target/linux/bcm27xx/patches-6.1/950-1233-ARM-dts-bcm2712-rpi-5-b-Add-eth_ledx-parameters.patch

   1 From eeb5969ae34df16024f39a77496a44ae94bfab13 Mon Sep 17 00:00:00 2001
   2 From: Phil Elwell <phil@raspberrypi.com>
   3 Date: Thu, 4 Jan 2024 13:56:39 +0000
   4 Subject: [PATCH] ARM: dts: bcm2712-rpi-5-b: Add eth_ledx parameters
   5
   6 Include the dtparams controlling the Ethernet jack LEDs, as used on
   7 other Pis.
   8
   9 See: https://github.com/raspberrypi/linux/issues/5825
  10
  11 Signed-off-by: Phil Elwell <phil@raspberrypi.com>
  12 ---
  13  arch/arm/boot/dts/bcm2712-rpi-5-b.dts | 2 ++
  14  arch/arm/boot/dts/overlays/README     | 6 +++---
  15  2 files changed, 5 insertions(+), 3 deletions(-)
  16
  17 --- a/arch/arm/boot/dts/bcm2712-rpi-5-b.dts
  18 +++ b/arch/arm/boot/dts/bcm2712-rpi-5-b.dts
  19 @@ -830,6 +830,8 @@ spi10_cs_pins: &spi10_cs_gpio1 {};
  20                 act_led_trigger = <&act_led>, "linux,default-trigger";
  21                 pwr_led_activelow = <&pwr_led>, "gpios:8";
  22                 pwr_led_trigger = <&pwr_led>, "linux,default-trigger";
  23 +               eth_led0 = <&phy1>,"led-modes:0";
  24 +               eth_led1 = <&phy1>,"led-modes:4";
  25                 drm_fb0_rp1_dsi0 = <&aliases>, "drm-fb0=",&dsi0;
  26                 drm_fb0_rp1_dsi1 = <&aliases>, "drm-fb0=",&dsi1;
  27                 drm_fb0_rp1_dpi = <&aliases>, "drm-fb0=",&dpi;
  28 --- a/arch/arm/boot/dts/overlays/README
  29 +++ b/arch/arm/boot/dts/overlays/README
  30 @@ -207,7 +207,7 @@ Params:
  31                                  0 means never downshift (default 2). Pi3B+ only.
  32
  33          eth_led0                Set mode of LED0 - amber on Pi3B+ (default "1"),
  34 -                                green on Pi4 (default "0").
  35 +                                green on Pi4/5 (default "0").
  36                                  The legal values are:
  37
  38                                  Pi3B+
  39 @@ -217,7 +217,7 @@ Params:
  40                                  4=link100/1000/activity  5=link10/1000/activity
  41                                  6=link10/100/activity    14=off    15=on
  42
  43 -                                Pi4
  44 +                                Pi4/5
  45
  46                                  0=Speed/Activity         1=Speed
  47                                  2=Flash activity         3=FDX
  48 @@ -226,7 +226,7 @@ Params:
  49                                  8=Link                   9=Activity
  50
  51          eth_led1                Set mode of LED1 - green on Pi3B+ (default "6"),
  52 -                                amber on Pi4 (default "8"). See eth_led0 for
  53 +                                amber on Pi4/5 (default "8"). See eth_led0 for
  54                                  legal values.
  55
  56          eth_max_speed           Set the maximum speed a link is allowed