openwrt/staging/jogo.git
4 years agokernel: Remove nvmem hack patch from 5.4
Hauke Mehrtens [Sun, 23 Feb 2020 15:46:01 +0000 (16:46 +0100)]
kernel: Remove nvmem hack patch from 5.4

The nvmem framework is now used in net/ethernet/eth.c and the nvmem
sysfs is split into a separate Kconfig option. More work would be needed
to adapt this patch for the broader use. The current patch compiles fine
on ath79, but it breaks the x86 target.

nvmem is also compiled into the kernel for most of our targets for
example ath79 anyway, so patching the kernel to remove it is now harder
and not the case on multiple targets anyway. Instead of making this work
on kernel 5.4 just remove this hack patch.

Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
4 years agokernel: Remove chash.ko from kmod-drm-amdgpu
Hauke Mehrtens [Sun, 23 Feb 2020 15:41:58 +0000 (16:41 +0100)]
kernel: Remove chash.ko from kmod-drm-amdgpu

This module was added with kernel 4.15, but is was removed again with
kernel version 5.3. OpenWrt does not support specifying a kernel version
range so just break it with kernel 4.14 and only support recent kernel
versions.

Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
4 years agokernel: Add snd-intel-nhlt.ko to kmod-sound-hda-intel
Hauke Mehrtens [Sun, 23 Feb 2020 15:41:16 +0000 (16:41 +0100)]
kernel: Add snd-intel-nhlt.ko to kmod-sound-hda-intel

With kernel 5.4 kmod-sound-hda-intel also needs snd-intel-nhlt.ko, but
this kernel module is only build on x86, make the OpenWrt kmod depend on
TARGET_x86.

Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
4 years agokernel: Make kmod-ixgbe depend on kmod-libphy
Hauke Mehrtens [Sun, 23 Feb 2020 15:39:30 +0000 (16:39 +0100)]
kernel: Make kmod-ixgbe depend on kmod-libphy

With kernel 5.4 kmod-ixgbe is depending on kmod-libphy, add this
missing dependency.

Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
4 years agokernel: Make LIB_ARC4 selectable
Hauke Mehrtens [Sun, 23 Feb 2020 15:28:21 +0000 (16:28 +0100)]
kernel: Make LIB_ARC4 selectable

This makes it possible to select CONFIG_CRYPTO_LIB_ARC4 directly. We
need this to be able to compile this into the kernel and make use of it
from mac80211 backports.

Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
4 years agonat46: Fix compile with kernel 5.4
Hauke Mehrtens [Wed, 5 Feb 2020 21:57:14 +0000 (22:57 +0100)]
nat46: Fix compile with kernel 5.4

nf_reset() was renamed to nf_reset_ct() in upstream Linux commit
895b5c9f206e ("netfilter: drop bridge nf reset from nf_reset)"

Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
4 years agokernel: Make kmod-rtc-pcf2123 depend on kmod-regmap-spi
Koen Vandeputte [Fri, 28 Feb 2020 14:09:27 +0000 (15:09 +0100)]
kernel: Make kmod-rtc-pcf2123 depend on kmod-regmap-spi

In kernel 5.4 kmod-rtc-pcf2123 depends on kmod-regmap-spi, add this missing
dependency.

Signed-off-by: Koen Vandeputte <koen.vandeputte@ncentric.com>
4 years agokernel: Make kmod-nft-core depend on kmod-nf-nat
Hauke Mehrtens [Wed, 5 Feb 2020 21:58:57 +0000 (22:58 +0100)]
kernel: Make kmod-nft-core depend on kmod-nf-nat

In kernel 5.4 kmod-nf-core depends on kmod-nf-nat, add this missing
dependency.

Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
4 years agokernel: Make kmod-fs-f2fs depend on kmod-nls-base
Hauke Mehrtens [Fri, 31 Jan 2020 12:48:24 +0000 (13:48 +0100)]
kernel: Make kmod-fs-f2fs depend on kmod-nls-base

Since kernel 5.4 kmod-fs-f2fs is depending on kmod-nls-base.

Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
4 years agokernel: Add of_touchscreen.ko to kmod-input-touchscreen-ads7846
Hauke Mehrtens [Fri, 31 Jan 2020 12:47:29 +0000 (13:47 +0100)]
kernel: Add of_touchscreen.ko to kmod-input-touchscreen-ads7846

kmod-input-touchscreen-ads7846 depends on of_touchscreen.ko since
kernel 5.4.

Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
4 years agokernel: Remove kmod-gigaset for kernel 5.4
Hauke Mehrtens [Fri, 31 Jan 2020 12:46:31 +0000 (13:46 +0100)]
kernel: Remove kmod-gigaset for kernel 5.4

gigaset was moved to staging in kernel 5.4, just deactivate it on
recent kernel versions instead of adapting it.

Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
4 years agokernel: Add roles.ko to kmod-usb-chipidea
Hauke Mehrtens [Fri, 31 Jan 2020 12:45:07 +0000 (13:45 +0100)]
kernel: Add roles.ko to kmod-usb-chipidea

kmod-usb-chipidea depends on roles.ko since kernel 5.4.

Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
4 years agokernel: Make kmod-gpio-pca953x depend on kmod-regmap-i2c
Hauke Mehrtens [Fri, 31 Jan 2020 12:40:10 +0000 (13:40 +0100)]
kernel: Make kmod-gpio-pca953x depend on kmod-regmap-i2c

In kernel 5.4 kmod-gpio-pca953x depends on kmod-regmap-i2c.

Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
4 years agokernel: module v4l2-common.ko was removed
Hauke Mehrtens [Fri, 31 Jan 2020 12:38:23 +0000 (13:38 +0100)]
kernel: module v4l2-common.ko was removed

The content of v4l2-common.ko was merged into videodev.ko and it was
removed in kernel 5.4.

Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
4 years agokernel: Adapt moved crodic.ko module
Hauke Mehrtens [Fri, 31 Jan 2020 12:36:15 +0000 (13:36 +0100)]
kernel: Adapt moved crodic.ko module

The module was moved in the kernel, adapt OpenWrt.

Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
4 years agokernel: Add crypto libraries to modules
Hauke Mehrtens [Fri, 31 Jan 2020 12:32:03 +0000 (13:32 +0100)]
kernel: Add crypto libraries to modules

In kernel 5.3 and 5.4 some crypto modules were split into two modules,
one implementing the crypto algorithm and the other integrating it
into the Linux crypto framework.

Adapt OpenWrt to support this split.

Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
4 years agokernel: Include xt_MASQUERADE for kernel 5.2 and later
Koen Vandeputte [Sun, 23 Feb 2020 14:30:37 +0000 (15:30 +0100)]
kernel: Include xt_MASQUERADE for kernel 5.2 and later

Instead of ip6t_MASQUERADE, include xt_MASQUERADE on kernel >= 5.2.

Signed-off-by: Koen Vandeputte <koen.vandeputte@ncentric.com>
4 years agokernel: mode_beet mode_transport mode_tunnel xfram modules
Koen Vandeputte [Sun, 23 Feb 2020 14:28:15 +0000 (15:28 +0100)]
kernel: mode_beet mode_transport mode_tunnel xfram modules

This adds the new xfrm4_mode_beet, xfrm4_mode_transport,
xfrm4_mode_tunnel and their IPv6 versions on kernel 5.4. These modules
were newly added in kernel 5.2.

Signed-off-by: Koen Vandeputte <koen.vandeputte@ncentric.com>
4 years agox86: Update configuration
Hauke Mehrtens [Sun, 23 Feb 2020 15:46:41 +0000 (16:46 +0100)]
x86: Update configuration

The configuration was refreshed and KERNEL_TESTING_PATCHVER was set to
make it easy to compile for kernel 5.4.

Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
4 years agox86: Refresh patches on kernel 5.4
Hauke Mehrtens [Sun, 23 Feb 2020 13:58:32 +0000 (14:58 +0100)]
x86: Refresh patches on kernel 5.4

Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
4 years agox86: copy kernel patches from 4.19 to 5.4
Hauke Mehrtens [Sun, 23 Feb 2020 13:55:25 +0000 (14:55 +0100)]
x86: copy kernel patches from 4.19 to 5.4

Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
4 years agokernel: add support for kernel 5.4
Koen Vandeputte [Mon, 25 Nov 2019 15:08:31 +0000 (16:08 +0100)]
kernel: add support for kernel 5.4

The following patches were removed because they are integrated in the upstream kernel 5.4:
 * backport-5.4/047-v4.21-mtd-keep-original-flags-for-every-struct-mtd_info.patch
 * backport-5.4/048-v4.21-mtd-improve-calculating-partition-boundaries-when-ch.patch
 * backport-5.4/080-v5.1-0001-bcma-keep-a-direct-pointer-to-the-struct-device.patch
 * backport-5.4/080-v5.1-0002-bcma-use-dev_-printing-functions.patch
 * backport-5.4/095-Allow-class-e-address-assignment-via-ifconfig-ioctl.patch
 * backport-5.4/101-arm-cns3xxx-use-actual-size-reads-for-PCIe.patch
 * backport-5.4/200-v5.2-usb-dwc2-Set-lpm-mode-parameters-depend-on-HW-configuration.patch
 * backport-5.4/210-arm64-sve-Disentangle-uapi-asm-ptrace.h-from-uapi-as.patch
 * backport-5.4/380-v5.3-net-sched-Introduce-act_ctinfo-action.patch
 * backport-5.4/450-v5.0-mtd-spinand-winbond-Add-support-for-W25N01GV.patch
 * backport-5.4/451-v5.0-mtd-spinand-Add-initial-support-for-Toshiba-TC58CVG2.patch
 * backport-5.4/452-v5.0-mtd-spinand-add-support-for-GigaDevice-GD5FxGQ4xA.patch
 * backport-5.4/455-v5.1-mtd-spinand-Add-support-for-all-Toshiba-Memory-produ.patch
 * backport-5.4/456-v5.1-mtd-spinand-Add-support-for-GigaDevice-GD5F1GQ4UExxG.patch
 * backport-5.4/460-v5.0-mtd-spi-nor-Add-support-for-mx25u12835f.patch
 * backport-5.4/460-v5.3-mtd-spinand-Define-macros-for-page-read-ops-with-thr.patch
 * backport-5.4/461-v5.3-mtd-spinand-Add-support-for-two-byte-device-IDs.patch
 * backport-5.4/462-v5.3-mtd-spinand-Add-support-for-GigaDevice-GD5F1GQ4UFxxG.patch
 * backport-5.4/463-v5.3-mtd-spinand-Add-initial-support-for-Paragon-PN26G0xA.patch
 * backport-5.4/700-v5.1-net-phylink-only-call-mac_config-during-resolve-when.patch
 * backport-5.4/701-v5.2-net-phylink-ensure-inband-AN-works-correctly.patch
 * backport-5.4/702-v4.20-net-ethernet-Add-helper-for-MACs-which-support-asym-.patch
 * backport-5.4/703-v4.20-net-ethernet-Add-helper-for-set_pauseparam-for-Asym-.patch
 * backport-5.4/704-v4.20-net-phy-Stop-with-excessive-soft-reset.patch
 * backport-5.4/705-v5.1-net-phy-provide-full-set-of-accessor-functions-to-MM.patch
 * backport-5.4/706-v5.1-net-phy-add-register-modifying-helpers-returning-1-o.patch
 * backport-5.4/707-v5.1-net-phy-add-genphy_c45_check_and_restart_aneg.patch
 * backport-5.4/708-v5.3-net-phylink-remove-netdev-from-phylink-mii-ioctl-emu.patch
 * backport-5.4/709-v5.3-net-phylink-support-for-link-gpio-interrupt.patch
 * backport-5.4/710-v5.3-net-phy-allow-Clause-45-access-via-mii-ioctl.patch
 * backport-5.4/711-v5.3-net-sfp-add-mandatory-attach-detach-methods-for-sfp-.patch
 * backport-5.4/712-v5.3-net-sfp-remove-sfp-bus-use-of-netdevs.patch
 * backport-5.4/713-v5.2-net-phylink-avoid-reducing-support-mask.patch
 * backport-5.4/714-v5.3-net-sfp-Stop-SFP-polling-and-interrupt-handling-duri.patch
 * backport-5.4/715-v5.3-net-phylink-don-t-start-and-stop-SGMII-PHYs-in-SFP-m.patch
 * backport-5.4/740-v5.5-net-phy-avoid-matching-all-ones-clause-45-PHY-IDs.patch
 * backport-5.4/741-v5.5-net-phylink-fix-link-mode-modification-in-PHY-mode.patch
 * pending-5.4/103-MIPS-perf-ath79-Fix-perfcount-IRQ-assignment.patch
 * pending-5.4/131-spi-use-gpio_set_value_cansleep-for-setting-chipsele.patch
 * pending-5.4/132-spi-spi-gpio-fix-crash-when-num-chipselects-is-0.patch
 * pending-5.4/220-optimize_inlining.patch
 * pending-5.4/341-MIPS-mm-remove-no-op-dma_map_ops-where-possible.patch
 * pending-5.4/475-mtd-spi-nor-Add-Winbond-w25q128jv-support.patch
 * pending-5.4/477-mtd-add-spi-nor-add-mx25u3235f.patch
 * pending-5.4/479-mtd-spi-nor-add-eon-en25qh64.patch

Some bigger changes were done to this feature and we did not port this patch yet:
 * hack-5.4/207-disable-modorder.patch

This depends on BOOTMEM which was removed from the kernel, this needs some bigger changes:
 * hack-5.4/930-crashlog.patch

A different version of the FPU disable patch was merged upstream, OpenWrt needs some adaptations.
 * pending-5.4/304-mips_disable_fpu.patch

- no crashlog support yet as a required file got deleted upstream
- Removed patch below, which is now seen as a recursive dependency [1]
- Removed patch below due to build error [2]
- fix still required to avoid identical function def [3]
- Fixes included from Blocktrron
- Fixes included from Chunkeey
- Fix included from nbd regarding "dst leak in Flow Offload"

[1] target/linux/generic/hack-5.4/260-crypto_test_dependencies.patch
[2] target/linux/generic/hack-5.4/207-disable-modorder.patch
[3] target/linux/generic/pending-5.4/613-netfilter_optional_tcp_window_check.patch

Signed-off-by: Koen Vandeputte <koen.vandeputte@ncentric.com>
Signed-off-by: David Bauer <mail@david-bauer.net>
Signed-off-by: Christian Lamparter <chunkeey@gmail.com>
Signed-off-by: Ansuel Smith <ansuelsmth@gmail.com>
Signed-off-by: Robert Marko <robimarko@gmail.com>
Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
4 years agokernel: copy kernel 4.19 code to 5.4
Hauke Mehrtens [Sun, 23 Feb 2020 12:20:11 +0000 (13:20 +0100)]
kernel: copy kernel 4.19 code to 5.4

No changes were done to the patches while coping them. Currently they do
not apply on top of kernel 5.4.

Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
4 years agolibubox: update to latest Git HEAD
Jo-Philipp Wich [Thu, 27 Feb 2020 21:03:18 +0000 (22:03 +0100)]
libubox: update to latest Git HEAD

7da6643 tests: blobmsg: add test case
75e300a blobmsg: fix wrong payload len passed from blobmsg_check_array

Fixes: FS#2833
Signed-off-by: Jo-Philipp Wich <jo@mein.io>
4 years agoath79: also reduce spi-max-frequency for buffalo_wzr-hp-ag300h
Adrian Schmutzler [Thu, 27 Feb 2020 13:49:08 +0000 (14:49 +0100)]
ath79: also reduce spi-max-frequency for buffalo_wzr-hp-ag300h

In accordance to ebc090e420d1 ("ath79: reduce spi-max-frequency to 50 MHz")
this also reduces the spi-max-frequency to 50 MHz for the last remaining
device with higher frequency in ath79. This will save us from having a
single special case that will require adjustment when the spi driver for
this device is changed in the future.

Signed-off-by: Adrian Schmutzler <freifunk@adrianschmutzler.de>
Acked-by: Chuanhong Guo <gch981213@gmail.com>
4 years agokirkwood: apply minor DTS style improvements
Adrian Schmutzler [Thu, 27 Feb 2020 12:05:51 +0000 (13:05 +0100)]
kirkwood: apply minor DTS style improvements

This applies some minor DTS style improvements to the files kept
in OpenWrt at the moment:

- harmonize/improve LED/pinmux node names
- harmonize empty lines between nodes
- change "ok" to "okay"
- some other minor formatting adjustments

Since changes are only cosmetical, they are only applied to the
"newer" DTS files for kernel 4.19.

Signed-off-by: Adrian Schmutzler <freifunk@adrianschmutzler.de>
4 years agokirkwood: convert DTS patches into plain DTS files
Sungbo Eo [Mon, 24 Feb 2020 12:06:04 +0000 (21:06 +0900)]
kirkwood: convert DTS patches into plain DTS files

Move DTS files newly created by patch files to files directory. This will make
these files much more maintainable.

Patching the kernel Makefile is unnecessary, as the DTS files specified in
DEVICE_DTS will be compiled by OpenWrt buildroot anyway.

Signed-off-by: Sungbo Eo <mans0n@gorani.run>
Acked-by: Adrian Schmutzler <freifunk@adrianschmutzler.de>
4 years agoath79: reduce spi-max-frequency to 50 MHz
Adrian Schmutzler [Thu, 27 Feb 2020 10:55:36 +0000 (11:55 +0100)]
ath79: reduce spi-max-frequency to 50 MHz

The introduction of ebf0d8dadeca ("ath79: add new ar934x spi driver")
made the SPI memory unusable on devices with very high spi-max-frequency
(104 MHz).

Here's how the actual clock is calculated: (AHB_CLK/((CLOCK_DIVIDER+1)*2))
where AHB_CLK is a fixed clock (e.g. 200MHz on AR9331) and CLOCK_DIVIDER
is the parameter we can set. Highest clock according to this formula is
AHB_CLK/2 (100MHz, but that didn't work in device tests).
The next possible value is AHB_CLK/4 (50MHz). Speeds between 50 MHz and
100 MHz will be rounded down, so using values higher than 50 MHz does
not provide any benefit.

Consequently, this patch reduces spi-max-frequency for all devices with
values higher than 50 MHz to 50 MHz (effectively, this only affects
devices with 104 MHz before this patch).

Tested on GL.inet GL-AR150:
Boot fails with 104 MHz but is successful with both 50 MHz and 80 MHz
(fast-read), where the latter two yield identical read speeds.

Fixes: ebf0d8dadeca ("ath79: add new ar934x spi driver")
Signed-off-by: Adrian Schmutzler <freifunk@adrianschmutzler.de>
4 years agoath79: fix spi-max-frequency for wAP G-5HacT2HnD
Roger Pueyo Centelles [Mon, 24 Feb 2020 20:07:59 +0000 (21:07 +0100)]
ath79: fix spi-max-frequency for wAP G-5HacT2HnD

The introduction of ebf0d8dade (ath79: add new ar934x spi driver)
made the SPI memory unusable. Reducing the spi-max-frequency to
a smaller value makes it work again.

Tested on two MikroTik RouterBOARD wAP G-5HacT2HnD devices.

Signed-off-by: Roger Pueyo Centelles <roger.pueyo@guifi.net>
4 years agobase-files: add all buildinfo with INCLUDE_CONFIG
Xu Wang [Sat, 8 Feb 2020 23:04:11 +0000 (23:04 +0000)]
base-files: add all buildinfo with INCLUDE_CONFIG

CONFIG_INCLUDE_CONFIG option is helpful for being able to rebuild the
exact same firmware as you see on a live OpenWRT instance, but it's
crucially missing feeds information, so we can't rebuild the exact same
package versions. This commit fixes this by adding the remaining feeds
(and version) buildinfo files to the image.

Signed-off-by: Xu Wang <xwang1498@gmx.com>
4 years agoppp: backport security fixes
Petr Štetiar [Thu, 20 Feb 2020 08:03:54 +0000 (09:03 +0100)]
ppp: backport security fixes

8d45443bb5c9 pppd: Ignore received EAP messages when not doing EAP
8d7970b8f3db pppd: Fix bounds check in EAP code
858976b1fc31 radius: Prevent buffer overflow in rc_mksid()

Signed-off-by: Petr Štetiar <ynezz@true.cz>
Fixes: CVE-2020-8597
Signed-off-by: Jo-Philipp Wich <jo@mein.io>
4 years agoRevert "ppp: backport security fixes"
Jo-Philipp Wich [Wed, 26 Feb 2020 15:36:16 +0000 (16:36 +0100)]
Revert "ppp: backport security fixes"

This reverts commit 215598fd03899c19a9cd26266221269dd5ec8cee since it
didn't contain a reference to the CVE it addresses. The next commit
will re-add the commit including a CVE reference in its commit message.

Signed-off-by: Jo-Philipp Wich <jo@mein.io>
4 years agoath79: add support for MikroTik RouterBOARD 922UAGS-5HPacD
Roger Pueyo Centelles [Sun, 26 Jan 2020 16:56:05 +0000 (17:56 +0100)]
ath79: add support for MikroTik RouterBOARD 922UAGS-5HPacD

This patch ports support for the MikroTik RouterBOARD 922UAGS-5HPacD
with a built-in 802.11ac High-Power radio (31dBm), which was already
available in the ar71xx target.

See https://mikrotik.com/product/RB922UAGS-5HPacD for more info.

Specifications:
- SoC: Qualcomm Atheros QCA9558 (720 MHz)
- RAM: 128 MB
- Storage: 128 MB NAND
- Wireless: external QCA9882 802.11a/ac 2x2:2
- Ethernet: 1x 1000/100/10 Mbps, integrated, via AR8031 PHY, passive PoE-in 24V
- SFP: 1x host
- USB: 1x 2.0 type A
- PCIe: 1x Mini slot (also contains USB 2.0 for 3G/LTE modems)
- SIM slot: 1x mini-SIM

Working:
- Board/system detection
- SPI and NAND storage
- PCIe
- USB type A host
- Wireless
- Ethernet
- LEDs (user, phy0)
- Reset button
- Sysupgrade to/from ar71xx

Not supported:
- RSSI LEDs
- SFP cage

Installation methods:
- Sysupgrade from ar71xx (it is advisable to use the -n option to
wipe any previous settings), or
- Boot the initramfs image via TFTP and then flash the sysupgrade
image using "sysupgrade -n"

Signed-off-by: Roger Pueyo Centelles <roger.pueyo@guifi.net>
4 years agorbextract: support devices with plain RLE caldata
Roger Pueyo Centelles [Wed, 29 Jan 2020 10:27:03 +0000 (11:27 +0100)]
rbextract: support devices with plain RLE caldata

Old MikroTik devices have the RLE-encoded radio calibration data
directly stored in the art (hard_config) partition, without LZO
compression nor any preceding ERD magic bytes. This commit adds
a fallback for these devices.

Tested on the ath79 target with a MikroTik SXT 5nD r2 (SXT Lite5),
only locally --not yet merged upstream--.

Signed-off-by: Roger Pueyo Centelles <roger.pueyo@guifi.net>
4 years agokernel: x86_64: drop CALGARY properly
Kevin Darbyshire-Bryant [Tue, 25 Feb 2020 16:38:35 +0000 (16:38 +0000)]
kernel: x86_64: drop CALGARY properly

Use correct config syntax of 'is not set' instead of just commenting the
line

Signed-off-by: Kevin Darbyshire-Bryant <ldir@darbyshire-bryant.me.uk>
4 years agomediatek: add latest fixes provided by MTK
John Crispin [Tue, 25 Feb 2020 16:15:07 +0000 (17:15 +0100)]
mediatek: add latest fixes provided by MTK

Signed-off-by: John Crispin <john@phrozen.org>
4 years agokernel: x86_64: drop CALGARY IOMMU
Kevin Darbyshire-Bryant [Mon, 24 Feb 2020 13:53:57 +0000 (13:53 +0000)]
kernel: x86_64: drop CALGARY IOMMU

The calgary IOMMU was only used on high-end IBM systems in the early
x86_64 age.  This is an unlikely OpenWrt target and in fact upstream
are looking to drop the driver entirely with the bonus that we no
longer see:

[ 0.000000] Calgary: detecting Calgary via BIOS EBDA area
[ 0.000000] Calgary: Unable to locate Rio Grande table in EBDA - bailing!

Signed-off-by: Kevin Darbyshire-Bryant <ldir@darbyshire-bryant.me.uk>
4 years agomac80211: enhance wifi reload
John Crispin [Tue, 25 Feb 2020 16:03:44 +0000 (17:03 +0100)]
mac80211: enhance wifi reload

If the reconf call fails force a full restart of the radio.

Signed-off-by: John Crispin <john@phrozen.org>
4 years agohostapd: enhance wifi reload
John Crispin [Tue, 25 Feb 2020 16:01:55 +0000 (17:01 +0100)]
hostapd: enhance wifi reload

Add a radio_config_id property. If the radio config changes return an error
upon receiving the reconf call.

Signed-off-by: John Crispin <john@phrozen.org>
4 years agomt76: update to the latest version
Felix Fietkau [Tue, 25 Feb 2020 12:33:46 +0000 (13:33 +0100)]
mt76: update to the latest version

0a53dcda5203 mt76: mt7603: add upper limit for dynamic sensitivity minimum receive power
46e63c05f7d1 mt76: mt7603: enable dynamic sensitivity adjustment by default
81476f11b68c mt76: mt7615: fix antenna mask initialization in DBDC mode

Signed-off-by: Felix Fietkau <nbd@nbd.name>
4 years agobase-files: diag: restore default trigger for 'boot' LED
Piotr Dymacz [Fri, 31 Jan 2020 14:22:54 +0000 (15:22 +0100)]
base-files: diag: restore default trigger for 'boot' LED

For devices without a dedicated 'diag' LED, we use sometimes one of
other LEDs for indicating at least 'boot', 'failsafe' and 'upgrade'
stages. In some cases, at the same time these LEDs have defined default
triggers in DTS using 'linux,default-trigger' property. Current 'diag'
setup removes the trigger and turns off 'boot' LED after bootup.

One of the examples of such device is TP-Link TL-WR841N v14 (ramips)
which uses 'wlan' LED with defined 'linux,default-trigger' for 'diag':

aliases {
        led-boot = &led_wlan;
        led-failsafe = &led_wlan;
        led-upgrade = &led_wlan;
};

[...]

led_wlan: wlan {
        label = "tl-wr841n-v14:green:wlan";
        gpios = <&gpio1 9 GPIO_ACTIVE_LOW>;
        linux,default-trigger = "phy0tpt";
};

This patch extends 'diag.sh' and 'leds.sh' scripts to make sure default
trigger defined in DTS is restored for 'diag' LED which isn't used for
indicating 'running' stage.

Acked-by: Adrian Schmutzler <freifunk@adrianschmutzler.de>
Signed-off-by: Piotr Dymacz <pepe2k@gmail.com>
4 years agohostapd: start hostapd/wpa_supplicant for all wiphy devices
Piotr Dymacz [Mon, 20 Jan 2020 18:35:01 +0000 (19:35 +0100)]
hostapd: start hostapd/wpa_supplicant for all wiphy devices

c888e17e06 ("hostapd: manage instances via procd instead of pidfile")
added procd support for managing hostapd and wpa_supplicant daemons
but at the same time limited wiphy names to 'phy*'.

This brings back initial behaviour (introduced in 60fb4c92b6 ("hostapd:
add ubus reload") and makes procd manage daemons for any wiphy device
found in '/sys/class/ieee80211'.

CC: Felix Fietkau <nbd@nbd.name>
CC: Daniel Golle <daniel@makrotopia.org>
Signed-off-by: Piotr Dymacz <pepe2k@gmail.com>
4 years agoumbim: move package to 'WWAN' submenu
Piotr Dymacz [Mon, 25 Nov 2019 20:00:30 +0000 (21:00 +0100)]
umbim: move package to 'WWAN' submenu

'uqmi' was moved to 'WWAN' submenu in 9abdeee0b7.
Let's be consistent and do the same with 'umbim'.

Signed-off-by: Piotr Dymacz <pepe2k@gmail.com>
4 years agombedtls: use correct SPDX License Identifier and add License file
Josef Schlehofer [Sat, 22 Feb 2020 22:03:37 +0000 (23:03 +0100)]
mbedtls: use correct SPDX License Identifier and add License file

License "GPL-2.0+" is deprecated License Identifier according to
SPDX License list [1]. The correct one is GPL-2.0-or-later.
While at it, also add the License file.

[1] https://spdx.org/licenses/

Signed-off-by: Josef Schlehofer <pepe.schlehofer@gmail.com>
4 years agombedtls: update to version 2.16.5
Josef Schlehofer [Sat, 22 Feb 2020 22:03:36 +0000 (23:03 +0100)]
mbedtls: update to version 2.16.5

Changelog:
https://tls.mbed.org/tech-updates/releases/mbedtls-2.16.5-and-2.7.14-released

Security advisory:
https://tls.mbed.org/tech-updates/security-advisories/mbedtls-security-advisory-2020-02

Signed-off-by: Josef Schlehofer <pepe.schlehofer@gmail.com>
4 years agostrace: update to version 5.5
Josef Schlehofer [Sun, 23 Feb 2020 07:48:39 +0000 (08:48 +0100)]
strace: update to version 5.5

Changelog:
https://strace.io/files/5.5/

Signed-off-by: Josef Schlehofer <pepe.schlehofer@gmail.com>
4 years agokernel: Sort generic configuration
Hauke Mehrtens [Sun, 23 Feb 2020 12:20:11 +0000 (13:20 +0100)]
kernel: Sort generic configuration

This was done by executing these commands:

$ ./scripts/kconfig.pl '+' target/linux/generic/config-4.19 /dev/null > target/linux/generic/config-4.19-new
$ mv target/linux/generic/config-4.14-new target/linux/generic/config-4.14

$ ./scripts/kconfig.pl '+' target/linux/generic/config-4.14 /dev/null > target/linux/generic/config-4.14-new
$ mv target/linux/generic/config-4.19-new target/linux/generic/config-4.19

Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
4 years agolinux-atm: Fix compile warning
Hauke Mehrtens [Sat, 22 Feb 2020 19:39:47 +0000 (20:39 +0100)]
linux-atm: Fix compile warning

The function trace_on_exit() is given to atexit() as a parameter, but
atexit() only takes a function pointer to a function with a void
parameter.

This problem was introduced when the on_exit() function was incompletely
replaced by atexit().

Fixes: ba6c8bd6142f ("linux-atm: add portability fixes")
Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
4 years agoath10k-ct: Use ath10k-ct version 5.4
Hauke Mehrtens [Sat, 9 Nov 2019 16:06:06 +0000 (17:06 +0100)]
ath10k-ct: Use ath10k-ct version 5.4

This makes ath10k-ct use the version based on kernel 5.4 by default.

Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
4 years agoath10k-ct: Update to version 2020-02-18
Hauke Mehrtens [Sat, 22 Feb 2020 18:12:34 +0000 (19:12 +0100)]
ath10k-ct: Update to version 2020-02-18

This adds AP VLAN support.

Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
4 years agomac80211: Allow IBSS mode and different beacon intervals
Hauke Mehrtens [Sat, 9 Nov 2019 16:06:05 +0000 (17:06 +0100)]
mac80211: Allow IBSS mode and different beacon intervals

ath10k-ct supports the combination to select IBSS (ADHOC) mode and
different beacon intervals together. mac80211 does not like this
combination, but Ben says this is ok, so remove this check.

Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
4 years agortl8812au-ct: Update to version 2020-01-12
Hauke Mehrtens [Wed, 5 Feb 2020 21:49:27 +0000 (22:49 +0100)]
rtl8812au-ct: Update to version 2020-01-12

This fixes compile problems with kernel 5.4

Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
4 years agoath79: add missing reset-gpios for NanoStation Loco M (XW)
Roger Pueyo Centelles [Mon, 24 Feb 2020 17:21:49 +0000 (18:21 +0100)]
ath79: add missing reset-gpios for NanoStation Loco M (XW)

When porting support from ar71xx to ath79, the reset-gpios option was
missed. Due to a hardware bug, this would eventually leave the devices
with RX-deaf Ethernet PHY.

Signed-off-by: Roger Pueyo Centelles <roger.pueyo@guifi.net>
4 years agokernel: bump 4.19 to 4.19.106
Koen Vandeputte [Mon, 24 Feb 2020 15:11:02 +0000 (16:11 +0100)]
kernel: bump 4.19 to 4.19.106

Refreshed all patches.

Remove upstreamed:
- 950-0786-leds-pca963x-Fix-open-drain-initialization.patch

Compile-tested on: cns3xxx
Runtime-tested on: cns3xxx

Signed-off-by: Koen Vandeputte <koen.vandeputte@ncentric.com>
4 years agokirkwood: remove kmod-i2c-mv64xxx from DEVICE_PACKAGES
Sungbo Eo [Sun, 23 Feb 2020 15:14:22 +0000 (00:14 +0900)]
kirkwood: remove kmod-i2c-mv64xxx from DEVICE_PACKAGES

Commit 9a1f441ac81c ("kirkwood: enable SoC drivers in the kernel config")
enabled I2C_MV64XXX in the kernel config, and the subsequent commit 0d5ba94088ef
("orion: enable SoC drivers in the kernel config") removed kmod-i2c-mv64xxx
package entirely. As the feature is now kernel built-in and the package does not
exist anymore, we can safely remove kmod-i2c-mv64xxx from DEVICE_PACKAGES.

Signed-off-by: Sungbo Eo <mans0n@gorani.run>
4 years agokernel: bump 4.19 to 4.19.105
Koen Vandeputte [Fri, 21 Feb 2020 14:09:00 +0000 (15:09 +0100)]
kernel: bump 4.19 to 4.19.105

Refreshed all patches.

Fixes:
- CVE-2013-1798
- CVE-2019-3016

Compile-tested on: cns3xxx
Runtime-tested on: cns3xxx

Signed-off-by: Koen Vandeputte <koen.vandeputte@ncentric.com>
4 years agokernel: bump 4.14 to 4.14.171
Koen Vandeputte [Fri, 21 Feb 2020 14:04:52 +0000 (15:04 +0100)]
kernel: bump 4.14 to 4.14.171

Refreshed all patches.

Fixes:
- CVE-2013-1798

Compile-tested on: cns3xxx
Runtime-tested on: cns3xxx

Signed-off-by: Koen Vandeputte <koen.vandeputte@ncentric.com>
4 years agokirkwood: tidy up hwmon_fancontrol
Sungbo Eo [Sun, 23 Feb 2020 15:17:16 +0000 (00:17 +0900)]
kirkwood: tidy up hwmon_fancontrol

Add indent and sort board_name alphabetically.

Sourcing /lib/functions.sh is already handled by /etc/rc.common. Drop the line.

Signed-off-by: Sungbo Eo <mans0n@gorani.run>
4 years agourngd: avoid PKG_NAME in define lines
Sungbo Eo [Sun, 23 Feb 2020 12:38:24 +0000 (21:38 +0900)]
urngd: avoid PKG_NAME in define lines

> Avoid reuse of PKG_NAME in call, define and eval lines for consistency and
> readability. Write the full name instead.

Ref: https://openwrt.org/docs/guide-developer/packages

Signed-off-by: Sungbo Eo <mans0n@gorani.run>
4 years agourandom-seed: avoid PKG_NAME in define lines
Sungbo Eo [Sun, 23 Feb 2020 12:37:36 +0000 (21:37 +0900)]
urandom-seed: avoid PKG_NAME in define lines

> Avoid reuse of PKG_NAME in call, define and eval lines for consistency and
> readability. Write the full name instead.

Ref: https://openwrt.org/docs/guide-developer/packages

Signed-off-by: Sungbo Eo <mans0n@gorani.run>
4 years agokirkwood: add kmod-hwmon-core to DEVICE_PACKAGES
Sungbo Eo [Sun, 23 Feb 2020 15:14:22 +0000 (00:14 +0900)]
kirkwood: add kmod-hwmon-core to DEVICE_PACKAGES

kmod-hwmon-lm* will not get into images unless kmod-hwmon-core is added to
DEVICE_PACKAGES as well.

Signed-off-by: Sungbo Eo <mans0n@gorani.run>
[only address kmod-hwmon-core in this commit]
Signed-off-by: Adrian Schmutzler <freifunk@adrianschmutzler.de>
4 years agokirkwood: tidy up image Makefile
Sungbo Eo [Sun, 23 Feb 2020 15:16:16 +0000 (00:16 +0900)]
kirkwood: tidy up image Makefile

- use k in SIZE variables
- break long lines

Signed-off-by: Sungbo Eo <mans0n@gorani.run>
4 years agokirkwood: fix device node name of Iomega ix2-200
Sungbo Eo [Sun, 23 Feb 2020 15:12:23 +0000 (00:12 +0900)]
kirkwood: fix device node name of Iomega ix2-200

The current device node name of ix2-200 is "iom_ix2_200", which results
in a SUPPORTED_DEVICES string "iom,ix2,200" that does not match the
compatible in DTS and the board name used in board.d.

Fix this by replacing the second underscore with a dash, following
vendor_model scheme.

Fixes: 27b2f0fc0fc5 ("kirkwood: add support for Iomega Storcenter ix2-200")
Signed-off-by: Sungbo Eo <mans0n@gorani.run>
[commit title/message rephrase]
Signed-off-by: Adrian Schmutzler <freifunk@adrianschmutzler.de>
4 years agoath79: fix TP-Link TL-WA901ND v2 PHY stuck in reset
David Bauer [Sun, 23 Feb 2020 11:50:30 +0000 (12:50 +0100)]
ath79: fix TP-Link TL-WA901ND v2 PHY stuck in reset

Some newer bootloaders for the TP-Link TL-WA901ND put the ethernet PHY
in reset before loading the kernel, thus the LAN interface is not
working in OpenWrt.

Clear the reset to restore ethernet functionality.

Signed-off-by: David Bauer <mail@david-bauer.net>
4 years agox86: avoid underscore in package name
Sungbo Eo [Sun, 23 Feb 2020 04:05:35 +0000 (13:05 +0900)]
x86: avoid underscore in package name

As 07e1d88d7beb ("kernel: avoid underscore in *6lowpan package names") shows,
underscores might cause build failures. Replace underscore with dash.

Signed-off-by: Sungbo Eo <mans0n@gorani.run>
4 years agoltq-vdsl-mei: avoid underscore in package name
Sungbo Eo [Sun, 23 Feb 2020 04:05:27 +0000 (13:05 +0900)]
ltq-vdsl-mei: avoid underscore in package name

As 07e1d88d7beb ("kernel: avoid underscore in *6lowpan package names") shows,
underscores might cause build failures. Replace underscore with dash.

Signed-off-by: Sungbo Eo <mans0n@gorani.run>
4 years agoramips: move includes to DTSI for mt7628an_tplink_8m*
Adrian Schmutzler [Sat, 22 Feb 2020 18:33:41 +0000 (19:33 +0100)]
ramips: move includes to DTSI for mt7628an_tplink_8m*

All devices inherited from mt7628an_tplink_8m.dtsi and
mt7628an_tplink_8m-split-uboot.dtsi contain the same additional
includes in the DTS files.

Move them to the DTSI files instead.

Signed-off-by: Adrian Schmutzler <freifunk@adrianschmutzler.de>
4 years agoramips: move compatible for Ubiquiti Edgerouter X to DTS file
Adrian Schmutzler [Sat, 22 Feb 2020 18:28:17 +0000 (19:28 +0100)]
ramips: move compatible for Ubiquiti Edgerouter X to DTS file

So far, the compatible for the Ubiquiti Edgerouter X has been
defined in the DTSI file and inherited for the edgerouterx.dts,
but overwritten for the edgerouterx-sfp.dts. In contrast, the
model was stored in the DTS file in both cases.

To resolve this somewhat confusing situation, move the compatible
with the device name for edgerouterx to the DTS file as well.

Signed-off-by: Adrian Schmutzler <freifunk@adrianschmutzler.de>
4 years agoramips: remove redundant includes in DTS files
Adrian Schmutzler [Sat, 22 Feb 2020 18:26:17 +0000 (19:26 +0100)]
ramips: remove redundant includes in DTS files

Many DTS files contain the same includes again that are already
present in the DTSI files they are derived from.

Remove those redundant includes in the DTS files. For vocore, the
include is moved to the parent DTSI file.

Signed-off-by: Adrian Schmutzler <freifunk@adrianschmutzler.de>
4 years agoath79: remove redundant includes in DTS files
Adrian Schmutzler [Sat, 22 Feb 2020 18:16:05 +0000 (19:16 +0100)]
ath79: remove redundant includes in DTS files

Many DTS files contain the same includes again that are already
present in the DTSI files they are derived from.

Remove those redundant includes in the DTS files.

Signed-off-by: Adrian Schmutzler <freifunk@adrianschmutzler.de>
4 years agopackages/boot: bump arm-trusted-firmware-mvebu version
Scott Roberts [Wed, 22 Jan 2020 22:42:46 +0000 (15:42 -0700)]
packages/boot: bump arm-trusted-firmware-mvebu version

The current version of ATF does not support power off for SGMII
COMPHY.  Update to latest ATF to resolve this issue.

Signed-off-by: Scott Roberts <ttocsr@gmail.com>
4 years agomac80211: backport fix TID field in monitor mode transmit
Fredrik Olofsson [Wed, 29 Jan 2020 14:39:53 +0000 (15:39 +0100)]
mac80211: backport fix TID field in monitor mode transmit

Backport 753ffad3d6243303994227854d951ff5c70fa9e0 as merged in Linux v5.5-rc3.

Signed-off-by: Fredrik Olofsson <fredrik.olofsson@anyfinetworks.com>
4 years agokernel: fix xt_connmark.h
Martin Schiller [Wed, 5 Feb 2020 07:12:54 +0000 (08:12 +0100)]
kernel: fix xt_connmark.h

Commit a1cfe0dcbb24 (kernel: connmark set-dscpmark follow upstreamimg
attempt") broke the usage of xt_connmark.h in user-space (e.g.
strongswan), because the BIT() macro is unknown there.

Fixes: a1cfe0dcbb24 (kernel: connmark set-dscpmark follow upstreamimg attempt")
Signed-off-by: Martin Schiller <ms@dev.tdt.de>
4 years agotoolchain/binutils: Add binutils 2.34
Daniel Engberg [Mon, 3 Feb 2020 15:30:06 +0000 (15:30 +0000)]
toolchain/binutils: Add binutils 2.34

Refresh patches
Drop 300-012_check_ldrunpath_length.patch

Signed-off-by: Daniel Engberg <daniel.engberg.lists@pyret.net>
4 years agopackage/utils/f2fs-tools: Update to 1.13.0
Daniel Engberg [Tue, 4 Feb 2020 01:10:17 +0000 (01:10 +0000)]
package/utils/f2fs-tools: Update to 1.13.0

Update f2fs-tools to 1.13.0
Remove upstreamed patches
Disable build of static library

Signed-off-by: Daniel Engberg <daniel.engberg.lists@pyret.net>
4 years agogeneric: refresh patches
Aleksander Jan Bajkowski [Sun, 9 Feb 2020 15:23:06 +0000 (16:23 +0100)]
generic: refresh patches

just run: make target/linux/refresh V=s

Fixes: 6e315de0f422acf66c3505a4ed8c095a0f5d3424
Signed-off-by: Aleksander Jan Bajkowski <A.Bajkowski@stud.elka.pw.edu.pl>
4 years agousbmode: Update modeswitch data to 20191128
Davide Fioravanti [Wed, 19 Feb 2020 18:43:00 +0000 (19:43 +0100)]
usbmode: Update modeswitch data to 20191128

Add support for new hardware

Signed-off-by: Davide Fioravanti <pantanastyle@gmail.com>
4 years agokernel: remove non-existant symbols from 4.19 config
Aleksander Jan Bajkowski [Tue, 18 Feb 2020 19:32:11 +0000 (20:32 +0100)]
kernel: remove non-existant symbols from 4.19 config

These symbols only exist in kernel version <= 4.15

Signed-off-by: Aleksander Jan Bajkowski <A.Bajkowski@stud.elka.pw.edu.pl>
4 years agokernel: replace SUBDIRS with M in package recipes
Tomasz Maciej Nowak [Mon, 20 Jan 2020 14:42:00 +0000 (15:42 +0100)]
kernel: replace SUBDIRS with M in package recipes

The SUBDIRS variable has been removed in kernel 5.4, and was deprecated
since the beginnig of kernel git history in favour of M or KBUILD_EXTMOD.

Signed-off-by: Tomasz Maciej Nowak <tomek_n@o2.pl>
4 years agolinux-firmware: update to 20200122
DENG Qingfang [Fri, 14 Feb 2020 13:41:06 +0000 (21:41 +0800)]
linux-firmware: update to 20200122

Update linux-firmware to 20200122

git log --pretty=oneline --abbrev-commit 20191215..20200122

1eb2408 linux-firmware: Update firmware file for Intel Bluetooth AX200
0dc1611 linux-firmware: Update firmware file for Intel Bluetooth AX201
d03f79c linux-firmware: Update firmware file for Intel Bluetooth 9560
aab62bc linux-firmware: Update firmware file for Intel Bluetooth 9260
ed0aa3a nvidia: add TU102/TU104/TU106 signed firmware
9c340bd amdgpu: update navi10 firmware for 19.50
3b4a503 amdgpu: Add navi10 TA ucode
16cc13a Merge branch 'v1.1.3' of https://github.com/ruiwang-mtk/linux_fw_vpu_v1.1.37f3177d mediatek: update MT8173 VPU firmware to v1.1.3
67d4ff5 Mellanox: Add new mlxsw_spectrum firmware xx.2000.2714
f1c9e7b radeon: update oland rlc microcode from amdgpu
b1dafb7 amdgpu: update vega20 microcode for 19.50
c38789e amdgpu: update vega12 microcode for 19.50
5a141c1 amdgpu: update vega10 microcode for 19.50
a03173a amdgpu: update picasso microcode for 19.50
86e9a5f amdgpu: update raven2 microcode for 19.50
febe09a amdgpu: update raven microcode for 19.50
af76fd0 amdgpu: update navi10 microcode for 19.50
b5b176a amdgpu: update navi14 microcode for 19.50
ad90178 amdgpu: add TA microcode for Raven asics
379551b qed: Add firmware 8.42.2.0
58b4003 Merge branch 'RB3-wlan-firmware-1387-v2' of https://github.com/andersson/linux-firmware
5967a45 Adjust WHENCE entry to check_whence doesn't complain
d1e743d Merge branch 'master' of https://github.com/NXP/mwifiex-firmware
d6219ab qcom: Switch SDM845 WLAN firmware
e65245c linux-firmware: add NXP firmware licence file
6871bff Merge branch 'ath10k-20191220' of git://git.kernel.org/pub/scm/linux/kernel/git/kvalo/linux-firmware
b142c2e ath10k: WCN3990 hw1.0: add firmware WLAN.HL.2.0-01387-QCAHLSWMTPLZ-1
8809b87 ath10k: QCA9984 hw1.0: update firmware-5.bin to 10.4-3.9.0.2-00070
513d70c ath10k: QCA988X hw2.0: update firmware-5.bin to 10.2.4-1.0-00047
203435b ath10k: QCA9888 hw2.0: update firmware-5.bin to 10.4-3.9.0.2-00070
a66d2fc ath10k: QCA9887 hw1.0: update firmware-5.bin to 10.2.4-1.0-00047
6d19154 ath10k: QCA6174 hw3.0: update board-2.bin
c4586ff linux-firmware: Update AMD cpu microcode

Signed-off-by: DENG Qingfang <dengqf6@mail2.sysu.edu.cn>
4 years agoiw: update to 5.4
DENG Qingfang [Wed, 12 Feb 2020 12:16:05 +0000 (20:16 +0800)]
iw: update to 5.4

Update iw to 5.4
This increases the ipk size of iw-tiny/full by about 400 bytes

Signed-off-by: DENG Qingfang <dengqf6@mail2.sysu.edu.cn>
4 years agolibbsd: update to 0.10.0
Rosen Penev [Thu, 20 Feb 2020 03:42:35 +0000 (19:42 -0800)]
libbsd: update to 0.10.0

Removed all upstream patches.

Added PKG_BUILD_PARALLEL for faster compilation.

Small Makefile rearrangements for consistency between packages.

Signed-off-by: Rosen Penev <rosenp@gmail.com>
4 years agobuild: Add additional kernel debug options
Hauke Mehrtens [Wed, 12 Feb 2020 10:49:02 +0000 (11:49 +0100)]
build: Add additional kernel debug options

Make it possible to activate some additional kernel debug options.
This can be used to debug some problems in kernel drivers.

Signed-off-by: Hauke Mehrtens <hauke.mehrtens@intel.com>
Reviewed-by: Alexandru Ardelean <ardeleanalex@gmail.com>
4 years agobuild: Add KCOV kernel code coverage for fuzzing
Hauke Mehrtens [Wed, 12 Feb 2020 10:49:01 +0000 (11:49 +0100)]
build: Add KCOV kernel code coverage for fuzzing

The adds an option to activate KCOV (Code coverage for fuzzing).

Signed-off-by: Hauke Mehrtens <hauke.mehrtens@intel.com>
Reviewed-by: Alexandru Ardelean <ardeleanalex@gmail.com>
4 years agobuild: Add option KERNEL_KASAN
Hauke Mehrtens [Wed, 12 Feb 2020 10:49:00 +0000 (11:49 +0100)]
build: Add option KERNEL_KASAN

The kernel kernel address sanitizer is able to detect some memory
bugs in the kernel like out of range array accesses.

Signed-off-by: Hauke Mehrtens <hauke.mehrtens@intel.com>
Reviewed-by: Alexandru Ardelean <ardeleanalex@gmail.com>
4 years agobuild: Add option KERNEL_UBSAN
Hauke Mehrtens [Wed, 12 Feb 2020 10:48:59 +0000 (11:48 +0100)]
build: Add option KERNEL_UBSAN

The kernel Undefined Behavior Sanitizer is able to detect some memory
bugs in the kernel like out of range array accesses.

Signed-off-by: Hauke Mehrtens <hauke.mehrtens@intel.com>
Reviewed-by: Alexandru Ardelean <ardeleanalex@gmail.com>
4 years agox86: Add missing kernel option CONFIG_X86_DECODER_SELFTEST
Hauke Mehrtens [Tue, 11 Feb 2020 18:01:24 +0000 (19:01 +0100)]
x86: Add missing kernel option CONFIG_X86_DECODER_SELFTEST

This option has now a different dependency and can be activated, set a
default value.

Fixes: 20b5a4ca01ca ("kernel: bump 4.19 to 4.19.101")
Signed-off-by: Hauke Mehrtens <hauke.mehrtens@intel.com>
Tested-by: Alexandru Ardelean <ardeleanalex@gmail.com>
4 years agorssileds: add dependencies based on LDFLAGS
Adrian Schmutzler [Thu, 20 Feb 2020 17:38:04 +0000 (18:38 +0100)]
rssileds: add dependencies based on LDFLAGS

This adds the direct dependencies introduced by TARGET_LDFLAGS
to the package's DEPENDS variable.

This was found by accidentally building rssileds on octeon, which
resulted in:

"Package rssileds is missing dependencies for the following libraries:
libnl-tiny.so"

Though the dependencies are provided when building for the
relevant targets ar71xx, ath79 and ramips, it seems more tidy to
specify them explicitly.

Signed-off-by: Adrian Schmutzler <freifunk@adrianschmutzler.de>
4 years agokirkwood: do not expose status LED to user config by default
Adrian Schmutzler [Fri, 21 Feb 2020 20:09:25 +0000 (21:09 +0100)]
kirkwood: do not expose status LED to user config by default

So far, the state of status LEDs is set up in 01_leds for many devices
in kirkwood target. As those LEDs are also controlled by diag.sh,
exposing them to the user via uci config by default seems not helpful
and might even have confusing results for the user.

Thus, remove the ucidef_set_led_default setup for power/status LED, but
do not touch the rest where user control is actually a feature.

Signed-off-by: Adrian Schmutzler <freifunk@adrianschmutzler.de>
4 years agokirkwood: set default state for status LEDs in device tree
Adrian Schmutzler [Wed, 19 Feb 2020 16:03:04 +0000 (17:03 +0100)]
kirkwood: set default state for status LEDs in device tree

This adds the default-state = "on"; statement for the power or
primary status LED in DTS on kirkwood. This will ensure that this
LED will be lit up very early in the boot process (i.e. before
diag.sh is executed) and thus will provide an additional hint to the
user when problems arise during early boot process.

Signed-off-by: Adrian Schmutzler <freifunk@adrianschmutzler.de>
4 years agokirkwood: add diag LEDs for ZyXEL NSA325
Adrian Schmutzler [Wed, 19 Feb 2020 15:39:32 +0000 (16:39 +0100)]
kirkwood: add diag LEDs for ZyXEL NSA325

This device has had no diag LEDs set up so far, so let's just
add them.

Signed-off-by: Adrian Schmutzler <freifunk@adrianschmutzler.de>
4 years agokirkwood: use generic diag.sh
Pawel Dembicki [Tue, 4 Feb 2020 16:26:47 +0000 (17:26 +0100)]
kirkwood: use generic diag.sh

This commit removes the target-specific diag.sh script. This way, the
generic one is used for the target, which uses DT-aliases to specify the
LEDs used.

Generic diag.sh allow to use different LEDs to indicate different states.
Non-red status LEDs for indicating boot and a running system.
Where possible, the red or orange LEDs are used to indicate failsafe
mode and a running upgrade.

Compile-tested: all target devices.
Run-tested: CheckPoint L-50

Signed-off-by: Pawel Dembicki <paweldembicki@gmail.com>
[remove unrelated cosmetic changes, rename some labels, add pogo_e02]
Signed-off-by: Adrian Schmutzler <freifunk@adrianschmutzler.de>
4 years agolldpd: bump to 1.0.5
Stijn Tintel [Thu, 20 Feb 2020 21:39:06 +0000 (23:39 +0200)]
lldpd: bump to 1.0.5

Signed-off-by: Stijn Tintel <stijn@linux-ipv6.be>
4 years agoath79: add support for Teltonika RUT955
Daniel Golle [Sun, 2 Feb 2020 16:09:50 +0000 (18:09 +0200)]
ath79: add support for Teltonika RUT955

Specification:

- 550/400/200 MHz (CPU/DDR/AHB)
- 128 MB of RAM (DDR2)
- 16 MB of FLASH (SPI NOR)
- 4x 10/100 Mbps Ethernet, with passive PoE support on LAN1
- 2T2R 2,4 GHz (AR9344)
- built-in 4G/3G module (example: Quectel EC-25EU)
- internal microSD slot (spi-mmc, buggy and disabled for now)
- RS232 on D-Sub9 port (Cypress ACM via USB, /dev/ttyACM0)
- RS422/RS485 (AR934x high speed UART, /dev/ttyATH1)
- analog 0-24V input (MCP3221)
- various digital inputs and outputs incl. a relay
- 11x LED (4 are driven by AR9344, 7 by 74HC595)
- 2x miniSIM slot (can be swapped via GPIO)
- 2x RP-SMA/F (Wi-Fi), 3x SMA/F (2x WWAN, GPS)
- 1x button (reset)
- DC jack for main power input (9-30 V)
- debugging UART available on PCB edge connector

Serial console (/dev/ttyS0) pinout:

- RX: pin1 (square) on top side of the main PCB (AR9344 is on top)
- TX: pin1 (square) on bottom side

Flash instruction:

Vendor firmware is based on OpenWrt CC release. Use the "factory" image
directly in GUI (make sure to uncheck "keep settings") or in U-Boot web
based recovery. To avoid any problems, make sure to first update vendor
firmware to latest version - "factory" image was successfully tested on
device running "RUT9XX_R_00.06.051" firmware and U-Boot "3.0.2".

Signed-off-by: Daniel Golle <daniel@makrotopia.org>
4 years agoserial: ar933x_uart: add rs485 support
Daniel Golle [Wed, 5 Feb 2020 15:00:57 +0000 (17:00 +0200)]
serial: ar933x_uart: add rs485 support

Add support for RS485 tranceiver with transmit/receive switch hooked
to a RTS GPIO pin.
Use the 'rts-gpios' and 'rs485-rts-active-low' properties as described
in devicetree/bindings/serial/rs485.yaml.

Signed-off-by: Daniel Golle <daniel@makrotopia.org>
4 years agoath79: add support for TP-Link TL-WA701ND/730RE/801ND/901ND v1
Adrian Schmutzler [Fri, 14 Feb 2020 14:38:55 +0000 (15:38 +0100)]
ath79: add support for TP-Link TL-WA701ND/730RE/801ND/901ND v1

This adds support for the various clones of the TL-WA830RE recently
supported in fb99ac6807f2 ("ath79: add support for TP-Link TL-WA830RE v1"):

- tplink,tl-wa701nd-v1
- tplink,tl-wa730re-v1
- tplink,tl-wa801nd-v1
- tplink,tl-wa830re-v1 (already supported)
- tplink,tl-wa901nd-v1

Since these devices are 100%-clones in ar71xx, this patch adds all
of them without run-testing (as this has been done for TL-WA830RE v1).

Specifications:
- SOC: Atheros AR7240
- CPU: 400MHz
- Flash: 4 MiB (Spansion S25FL032P)
- RAM: 32 MiB (Zentel A3S56D40FTP-G5)
- WLAN: Atheros AR9280 bgn 2x2
- Ethernet: 1 port (100M)

Flash instructions:
- install from u-boot with tftp (requires serial access)
  > setenv ipaddr a.b.c.d
  > setenv serverip e.f.g.h
  > tftpboot 0x80000000 \
      openwrt-ath79-tiny-tplink_tl-waxxxxx-v1-squashfs-factory.bin
  > erase 0x9f020000 +0x3c0000
  > cp.b 0x80000000 0x9f020000 0x3c0000
  > bootm 0x9f020000
- flash factory image from OEM WebUI
- sysupgrade from ar71xx image

Signed-off-by: Adrian Schmutzler <freifunk@adrianschmutzler.de>
4 years agoramips: fix HiWiFi HC5761A USB port
DENG Qingfang [Wed, 12 Feb 2020 13:14:26 +0000 (21:14 +0800)]
ramips: fix HiWiFi HC5761A USB port

Export GPIO 41 to power USB port

Signed-off-by: DENG Qingfang <dengqf6@mail2.sysu.edu.cn>
4 years agoramips: gsw_mt7621: disable PORT 5 MAC RX/TX flow control by default
Petr Štetiar [Tue, 11 Feb 2020 10:17:41 +0000 (11:17 +0100)]
ramips: gsw_mt7621: disable PORT 5 MAC RX/TX flow control by default

Looking at the current upstream driver implementation, it seems like the
TX/RX flow control is enabled only if the flow control pause option is
resolved from the device/link partner advertisements (or otherwise set).

On the other hand, our current in-tree driver force enables TX/RX
flow control by default, thus possibly leading to TX timeouts if the
other end sends pause frames (which are not properly handled?):

 WARNING: CPU: 3 PID: 0 at net/sched/sch_generic.c:320 dev_watchdog+0x1ac/0x324
 NETDEV WATCHDOG: eth0 (mtk_soc_eth): transmit queue 0 timed out

Disabling the flow control on PORT 5 MAC seems to fix this issues as the
pause frames are then filtered out. While at it, I'm removing the if
condition completely as suggested, since this code is run only on mt7621
SoC, so there is no need to check for the silicon revisions.

Ref: https://lists.openwrt.org/pipermail/openwrt-devel/2017-November/009882.html
Ref: https://forum.openwrt.org/t/mtk-soc-eth-watchdog-timeout-after-r11573/50000/12
Suggested-by: Felix Fietkau <nbd@nbd.name>
Reported-by: Rosen Penev <rosenp@gmail.com>
Signed-off-by: Petr Štetiar <ynezz@true.cz>
4 years agomt76: update to the latest version
Felix Fietkau [Thu, 20 Feb 2020 14:06:14 +0000 (15:06 +0100)]
mt76: update to the latest version

f4415afce213 mt76: mt76u: loop over all possible rx queues in mt76u_rx_tasklet
5b9f949cb760 mt76: mt76u: fix a possible memory leak in mt76u_init
fd892bc033fb mt76: mt76u: rely only on data buffer for usb control messagges

Signed-off-by: Felix Fietkau <nbd@nbd.name>
4 years agoath79: correct Siemens WS-AP3610 blocksize
David Bauer [Thu, 20 Feb 2020 09:29:09 +0000 (10:29 +0100)]
ath79: correct Siemens WS-AP3610 blocksize

With the wrong blocksize, the rootfs was not positioned on the boundary
of a block, thus breaking the mtdsplit driver.

Signed-off-by: David Bauer <mail@david-bauer.net>