ramips: add support for ZyXEL Keenetic Viva

Factory image can be installed via Zyxel WebUI.

Signed-off-by: Vitaly Chekryzhev <13hakta@gmail.com>
[removed linux,modalias parameter from flash node in dts]
[removed sdhci node from dts; no sd card slot here]
Signed-off-by: Mathias Kresin <dev@kresin.me>

diff --git a/target/linux/ramips/base-files/etc/board.d/01_leds b/target/linux/ramips/base-files/etc/board.d/01_leds
index 0f1ad57f55c74917df0847fe179c82824ec54010..ed51555d38c9c2036ea437d43a6478ce19eb2f78 100755 (executable)
--- a/target/linux/ramips/base-files/etc/board.d/01_leds
+++ b/target/linux/ramips/base-files/etc/board.d/01_leds
@@ -203,6 +203,10 @@ ht-tm02)
        ucidef_set_led_netdev "eth" "Ethernet" "$board:green:lan" "eth0"
        set_wifi_led "$board:blue:wlan"
        ;;
+kng_rc)
+       set_usb_led "$board:green:usb"
+       set_wifi_led "$board:green:wifi"
+       ;;
 m2m)
        set_wifi_led "$board:blue:wifi"
        ucidef_set_led_netdev "eth" "Ethernet" "$board:green:wan" "eth0"

diff --git a/target/linux/ramips/base-files/etc/board.d/02_network b/target/linux/ramips/base-files/etc/board.d/02_network
index 1e97c3b3c20700722e6a07fb95e8888c9353f02a..5ae6413fcf87340646965511bd12e069ab1f09b7 100755 (executable)
--- a/target/linux/ramips/base-files/etc/board.d/02_network
+++ b/target/linux/ramips/base-files/etc/board.d/02_network
@@ -204,6 +204,10 @@ ramips_setup_interfaces()
                ucidef_add_switch "switch0" \
                        "1:lan" "2:lan" "3:lan" "4:lan" "5:lan" "0:wan" "6@eth0"
                ;;
+       kng_rc)
+               ucidef_add_switch "switch1" \
+                       "0:lan" "1:lan" "2:lan" "3:lan" "4:wan" "7t@eth0"
+               ;;
        mlwg2|\
        wizard8800|\
        wl-330n)
@@ -320,6 +324,9 @@ ramips_setup_macs()
                [ -n "$lan_mac" ] || lan_mac=$(cat /sys/class/net/eth0/address)
                wan_mac=$(macaddr_add "$lan_mac" 1)
                ;;
+       kng_rc)
+               wan_mac=$(mtd_get_mac_binary factory 28)
+               ;;
        linkits7688 | \
        linkits7688d)
                wan_mac=$(mtd_get_mac_binary factory 4)

diff --git a/target/linux/ramips/base-files/etc/diag.sh b/target/linux/ramips/base-files/etc/diag.sh
index 52baa0b23e9c563eb3f6ec8799c0a9093d38beb5..1aa1a2e9fb057c27b3825e35d65544eecca73f43 100644 (file)
--- a/target/linux/ramips/base-files/etc/diag.sh
+++ b/target/linux/ramips/base-files/etc/diag.sh
@@ -24,6 +24,7 @@ get_status_led() {
        dir-860l-b1|\
        e1700|\
        fonera20n|\
+       kng_rc|\
        mzk-750dhp|\
        mzk-dp150n|\
        mzk-w300nh2|\

diff --git a/target/linux/ramips/base-files/lib/ramips.sh b/target/linux/ramips/base-files/lib/ramips.sh
index c62f5f6a9389330b566e78cea88e878e2cba1350..4a4204bc24047fa74ca089a65b56d8446547dcac 100755 (executable)
--- a/target/linux/ramips/base-files/lib/ramips.sh
+++ b/target/linux/ramips/base-files/lib/ramips.sh
@@ -586,6 +586,9 @@ ramips_board_detect() {
        *"ZBT-WR8305RT")
                name="zbt-wr8305rt"
                ;;
+       *"ZyXEL Keenetic Viva")
+               name="kng_rc"
+               ;;
        *"YK1")
                name="youku-yk1"
                ;;

diff --git a/target/linux/ramips/base-files/lib/upgrade/platform.sh b/target/linux/ramips/base-files/lib/upgrade/platform.sh
index fa108b6ce4da06973f50e67615cd20489584e665..a7e9e19fa54f890ee0ead752fb97986c87af8d94 100755 (executable)
--- a/target/linux/ramips/base-files/lib/upgrade/platform.sh
+++ b/target/linux/ramips/base-files/lib/upgrade/platform.sh
@@ -70,6 +70,7 @@ platform_check_image() {
        jhr-n805r|\
        jhr-n825r|\
        jhr-n926r|\
+       kng_rc|\
        linkits7688|\
        linkits7688d|\
        m2m|\

diff --git a/target/linux/ramips/dts/kng_rc.dts b/target/linux/ramips/dts/kng_rc.dts
new file mode 100644 (file)
index 0000000..fefa1b7
--- /dev/null
+++ b/target/linux/ramips/dts/kng_rc.dts
@@ -0,0 +1,154 @@
+/dts-v1/;
+
+#include "mt7620a.dtsi"
+
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/input/input.h>
+
+/ {
+       model = "ZyXEL Keenetic Viva";
+
+       gpio-leds {
+               compatible = "gpio-leds";
+
+               wan {
+                       label = "kng_rc:green:wan";
+                       gpios = <&gpio0 7 GPIO_ACTIVE_LOW>;
+               };
+
+               usb {
+                       label = "kng_rc:green:usb";
+                       gpios = <&gpio0 8 GPIO_ACTIVE_LOW>;
+               };
+
+               power_alert {
+                       label = "kng_rc:red:power";
+                       gpios = <&gpio0 10 GPIO_ACTIVE_LOW>;
+               };
+
+               wifi {
+                       label = "kng_rc:green:wifi";
+                       gpios = <&gpio0 11 GPIO_ACTIVE_LOW>;
+               };
+
+               power {
+                       label = "kng_rc:green:power";
+                       gpios = <&gpio0 14 GPIO_ACTIVE_LOW>;
+               };
+       };
+
+       gpio-keys-polled {
+               compatible = "gpio-keys";
+               #address-cells = <1>;
+               #size-cells = <0>;
+               poll-interval = <20>;
+
+               reset {
+                       label = "reset";
+                       gpios = <&gpio0 1 GPIO_ACTIVE_LOW>;
+                       linux,code = <KEY_RESTART>;
+               };
+
+               wps {
+                       label = "wps";
+                       gpios = <&gpio0 2 GPIO_ACTIVE_LOW>;
+                       linux,code = <KEY_WPS_BUTTON>;
+               };
+
+               fn {
+                       label = "fn";
+                       gpios = <&gpio0 9 GPIO_ACTIVE_LOW>;
+                       linux,code = <BTN_0>;
+               };
+       };
+
+       rtl8367rb {
+               compatible = "realtek,rtl8367b";
+               cpu_port = <7>;
+               realtek,extif2 = <1 0 1 1 1 1 1 1 2>;
+               mdio = <&mdio0>;
+       };
+};
+
+&spi0 {
+       status = "okay";
+
+       m25p80@0 {
+               #address-cells = <1>;
+               #size-cells = <1>;
+               compatible = "jedec,spi-nor";
+               reg = <0>;
+               spi-max-frequency = <10000000>;
+
+               partition@0 {
+                       label = "u-boot";
+                       reg = <0x0 0x30000>;
+                       read-only;
+               };
+
+               partition@30000 {
+                       label = "u-boot-env";
+                       reg = <0x30000 0x10000>;
+                       read-only;
+               };
+
+               factory: partition@40000 {
+                       label = "factory";
+                       reg = <0x40000 0x10000>;
+                       read-only;
+               };
+
+               partition@50000 {
+                       label = "firmware";
+                       reg = <0x50000 0xfb0000>;
+               };
+       };
+};
+
+&pinctrl {
+       state_default: pinctrl0 {
+               gpio {
+                       ralink,group = "i2c", "uartf";
+                       ralink,function = "gpio";
+               };
+       };
+};
+
+&ethernet {
+       status = "okay";
+       pinctrl-names = "default";
+       pinctrl-0 = <&rgmii2_pins &mdio_pins>;
+       mtd-mac-address = <&factory 0x00004>;
+
+       port@4 {
+               status = "okay";
+               mediatek,fixed-link = <1000 1 1 1>;
+               phy-mode = "rgmii";
+               phy-handle = <&phy4>;
+       };
+
+       mdio0: mdio-bus {
+               status = "okay";
+
+               phy4: ethernet-phy@4 {
+                       reg = <4>;
+                       phy-mode = "rgmii";
+               };
+       };
+};
+
+&gsw {
+       mediatek,port4 = "gmac";
+};
+
+&wmac {
+       ralink,mtd-eeprom = <&factory 0>;
+};
+
+&ehci {
+       status = "okay";
+};
+
+&ohci {
+       status = "okay";
+};

diff --git a/target/linux/ramips/image/mt7620.mk b/target/linux/ramips/image/mt7620.mk
index 35c94fee8b58acc09dd5d7b6d9381addb91b7e26..e669b8c9ca9f46b10f108f4f6cd68672dfdb4109 100644 (file)
--- a/target/linux/ramips/image/mt7620.mk
+++ b/target/linux/ramips/image/mt7620.mk
@@ -37,6 +37,10 @@ define Build/elecom-header
        $(STAGING_DIR_HOST)/bin/tar -cf $@ -C $(KDIR) v_0.0.0.bin v_0.0.0.md5
 endef
 
+define Build/zyimage
+       $(STAGING_DIR_HOST)/bin/zyimage $(1) $@
+endef
+
 define Device/ArcherC20i
   DTS := ArcherC20i
   KERNEL := $(KERNEL_DTB)
@@ -418,3 +422,13 @@ define Device/dch-m225
   DEVICE_PACKAGES := kmod-mt76
 endef
 TARGET_DEVICES += dch-m225
+
+define Device/kng_rc
+  DTS := kng_rc
+  IMAGE_SIZE := $(ralink_default_fw_size_16M)
+  DEVICE_TITLE := ZyXEL Keenetic Viva
+  DEVICE_PACKAGES := kmod-usb2 kmod-usb-ohci kmod-usb-ledtrig-usbport kmod-switch-rtl8366-smi kmod-switch-rtl8367b
+  IMAGES += factory.bin
+  IMAGE/factory.bin := $$(IMAGE/sysupgrade.bin) | zyimage -d 8997 -v "ZyXEL Keenetic Viva"
+endef
+TARGET_DEVICES += kng_rc