bmips: add support for NuCom R5010UNv2
authorDaniel González Cabanelas <dgcbueu@gmail.com>
Sun, 18 Jun 2023 19:34:59 +0000 (21:34 +0200)
committerÁlvaro Fernández Rojas <noltari@gmail.com>
Mon, 19 Jun 2023 18:42:44 +0000 (20:42 +0200)
The NuCom R5010UNv2 is a wifi fast ethernet router, 2.4 GHz single band
with two external antennas.

Hardware:
 - SoC: Broadcom BCM6328
 - CPU: single core BMIPS4350 V7.5 @ 320Mhz
 - RAM: 64 MB DDR2
 - Flash: 16 MB SPI NOR
 - Ethernet LAN: 4x 100Mbit
 - Wifi 2.4 GHz: Broadcom BCM43217 802.11bgn (onboard)
 - USB: 1x 2.0
 - Buttons: 2x
 - ADSL: yes, unsupported
 - LEDs: 7x
 - UART: yes

Installation via CFE web UI:
  1. Power off the router and press the RESET button
  2. Power on the router and wait 12 or more seconds
  3. Release the RESET button
  4. Browse to http://192.168.1.1 and upload the Openwrt cfe firmware
  5. Wait a few minutes for it to finish

Signed-off-by: Daniel González Cabanelas <dgcbueu@gmail.com>
(cherry picked from commit 6cb3328b4fd4939f3800d4be9d52744b753de1b6)

target/linux/bmips/bcm6328/base-files/etc/board.d/01_leds
target/linux/bmips/bcm6328/base-files/etc/board.d/02_network
target/linux/bmips/bcm6328/base-files/etc/uci-defaults/09_fix_crc
target/linux/bmips/dts/bcm6328-nucom-r5010unv2.dts [new file with mode: 0644]
target/linux/bmips/image/bcm6328.mk

index 5ece1f7ba1b0c35f958679aef12fac774cffea74..5e80eb34e736e4dba3eed2fe4166e32671dc3dfb 100644 (file)
@@ -6,6 +6,7 @@
 board_config_update
 
 case "$(board_name)" in
+nucom,r5010unv2 |\
 sercomm,ad1018)
        ucidef_set_led_usbport "usb" "USB" "green:usb" "usb1-port1" "usb2-port1"
        ;;
index 66f9282e48869f42173d7f9c1540a2cde3351cdd..bfedad9e45583525f94b2125a0d51060284ae99f 100644 (file)
@@ -6,7 +6,8 @@ board_config_update
 
 case "$(board_name)" in
 comtrend,ar-5381u |\
-comtrend,ar-5387un)
+comtrend,ar-5387un |\
+nucom,r5010unv2)
        ucidef_set_bridge_device switch
        ucidef_set_interface_lan "lan1 lan2 lan3 lan4"
        ;;
index 21f18b4b819502f3f75ea7c6ea6d2eb6619a6dc4..2056ea017ff99728f65577c85ac505382818cba4 100644 (file)
@@ -4,7 +4,8 @@
 
 case "$(board_name)" in
 comtrend,ar-5381u |\
-comtrend,ar-5387un)
+comtrend,ar-5387un |\
+nucom,r5010unv2)
        mtd fixtrx firmware
        ;;
 esac
diff --git a/target/linux/bmips/dts/bcm6328-nucom-r5010unv2.dts b/target/linux/bmips/dts/bcm6328-nucom-r5010unv2.dts
new file mode 100644 (file)
index 0000000..826b2a6
--- /dev/null
@@ -0,0 +1,216 @@
+// SPDX-License-Identifier: GPL-2.0-or-later
+
+#include "bcm6328.dtsi"
+
+/ {
+       model = "NuCom R5010UNv2";
+       compatible = "nucom,r5010unv2", "brcm,bcm6328";
+
+       aliases {
+               led-boot = &led_power_green;
+               led-failsafe = &led_power_red;
+               led-running = &led_power_green;
+               led-upgrade = &led_power_green;
+       };
+
+       keys {
+               compatible = "gpio-keys-polled";
+               poll-interval = <100>;
+
+               reset {
+                       label = "reset";
+                       gpios = <&gpio 23 GPIO_ACTIVE_LOW>;
+                       linux,code = <KEY_RESTART>;
+                       debounce-interval = <60>;
+               };
+
+               wps {
+                       label = "wps";
+                       gpios = <&gpio 24 GPIO_ACTIVE_LOW>;
+                       linux,code = <KEY_WPS_BUTTON>;
+                       debounce-interval = <60>;
+               };
+       };
+
+       bcm43217-sprom {
+               compatible = "brcm,bcma-sprom";
+
+               pci-bus = <1>;
+               pci-dev = <0>;
+
+               nvmem-cells = <&macaddr_cfe_6a0>;
+               nvmem-cell-names = "mac-address";
+               mac-address-increment = <1>;
+
+               brcm,sprom = "brcm/bcm43217-sprom.bin";
+       };
+};
+
+&ehci {
+       status = "okay";
+};
+
+&ethernet {
+       status = "okay";
+
+       nvmem-cells = <&macaddr_cfe_6a0>;
+       nvmem-cell-names = "mac-address";
+};
+
+&hsspi {
+       status = "okay";
+
+       flash@0 {
+               compatible = "jedec,spi-nor";
+               spi-max-frequency = <16666667>;
+               spi-tx-bus-width = <2>;
+               spi-rx-bus-width = <2>;
+               reg = <0>;
+
+               partitions {
+                       compatible = "fixed-partitions";
+                       #address-cells = <1>;
+                       #size-cells = <1>;
+
+                       cfe: partition@0 {
+                               label = "cfe";
+                               reg = <0x000000 0x010000>;
+                               read-only;
+                       };
+
+                       partition@10000 {
+                               compatible = "brcm,bcm963xx-imagetag";
+                               label = "firmware";
+                               reg = <0x010000 0xfe0000>;
+                       };
+
+                       partition@ff0000 {
+                               label = "nvram";
+                               reg = <0xff0000 0x010000>;
+                       };
+               };
+       };
+};
+
+&leds {
+       status = "okay";
+
+       pinctrl-names = "default";
+       pinctrl-0 = <&pinctrl_ephy0_act_led &pinctrl_ephy1_act_led
+                    &pinctrl_ephy2_act_led &pinctrl_ephy3_act_led
+                    &pinctrl_leds>;
+
+       led@1 {
+               reg = <1>;
+               active-low;
+               label = "green:internet";
+       };
+
+       led@2 {
+               reg = <2>;
+               active-low;
+               label = "red:internet";
+       };
+
+       led@3 {
+               reg = <3>;
+               active-low;
+               label = "green:dsl";
+       };
+
+       led_power_green: led@4 {
+               reg = <4>;
+               active-low;
+               label = "green:power";
+       };
+
+       led_power_red: led@5 {
+               reg = <5>;
+               active-low;
+               label = "red:power";
+               panic-indicator;
+       };
+
+       led@10 {
+               reg = <10>;
+               active-low;
+               label = "green:wps";
+       };
+
+       led@11 {
+               reg = <11>;
+               active-low;
+               label = "green:usb";
+       };
+};
+
+&ohci {
+       status = "okay";
+};
+
+&pcie {
+       status = "okay";
+};
+
+&pinctrl {
+       pinctrl_leds: leds {
+               function = "led";
+               pins = "gpio1", "gpio2", "gpio3",
+                      "gpio4", "gpio5", "gpio10",
+                      "gpio11";
+       };
+};
+
+&switch0 {
+       ports {
+               port@0 {
+                       reg = <0>;
+                       label = "lan1";
+
+                       phy-handle = <&phy1>;
+                       phy-mode = "mii";
+               };
+
+               port@1 {
+                       reg = <1>;
+                       label = "lan2";
+
+                       phy-handle = <&phy2>;
+                       phy-mode = "mii";
+               };
+
+               port@2 {
+                       reg = <2>;
+                       label = "lan3";
+
+                       phy-handle = <&phy3>;
+                       phy-mode = "mii";
+               };
+
+               port@3 {
+                       reg = <3>;
+                       label = "lan4";
+
+                       phy-handle = <&phy4>;
+                       phy-mode = "mii";
+               };
+       };
+};
+
+&uart0 {
+       status = "okay";
+};
+
+&usbh {
+       status = "okay";
+};
+
+&cfe {
+       compatible = "nvmem-cells";
+       #address-cells = <1>;
+       #size-cells = <1>;
+
+       macaddr_cfe_6a0: macaddr@6a0 {
+               reg = <0x6a0 0x6>;
+       };
+};
index ef74410f1e0d0f3a2d02479dfc87de76688e8bff..8023ef8fa1eef96312b453a2d7695bf6e7c12610 100644 (file)
@@ -26,6 +26,19 @@ define Device/comtrend_ar-5387un
 endef
 TARGET_DEVICES += comtrend_ar-5387un
 
+define Device/nucom_r5010unv2
+  $(Device/bcm63xx-cfe)
+  DEVICE_VENDOR := NuCom
+  DEVICE_MODEL := R5010UNv2
+  CHIP_ID := 6328
+  CFE_BOARD_ID := 96328ang
+  FLASH_MB := 16
+  DEVICE_PACKAGES += $(USB2_PACKAGES) \
+    $(B43_PACKAGES) broadcom-43217-sprom \
+    kmod-leds-bcm6328
+endef
+TARGET_DEVICES += nucom_r5010unv2
+
 define Device/sercomm_ad1018
   $(Device/sercomm-nand)
   DEVICE_VENDOR := Sercomm