target/linux/ath79/dts/qca9558_openmesh_om5p-ac-v2.dts

   1 // SPDX-License-Identifier: GPL-2.0-or-later OR MIT
   2
   3 #include "qca955x.dtsi"
   4
   5 #include <dt-bindings/gpio/gpio.h>
   6 #include <dt-bindings/input/input.h>
   7
   8 / {
   9         compatible = "openmesh,om5p-ac-v2", "qca,qca9558";
  10         model = "OpenMesh OM5P-AC v2";
  11
  12         chosen {
  13                 /delete-property/ bootargs;
  14         };
  15
  16         aliases {
  17                 serial0 = &uart;
  18                 led-boot = &led_power_blue;
  19                 led-failsafe = &led_power_blue;
  20                 led-running = &led_power_blue;
  21                 led-upgrade = &led_power_blue;
  22                 label-mac-device = &eth0;
  23         };
  24
  25         leds {
  26                 compatible = "gpio-leds";
  27
  28                 wifi_green {
  29                         label = "green:wifi";
  30                         gpios = <&gpio 13 GPIO_ACTIVE_LOW>;
  31                         linux,default-trigger = "phy0tpt";
  32                 };
  33
  34                 led_power_blue: power_blue {
  35                         label = "blue:power";
  36                         gpios = <&gpio 14 GPIO_ACTIVE_LOW>;
  37                         default-state = "on";
  38                 };
  39
  40                 wifi_yellow {
  41                         label = "yellow:wifi";
  42                         gpios = <&gpio 15 GPIO_ACTIVE_LOW>;
  43                 };
  44
  45                 wifi_red {
  46                         label = "red:wifi";
  47                         gpios = <&gpio 23 GPIO_ACTIVE_LOW>;
  48                 };
  49         };
  50
  51         keys {
  52                 compatible = "gpio-keys";
  53
  54                 reset {
  55                         label = "reset";
  56                         linux,code = <KEY_RESTART>;
  57                         gpios = <&gpio 1 GPIO_ACTIVE_LOW>;
  58                 };
  59         };
  60
  61         i2c {
  62                 compatible = "i2c-gpio";
  63                 gpios = <&gpio 19 GPIO_ACTIVE_HIGH /* sda */
  64                          &gpio 18 GPIO_ACTIVE_HIGH /* scl */
  65                         >;
  66                 #address-cells = <1>;
  67                 #size-cells = <0>;
  68
  69                 i2c-gpio,scl-open-drain;
  70                 i2c-gpio,sda-open-drain;
  71
  72                 tmp423a@4e {
  73                         compatible = "ti,tmp423";
  74                         reg = <0x4e>;
  75                 };
  76         };
  77
  78         watchdog {
  79                 compatible = "linux,wdt-gpio";
  80                 gpios = <&gpio 12 GPIO_ACTIVE_LOW>;
  81                 hw_algo = "toggle";
  82                 /* hw_margin_ms is actually 300s but driver limits it to 60s */
  83                 hw_margin_ms = <60000>;
  84                 always-running;
  85         };
  86
  87         gpio-export {
  88                 compatible = "gpio-export";
  89                 #size-cells = <0>;
  90
  91                 gpio_pa_dcdc {
  92                         gpio-export,name = "om5pac:pa_dcdc";
  93                         gpio-export,output = <1>;
  94                         gpios = <&gpio 2 GPIO_ACTIVE_HIGH>;
  95                 };
  96                 gpio_pa_high {
  97                         gpio-export,name = "om5pac:pa_high";
  98                         gpio-export,output = <1>;
  99                         gpios = <&gpio 16 GPIO_ACTIVE_HIGH>;
 100                 };
 101         };
 102 };
 103
 104 &pinmux {
 105         pinmux_pa_dcdc_pins {
 106                 pinctrl-single,bits = <0x0 0x0 0xff0000>;
 107         };
 108
 109         pinmux_pa_high_pins {
 110                 pinctrl-single,bits = <0x10 0x0 0xff>;
 111         };
 112 };
 113
 114 &pcie0 {
 115         status = "okay";
 116 };
 117
 118 &spi {
 119         status = "okay";
 120
 121         flash@0 {
 122                 compatible = "jedec,spi-nor";
 123                 reg = <0>;
 124                 spi-max-frequency = <25000000>;
 125
 126                 /* partitions are passed via bootloader */
 127                 partitions {
 128                         compatible = "fixed-partitions";
 129                         #address-cells = <1>;
 130                         #size-cells = <1>;
 131
 132                         partition@0 {
 133                                 label = "u-boot";
 134                                 reg = <0x000000 0x040000>;
 135                                 read-only;
 136                         };
 137
 138                         partition@40000 {
 139                                 label = "u-boot-env";
 140                                 reg = <0x040000 0x010000>;
 141                         };
 142
 143                         partition@50000 {
 144                                 label = "custom";
 145                                 reg = <0x050000 0x060000>;
 146                                 read-only;
 147                         };
 148
 149                         partition@b0000 {
 150                                 label = "inactive";
 151                                 reg = <0x0b0000 0x7a0000>;
 152                         };
 153
 154                         partition@850000 {
 155                                 label = "inactive2";
 156                                 reg = <0x850000 0x7a0000>;
 157                         };
 158
 159                         art: partition@ff0000 {
 160                                 label = "ART";
 161                                 reg = <0xff0000 0x010000>;
 162                                 read-only;
 163                         };
 164                 };
 165         };
 166 };
 167
 168 &mdio0 {
 169         status = "okay";
 170
 171         phy4: ethernet-phy@4 {
 172                 reg = <4>;
 173                 eee-broken-100tx;
 174                 eee-broken-1000t;
 175         };
 176 };
 177
 178 &mdio1 {
 179         status = "okay";
 180
 181         phy1: ethernet-phy@1 {
 182                 reg = <1>;
 183                 eee-broken-100tx;
 184                 eee-broken-1000t;
 185                 at803x-override-sgmii-link-check;
 186         };
 187 };
 188
 189 &eth0 {
 190         status = "okay";
 191
 192         pll-data = <0x82000101 0x80000101 0x80001313>;
 193
 194         nvmem-cells = <&macaddr_art_0>;
 195         nvmem-cell-names = "mac-address";
 196
 197         phy-mode = "rgmii-id";
 198         phy-handle = <&phy4>;
 199
 200         gmac-config {
 201                 device = <&gmac>;
 202                 rgmii-enabled = <1>;
 203                 rxd-delay = <2>;
 204                 rxdv-delay = <2>;
 205                 txd-delay = <0>;
 206                 txen-delay = <0>;
 207         };
 208 };
 209
 210 &eth1 {
 211         status = "okay";
 212
 213         pll-data = <0x03000101 0x80000101 0x80001313>;
 214
 215         nvmem-cells = <&macaddr_art_6>;
 216         nvmem-cell-names = "mac-address";
 217
 218         qca955x-sgmii-fixup;
 219
 220         phy-handle = <&phy1>;
 221 };
 222
 223 &wmac {
 224         status = "okay";
 225
 226         mtd-cal-data = <&art 0x1000>;
 227         nvmem-cells = <&macaddr_art_0>;
 228         nvmem-cell-names = "mac-address";
 229         mac-address-increment = <2>;
 230 };
 231
 232 &art {
 233         compatible = "nvmem-cells";
 234         #address-cells = <1>;
 235         #size-cells = <1>;
 236
 237         macaddr_art_0: macaddr@0 {
 238                 reg = <0x0 0x6>;
 239         };
 240
 241         macaddr_art_6: macaddr@6 {
 242                 reg = <0x6 0x6>;
 243         };
 244 };