2 * Copyright (C) 2018-2019, STMicroelectronics - All Rights Reserved
4 * SPDX-License-Identifier: BSD-3-Clause
7 #ifndef STM32MP_COMMON_H
8 #define STM32MP_COMMON_H
12 #include <platform_def.h>
14 /* Functions to save and get boot context address given by ROM code */
15 void stm32mp_save_boot_ctx_address(uintptr_t address
);
16 uintptr_t stm32mp_get_boot_ctx_address(void);
18 bool stm32mp_is_single_core(void);
19 bool stm32mp_is_closed_device(void);
21 /* Return the base address of the DDR controller */
22 uintptr_t stm32mp_ddrctrl_base(void);
24 /* Return the base address of the DDR PHY */
25 uintptr_t stm32mp_ddrphyc_base(void);
27 /* Return the base address of the PWR peripheral */
28 uintptr_t stm32mp_pwr_base(void);
30 /* Return the base address of the RCC peripheral */
31 uintptr_t stm32mp_rcc_base(void);
33 /* Check MMU status to allow spinlock use */
34 bool stm32mp_lock_available(void);
36 /* Get IWDG platform instance ID from peripheral IO memory base address */
37 uint32_t stm32_iwdg_get_instance(uintptr_t base
);
39 /* Return bitflag mask for expected IWDG configuration from OTP content */
40 uint32_t stm32_iwdg_get_otp_config(uint32_t iwdg_inst
);
42 #if defined(IMAGE_BL2)
43 /* Update OTP shadow registers with IWDG configuration from device tree */
44 uint32_t stm32_iwdg_shadow_update(uint32_t iwdg_inst
, uint32_t flags
);
48 * Platform util functions for the GPIO driver
49 * @bank: Target GPIO bank ID as per DT bindings
51 * Platform shall implement these functions to provide to stm32_gpio
52 * driver the resource reference for a target GPIO bank. That are
53 * memory mapped interface base address, interface offset (see below)
54 * and clock identifier.
56 * stm32_get_gpio_bank_offset() returns a bank offset that is used to
57 * check DT configuration matches platform implementation of the banks
60 uintptr_t stm32_get_gpio_bank_base(unsigned int bank
);
61 unsigned long stm32_get_gpio_bank_clock(unsigned int bank
);
62 uint32_t stm32_get_gpio_bank_offset(unsigned int bank
);
64 /* Print CPU information */
65 void stm32mp_print_cpuinfo(void);
67 /* Print board information */
68 void stm32mp_print_boardinfo(void);
71 * Util for clock gating and to get clock rate for stm32 and platform drivers
72 * @id: Target clock ID, ID used in clock DT bindings
74 bool stm32mp_clk_is_enabled(unsigned long id
);
75 void stm32mp_clk_enable(unsigned long id
);
76 void stm32mp_clk_disable(unsigned long id
);
77 unsigned long stm32mp_clk_get_rate(unsigned long id
);
79 /* Initialise the IO layer and register platform IO devices */
80 void stm32mp_io_setup(void);
83 * Check that the STM32 header of a .stm32 binary image is valid
84 * @param header: pointer to the stm32 image header
85 * @param buffer: address of the binary image (payload)
86 * @return: 0 on success, negative value in case of error
88 int stm32mp_check_header(boot_api_image_header_t
*header
, uintptr_t buffer
);
90 #endif /* STM32MP_COMMON_H */