target/linux/ath79/dts/ar9331_embeddedwireless_dorin.dts

   1 // SPDX-License-Identifier: GPL-2.0-or-later OR MIT
   2
   3 #include "ar9331.dtsi"
   4
   5 #include <dt-bindings/gpio/gpio.h>
   6 #include <dt-bindings/input/input.h>
   7
   8 / {
   9         model = "Embedded Wireless Dorin";
  10         compatible = "embeddedwireless,dorin", "qca,ar9331";
  11
  12         aliases {
  13                 led-boot = &led_status;
  14                 led-failsafe = &led_status;
  15                 led-running = &led_status;
  16                 led-upgrade = &led_status;
  17         };
  18
  19         leds {
  20                 compatible = "gpio-leds";
  21
  22                 led_status: status {
  23                         label = "green:status";
  24                         gpios = <&gpio 21 GPIO_ACTIVE_LOW>;
  25                 };
  26         };
  27
  28         keys {
  29                 compatible = "gpio-keys";
  30
  31                 wps {
  32                         label = "wps";
  33                         linux,code = <KEY_WPS_BUTTON>;
  34                         gpios = <&gpio 11 GPIO_ACTIVE_HIGH>;
  35                 };
  36
  37                 reset {
  38                         label = "reset";
  39                         linux,code = <KEY_RESTART>;
  40                         gpios = <&gpio 6 GPIO_ACTIVE_HIGH>;
  41                 };
  42         };
  43 };
  44
  45 &usb {
  46         dr_mode = "host";
  47         status = "okay";
  48 };
  49
  50 &usb_phy {
  51         status = "okay";
  52 };
  53
  54 &spi {
  55         status = "okay";
  56
  57         flash@0 {
  58                 compatible = "jedec,spi-nor";
  59                 spi-max-frequency = <50000000>;
  60                 reg = <0>;
  61
  62                 partitions {
  63                         compatible = "fixed-partitions";
  64                         #address-cells = <1>;
  65                         #size-cells = <1>;
  66
  67                         partition@0 {
  68                                 label = "u-boot";
  69                                 reg = <0x000000 0x040000>;
  70                                 read-only;
  71                         };
  72
  73                         partition@1 {
  74                                 label = "u-boot-env";
  75                                 reg = <0x040000 0x010000>;
  76                         };
  77
  78                         partition@2 {
  79                                 compatible = "denx,uimage";
  80                                 label = "firmware";
  81                                 reg = <0x050000 0xfa0000>;
  82                         };
  83
  84                         art: partition@3 {
  85                                 label = "art";
  86                                 reg = <0xff0000 0x010000>;
  87                                 read-only;
  88
  89                                 nvmem-layout {
  90                                         compatible = "fixed-layout";
  91                                         #address-cells = <1>;
  92                                         #size-cells = <1>;
  93
  94                                         macaddr_art_1002: macaddr@1002 {
  95                                                 compatible = "mac-base";
  96                                                 reg = <0x1002 0x6>;
  97                                                 #nvmem-cell-cells = <1>;
  98                                         };
  99                                 };
 100                         };
 101                 };
 102         };
 103 };
 104
 105 &eth1 {
 106         status = "okay";
 107
 108         nvmem-cells = <&macaddr_art_1002 0x400000>;
 109         nvmem-cell-names = "mac-address";
 110 };
 111
 112 &mdio1 {
 113         status = "okay";
 114 };
 115
 116 &wmac {
 117         status = "okay";
 118
 119         mtd-cal-data = <&art 0x1000>;
 120 };