ROM code -> BL2 (compiled with BL2_AT_EL3) -> BL32 (SP_min) -> BL33 (U-Boot)
+or if Op-TEE is used:
+
+ROM code -> BL2 (compiled with BL2_AT_EL3) -> OP-TEE -> BL33 (U-Boot)
+
Build Instructions
------------------
-To build:
+To build with SP_min:
.. code:: bash
make DEVICE_TREE=stm32mp157c-ev1 all
./tools/mkimage -T stm32image -a 0xC0100000 -e 0xC0100000 -d u-boot.bin u-boot.stm32
+To build TF-A with with Op-TEE support:
+
+.. code:: bash
+
+ make CROSS_COMPILE=arm-linux-gnueabihf- PLAT=stm32mp1 ARCH=aarch32 ARM_ARCH_MAJOR=7 AARCH32_SP=optee
+
The following build options are supported:
- ``ENABLE_STACK_PROTECTOR``: To enable the stack protection.
static uintptr_t storage_dev_handle;
static const io_dev_connector_t *mmc_dev_con;
+#ifdef AARCH32_SP_OPTEE
+static const struct stm32image_part_info optee_header_partition_spec = {
+ .name = OPTEE_HEADER_IMAGE_NAME,
+ .binary_type = OPTEE_HEADER_BINARY_TYPE,
+};
+
+static const struct stm32image_part_info optee_pager_partition_spec = {
+ .name = OPTEE_PAGER_IMAGE_NAME,
+ .binary_type = OPTEE_PAGER_BINARY_TYPE,
+};
+
+static const struct stm32image_part_info optee_paged_partition_spec = {
+ .name = OPTEE_PAGED_IMAGE_NAME,
+ .binary_type = OPTEE_PAGED_BINARY_TYPE,
+};
+#else
static const io_block_spec_t bl32_block_spec = {
.offset = BL32_BASE,
.length = STM32MP_BL32_SIZE
};
+#endif
static const io_block_spec_t bl2_block_spec = {
.offset = BL2_BASE,
enum {
IMG_IDX_BL33,
+#ifdef AARCH32_SP_OPTEE
+ IMG_IDX_OPTEE_HEADER,
+ IMG_IDX_OPTEE_PAGER,
+ IMG_IDX_OPTEE_PAGED,
+#endif
IMG_IDX_NUM
};
.name = BL33_IMAGE_NAME,
.binary_type = BL33_BINARY_TYPE,
},
+#ifdef AARCH32_SP_OPTEE
+ .part_info[IMG_IDX_OPTEE_HEADER] = {
+ .name = OPTEE_HEADER_IMAGE_NAME,
+ .binary_type = OPTEE_HEADER_BINARY_TYPE,
+ },
+ .part_info[IMG_IDX_OPTEE_PAGER] = {
+ .name = OPTEE_PAGER_IMAGE_NAME,
+ .binary_type = OPTEE_PAGER_BINARY_TYPE,
+ },
+ .part_info[IMG_IDX_OPTEE_PAGED] = {
+ .name = OPTEE_PAGED_IMAGE_NAME,
+ .binary_type = OPTEE_PAGED_BINARY_TYPE,
+ },
+#endif
};
static io_block_spec_t stm32image_block_spec = {
.image_spec = (uintptr_t)&bl2_block_spec,
.check = open_dummy
},
+#ifdef AARCH32_SP_OPTEE
+ [BL32_IMAGE_ID] = {
+ .dev_handle = &image_dev_handle,
+ .image_spec = (uintptr_t)&optee_header_partition_spec,
+ .check = open_image
+ },
+ [BL32_EXTRA1_IMAGE_ID] = {
+ .dev_handle = &image_dev_handle,
+ .image_spec = (uintptr_t)&optee_pager_partition_spec,
+ .check = open_image
+ },
+ [BL32_EXTRA2_IMAGE_ID] = {
+ .dev_handle = &image_dev_handle,
+ .image_spec = (uintptr_t)&optee_paged_partition_spec,
+ .check = open_image
+ },
+#else
[BL32_IMAGE_ID] = {
.dev_handle = &dummy_dev_handle,
.image_spec = (uintptr_t)&bl32_block_spec,
.check = open_dummy
},
+#endif
[BL33_IMAGE_ID] = {
.dev_handle = &image_dev_handle,
.image_spec = (uintptr_t)&bl33_partition_spec,
#include <drivers/st/stm32mp1_pwr.h>
#include <drivers/st/stm32mp1_ram.h>
#include <lib/mmio.h>
+#include <lib/optee_utils.h>
#include <lib/xlat_tables/xlat_tables_v2.h>
#include <plat/common/platform.h>
panic();
}
+#ifdef AARCH32_SP_OPTEE
+ INFO("BL2 runs OP-TEE setup\n");
+ /* Initialize tzc400 after DDR initialization */
+ stm32mp1_security_setup();
+#else
INFO("BL2 runs SP_MIN setup\n");
+#endif
}
void bl2_el3_plat_arch_setup(void)
BL_CODE_END - BL_CODE_BASE,
MT_CODE | MT_SECURE);
+#ifdef AARCH32_SP_OPTEE
+ /* OP-TEE image needs post load processing: keep RAM read/write */
+ mmap_add_region(STM32MP_DDR_BASE + dt_get_ddr_size() -
+ STM32MP_DDR_S_SIZE - STM32MP_DDR_SHMEM_SIZE,
+ STM32MP_DDR_BASE + dt_get_ddr_size() -
+ STM32MP_DDR_S_SIZE - STM32MP_DDR_SHMEM_SIZE,
+ STM32MP_DDR_S_SIZE,
+ MT_MEMORY | MT_RW | MT_SECURE);
+
+ mmap_add_region(STM32MP_OPTEE_BASE, STM32MP_OPTEE_BASE,
+ STM32MP_OPTEE_SIZE,
+ MT_MEMORY | MT_RW | MT_SECURE);
+#else
/* Prevent corruption of preloaded BL32 */
mmap_add_region(BL32_BASE, BL32_BASE,
BL32_LIMIT - BL32_BASE,
MT_MEMORY | MT_RO | MT_SECURE);
+#endif
/* Map non secure DDR for BL33 load and DDR training area restore */
mmap_add_region(STM32MP_DDR_BASE,
STM32MP_DDR_BASE,
stm32mp_io_setup();
}
+
+#if defined(AARCH32_SP_OPTEE)
+/*******************************************************************************
+ * This function can be used by the platforms to update/use image
+ * information for given `image_id`.
+ ******************************************************************************/
+int bl2_plat_handle_post_image_load(unsigned int image_id)
+{
+ int err = 0;
+ bl_mem_params_node_t *bl_mem_params = get_bl_mem_params_node(image_id);
+ bl_mem_params_node_t *bl32_mem_params;
+ bl_mem_params_node_t *pager_mem_params;
+ bl_mem_params_node_t *paged_mem_params;
+
+ assert(bl_mem_params != NULL);
+
+ switch (image_id) {
+ case BL32_IMAGE_ID:
+ bl_mem_params->ep_info.pc =
+ bl_mem_params->image_info.image_base;
+
+ pager_mem_params = get_bl_mem_params_node(BL32_EXTRA1_IMAGE_ID);
+ assert(pager_mem_params != NULL);
+ pager_mem_params->image_info.image_base = STM32MP_OPTEE_BASE;
+ pager_mem_params->image_info.image_max_size =
+ STM32MP_OPTEE_SIZE;
+
+ paged_mem_params = get_bl_mem_params_node(BL32_EXTRA2_IMAGE_ID);
+ assert(paged_mem_params != NULL);
+ paged_mem_params->image_info.image_base = STM32MP_DDR_BASE +
+ (dt_get_ddr_size() - STM32MP_DDR_S_SIZE -
+ STM32MP_DDR_SHMEM_SIZE);
+ paged_mem_params->image_info.image_max_size =
+ STM32MP_DDR_S_SIZE;
+
+ err = parse_optee_header(&bl_mem_params->ep_info,
+ &pager_mem_params->image_info,
+ &paged_mem_params->image_info);
+ if (err) {
+ ERROR("OPTEE header parse error.\n");
+ panic();
+ }
+
+ /* Set optee boot info from parsed header data */
+ bl_mem_params->ep_info.pc =
+ pager_mem_params->image_info.image_base;
+ bl_mem_params->ep_info.args.arg0 =
+ paged_mem_params->image_info.image_base;
+ bl_mem_params->ep_info.args.arg1 = 0; /* Unused */
+ bl_mem_params->ep_info.args.arg2 = 0; /* No DT supported */
+ break;
+
+ case BL33_IMAGE_ID:
+ bl32_mem_params = get_bl_mem_params_node(BL32_IMAGE_ID);
+ assert(bl32_mem_params != NULL);
+ bl32_mem_params->ep_info.lr_svc = bl_mem_params->ep_info.pc;
+ break;
+
+ default:
+ /* Do nothing in default case */
+ break;
+ }
+
+ return err;
+}
+#endif
#define PLATFORM_STACK_SIZE 0xC00
#endif
+#ifdef AARCH32_SP_OPTEE
+#define OPTEE_HEADER_IMAGE_NAME "teeh"
+#define OPTEE_PAGED_IMAGE_NAME "teed"
+#define OPTEE_PAGER_IMAGE_NAME "teex"
+#define OPTEE_HEADER_BINARY_TYPE U(0x20)
+#define OPTEE_PAGER_BINARY_TYPE U(0x21)
+#define OPTEE_PAGED_BINARY_TYPE U(0x22)
+#endif
+
/* SSBL = second stage boot loader */
#define BL33_IMAGE_NAME "ssbl"
#define BL33_BINARY_TYPE U(0x0)
/*******************************************************************************
* BL32 specific defines.
******************************************************************************/
+#ifndef AARCH32_SP_OPTEE
#define BL32_BASE STM32MP_BL32_BASE
#define BL32_LIMIT (STM32MP_BL32_BASE + \
STM32MP_BL32_SIZE)
+#endif
/*******************************************************************************
* BL33 specific defines.
VERSION_2, entry_point_info_t,
SECURE | EXECUTABLE | EP_FIRST_EXE),
+#if !defined(AARCH32_SP_OPTEE)
.ep_info.pc = BL32_BASE,
+#endif
.ep_info.spsr = SPSR_MODE32(MODE32_svc, SPSR_T_ARM,
SPSR_E_LITTLE,
DISABLE_ALL_EXCEPTIONS),
SET_STATIC_PARAM_HEAD(image_info, PARAM_EP,
VERSION_2, image_info_t,
IMAGE_ATTRIB_PLAT_SETUP),
-
+#if defined(AARCH32_SP_OPTEE)
+ /* optee header is loaded in SYSRAM above BL2 */
+ .image_info.image_base = STM32MP_OPTEE_BASE,
+ .image_info.image_max_size = STM32MP_OPTEE_SIZE,
+#else
.image_info.image_base = BL32_BASE,
.image_info.image_max_size = BL32_LIMIT - BL32_BASE,
-
+#endif
.next_handoff_image_id = BL33_IMAGE_ID,
},
+#if defined(AARCH32_SP_OPTEE)
+ /* Fill BL32 external 1 image related information */
+ {
+ .image_id = BL32_EXTRA1_IMAGE_ID,
+
+ SET_STATIC_PARAM_HEAD(ep_info, PARAM_EP,
+ VERSION_2, entry_point_info_t,
+ SECURE | NON_EXECUTABLE),
+
+ SET_STATIC_PARAM_HEAD(image_info, PARAM_EP,
+ VERSION_2, image_info_t,
+ IMAGE_ATTRIB_SKIP_LOADING),
+
+ .next_handoff_image_id = INVALID_IMAGE_ID,
+ },
+ /* Fill BL32 external 2 image related information */
+ {
+ .image_id = BL32_EXTRA2_IMAGE_ID,
+
+ SET_STATIC_PARAM_HEAD(ep_info, PARAM_EP,
+ VERSION_2, entry_point_info_t,
+ SECURE | NON_EXECUTABLE),
+
+ SET_STATIC_PARAM_HEAD(image_info, PARAM_EP,
+ VERSION_2, image_info_t,
+ IMAGE_ATTRIB_SKIP_LOADING),
+
+ .next_handoff_image_id = INVALID_IMAGE_ID,
+ },
+#endif /* AARCH32_SP_OPTEE */
+
/* Fill BL33 related information */
{
.image_id = BL33_IMAGE_ID,
# Number of TF-A copies in the device
STM32_TF_A_COPIES := 2
$(eval $(call add_define,STM32_TF_A_COPIES))
+ifeq ($(AARCH32_SP),optee)
+PLAT_PARTITION_MAX_ENTRIES := $(shell echo $$(($(STM32_TF_A_COPIES) + 4)))
+else
PLAT_PARTITION_MAX_ENTRIES := $(shell echo $$(($(STM32_TF_A_COPIES) + 1)))
+endif
$(eval $(call add_define,PLAT_PARTITION_MAX_ENTRIES))
PLAT_INCLUDES := -Iplat/st/common/include/
plat/st/stm32mp1/plat_bl2_mem_params_desc.c \
plat/st/stm32mp1/plat_image_load.c
+ifeq ($(AARCH32_SP),optee)
+BL2_SOURCES += lib/optee/optee_utils.c
+endif
+
# Macros and rules to build TF binary
STM32_TF_ELF_LDFLAGS := --hash-style=gnu --as-needed
STM32_DT_BASENAME := $(DTB_FILE_NAME:.dtb=)
*(.bl2_image*)
__BL2_IMAGE_END__ = .;
+#ifndef AARCH32_SP_OPTEE
/*
* bl32 will be settled by bl2.
* The strongest and only alignment constraint is 8 words to simplify
__BL32_IMAGE_START__ = .;
*(.bl32_image*)
__BL32_IMAGE_END__ = .;
+#endif
__DATA_END__ = .;
} >RAM
/* DDR configuration */
#define STM32MP_DDR_BASE U(0xC0000000)
#define STM32MP_DDR_MAX_SIZE U(0x40000000) /* Max 1GB */
+#ifdef AARCH32_SP_OPTEE
+#define STM32MP_DDR_S_SIZE U(0x01E00000) /* 30 MB */
+#define STM32MP_DDR_SHMEM_SIZE U(0x00200000) /* 2 MB */
+#endif
/* DDR power initializations */
#ifndef __ASSEMBLY__
(STM32MP_PARAM_LOAD_SIZE + \
STM32MP_HEADER_SIZE))
+#ifdef AARCH32_SP_OPTEE
+#define STM32MP_BL32_SIZE U(0)
+
+#define STM32MP_OPTEE_BASE STM32MP_SYSRAM_BASE
+
+#define STM32MP_OPTEE_SIZE (STM32MP_DTB_BASE - \
+ STM32MP_OPTEE_BASE)
+#else
#if STACK_PROTECTOR_ENABLED
#define STM32MP_BL32_SIZE U(0x00012000) /* 72 Ko for BL32 */
#else
#define STM32MP_BL32_SIZE U(0x00011000) /* 68 Ko for BL32 */
#endif
+#endif
#define STM32MP_BL32_BASE (STM32MP_SYSRAM_BASE + \
STM32MP_SYSRAM_SIZE - \
STM32MP_BL32_SIZE)
+#ifdef AARCH32_SP_OPTEE
+#if STACK_PROTECTOR_ENABLED
+#define STM32MP_BL2_SIZE U(0x00019000) /* 100 Ko for BL2 */
+#else
+#define STM32MP_BL2_SIZE U(0x00017000) /* 92 Ko for BL2 */
+#endif
+#else
#if STACK_PROTECTOR_ENABLED
#define STM32MP_BL2_SIZE U(0x00015000) /* 84 Ko for BL2 */
#else
#define STM32MP_BL2_SIZE U(0x00013000) /* 76 Ko for BL2 */
#endif
+#endif
#define STM32MP_BL2_BASE (STM32MP_BL32_BASE - \
STM32MP_BL2_SIZE)
tzc400_disable_filters();
+#ifdef AARCH32_SP_OPTEE
+ /*
+ * Region 1 set to cover all non-secure DRAM at 0xC000_0000. Apply the
+ * same configuration to all filters in the TZC.
+ */
+ region_base = ddr_base;
+ region_top = ddr_top - STM32MP_DDR_S_SIZE - STM32MP_DDR_SHMEM_SIZE;
+ tzc400_configure_region(STM32MP1_FILTER_BIT_ALL, 1,
+ region_base,
+ region_top,
+ TZC_REGION_S_NONE,
+ TZC_REGION_NSEC_ALL_ACCESS_RDWR);
+
+ /* Region 2 set to cover all secure DRAM. */
+ region_base = region_top + 1U;
+ region_top = ddr_top - STM32MP_DDR_SHMEM_SIZE;
+ tzc400_configure_region(STM32MP1_FILTER_BIT_ALL, 2,
+ region_base,
+ region_top,
+ TZC_REGION_S_RDWR,
+ 0);
+
+ /* Region 3 set to cover non-secure shared memory DRAM. */
+ region_base = region_top + 1U;
+ region_top = ddr_top;
+ tzc400_configure_region(STM32MP1_FILTER_BIT_ALL, 3,
+ region_base,
+ region_top,
+ TZC_REGION_S_NONE,
+ TZC_REGION_NSEC_ALL_ACCESS_RDWR);
+#else
/*
* Region 1 set to cover all DRAM at 0xC000_0000. Apply the
* same configuration to all filters in the TZC.
region_top,
TZC_REGION_S_NONE,
TZC_REGION_NSEC_ALL_ACCESS_RDWR);
+#endif
/* Raise an exception if a NS device tries to access secure memory */
tzc400_set_action(TZC_ACTION_ERR);
projects / project / bcm63xx / atf.git / commitdiff