target/linux/ramips/mt7621/base-files/etc/hotplug.d/ieee80211/10_fix_wifi_mac

   1 [ "$ACTION" == "add" ] || exit 0
   2
   3 PHYNBR=${DEVPATH##*/phy}
   4
   5 [ -n $PHYNBR ] || exit 0
   6
   7 . /lib/functions.sh
   8 . /lib/functions/system.sh
   9
  10 board=$(board_name)
  11
  12 case "$board" in
  13         beeline,smartbox-flash)
  14                 hw_mac_addr=$(macaddr_add $(mtd_get_mac_encrypted_arcadyan "board_data") 1)
  15                 [ "$PHYNBR" = "0" ] && echo -n "$hw_mac_addr" > /sys${DEVPATH}/macaddress
  16                 hw_mac_addr=$(macaddr_setbit   $hw_mac_addr 26)
  17                 hw_mac_addr=$(macaddr_unsetbit $hw_mac_addr 27)
  18                 hw_mac_addr=$(macaddr_unsetbit $hw_mac_addr 28)
  19                 [ "$PHYNBR" = "1" ] && macaddr_setbit_la $hw_mac_addr > /sys${DEVPATH}/macaddress
  20                 ;;
  21         cudy,x6)
  22                 hw_mac_addr="$(mtd_get_mac_binary factory 0x4)"
  23                 macaddr_add $hw_mac_addr "$PHYNBR" > /sys${DEVPATH}/macaddress
  24                 ;;
  25         dlink,dir-853-a3)
  26                 [ "$PHYNBR" = "0" ] && \
  27                         macaddr_setbit_la "$(mtd_get_mac_binary factory 0xe000)" \
  28                                 > /sys${DEVPATH}/macaddress
  29                 ;;
  30         dlink,dir-853-r1|\
  31         phicomm,k2p)
  32                 if [ "$PHYNBR" = "0" ]; then
  33                         base_mac=$(macaddr_add "$(mtd_get_mac_binary factory 0x4)" -1)
  34                         macaddr_setbit_la "$base_mac" > /sys${DEVPATH}/macaddress
  35                 fi
  36                 ;;
  37         glinet,gl-mt1300)
  38                 [ "$PHYNBR" = "1" ] && \
  39                         macaddr_add "$(mtd_get_mac_binary factory 0x4)" 1 > /sys${DEVPATH}/macaddress
  40                 ;;
  41         iptime,a3002mesh|\
  42         iptime,a3004t)
  43                 hw_mac_addr="$(mtd_get_mac_binary factory 0x4)"
  44                 [ "$PHYNBR" = "0" ] && \
  45                         macaddr_setbit_la "$(macaddr_add $hw_mac_addr 3)" > /sys${DEVPATH}/macaddress
  46                 [ "$PHYNBR" = "1" ] && echo -n "$hw_mac_addr" > /sys${DEVPATH}/macaddress
  47                 ;;
  48         iptime,ax2004m)
  49                 if [ "$PHYNBR" = "1" ]; then
  50                         hw_mac_addr="$(mtd_get_mac_binary factory 0x4)"
  51                         macaddr_setbit_la "$(macaddr_add $hw_mac_addr 3)" > /sys${DEVPATH}/macaddress
  52                 fi
  53                 ;;
  54         jcg,q20)
  55                 [ "$PHYNBR" = "1" ] && \
  56                         macaddr_setbit_la "$(mtd_get_mac_binary Factory 0x4)" > /sys${DEVPATH}/macaddress
  57                 ;;
  58         jcg,y2)
  59                 [ "$PHYNBR" = "1" ] && \
  60                         macaddr_setbit_la "$(mtd_get_mac_binary factory 0x4)" > /sys${DEVPATH}/macaddress
  61                 ;;
  62         linksys,e5600|\
  63         linksys,ea6350-v4|\
  64         linksys,ea7300-v1|\
  65         linksys,ea7300-v2|\
  66         linksys,ea7500-v2|\
  67         linksys,ea8100-v1|\
  68         linksys,ea8100-v2)
  69                 hw_mac_addr=$(mtd_get_mac_ascii devinfo hw_mac_addr)
  70                 [ "$PHYNBR" = "0" ] && macaddr_add $hw_mac_addr 1 > /sys${DEVPATH}/macaddress
  71                 [ "$PHYNBR" = "1" ] && macaddr_add $hw_mac_addr 2 > /sys${DEVPATH}/macaddress
  72                 ;;
  73         netgear,wax202)
  74                 hw_mac_addr=$(mtd_get_mac_ascii Config mac)
  75                 [ "$PHYNBR" = "0" ] && macaddr_add $hw_mac_addr 2 > /sys${DEVPATH}/macaddress
  76                 [ "$PHYNBR" = "1" ] && macaddr_add $hw_mac_addr 3 > /sys${DEVPATH}/macaddress
  77                 ;;
  78         mts,wg430223)
  79                 hw_mac_addr=$(macaddr_add $(mtd_get_mac_encrypted_arcadyan "board_data") 1)
  80                 [ "$PHYNBR" = "0" ] && echo -n "$hw_mac_addr" > /sys${DEVPATH}/macaddress
  81                 hw_mac_addr=$(macaddr_unsetbit $hw_mac_addr 26)
  82                 hw_mac_addr=$(macaddr_setbit   $hw_mac_addr 27)
  83                 hw_mac_addr=$(macaddr_unsetbit $hw_mac_addr 28)
  84                 [ "$PHYNBR" = "1" ] && macaddr_setbit_la $hw_mac_addr > /sys${DEVPATH}/macaddress
  85                 ;;
  86         oraybox,x3a)
  87                 if [ "$PHYNBR" = "1" ]; then
  88                         hw_mac_addr="$(mtd_get_mac_binary factory 0x4)"
  89                         macaddr_setbit_la "$(macaddr_add $hw_mac_addr 0x100000)" > /sys${DEVPATH}/macaddress
  90                 fi
  91                 ;;
  92         raisecom,msg1500-x-00)
  93                 [ "$PHYNBR" = "0" ] && \
  94                         macaddr_setbit_la "$(mtd_get_mac_ascii Config protest_lan_mac)" \
  95                                 > /sys${DEVPATH}/macaddress
  96                 ;;
  97         tenbay,t-mb5eu-v01)
  98                 hw_mac_addr="$(mtd_get_mac_binary factory 0x4)"
  99                 [ "$PHYNBR" = "1" ] &&  macaddr_add $hw_mac_addr "0x100000" > /sys${DEVPATH}/macaddress
 100                 ;;
 101         tplink,archer-ax23-v1)
 102                 hw_mac_addr="$(mtd_get_mac_binary config 0x8)"
 103                 # 2.4 GHz MAC is MAC in EEPROm while 5GHz is EEPROM_MAC -1
 104                 # However, mac80211 assigns consecutive addresses for each VAP
 105                 # Which leads to conflicting addresses. Set the LA bit for 5Ghz instead.
 106                 [ "$PHYNBR" = "1" ] &&  macaddr_setbit_la "$hw_mac_addr" > "/sys${DEVPATH}/macaddress"
 107                 ;;
 108         tplink,eap615-wall-v1)
 109                 hw_mac_addr="$(mtd_get_mac_binary product-info 0x8)"
 110                 macaddr_add "$hw_mac_addr" "$PHYNBR" > "/sys${DEVPATH}/macaddress"
 111                 ;;
 112         yuncore,ax820)
 113                 [ "$PHYNBR" = "1" ] && \
 114                         macaddr_setbit_la "$(mtd_get_mac_binary Factory 0xe000)" > /sys${DEVPATH}/macaddress
 115                 ;;
 116         zyxel,nwa50ax|\
 117         zyxel,nwa55axe)
 118                 hw_mac_addr="$(mtd_get_mac_binary mrd 0x1fff8)"
 119                 [ "$PHYNBR" = "0" ] && macaddr_add $hw_mac_addr 1 > /sys${DEVPATH}/macaddress
 120                 [ "$PHYNBR" = "1" ] && macaddr_add $hw_mac_addr 2 > /sys${DEVPATH}/macaddress
 121                 ;;
 122 esac