generic BCM94704
  85                 else
  86                         ucidef_set_interface_wan "eth1"
  87                         ucidef_add_switch "switch0" \
  88                                 "0:lan" "1:lan" "2:lan" "3:lan" "4:lan" "5@eth0"
  89
  90                         # MAC addresses on 4704 tend to be screwed up. Add a workaround here
  91                         local mac="$(nvram get et0macaddr)"
  92                         local pat="[0-9a-fA-F][0-9a-fA-F]:[0-9a-fA-F][0-9a-fA-F]"
  93                                   pat="$pat:[0-9a-fA-F][0-9a-fA-F]:[0-9a-fA-F][0-9a-fA-F]"
  94                                   pat="$pat:[0-9a-fA-F][0-9a-fA-F]:[0-9a-fA-F][0-9a-fA-F]"
  95
  96                         case "$mac" in
  97                         $pat)
  98                                 ucidef_set_interface_macaddr "lan" "$mac"
  99                                 ucidef_set_interface_macaddr "wan" "$(macaddr_add "$mac" 1)"
 100                                 ;;
 101                         esac
 102                 fi
 103                 ;;
 104
 105         # Buffalo WBR-B11 and Buffalo WBR-G54
 106         "bcm94710ap")
 107                 ucidef_set_interface_wan "eth1"
 108                 ucidef_add_switch "switch0" \
 109                         "0:lan" "1:lan" "2:lan" "3:lan" "4:lan" "5@eth0"
 110                 ;;
 111
 112         *)
 113                 configure_by_boardnum "$boardnum"
 114                 ;;
 115         esac
 116 }
 117
 118 configure_by_model() {
 119         local model="$1"
 120         local boardtype="$2"
 121         local boardnum="$3"
 122
 123         # Netgear WGT634U exception
 124         if grep -sqE 'mtd0: 000(6|a)0000' /proc/mtd; then
 125                 ucidef_add_switch "switch0" \
 126                         "0:lan" "1:lan" "2:lan" "3:lan" "4:wan" "5@eth0"
 127                 return
 128         fi
 129
 130         case "$model" in
 131         "Asus WLHDD" | \
 132         "Asus WL300G")
 133                 ucidef_set_interface_lan "eth1"
 134                 ;;
 135
 136         "Asus WL330GE")
 137                 ucidef_add_switch "switch0" "4:lan" "5t@eth0"
 138                 ;;
 139
 140         "Asus WL500G" | \
 141         "Microsoft MN-700")
 142                 ucidef_set_interfaces_lan_wan "eth0" "eth1"
 143                 ;;
 144
 145         "Asus WL500GP V2")
 146                 ucidef_add_switch "switch0" \
 147                         "0:lan:4" "1:lan:3" "2:lan:2" "3:lan:1" "4:wan" "5@eth0"
 148                 ;;
 149
 150         "Asus RT-N12"* | \
 151         "Buffalo WHR-G125" | \
 152         "D-Link DIR-330" | \
 153         "Motorola WR850G" | \
 154         "Siemens SE505 V2")
 155                 ucidef_add_switch "switch0" \
 156                         "0:lan" "1:lan" "2:lan" "3:lan" "4:wan" "5@eth0"
 157                 ;;
 158
 159         "Asus WL700")
 160                 ucidef_add_switch "switch0" \
 161                         "0:wan" "1:lan" "2:lan" "3:lan" "4:lan" "5@eth0"
 162                 ;;
 163
 164         "Asus WL500W" | \
 165         "Dell TrueMobile 2300")
 166                 ucidef_set_interface_wan "eth1"
 167                 ucidef_add_switch "switch0" \
 168                         "0:lan" "1:lan" "2:lan" "3:lan" "5@eth0"
 169                 ;;
 170
 171         "Asus RT-N16"* | \
 172         "Linksys E3000 V1" | \
 173         "Linksys WRT610N V2" | \
 174         "Netgear WNR3500 V2" | \
 175         "Netgear WNR3500L")
 176                 ucidef_add_switch "switch0" \
 177                         "0:wan" "1:lan:4" "2:lan:3" "3:lan:2" "4:lan:1" "8@eth0"
 178                 ;;
 179
 180         "Netgear R6200 V1")
 181                 ucidef_add_switch "switch0" \
 182                         "0:lan:4" "1:lan:3" "2:lan:2" "3:lan:1" "4:wan" "8@eth0"
 183                 ;;
 184
 185         "Netgear WN2500RP V1")
 186                 ucidef_add_switch "switch0" \
 187                         "0:lan:4" "1:lan:3" "2:lan:2" "3:lan:1" "5@eth0"
 188                 ;;
 189
 190         *)
 191                 configure_by_boardtype "$boardtype" "$boardnum"
 192                 ;;
 193         esac
 194 }
 195
 196
 197 model="$(cat /tmp/sysinfo/model)"
 198 boardtype="$(board_name)"
 199
 200 case "$boardtype" in
 201         *:*)
 202                 boardnum="${boardtype##*:}"
 203                 boardtype="${boardtype%:*}"
 204         ;;
 205 esac
 206
 207 board_config_update
 208
 209 configure_by_model "$model" "$boardtype" "$boardnum"
 210
 211 board_config_flush