target/linux/ath79/dts/ar1022_sitecom_wlr-7100.dts

   1 // SPDX-License-Identifier: GPL-2.0-or-later OR MIT
   2
   3 #include "ar9344.dtsi"
   4
   5 #include <dt-bindings/gpio/gpio.h>
   6 #include <dt-bindings/input/input.h>
   7
   8 / {
   9         model = "Sitecom WLR-7100 v1 002 (X7 AC1200)";
  10         compatible = "sitecom,wlr-7100", "qca,ar9344";
  11
  12         aliases {
  13                 led-boot = &led_power;
  14                 led-failsafe = &led_power;
  15                 led-running = &led_power;
  16                 led-upgrade = &led_power;
  17         };
  18
  19         keys {
  20                 compatible = "gpio-keys";
  21
  22                 wlan2g {
  23                         label = "2.4GHz";
  24                         gpios = <&gpio 16 GPIO_ACTIVE_LOW>;
  25                         linux,code = <KEY_RESTART>;
  26                 };
  27
  28                 wlan5g {
  29                         label = "5GHz";
  30                         gpios = <&gpio 15 GPIO_ACTIVE_LOW>;
  31                         linux,code = <KEY_WPS_BUTTON>;
  32                 };
  33         };
  34
  35         leds {
  36                 compatible = "gpio-leds";
  37
  38                 ops {
  39                         label = "wlr-7100:white:ops";
  40                         gpios = <&gpio 12 GPIO_ACTIVE_LOW>;
  41                 };
  42
  43                 led_power: power {
  44                         label = "wlr-7100:amber:power";
  45                         gpios = <&gpio 2 GPIO_ACTIVE_LOW>;
  46                         default-state = "on";
  47                 };
  48
  49                 wlan2g {
  50                         label = "wlr-7100:blue:wlan2g";
  51                         gpios = <&gpio 14 GPIO_ACTIVE_LOW>;
  52                         linux,default-trigger = "phy1tpt";
  53                 };
  54         };
  55 };
  56
  57 &eth0 {
  58         status = "okay";
  59
  60         pll-data = <0x06000000 0x00000101 0x00001616>;
  61
  62         phy-mode = "rgmii";
  63         phy-handle = <&phy0>;
  64
  65         gmac-config {
  66                 device = <&gmac>;
  67                 rgmii-gmac0 = <1>;
  68         };
  69 };
  70
  71 &mdio0 {
  72         status = "okay";
  73
  74         phy0: ethernet-phy@0 {
  75                 reg = <0>;
  76                 phy-mode = "rgmii";
  77
  78                 qca,ar8327-initvals = <
  79                         0x04 0x87a00000 /* PORT0 PAD Mode */
  80                         0x0c 0x01000000 /* PORT6 PAD Mode */
  81                         0x10 0x80000000 /* PWS_REG_VALUE */
  82                         0x7c 0x000000fe /* PORT0_STATUS */
  83                         0x94 0x000000fe /* PORT6_STATUS */
  84                 >;
  85         };
  86 };
  87
  88 &pcie {
  89         status = "okay";
  90
  91         wifi@0,0 {
  92                 compatible = "qcom,ath10k";
  93                 reg = <0x0000 0 0 0 0>;
  94         };
  95 };
  96
  97 &ref {
  98         clock-frequency = <25000000>;
  99 };
 100
 101 &spi {
 102         status = "okay";
 103
 104         num-cs = <1>;
 105
 106         flash@0 {
 107                 compatible = "jedec,spi-nor";
 108                 reg = <0>;
 109                 spi-max-frequency = <25000000>;
 110
 111                 partitions {
 112                         compatible = "fixed-partitions";
 113                         #address-cells = <1>;
 114                         #size-cells = <1>;
 115
 116                         partition@0 {
 117                                 label = "u-boot";
 118                                 reg = <0x000000 0x030000>;
 119                                 read-only;
 120                         };
 121
 122                         uenv: partition@30000 {
 123                                 label = "u-boot-env";
 124                                 reg = <0x030000 0x010000>;
 125                                 read-only;
 126                         };
 127
 128                         partition@40000 {
 129                                 compatible = "denx,uimage";
 130                                 label = "firmware";
 131                                 reg = <0x040000 0x750000>;
 132                         };
 133
 134                         partition@790000 {
 135                                 label = "backup";
 136                                 reg = <0x790000 0x010000>;
 137                                 read-only;
 138                         };
 139
 140                         partition@7a0000 {
 141                                 label = "storage";
 142                                 reg = <0x7a0000 0x050000>;
 143                                 read-only;
 144                         };
 145
 146                         art: partition@7f0000 {
 147                                 label = "art";
 148                                 reg = <0x7f0000 0x010000>;
 149                                 read-only;
 150                         };
 151                 };
 152         };
 153 };
 154
 155 &uart {
 156         status = "okay";
 157 };
 158
 159 &usb {
 160         status = "okay";
 161 };
 162
 163 &usb_phy {
 164         status = "okay";
 165 };
 166
 167 &wmac {
 168         status = "okay";
 169
 170         qca,no-eeprom;
 171 };