target/linux/ath79/dts/qca9558_allnet_all-wap02860ac.dts

   1 // SPDX-License-Identifier: GPL-2.0-or-later OR MIT
   2
   3 #include "qca955x.dtsi"
   4
   5 #include <dt-bindings/gpio/gpio.h>
   6 #include <dt-bindings/input/input.h>
   7
   8 / {
   9         model = "ALLNET ALL-WAP02860AC";
  10         compatible = "allnet,all-wap02860ac", "qca,qca9558";
  11
  12         aliases {
  13                 label-mac-device = &eth0;
  14                 led-boot = &led_power;
  15                 led-failsafe = &led_power;
  16                 led-running = &led_power;
  17                 led-upgrade = &led_power;
  18         };
  19
  20         keys {
  21                 compatible = "gpio-keys";
  22
  23                 reset {
  24                         label = "reset";
  25                         linux,code = <KEY_RESTART>;
  26                         gpios = <&gpio 17 GPIO_ACTIVE_LOW>;
  27                 };
  28         };
  29
  30         leds {
  31                 compatible = "gpio-leds";
  32
  33                 led_power: power {
  34                         label = "amber:power";
  35                         gpios = <&gpio 22 GPIO_ACTIVE_LOW>;
  36                         default-state = "on";
  37                 };
  38
  39                 wlan2g {
  40                         label = "blue:wlan2g";
  41                         gpios = <&gpio 13 GPIO_ACTIVE_LOW>;
  42                         linux,default-trigger = "phy1tpt";
  43                 };
  44
  45                 wlan5g {
  46                         label = "green:wlan5g";
  47                         gpios = <&gpio 23 GPIO_ACTIVE_LOW>;
  48                         linux,default-trigger = "phy0tpt";
  49                 };
  50
  51                 wps {
  52                         label = "blue:wps";
  53                         gpios = <&gpio 19 GPIO_ACTIVE_LOW>;
  54                 };
  55         };
  56 };
  57
  58 &eth0 {
  59         status = "okay";
  60
  61         pll-data = <0x8e000000 0x80000101 0x80001313>;
  62         phy-handle = <&phy5>;
  63         phy-mode = "rgmii-rxid";
  64
  65         mtd-mac-address = <&art 0x0>;
  66 };
  67
  68 &mdio0 {
  69         status = "okay";
  70
  71         phy5: ethernet-phy@5 {
  72                 reg = <5>;
  73                 eee-broken-100tx;
  74                 eee-broken-1000t;
  75         };
  76 };
  77
  78 &pcie0 {
  79         status = "okay";
  80
  81         wifi@0,0 {
  82                 compatible = "qcom,ath10k";
  83                 reg = <0 0 0 0 0>;
  84         };
  85 };
  86
  87 &pll {
  88         clocks = <&extosc>;
  89 };
  90
  91 &spi {
  92         status = "okay";
  93
  94         flash@0 {
  95                 compatible = "jedec,spi-nor";
  96                 reg = <0>;
  97                 spi-max-frequency = <25000000>;
  98
  99                 partitions {
 100                         compatible = "fixed-partitions";
 101                         #address-cells = <1>;
 102                         #size-cells = <1>;
 103
 104                         partition@0 {
 105                                 label = "u-boot";
 106                                 reg = <0x000000 0x040000>;
 107                                 read-only;
 108                         };
 109
 110                         partition@40000 {
 111                                 label = "u-boot-env";
 112                                 reg = <0x040000 0x010000>;
 113                         };
 114
 115                         partition@50000 {
 116                                 label = "custom";
 117                                 reg = <0x050000 0x050000>;
 118                                 read-only;
 119                         };
 120
 121                         partition@a0000 {
 122                                 compatible = "denx,uimage";
 123                                 label = "firmware";
 124                                 reg = <0x0a0000 0xcd0000>;
 125                         };
 126
 127                         partition@d70000 {
 128                                 label = "failsafe";
 129                                 reg = <0xd70000 0x280000>;
 130                                 read-only;
 131                         };
 132
 133                         art: partition@ff0000 {
 134                                 label = "art";
 135                                 reg = <0xff0000 0x010000>;
 136                                 read-only;
 137                         };
 138                 };
 139         };
 140 };
 141
 142 &uart {
 143         status = "okay";
 144 };
 145
 146 &wmac {
 147         status = "okay";
 148
 149         mtd-cal-data = <&art 0x1000>;
 150         mtd-mac-address = <&art 0x0>;
 151         mtd-mac-address-increment = <1>;
 152         qca-no-eeprom;
 153 };