target/linux/ath79/dts/qca9563_dlink_covr-p2500-a1.dts

   1 // SPDX-License-Identifier: GPL-2.0-or-later OR MIT
   2
   3 #include "qca956x.dtsi"
   4
   5 #include <dt-bindings/gpio/gpio.h>
   6 #include <dt-bindings/input/input.h>
   7 #include <dt-bindings/mtd/partitions/uimage.h>
   8
   9 / {
  10         compatible = "dlink,covr-p2500-a1", "qca,qca9563";
  11         model = "D-Link COVR-P2500 A1";
  12
  13         aliases {
  14                 led-boot = &led_power_green;
  15                 led-failsafe = &led_power_red;
  16                 led-running = &led_power_green;
  17                 led-upgrade = &led_power_red;
  18         };
  19
  20         keys {
  21                 compatible = "gpio-keys";
  22
  23                 wps {
  24                         label = "wps";
  25                         linux,code = <KEY_WPS_BUTTON>;
  26                         gpios = <&gpio 1 GPIO_ACTIVE_LOW>;
  27                 };
  28
  29                 reset {
  30                         label = "reset";
  31                         linux,code = <KEY_RESTART>;
  32                         gpios = <&gpio 2 GPIO_ACTIVE_LOW>;
  33                 };
  34         };
  35
  36         leds {
  37                 compatible = "gpio-leds";
  38                 pinctrl-names = "default";
  39                 pinctrl-0 = <&jtag_disable_pins>;
  40
  41                 lan {
  42                         label = "green:lan";
  43                         gpios = <&gpio 6 GPIO_ACTIVE_LOW>;
  44                 };
  45
  46                 led_power_green: power_green {
  47                         label = "green:power";
  48                         gpios = <&gpio 7 GPIO_ACTIVE_LOW>;
  49                         default-state = "on";
  50                 };
  51
  52                 wlan5g {
  53                         label = "green:wlan5g";
  54                         gpios = <&gpio 8 GPIO_ACTIVE_LOW>;
  55                         linux,default-trigger = "phy0radio";
  56                 };
  57
  58                 led_power_red: power_red {
  59                         label = "red:power";
  60                         gpios = <&gpio 15 GPIO_ACTIVE_LOW>;
  61                 };
  62
  63                 wlan2g {
  64                         label = "green:wlan2g";
  65                         gpios = <&gpio 19 GPIO_ACTIVE_LOW>;
  66                         linux,default-trigger = "phy1radio";
  67                 };
  68         };
  69
  70         virtual_flash {
  71                 compatible = "mtd-concat";
  72
  73                 devices = <&fwconcat0 &fwconcat1>;
  74
  75                 partitions {
  76                         compatible = "fixed-partitions";
  77                         #address-cells = <1>;
  78                         #size-cells = <1>;
  79
  80                         partition@0 {
  81                                 compatible = "openwrt,uimage", "denx,uimage";
  82                                 openwrt,ih-magic = <0x68737173>;
  83                                 label = "firmware";
  84                                 reg = <0x0 0x0>;
  85                         };
  86                 };
  87         };
  88 };
  89
  90 &spi {
  91         status = "okay";
  92
  93         flash@0 {
  94                 compatible = "jedec,spi-nor";
  95                 reg = <0>;
  96                 spi-max-frequency = <50000000>;
  97
  98                 partitions {
  99                         compatible = "fixed-partitions";
 100                         #address-cells = <1>;
 101                         #size-cells = <1>;
 102
 103                         partition@0 {
 104                                 label = "u-boot";
 105                                 reg = <0x0 0x40000>;
 106                                 read-only;
 107                         };
 108
 109                         partition@40000 {
 110                                 label = "u-boot-env";
 111                                 reg = <0x40000 0x10000>;
 112                                 read-only;
 113                         };
 114
 115                         fwconcat0: partition@50000 {
 116                                 label = "fwconcat0";
 117                                 reg = <0x50000 0xe30000>;
 118                         };
 119
 120                         partition@e80000 {
 121                                 label = "loader";
 122                                 reg = <0xe80000 0x10000>;
 123                                 read-only;
 124                         };
 125
 126                         fwconcat1: partition@e90000 {
 127                                 label = "fwconcat1";
 128                                 reg = <0xe90000 0x160000>;
 129                         };
 130
 131                         art: partition@ff0000 {
 132                                 label = "art";
 133                                 reg = <0xff0000 0x10000>;
 134                                 read-only;
 135
 136                                 nvmem-layout {
 137                                         compatible = "fixed-layout";
 138                                         #address-cells = <1>;
 139                                         #size-cells = <1>;
 140
 141                                         calibration_ath9k: calibration@1000 {
 142                                                 reg = <0x1000 0x440>;
 143                                         };
 144
 145                                         precalibration_ath10k: pre-calibration@5000 {
 146                                                 reg = <0x5000 0x2f20>;
 147                                         };
 148                                 };
 149                         };
 150                 };
 151         };
 152 };
 153
 154 &pcie {
 155         status = "okay";
 156
 157         wifi@0,0 {
 158                 compatible = "qcom,ath10k";
 159                 reg = <0 0 0 0 0>;
 160
 161                 nvmem-cells = <&precalibration_ath10k>;
 162                 nvmem-cell-names = "pre-calibration";
 163         };
 164 };
 165
 166 &gpio {
 167         phy-reset {
 168                 gpio-hog;
 169                 gpios = <11 GPIO_ACTIVE_LOW>;
 170                 output-low;
 171                 line-name = "phy-reset";
 172         };
 173 };
 174
 175 &mdio0 {
 176         status = "okay";
 177
 178         phy0: ethernet-phy@0 {
 179                 reg = <0>;
 180                 phy-mode = "sgmii";
 181                 qca,mib-poll-interval = <500>;
 182
 183                 qca,ar8327-initvals = <
 184                         0x04 0x00080080 /* PORT0 PAD MODE CTRL */
 185                         0x10 0x81000080 /* POWER_ON_STRAP */
 186                         0x50 0xcc35cc35 /* LED_CTRL0 */
 187                         0x54 0xcb37cb37 /* LED_CTRL1 */
 188                         0x58 0x00000000 /* LED_CTRL2 */
 189                         0x5c 0x00f3cf00 /* LED_CTRL3 */
 190                         0x7c 0x0000007e /* PORT0_STATUS */
 191                         >;
 192         };
 193 };
 194
 195 &eth0 {
 196         status = "okay";
 197
 198         pll-data = <0x03000101 0x00000101 0x00001919>;
 199
 200         phy-mode = "sgmii";
 201         phy-handle = <&phy0>;
 202 };
 203
 204 &wmac {
 205         status = "okay";
 206
 207         nvmem-cells = <&calibration_ath9k>;
 208         nvmem-cell-names = "calibration";
 209 };