target/linux/ath79/dts/qca9558_zyxel_nbg6716.dts

   1 // SPDX-License-Identifier: GPL-2.0-or-later OR MIT
   2 /dts-v1/;
   3
   4 #include <dt-bindings/gpio/gpio.h>
   5 #include <dt-bindings/input/input.h>
   6
   7 #include "qca9557.dtsi"
   8
   9 / {
  10         compatible = "zyxel,nbg6716", "qca,qca9558";
  11         model = "ZyXEL NBG6716";
  12
  13         chosen {
  14                 bootargs = "console=ttyS0,115200n8";
  15         };
  16
  17         aliases {
  18                 led-boot = &power;
  19                 led-failsafe = &power;
  20                 led-running = &power;
  21                 led-upgrade = &power;
  22         };
  23
  24         leds {
  25                 compatible = "gpio-leds";
  26
  27                 power: power {
  28                         label = "nbg6716:white:power";
  29                         gpios = <&gpio 15 GPIO_ACTIVE_LOW>;
  30                 };
  31
  32                 wan {
  33                         label = "nbg6716:white:internet";
  34                         gpios = <&gpio 18 GPIO_ACTIVE_LOW>;
  35                 };
  36
  37                 usb1 {
  38                         label = "nbg6716:white:usb1";
  39                         gpios = <&gpio 4 GPIO_ACTIVE_LOW>;
  40                         linux,default-trigger = "usbport";
  41                         trigger-sources = <&hub_port0>;
  42                 };
  43
  44                 usb2 {
  45                         label = "nbg6716:white:usb2";
  46                         gpios = <&gpio 13 GPIO_ACTIVE_LOW>;
  47                         linux,default-trigger = "usbport";
  48                         trigger-sources = <&hub_port1>;
  49                 };
  50
  51                 wifi2 {
  52                         label = "nbg6716:white:wifi2";
  53                         gpios = <&gpio 19 GPIO_ACTIVE_LOW>;
  54                         linux,default-trigger = "phy1tpt";
  55                 };
  56
  57                 wifi5 {
  58                         label = "nbg6716:white:wifi5";
  59                         gpios = <&gpio 17 GPIO_ACTIVE_LOW>;
  60                         linux,default-trigger = "phy0tpt";
  61                 };
  62
  63                 wps {
  64                         label = "nbg6716:white:wps";
  65                         gpios = <&gpio 2 GPIO_ACTIVE_LOW>;
  66                 };
  67         };
  68
  69         keys {
  70                 compatible = "gpio-keys";
  71
  72                 reset {
  73                         label = "reset";
  74                         linux,code = <KEY_RESTART>;
  75                         gpios = <&gpio 23 GPIO_ACTIVE_LOW>;
  76                         debounce-interval = <60>;
  77                 };
  78
  79                 wifi_button {
  80                         label = "WiFi button";
  81                         linux,code = <KEY_RFKILL>;
  82                         gpios = <&gpio 1 GPIO_ACTIVE_LOW>;
  83                         debounce-interval = <60>;
  84                 };
  85
  86                 usb1 {
  87                         label = "USB1 eject button";
  88                         gpios = <&gpio 0 GPIO_ACTIVE_LOW>;
  89                         debounce-interval = <60>;
  90                 };
  91
  92                 usb2 {
  93                         label = "USB2 eject button";
  94                         gpios = <&gpio 14 GPIO_ACTIVE_LOW>;
  95                         debounce-interval = <60>;
  96                 };
  97
  98                 wps {
  99                         label = "WPS button";
 100                         linux,code = <KEY_WPS_BUTTON>;
 101                         gpios = <&gpio 22 GPIO_ACTIVE_LOW>;
 102                         debounce-interval = <60>;
 103                 };
 104         };
 105 };
 106
 107 &gpio {
 108         gpio_usb_power {
 109                 gpio-hog;
 110                 gpios = <16 0>;
 111                 output-high;
 112                 line-name = "nbg6716:power:usb";
 113         };
 114 };
 115
 116 &uart {
 117         status = "okay";
 118 };
 119
 120 &spi {
 121         status = "okay";
 122         num-cs = <1>;
 123
 124         flash@0 {
 125                 compatible = "jedec,spi-nor";
 126                 reg = <0>;
 127                 spi-max-frequency = <25000000>;
 128
 129                 partitions {
 130                         compatible = "fixed-partitions";
 131                         #address-cells = <1>;
 132                         #size-cells = <1>;
 133
 134                         uboot: partition@0 {
 135                                 label = "u-boot";
 136                                 reg = <0x000000 0x040000>;
 137                                 read-only;
 138                         };
 139
 140                         uboot_env: partition@40000 {
 141                                 label = "u-boot-env";
 142                                 reg = <0x040000 0x010000>;
 143                         };
 144
 145                         art: partition@50000 {
 146                                 label = "art";
 147                                 reg = <0x050000 0x010000>;
 148                                 read-only;
 149                         };
 150
 151                         partition@60000 {
 152                                 label = "nbu";
 153                                 reg = <0x060000 0xfa0000>;
 154                         };
 155                 };
 156         };
 157 };
 158
 159 &nand {
 160         status = "okay";
 161
 162         partitions {
 163                 compatible = "fixed-partitions";
 164                 #address-cells = <1>;
 165                 #size-cells = <1>;
 166
 167                 partition@0 {
 168                         label = "zyxel_rfsd";
 169                         reg = <0x0 0x200000>;
 170                 };
 171
 172                 partition@200000 {
 173                         label = "romd";
 174                         reg = <0x200000 0x200000>;
 175                 };
 176
 177                 partition@400000 {
 178                         label = "header";
 179                         reg = <0x400000 0x100000>;
 180                 };
 181
 182                 firmware@500000 {
 183                         label = "firmware";
 184                         reg = <0x500000 0x7b00000>;
 185                 };
 186
 187                 partition@500000 {
 188                         label = "kernel";
 189                         reg = <0x500000 0x400000>;
 190                 };
 191
 192                 partition@900000 {
 193                         label = "ubi";
 194                         reg = <0x900000 0x7700000>;
 195                 };
 196         };
 197 };
 198
 199 &mdio0 {
 200         status = "okay";
 201
 202         phy0: ethernet-phy@0 {
 203                 reg = <17>;
 204                 phy-mode = "rgmii-id";
 205         };
 206
 207         switch0@1f {
 208                 compatible = "qca,ar8327";
 209                 reg = <0x1f>;
 210                 qca,ar8327-initvals = <
 211                         0x04 0x87600000 /* PORT0 PAD MODE CTRL */
 212                         0x0c 0x00080080 /* PORT6 PAD MODE CTRL */
 213                         0x10 0x81000080 /* POWER_ON_STRIP */
 214                         0x50 0xffb7ffb7 /* LED_CTRL0 */
 215                         0x54 0xffb7ffb7 /* LED_CTRL1 */
 216                         0x58 0xffb7ffb7 /* LED_CTRL2 */
 217                         0x5c 0x03ffff00 /* LED_CTRL3 */
 218                         0x7c 0x0000007e /* PORT0_STATUS */
 219                         0x94 0x0000007e /* PORT6 STATUS */
 220                         >;
 221         };
 222 };
 223
 224 &mdio1 {
 225         status = "okay";
 226
 227         phy1: ethernet-phy@1 {
 228                 reg = <1>;
 229                 phy-mode = "sgmii";
 230         };
 231 };
 232
 233
 234 &eth0 {
 235         status = "okay";
 236
 237         pll-data = <0xa6000000 0x00000101 0x00001616>;
 238         phy-handle = <&phy0>;
 239         fixed-link {
 240                 speed = <1000>;
 241                 full-duplex;
 242         };
 243 };
 244
 245 &eth1 {
 246         status = "okay";
 247
 248         pll-data = <0x03000101 0x00000101 0x00001616>;
 249         phy-handle = <&phy1>;
 250         fixed-link {
 251                 speed = <1000>;
 252                 full-duplex;
 253         };
 254 };
 255
 256 &gpio {
 257         status = "okay";
 258 };
 259
 260 &wmac {
 261         status = "okay";
 262 };
 263
 264 &pcie1 {
 265         status = "okay";
 266
 267         wifi@0,0 {
 268                 compatible = "qcom,ath10k";
 269                 reg = <0 0 0 0 0>;
 270                 qcom,ath10k-calibration-variant = "ZyXEL-NBG6716";
 271         };
 272 };
 273
 274 &usb_phy0 {
 275         status = "okay";
 276 };
 277
 278 &usb_phy1 {
 279         status = "okay";
 280 };
 281
 282 &usb0 {
 283         status = "okay";
 284
 285         hub_port0: port@1 {
 286                 reg = <1>;
 287                 #trigger-source-cells = <0>;
 288         };
 289
 290 };
 291
 292 &usb1 {
 293         status = "okay";
 294
 295         hub_port1: port@1 {
 296                 reg = <1>;
 297                 #trigger-source-cells = <0>;
 298         };
 299 };