package/kernel/linux/modules/can.mk

   1 #
   2 # Copyright (C) 2013 OpenWrt.org
   3 #
   4 # This is free software, licensed under the GNU General Public License v2.
   5 # See /LICENSE for more information.
   6 #
   7
   8 CAN_MENU:=CAN Support
   9
  10 define KernelPackage/can
  11   SUBMENU:=$(CAN_MENU)
  12   TITLE:=CAN bus support
  13   KCONFIG:=\
  14         CONFIG_CAN=m \
  15         CONFIG_CAN_DEV \
  16         CONFIG_CAN_CALC_BITTIMING=y \
  17         CONFIG_CAN_LEDS=y \
  18         CONFIG_CAN_AT91=n \
  19         CONFIG_CAN_TI_HECC=n \
  20         CONFIG_CAN_MCP251X=n \
  21         CONFIG_CAN_BFIN=n \
  22         CONFIG_CAN_JANZ_ICAN3=n \
  23         CONFIG_PCH_CAN=n \
  24         CONFIG_CAN_GRCAN=n \
  25         CONFIG_CAN_CC770=n \
  26         CONFIG_CAN_MSCAN=n \
  27         CONFIG_CAN_SJA1000=n \
  28         CONFIG_CAN_SOFTING=n \
  29         CONFIG_NET_EMATCH_CANID=n \
  30         CONFIG_CAN_DEBUG_DEVICES=n
  31   FILES:=$(LINUX_DIR)/drivers/net/can/dev/can-dev.ko \
  32          $(LINUX_DIR)/net/can/can.ko
  33   AUTOLOAD:=$(call AutoProbe,can can-dev)
  34 endef
  35
  36 define KernelPackage/can/description
  37  Kernel module for CAN bus support.
  38 endef
  39
  40 $(eval $(call KernelPackage,can))
  41
  42
  43 define AddDepends/can
  44   SUBMENU:=$(CAN_MENU)
  45   DEPENDS+=kmod-can $(1)
  46 endef
  47
  48
  49 define KernelPackage/can-bcm
  50   TITLE:=Broadcast Manager CAN Protcol
  51   KCONFIG:=CONFIG_CAN_BCM
  52   FILES:=$(LINUX_DIR)/net/can/can-bcm.ko
  53   AUTOLOAD:=$(call AutoProbe,can-bcm)
  54   $(call AddDepends/can)
  55 endef
  56
  57 define KernelPackage/can-bcm/description
  58  The Broadcast Manager offers content filtering, timeout monitoring,
  59  sending of RTR frames, and cyclic CAN messages without permanent user
  60  interaction.
  61 endef
  62
  63 $(eval $(call KernelPackage,can-bcm))
  64
  65
  66 define KernelPackage/can-c-can
  67   TITLE:=BOSCH C_CAN/D_CAN drivers
  68   KCONFIG:=CONFIG_CAN_C_CAN
  69   FILES:=$(LINUX_DIR)/drivers/net/can/c_can/c_can.ko
  70   AUTOLOAD:=$(call AutoProbe,c_can)
  71   $(call AddDepends/can)
  72 endef
  73
  74 define KernelPackage/can-c-can/description
  75  This driver adds generic support for the C_CAN/D_CAN chips.
  76 endef
  77
  78 $(eval $(call KernelPackage,can-c-can))
  79
  80
  81 define KernelPackage/can-c-can-pci
  82   TITLE:=PCI Bus based BOSCH C_CAN/D_CAN driver
  83   KCONFIG:=CONFIG_CAN_C_CAN_PCI
  84   DEPENDS:=kmod-can-c-can @PCI_SUPPORT
  85   FILES:=$(LINUX_DIR)/drivers/net/can/c_can/c_can_pci.ko
  86   AUTOLOAD:=$(call AutoProbe,c_can_pci)
  87   $(call AddDepends/can)
  88 endef
  89
  90 define KernelPackage/can-c-can-pci/description
  91  This driver adds support for the C_CAN/D_CAN chips connected
  92  to the PCI bus.
  93 endef
  94
  95 $(eval $(call KernelPackage,can-c-can-pci))
  96
  97
  98 define KernelPackage/can-c-can-platform
  99   TITLE:=Platform Bus based BOSCH C_CAN/D_CAN driver
 100   KCONFIG:=CONFIG_CAN_C_CAN_PLATFORM
 101   DEPENDS:=kmod-can-c-can +kmod-regmap-core
 102   FILES:=$(LINUX_DIR)/drivers/net/can/c_can/c_can_platform.ko
 103   AUTOLOAD:=$(call AutoProbe,c_can_platform)
 104   $(call AddDepends/can)
 105 endef
 106
 107 define KernelPackage/can-c-can-platform/description
 108  This driver adds support for the C_CAN/D_CAN chips connected
 109  to the "platform bus" (Linux abstraction for directly to the
 110  processor attached devices) which can be found on various
 111  boards from ST Microelectronics (http://www.st.com) like the
 112  SPEAr1310 and SPEAr320 evaluation boards & TI (www.ti.com)
 113  boards like am335x, dm814x, dm813x and dm811x.
 114 endef
 115
 116 $(eval $(call KernelPackage,can-c-can-platform))
 117
 118
 119 define KernelPackage/can-flexcan
 120   TITLE:=Support for Freescale FLEXCAN based chips
 121   KCONFIG:=CONFIG_CAN_FLEXCAN
 122   FILES:= \
 123         $(LINUX_DIR)/drivers/net/can/flexcan.ko@lt5.17 \
 124         $(LINUX_DIR)/drivers/net/can/flexcan/flexcan.ko@ge5.17
 125   AUTOLOAD:=$(call AutoProbe,flexcan)
 126   $(call AddDepends/can,@TARGET_imx)
 127 endef
 128
 129 define KernelPackage/can-flexcan/description
 130  Freescale FLEXCAN CAN bus controller implementation.
 131 endef
 132
 133 $(eval $(call KernelPackage,can-flexcan))
 134
 135
 136 define KernelPackage/can-gw
 137   TITLE:=CAN Gateway/Router
 138   KCONFIG:=CONFIG_CAN_GW
 139   FILES:=$(LINUX_DIR)/net/can/can-gw.ko
 140   AUTOLOAD:=$(call AutoProbe,can-gw)
 141   $(call AddDepends/can)
 142 endef
 143
 144 define KernelPackage/can-gw/description
 145  The CAN Gateway/Router is used to route (and modify) CAN frames.
 146 endef
 147
 148 $(eval $(call KernelPackage,can-gw))
 149
 150
 151 define KernelPackage/can-mcp251x
 152   TITLE:=MCP251x SPI CAN controller
 153   KCONFIG:=\
 154         CONFIG_SPI=y \
 155         CONFIG_CAN_MCP251X
 156   FILES:=$(LINUX_DIR)/drivers/net/can/spi/mcp251x.ko
 157   AUTOLOAD:=$(call AutoProbe,mcp251x)
 158   $(call AddDepends/can)
 159 endef
 160
 161 define KernelPackage/can-mcp251x/description
 162  Microchip MCP251x SPI CAN controller
 163 endef
 164
 165 $(eval $(call KernelPackage,can-mcp251x))
 166
 167
 168 define KernelPackage/can-raw
 169   TITLE:=Raw CAN Protcol
 170   KCONFIG:=CONFIG_CAN_RAW
 171   FILES:=$(LINUX_DIR)/net/can/can-raw.ko
 172   AUTOLOAD:=$(call AutoProbe,can-raw)
 173   $(call AddDepends/can)
 174 endef
 175
 176 define KernelPackage/can-raw/description
 177  The raw CAN protocol option offers access to the CAN bus via
 178  the BSD  socket API.
 179 endef
 180
 181 $(eval $(call KernelPackage,can-raw))
 182
 183
 184 define KernelPackage/can-slcan
 185   TITLE:=Serial / USB serial CAN Adaptors (slcan)
 186   KCONFIG:=CONFIG_CAN_SLCAN
 187   FILES:= \
 188         $(LINUX_DIR)/drivers/net/can/slcan.ko@lt6.0 \
 189         $(LINUX_DIR)/drivers/net/can/slcan/slcan.ko@ge6.0
 190   AUTOLOAD:=$(call AutoProbe,slcan)
 191   $(call AddDepends/can)
 192 endef
 193
 194 define KernelPackage/can-slcan/description
 195  CAN driver for several 'low cost' CAN interfaces that are attached
 196  via serial lines or via USB-to-serial adapters using the LAWICEL
 197  ASCII protocol.
 198 endef
 199
 200 $(eval $(call KernelPackage,can-slcan))
 201
 202
 203 define KernelPackage/can-usb-8dev
 204   TITLE:=8 devices USB2CAN interface
 205   KCONFIG:=CONFIG_CAN_8DEV_USB
 206   FILES:=$(LINUX_DIR)/drivers/net/can/usb/usb_8dev.ko
 207   AUTOLOAD:=$(call AutoProbe,usb_8dev)
 208   $(call AddDepends/can,+kmod-usb-core)
 209 endef
 210
 211 define KernelPackage/can-usb-8dev/description
 212  This driver supports the USB2CAN interface
 213  from 8 devices (http://www.8devices.com).
 214 endef
 215
 216 $(eval $(call KernelPackage,can-usb-8dev))
 217
 218
 219 define KernelPackage/can-usb-ems
 220   TITLE:=EMS CPC-USB/ARM7 CAN/USB interface
 221   KCONFIG:=CONFIG_CAN_EMS_USB
 222   FILES:=$(LINUX_DIR)/drivers/net/can/usb/ems_usb.ko
 223   AUTOLOAD:=$(call AutoProbe,ems_usb)
 224   $(call AddDepends/can,+kmod-usb-core)
 225 endef
 226
 227 define KernelPackage/can-usb-ems/description
 228  This driver is for the one channel CPC-USB/ARM7 CAN/USB interface
 229  from EMS Dr. Thomas Wuensche (http://www.ems-wuensche.de).
 230 endef
 231
 232 $(eval $(call KernelPackage,can-usb-ems))
 233
 234
 235 define KernelPackage/can-usb-esd
 236   TITLE:=ESD USB/2 CAN/USB interface
 237   KCONFIG:=CONFIG_CAN_ESD_USB2
 238   FILES:=$(LINUX_DIR)/drivers/net/can/usb/esd_usb2.ko
 239   AUTOLOAD:=$(call AutoProbe,esd_usb2)
 240   $(call AddDepends/can,+kmod-usb-core)
 241 endef
 242
 243 define KernelPackage/can-usb-esd/description
 244  This driver supports the CAN-USB/2 interface
 245  from esd electronic system design gmbh (http://www.esd.eu).
 246 endef
 247
 248 $(eval $(call KernelPackage,can-usb-esd))
 249
 250
 251 define KernelPackage/can-usb-kvaser
 252   TITLE:=Kvaser CAN/USB interface
 253   KCONFIG:=CONFIG_CAN_KVASER_USB
 254   FILES:= \
 255         $(LINUX_DIR)/drivers/net/can/usb/kvaser_usb/kvaser_usb.ko
 256   AUTOLOAD:=$(call AutoProbe,kvaser_usb)
 257   $(call AddDepends/can,+kmod-usb-core)
 258 endef
 259
 260 define KernelPackage/can-usb-kvaser/description
 261  This driver adds support for Kvaser CAN/USB devices like Kvaser
 262  Leaf Light.
 263 endef
 264
 265 $(eval $(call KernelPackage,can-usb-kvaser))
 266
 267
 268 define KernelPackage/can-usb-peak
 269   TITLE:=PEAK PCAN-USB/USB Pro interfaces
 270   KCONFIG:=CONFIG_CAN_PEAK_USB
 271   FILES:=$(LINUX_DIR)/drivers/net/can/usb/peak_usb/peak_usb.ko
 272   AUTOLOAD:=$(call AutoProbe,peak_usb)
 273   $(call AddDepends/can,+kmod-usb-core)
 274 endef
 275
 276 define KernelPackage/can-usb-peak/description
 277  This driver supports the PCAN-USB and PCAN-USB Pro adapters
 278  from PEAK-System Technik (http://www.peak-system.com).
 279 endef
 280
 281 $(eval $(call KernelPackage,can-usb-peak))
 282
 283
 284 define KernelPackage/can-vcan
 285   TITLE:=Virtual Local CAN Interface (vcan)
 286   KCONFIG:=CONFIG_CAN_VCAN
 287   FILES:=$(LINUX_DIR)/drivers/net/can/vcan.ko
 288   AUTOLOAD:=$(call AutoProbe,vcan)
 289   $(call AddDepends/can)
 290 endef
 291
 292 define KernelPackage/can-vcan/description
 293  Similar to the network loopback devices, vcan offers a
 294  virtual local CAN interface.
 295 endef
 296
 297 $(eval $(call KernelPackage,can-vcan))
 298
 299 define KernelPackage/can-xilinx-can
 300   TITLE:=Xilinx CAN IP
 301   KCONFIG:=CONFIG_CAN_XILINXCAN
 302   FILES:=$(LINUX_DIR)/drivers/net/can/xilinx_can.ko
 303   AUTOLOAD:=$(call AutoProbe,xilinx_can)
 304   $(call AddDepends/can,@TARGET_zynq)
 305 endef
 306
 307 define KernelPackage/can-xilinx-can/description
 308  Xilinx CAN driver. This driver supports both
 309  soft AXI CAN IP and Zynq CANPS IP.
 310 endef
 311
 312 $(eval $(call KernelPackage,can-xilinx-can))