mac80211: update to wireless-testing 2014-01-23
[openwrt/staging/stintel.git] / package / kernel / mac80211 / patches / 901-wlcore-set-irq_flags-in-the-board-files.patch
1 The platform_quirk element in the platform data was used to change the
2 way the IRQ is triggered. When set, the EDGE_IRQ quirk would change
3 the irqflags used and treat edge trigger differently from the rest.
4
5 Instead of hiding this irq flag setting behind the quirk, have the
6 board files set the flags during initialization. This will be more
7 meaningful than driver-specific quirks when we switch to DT.
8
9 Additionally, fix missing gpio_request() calls in the boarding files
10 (so that setting the flags actually works).
11
12 Cc: Tony Lindgren <tony@atomide.com>
13 Cc: Sekhar Nori <nsekhar@ti.com>
14 Signed-off-by: Luciano Coelho <coelho@ti.com>
15 Reviewed-by: Felipe Balbi <balbi@ti.com>
16 Acked-by: Sekhar Nori <nsekhar@ti.com>
17
18 --- a/drivers/net/wireless/ti/wlcore/debugfs.c
19 +++ b/drivers/net/wireless/ti/wlcore/debugfs.c
20 @@ -502,7 +502,7 @@ static ssize_t driver_state_read(struct
21 DRIVER_STATE_PRINT_HEX(irq);
22 /* TODO: ref_clock and tcxo_clock were moved to wl12xx priv */
23 DRIVER_STATE_PRINT_HEX(hw_pg_ver);
24 - DRIVER_STATE_PRINT_HEX(platform_quirks);
25 + DRIVER_STATE_PRINT_HEX(irq_flags);
26 DRIVER_STATE_PRINT_HEX(chip.id);
27 DRIVER_STATE_PRINT_STR(chip.fw_ver_str);
28 DRIVER_STATE_PRINT_STR(chip.phy_fw_ver_str);
29 --- a/drivers/net/wireless/ti/wlcore/main.c
30 +++ b/drivers/net/wireless/ti/wlcore/main.c
31 @@ -27,6 +27,7 @@
32 #include <linux/vmalloc.h>
33 #include <linux/wl12xx.h>
34 #include <linux/interrupt.h>
35 +#include <linux/irq.h>
36
37 #include "wlcore.h"
38 #include "debug.h"
39 @@ -528,7 +529,7 @@ static int wlcore_irq_locked(struct wl12
40 * In case edge triggered interrupt must be used, we cannot iterate
41 * more than once without introducing race conditions with the hardirq.
42 */
43 - if (wl->platform_quirks & WL12XX_PLATFORM_QUIRK_EDGE_IRQ)
44 + if (wl->irq_flags & IRQF_TRIGGER_RISING)
45 loopcount = 1;
46
47 wl1271_debug(DEBUG_IRQ, "IRQ work");
48 @@ -5901,7 +5902,6 @@ struct ieee80211_hw *wlcore_alloc_hw(siz
49 wl->ap_ps_map = 0;
50 wl->ap_fw_ps_map = 0;
51 wl->quirks = 0;
52 - wl->platform_quirks = 0;
53 wl->system_hlid = WL12XX_SYSTEM_HLID;
54 wl->active_sta_count = 0;
55 wl->active_link_count = 0;
56 @@ -6042,7 +6042,7 @@ static void wlcore_nvs_cb(const struct f
57 struct platform_device *pdev = wl->pdev;
58 struct wlcore_platdev_data *pdev_data = dev_get_platdata(&pdev->dev);
59 struct wl12xx_platform_data *pdata = pdev_data->pdata;
60 - unsigned long irqflags;
61 +
62 int ret;
63 irq_handler_t hardirq_fn = NULL;
64
65 @@ -6070,18 +6070,17 @@ static void wlcore_nvs_cb(const struct f
66 wlcore_adjust_conf(wl);
67
68 wl->irq = platform_get_irq(pdev, 0);
69 - wl->platform_quirks = pdata->platform_quirks;
70 wl->if_ops = pdev_data->if_ops;
71
72 - if (wl->platform_quirks & WL12XX_PLATFORM_QUIRK_EDGE_IRQ) {
73 - irqflags = IRQF_TRIGGER_RISING;
74 - hardirq_fn = wlcore_hardirq;
75 - } else {
76 - irqflags = IRQF_TRIGGER_HIGH | IRQF_ONESHOT;
77 - }
78 + wl->irq_flags = irq_get_trigger_type(wl->irq);
79 +
80 + hardirq_fn = wlcore_hardirq;
81 +
82 + /* Since we don't use the primary handler, we must set ONESHOT */
83 + wl->irq_flags |= IRQF_ONESHOT;
84
85 ret = request_threaded_irq(wl->irq, hardirq_fn, wlcore_irq,
86 - irqflags, pdev->name, wl);
87 + wl->irq_flags, pdev->name, wl);
88 if (ret < 0) {
89 wl1271_error("request_irq() failed: %d", ret);
90 goto out_free_nvs;
91 --- a/drivers/net/wireless/ti/wlcore/wlcore.h
92 +++ b/drivers/net/wireless/ti/wlcore/wlcore.h
93 @@ -186,6 +186,8 @@ struct wl1271 {
94
95 int irq;
96
97 + int irq_flags;
98 +
99 spinlock_t wl_lock;
100
101 enum wlcore_state state;
102 @@ -393,9 +395,6 @@ struct wl1271 {
103 /* Quirks of specific hardware revisions */
104 unsigned int quirks;
105
106 - /* Platform limitations */
107 - unsigned int platform_quirks;
108 -
109 /* number of currently active RX BA sessions */
110 int ba_rx_session_count;
111