Zoltan HERPAI [Tue, 21 Dec 2021 14:11:53 +0000 (15:11 +0100)]
generic/5.15: drop qca8k patches
Signed-off-by: Zoltan HERPAI <wigyori@uid0.hu>
Zoltan HERPAI [Tue, 21 Dec 2021 14:10:54 +0000 (15:10 +0100)]
sunxid1: drop backported patch for clock resets
Signed-off-by: Zoltan HERPAI <wigyori@uid0.hu>
Zoltan HERPAI [Tue, 16 Nov 2021 15:44:56 +0000 (16:44 +0100)]
sunxid1: add new target
Add new target for the Allwinner D1 RISC-V SoCs. The target includes
a number of backported patches, as well as a new SD-card format including
the sun20spl image. The board's bootrom will detect if an SD-card is inserted
and will try to init from there.
The installation instruction is the usual SD-card install method.
Signed-off-by: Zoltan HERPAI <wigyori@uid0.hu>
Zoltan HERPAI [Tue, 16 Nov 2021 15:40:45 +0000 (16:40 +0100)]
uboot-sunxid1: add new package
Add a D1-variant of u-boot for the RISC-V SoCs. The generated u-boot image
is called "TOC1" which is a mesh of an OpenSBI, a DTB and an u-boot-nodtb binary.
Signed-off-by: Zoltan HERPAI <wigyori@uid0.hu>
Zoltan HERPAI [Tue, 16 Nov 2021 15:42:12 +0000 (16:42 +0100)]
opensbi-d1: add new package
Above the usual OpenSBI inits, the D1 SoCs require additional inits to be
brought up properly.
Signed-off-by: Zoltan HERPAI <wigyori@uid0.hu>
Zoltan HERPAI [Tue, 16 Nov 2021 15:39:43 +0000 (16:39 +0100)]
sun20spl: add new package
AllWinner D1 RISC-V SoCs require an SPL which is not included in the u-boot
repository yet, for the various low-level inits.
Signed-off-by: Zoltan HERPAI <wigyori@uid0.hu>
Zoltan HERPAI [Sun, 16 Dec 2018 09:45:53 +0000 (10:45 +0100)]
generic: groundwork for RISC-V
Signed-off-by: Zoltan HERPAI <wigyori@uid0.hu>
Ansuel Smith [Sun, 19 Dec 2021 02:37:53 +0000 (03:37 +0100)]
generic: backport mirror mode and LAG feature for qca8k
Backport LAG and mirror mode feature for qca8k.
Signed-off-by: Ansuel Smith <ansuelsmth@gmail.com>
Ansuel Smith [Sat, 20 Nov 2021 22:10:20 +0000 (23:10 +0100)]
ipq40xx: refresh ess driver and phy with new api
Kernel 5.15 have some new api for ethtool and phy.
Add ifdef to fix compilation error.
Signed-off-by: Ansuel Smith <ansuelsmth@gmail.com>
Ansuel Smith [Sat, 20 Nov 2021 22:08:25 +0000 (23:08 +0100)]
ipq40xx: fix wrong nand definition for wpj419
Fix wrong nand definition for wpj419 that differ from the upstream
node name.
Signed-off-by: Ansuel Smith <ansuelsmth@gmail.com>
Ansuel Smith [Sat, 20 Nov 2021 22:07:21 +0000 (23:07 +0100)]
ipq40xx: refresh config for kernel 5.15
Refresh config for kernel 5.15 using make kernel_menuconfig
Signed-off-by: Ansuel Smith <ansuelsmth@gmail.com>
Ansuel Smith [Sat, 20 Nov 2021 22:06:34 +0000 (23:06 +0100)]
ipq40xx: refresh patches for kernel 5.15
- Drop upstream patch
- Refresh dts patch
Signed-off-by: Ansuel Smith <ansuelsmth@gmail.com>
Ansuel Smith [Sat, 20 Nov 2021 22:05:02 +0000 (23:05 +0100)]
ipq40xx: copy config and patch from 5.10 to 5.15
Copy config and patch from 5.10 to 5.15
Signed-off-by: Ansuel Smith <ansuelsmth@gmail.com>
Ansuel Smith [Fri, 5 Nov 2021 02:32:30 +0000 (03:32 +0100)]
ipq806x: fix dedicated krait cpufreq with kernel 5.15
Fix dedicated cpufreq for kernel 5.15 as they changed module
order and now it can happen that cpufreq probe after cache driver.
Also add lock between cache scaling in set_target as it's now required
by opp functions.
Signed-off-by: Ansuel Smith <ansuelsmth@gmail.com>
Ansuel Smith [Thu, 4 Nov 2021 21:37:23 +0000 (22:37 +0100)]
ipq806x: backport nand raname to kernel 5.10
Rename nand_controller to nand in kernel 5.10 to use the same dts across kernel version.
Signed-off-by: Ansuel Smith <ansuelsmth@gmail.com>
Ansuel Smith [Fri, 5 Nov 2021 00:14:57 +0000 (01:14 +0100)]
ipq806x: add testing kernel version 5.15
Refresh patch for 5.15
Rework tweak patch to sync with upstream ipq8064 dtsi.
Rename nand_controller to nand in every dts.
Signed-off-by: Ansuel Smith <ansuelsmth@gmail.com>
Ansuel Smith [Sat, 6 Nov 2021 13:58:30 +0000 (14:58 +0100)]
ipq806x: refresh config for kernel 5.15
Refreshed using make kernel_menuconfig CONFIG_TARGET=generic
Signed-off-by: Ansuel Smith <ansuelsmth@gmail.com>
Ansuel Smith [Thu, 4 Nov 2021 20:56:41 +0000 (21:56 +0100)]
ipq806x: copy config and patch from 5.10 to 5.15
Copy config and patch from kernel 5.10 to kernel 5.15
Signed-off-by: Ansuel Smith <ansuelsmth@gmail.com>
Ansuel Smith [Thu, 4 Nov 2021 20:59:09 +0000 (21:59 +0100)]
kernel: add new module for 5.15
Add new module require in 5.15
- Changes in block module
- Changes in netfilter module (log module unified)
- Changes in fs module (mainly new depends for cifs)
- Changes in lib add shared lib now used by more than 1 kmod
- Changes in crypto, dropped one crypto algo added arm crypto accellerator
- Changes in other, add zram default compressos choice and missing lib
by tpm module
Signed-off-by: Ansuel Smith <ansuelsmth@gmail.com>
Ansuel Smith [Thu, 4 Nov 2021 22:22:50 +0000 (23:22 +0100)]
generic: add support for 5.15
Add hash and enable kernel 5.15 for openwrt.
Signed-off-by: Ansuel Smith <ansuelsmth@gmail.com>
Ansuel Smith [Thu, 4 Nov 2021 22:22:29 +0000 (23:22 +0100)]
generic: refresh config for kernel 5.15
Refresh kernel 5.15 generic config file
Signed-off-by: Ansuel Smith <ansuelsmth@gmail.com>
Ansuel Smith [Sun, 7 Nov 2021 21:33:21 +0000 (22:33 +0100)]
generic: standardize tcp_no_window_check pending patch for 5.15
Standardize pending patch tcp_no_window_check patch as with
new kernel they added a check for global variables.
The 2 new condition are that they must be read-only or
the data pointer should not point to kernel/module global
data.
Remove the global variable and move it to a standard place
following other variables logic.
Signed-off-by: Ansuel Smith <ansuelsmth@gmail.com>
Ansuel Smith [Thu, 4 Nov 2021 23:48:27 +0000 (00:48 +0100)]
generic: rework pending patch for 5.15
Rework pending patch for kernel 5.15
Signed-off-by: Ansuel Smith <ansuelsmth@gmail.com>
Ansuel Smith [Thu, 4 Nov 2021 22:25:50 +0000 (23:25 +0100)]
generic: rework hack patch for 5.15
Rework hack patch in dir for kernel 5.15.
For the specific patch of packet mangeling introduce a new extra_priv_flags
as we don't have enough space to add additional flags in priv_flags.
Signed-off-by: Ansuel Smith <ansuelsmth@gmail.com>
Ansuel Smith [Thu, 4 Nov 2021 22:21:11 +0000 (23:21 +0100)]
generic: drop upstream patch for 5.15
Drop upstream patch from backport dir for kernel 5.15
Signed-off-by: Ansuel Smith <ansuelsmth@gmail.com>
Ansuel Smith [Thu, 4 Nov 2021 20:52:43 +0000 (21:52 +0100)]
generic: copy config and patch from 5.10 to 5.15
Copy config and patches from kernel 5.10 to kernel 5.15
Signed-off-by: Ansuel Smith <ansuelsmth@gmail.com>
Stijn Tintel [Wed, 17 Mar 2021 00:14:09 +0000 (02:14 +0200)]
kernel: drop obsolete kmod-video-core dependencies
These dependencies do not exist in any of the supported kernel versions.
Signed-off-by: Stijn Tintel <stijn@linux-ipv6.be>
Stijn Tintel [Wed, 17 Mar 2021 00:06:43 +0000 (02:06 +0200)]
kernel: drop obsolete symbols from kmod-video-core
These symbols don't exist in any of the supported kernel versions.
Signed-off-by: Stijn Tintel <stijn@linux-ipv6.be>
Daniel Golle [Mon, 20 Dec 2021 02:21:23 +0000 (02:21 +0000)]
procd: update to git HEAD
eb522fc uxc: consider uvol and etc location for configurations
16a6ee9 uxc: integrate console into uxc
129d050 remove ujail-console
Signed-off-by: Daniel Golle <daniel@makrotopia.org>
David Bauer [Sat, 18 Dec 2021 16:24:09 +0000 (17:24 +0100)]
hostapd: make OpenWrt statistics per-BSS
WNM and RRM statistics were incorrectly per-PHY, leading to shared
statistic counters per BSS.
Signed-off-by: David Bauer <mail@david-bauer.net>
David Bauer [Sat, 30 Oct 2021 22:11:51 +0000 (00:11 +0200)]
hostapd: provide BSS-transition-queries to ubus subscribers
Provide incoming BSS transition queries to ubus subscribers.
This allows external steering daemons to provide clients with
an optimal list of transition candidates.
This commit has no functional state in case no ubus subscriber is
present or it does not handle this ubus message.
To prevent hostapd from sending out a generic response by itself, a
subscribing daemon has to return a non-zero response code to hostapd.
Signed-off-by: David Bauer <mail@david-bauer.net>
David Bauer [Mon, 27 Sep 2021 13:53:25 +0000 (15:53 +0200)]
hostapd: WNM: allow specifying dialog-token
Backport a patch to allow extending the ubus BSS-transition method
for specifying individual dialog tokens for BSS transition
management requests.
This is required for handling BSS transition queries in the future.
Signed-off-by: David Bauer <mail@david-bauer.net>
David Bauer [Fri, 17 Dec 2021 23:33:57 +0000 (00:33 +0100)]
ramips: work around duplicate MAC address on U6 Lite
The UniFi 6 Lite has two MAC addresses for the 2.4 and 5GHz radio in
it's EEPROM partition.
On my unit these are
F4 92 BF A0 BB 6F
F6 92 BF A0 BB 6F
The problem with these is that mac80211 increases the first octet by
2, which leads to conflicting MAC addresses between radios.
Work around this problem for now by increasing the last octet by 1 on
the 5 GHz radio.
Ubiquiti increases the last octet by 2 for each subsequent VAP created
per radio. Ideally we should do the same, however this functionality is
currently lacking from mac80211.
Signed-off-by: David Bauer <mail@david-bauer.net>
Daniel Golle [Sat, 18 Dec 2021 01:45:44 +0000 (01:45 +0000)]
mediatek: mt7623: bpi-r2: add ethernet alias to device tree
Add ethernet0 alias in device tree to make U-Boot inherit the Ethernet
mac address (set via environment variable 'ethaddr') down to Linux.
Signed-off-by: Daniel Golle <daniel@makrotopia.org>
Hans Dedecker [Fri, 17 Dec 2021 20:04:54 +0000 (21:04 +0100)]
odhcp6c: update to latest git HEAD
39b584b Revert "dhcpv6: add a minimum valid lifetime for IA_PD updates"
c9578e1 dhcpv6: add support for null IA_PD valid lifetime
ca43ea3 dhcpv6: add a minimum valid lifetime for IA_PD updates
Signed-off-by: Hans Dedecker <dedeckeh@gmail.com>
Hans Dedecker [Fri, 17 Dec 2021 19:54:44 +0000 (20:54 +0100)]
netifd: update to latest git HEAD
5ca5e0b netifd: allow disabling rule/rule6 config sections
8875960 interface-ip: add support for IPv6 prefix invalidation
e589c05 interface-ip: use metric when looking for a route
b54ffde main: fix hotplug script usage message
Signed-off-by: Hans Dedecker <dedeckeh@gmail.com>
Sergey Ryazanov [Thu, 16 Dec 2021 22:23:08 +0000 (01:23 +0300)]
kernel: 5.10: consolidate mac80211 crypto options
Each of
- CRYPTO_AEAD2
- CRYPTO_AEAD
- CRYPTO_GF128MUL
- CRYPTO_GHASH
- CRYPTO_HASH2
- CRYPTO_HASH
- CRYPTO_MANAGER2
- CRYPTO_MANAGER
- CRYPTO_NULL2
either directly required for mac80211 crypto support, or directly
selected by such options. Support for the mac80211 crypto was enabled in
the generic config since
c7182123b9 ("kernel: make cryptoapi support
needed by mac80211 built-in"). So move the above options from the target
configs to the generic config to make it clear why do we need them.
CC: Felix Fietkau <nbd@nbd.name>
Signed-off-by: Sergey Ryazanov <ryazanov.s.a@gmail.com>
Sergey Ryazanov [Thu, 16 Dec 2021 22:23:07 +0000 (01:23 +0300)]
kernel: filter out both Clang and LLD versions
Both CLANG_VERSION and LLD_VERISON are autogenerated runtime
configuration options, so add them to the kernel configuration filter
and remove from generic and per-target configs to keep configs clean.
Signed-off-by: Sergey Ryazanov <ryazanov.s.a@gmail.com>
Ilya Lipnitskiy [Wed, 8 Dec 2021 01:28:23 +0000 (17:28 -0800)]
toolchain/gcc: refresh gcc-11.2.0 patch
Run make toolchain/gcc/minimal/refresh (with glibc, with musl
toolchain/gcc/{initial,final}/refresh don't work)
Fixes: ab241e0937c9 ("toolchain/gcc: fix build on MacOS arm64")
Signed-off-by: Ilya Lipnitskiy <ilya.lipnitskiy@gmail.com>
Ilya Lipnitskiy [Wed, 8 Dec 2021 01:28:22 +0000 (17:28 -0800)]
toolchain/gcc: replace revert with upstream fix
This will make upgrade to v11.3.0 easier and follows upstream more
closely.
Signed-off-by: Ilya Lipnitskiy <ilya.lipnitskiy@gmail.com>
Ilya Lipnitskiy [Wed, 8 Dec 2021 01:28:21 +0000 (17:28 -0800)]
toolchain/gcc: remove upstreamed patch, add backport
This patch has been upstream since GCC 10.
Dragan Mladjenovic (2):
Emit .note.GNU-stack for soft-float linux targets.
Emit .note.GNU-stack for hard-float linux targets.
Link: https://gcc.gnu.org/g:a3c1e1f2ff88
Link: https://gcc.gnu.org/g:54b3d52c3cca
Add backport patch to define TARGET_LIBC_GNUSTACK on musl to add
.note.GNU-stack on hard-float MIPS targets.
Link: https://gcc.gnu.org/g:25abbb924968
The net effect should be the exact same functionality while following
upstream code instead of a custom outdated patch.
Signed-off-by: Ilya Lipnitskiy <ilya.lipnitskiy@gmail.com>
John Audia [Fri, 17 Dec 2021 11:42:51 +0000 (06:42 -0500)]
kernel: bump 5.10 to 5.10.87
All patches automatically rebased.
Build system: x86_64
Build-tested: bcm2711/RPi4B, ipq806x/R7800*
Run-tested: bcm2711/RPi4B, ipq806x/R7800*
*Had to revert
7f1edbd41295dff9f2127b169fbc086c0fb2c14e in order to build
(binutils 2.37, https://bugs.openwrt.org/index.php?do=details&task_id=4149)
Signed-off-by: John Audia <graysky@archlinux.us>
John Audia [Thu, 16 Dec 2021 18:27:45 +0000 (13:27 -0500)]
kernel: bump 5.10 to 5.10.86
All patches automatically rebased.
Build system: x86_64
Build-tested: bcm2711/RPi4B, ipq806x/R7800*
Run-tested: bcm2711/RPi4B, ipq806x/R7800*
*Had to revert
7f1edbd41295dff9f2127b169fbc086c0fb2c14e in order to build
(binutils 2.37, https://bugs.openwrt.org/index.php?do=details&task_id=4149)
Signed-off-by: John Audia <graysky@archlinux.us>
John Audia [Tue, 14 Dec 2021 11:15:08 +0000 (06:15 -0500)]
kernel: bump 5.10 to 5.10.85
Removed target for patch which does not exist:
bcm27xx/patches-5.10/950-0249-kbuild-Disable-gcc-plugins.patch
All patches automatically rebased.
Build system: x86_64
Build-tested: bcm2711/RPi4B, ipq806x/R7800*
Run-tested: bcm2711/RPi4B, ipq806x/R7800*
* Had to revert
7f1edbd41295dff9f2127b169fbc086c0fb2c14e in order to build
(binutils 2.37, https://bugs.openwrt.org/index.php?do=details&task_id=4149)
Signed-off-by: John Audia <graysky@archlinux.us>
John Audia [Wed, 8 Dec 2021 11:14:30 +0000 (06:14 -0500)]
kernel: bump 5.10 to 5.10.84
All patches automatically rebased.
Build system: x86_64
Build-tested: bcm2711/RPi4B
Run-tested: bcm2711/RPi4B
Signed-off-by: John Audia <graysky@archlinux.us>
John Audia [Fri, 17 Dec 2021 11:48:52 +0000 (06:48 -0500)]
kernel: bump 5.4 to 5.4.167
All patches automatically rebased.
Build system: x86_64
Build-tested: ramips/mt7621*
*FS#4149 affects me so I had to revert
7f1edbd41295dff9f2127b169fbc086c0fb2c14e
in order to downgrade to 2.35.1
Signed-off-by: John Audia <graysky@archlinux.us>
John Audia [Thu, 16 Dec 2021 19:53:58 +0000 (14:53 -0500)]
kernel: bump 5.4 to 5.4.166
All patches automatically rebased.
Build system: x86_64
Build-tested: ramips/mt7621*
*FS#4149 affects me so I had to revert
7f1edbd41295dff9f2127b169fbc086c0fb2c14e
in order to downgrade to 2.35.1
Signed-off-by: John Audia <graysky@archlinux.us>
John Audia [Wed, 15 Dec 2021 11:20:33 +0000 (06:20 -0500)]
kernel: bump 5.4 to 5.4.165
All patches automatically rebased.
Build system: x86_64
Build-tested: ramips/mt7621*
*FS#4149 affects me so I had to revert
7f1edbd41295dff9f2127b169fbc086c0fb2c14e
in order to downgrade to 2.35.1
Signed-off-by: John Audia <graysky@archlinux.us>
Felix Fietkau [Tue, 14 Dec 2021 16:58:14 +0000 (17:58 +0100)]
mac80211: optimize airtime fairness code to reduce cpu usage
Signed-off-by: Felix Fietkau <nbd@nbd.name>
David Bauer [Thu, 16 Dec 2021 19:27:04 +0000 (20:27 +0100)]
hostapd: close correct blobmsg table
Signed-off-by: David Bauer <mail@david-bauer.net>
Sungbo Eo [Thu, 16 Dec 2021 13:14:48 +0000 (22:14 +0900)]
ramips: mt7620: tidy up 02_network
* fix alphabetic sorting
* consolidate duplicate cases
Signed-off-by: Sungbo Eo <mans0n@gorani.run>
Rafał Miłecki [Thu, 16 Dec 2021 07:25:18 +0000 (08:25 +0100)]
bcm4908: add uboot-envtools to default packages
It's required by sysupgrade to access UBI metadata partitions.
Fixes: 5f05795aa771 ("bcm4908: sysupgrade: add pkgtb format support")
Signed-off-by: Rafał Miłecki <rafal@milecki.pl>
Rafał Miłecki [Thu, 16 Dec 2021 06:07:34 +0000 (07:07 +0100)]
kernel: backport support for multicolor & RGB LEDs to 5.4
This is a requirement for backporting DT files defining such LEDs.
Signed-off-by: Rafał Miłecki <rafal@milecki.pl>
Felix Fietkau [Mon, 13 Dec 2021 17:15:07 +0000 (18:15 +0100)]
kernel: backport the upstream implementation of threaded NAPI to 5.4
The workqueue based implementation has a few corner cases and typically lower
performance than the upstream one
Signed-off-by: Felix Fietkau <nbd@nbd.name>
Rui Salvaterra [Tue, 14 Dec 2021 13:46:19 +0000 (13:46 +0000)]
ramips: remove Linux 5.4 support
We're at 5.10 stable, this can finally go.
Signed-off-by: Rui Salvaterra <rsalvaterra@gmail.com>
David Bauer [Tue, 14 Dec 2021 23:01:23 +0000 (00:01 +0100)]
ramips: fix Tenbay T-MB5EU v1 Wireless MAC
It was reported, that Tenbay T-MB5EU v1 do have incorrect Wireless MAC
address set on 2.4 and 5 GHz.
Some boards do not seem to have the correct MAC address set for the
external PHY of the MT7915 radio at caldata offset 0xa.
As the external PHY does not expose a DT binding (yet), fix up the mac
address in userspace.
Signed-off-by: David Bauer <mail@david-bauer.net>
David Bauer [Sat, 27 Nov 2021 21:08:28 +0000 (22:08 +0100)]
hostapd: add OpenWrt specific statistic counters
This adds a new struct for storing statistics not (yet) tracked by
hostapd regarding RRM and WNM activity.
These statistics can be read using the get_status hostapd interface ubus
method.
Signed-off-by: David Bauer <mail@david-bauer.net>
Hauke Mehrtens [Sat, 20 Nov 2021 23:11:24 +0000 (00:11 +0100)]
iw: Update to version 5.16
Revert a commit to allow providing CFLAGS and LIBS from OpenWrt package
Makefile.
This downgrades the nl80211.h to kernel 5.15 and removes FILS_CRYPTO_OFFLOAD.
This is needed to make it compatible with our patched mac80211 from
kernel 5.15
Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
Hauke Mehrtens [Sat, 20 Nov 2021 23:10:51 +0000 (00:10 +0100)]
libnl-tiny: update to the latest version
8e0555f attr.h: Add NLA_PUT_S32
Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
Hauke Mehrtens [Sun, 5 Dec 2021 15:36:05 +0000 (16:36 +0100)]
mac80211: Update to version 5.15.8
The following patches were backported from upstream before and are not
needed any more:
package/kernel/mac80211/patches/ath10k/081-ath10k-fix-module-load-regression-with-iram-recovery-feature.patch
package/kernel/mac80211/patches/ath10k/980-ath10k-fix-max-antenna-gain-unit.patch
package/kernel/mac80211/patches/build/010-headers-Add-devm_platform_get_and_ioremap_resource.patch
package/kernel/mac80211/patches/subsys/300-mac80211-drop-check-for-DONT_REORDER-in-__ieee80211_.patch
package/kernel/mac80211/patches/subsys/307-mac80211-do-not-access-the-IV-when-it-was-stripped.patch
package/kernel/mac80211/patches/subsys/308-mac80211-fix-radiotap-header-generation.patch
Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
Rafał Miłecki [Tue, 14 Dec 2021 16:57:49 +0000 (17:57 +0100)]
bcm4908: add fdt-utils to default packages
It's required by sysupgrade.
Fixes: 5f05795aa771 ("bcm4908: sysupgrade: add pkgtb format support")
Signed-off-by: Rafał Miłecki <rafal@milecki.pl>
Martin Schiller [Wed, 3 Nov 2021 16:16:52 +0000 (17:16 +0100)]
layerscape: armv7: refresh config-5.10
Signed-off-by: Martin Schiller <ms@dev.tdt.de>
Martin Schiller [Wed, 3 Nov 2021 13:31:50 +0000 (14:31 +0100)]
layerscape: armv7: copy config-5.4 to config-5.10
Signed-off-by: Martin Schiller <ms@dev.tdt.de>
Martin Schiller [Wed, 3 Nov 2021 10:29:35 +0000 (11:29 +0100)]
layerscape: armv8_64b: refresh config-5.10
Signed-off-by: Martin Schiller <ms@dev.tdt.de>
Martin Schiller [Wed, 3 Nov 2021 09:51:53 +0000 (10:51 +0100)]
layerscape: armv8_64b: copy config-5.4 to config-5.10
Signed-off-by: Martin Schiller <ms@dev.tdt.de>
Martin Schiller [Wed, 3 Nov 2021 09:36:35 +0000 (10:36 +0100)]
layerscape: armv8_64b: use non-SDK dts files for linux-5.10 or newer
Since we decided to drop the LSDK patches with linux-5.10, we now have
to switch to the corresponding upstream dts files as well.
Signed-off-by: Martin Schiller <ms@dev.tdt.de>
Martin Schiller [Wed, 3 Nov 2021 09:27:04 +0000 (10:27 +0100)]
layerscape: armv8_64b: fix KERNEL_LOADADDR for linux >= 5.8
In kernel versions newer than 5.8 the arm64 TEXT_OFFSET (0x80000) has
been set to 0x0 (and later removed). This will break Uimages with kernel
load addresses that aren't 2MiB aligned any longer. Resulting in the
kernel silently fail to boot. For layerscape armv8_64b targets this
needs to be changed to 0x80000000 (start of RAM).
Signed-off-by: Martin Schiller <ms@dev.tdt.de>
Martin Schiller [Wed, 3 Nov 2021 12:48:24 +0000 (13:48 +0100)]
layerscape: add patches for kernel 5.10
Signed-off-by: Martin Schiller <ms@dev.tdt.de>
Martin Schiller [Wed, 3 Nov 2021 09:46:35 +0000 (10:46 +0100)]
layerscape: add kernel 5.10 as testing version
This patch adds "KERNEL_TESTING_PATCHVER:=5.10" to the Makefile in
layerscape target to allow using Kernel 5.10 for testing.
Signed-off-by: Martin Schiller <ms@dev.tdt.de>
Martin Schiller [Wed, 3 Nov 2021 09:18:39 +0000 (10:18 +0100)]
layerscape: remove unneeded KERNEL_ENTRY_POINT definition
As KERNEL_ENTRY_POINT is identical to KERNEL_LOADADDR, drop it.
Signed-off-by: Martin Schiller <ms@dev.tdt.de>
Martin Schiller [Mon, 11 Oct 2021 10:54:48 +0000 (12:54 +0200)]
ls-ddr-phy: bump to LSDK-21.08
Update ls-ddr-phy to latest LSDK-21.08.
Signed-off-by: Martin Schiller <ms@dev.tdt.de>
Martin Schiller [Mon, 11 Oct 2021 10:54:09 +0000 (12:54 +0200)]
restool: bump to LSDK-21.08
Update restool to latest LSDK-21.08.
Signed-off-by: Martin Schiller <ms@dev.tdt.de>
Martin Schiller [Mon, 11 Oct 2021 10:53:06 +0000 (12:53 +0200)]
ls-dpl: bump to LSDK-21.08
Update ls-dpl to latest LSDK-21.08.
Signed-off-by: Martin Schiller <ms@dev.tdt.de>
Martin Schiller [Mon, 11 Oct 2021 10:52:10 +0000 (12:52 +0200)]
ls-mc: bump to LSDK-21.08
Update ls-mc to latest LSDK-21.08.
Signed-off-by: Martin Schiller <ms@dev.tdt.de>
Martin Schiller [Mon, 11 Oct 2021 10:51:13 +0000 (12:51 +0200)]
ppfe-firmware: bump to LSDK-21.08
Update ppfe-firmware to latest LSDK-21.08.
Switched to AUTORELEASE for simplicity.
Signed-off-by: Martin Schiller <ms@dev.tdt.de>
Martin Schiller [Mon, 11 Oct 2021 10:49:56 +0000 (12:49 +0200)]
fman-ucode: bump to LSDK-21.08
Just update PKG_VERSION/PKG_MIRROR_HASH since fman-ucode
of LSDK-21.08 had no changes.
Switched to AUTORELEASE for simplicity.
Signed-off-by: Martin Schiller <ms@dev.tdt.de>
Martin Schiller [Mon, 11 Oct 2021 10:43:55 +0000 (12:43 +0200)]
tfa-layerscape: bump to LSDK-21.08
Update tfa package to latest LSDK-21.08.
Signed-off-by: Martin Schiller <ms@dev.tdt.de>
Martin Schiller [Thu, 7 Oct 2021 06:56:19 +0000 (08:56 +0200)]
uboot-layerscape: bump to LSDK-21.08
Update layerscape u-boot package to LSDK-21.08 and drop patches which
are no longer needed.
The new env variable 'fsl_bootcmd_mcinitcmd_set' is needed to protect
the configured bootcmd and mc_init values. See [1] for more
informations.
[1] https://source.denx.de/u-boot/u-boot/-/commit/
b62c174e861bddc3c7131045ed018556645cecb9
Signed-off-by: Martin Schiller <ms@dev.tdt.de>
Martin Schiller [Mon, 11 Oct 2021 10:46:38 +0000 (12:46 +0200)]
ls-rcw: bump to LSDK-21.08
Update ls-rcw to latest LSDK-21.08.
Drop patch 0001 since it had been integrated.
Signed-off-by: Martin Schiller <ms@dev.tdt.de>
Rui Salvaterra [Thu, 9 Sep 2021 08:44:41 +0000 (09:44 +0100)]
ramips: switch to kernel 5.10
Tested on mt7621 (Redmi AC2100) and running stable for several months.
Signed-off-by: Rui Salvaterra <rsalvaterra@gmail.com>
Tested-by: Stijn Segers <foss@volatilesystems.org>
Tested-by: Eneas U de Queiroz <cotequeiroz@gmail.com>
Pawel Dembicki [Thu, 10 Jun 2021 15:17:23 +0000 (17:17 +0200)]
ramips: mt7620: use OKLI loader with Jboot devices
Jboot devices have problem with >2MB kernelsize. The only way to avoid
this problem is use small loader.
This patch switch all mt7620 Jboot devices to lzma OKLI loader.
Suggested-by: Szabolcs Hubai <szab.hu@gmail.com>
Co-authored-by: Michael Pratt <mcpratt@pm.me>
Signed-off-by: Pawel Dembicki <paweldembicki@gmail.com>
Rafał Miłecki [Mon, 13 Dec 2021 17:19:05 +0000 (18:19 +0100)]
bcm53xx: sysupgrade: fix support for Luxul's legacy firmware format
Fixes: 80041dea7094 ("bcm53xx: sysupgrade: refactor handling different firmware formats")
Signed-off-by: Rafał Miłecki <rafal@milecki.pl>
Rafał Miłecki [Mon, 13 Dec 2021 12:47:39 +0000 (13:47 +0100)]
otrx: update to the latest master
56e8e19 otrx: support TRX from stdin when extracting
a37ccaf otrx: support unsorted partitions offsets
1fa145e otrx: extract shared code opening & parsing TRX format
4ecefda otrx: allow validating TRX from stdin
cf01e69 otrx: avoid unneeded fseek() when calculating CRC32
Fixes: 80041dea7094 ("bcm53xx: sysupgrade: refactor handling different firmware formats")
Signed-off-by: Rafał Miłecki <rafal@milecki.pl>
Rafał Miłecki [Wed, 8 Dec 2021 11:21:48 +0000 (12:21 +0100)]
bcm4908: sysupgrade: add pkgtb format support
BCM4908 devices with U-Boot use pkgtb firmware format. It's based on
U-Boot's FIT: DTB with configurations, images & embedded data.
This format contains bootfs, rootfs and optionally a first stage U-Boot
loader. Contained images need to be extracted & flashed.
Broadcom used two sets of firmwares: main & backup. It uses UBI volumes
"metadata1" & "metadata2" for storing U-Boot env variables with info
about flashed images.
Signed-off-by: Rafał Miłecki <rafal@milecki.pl>
Rafał Miłecki [Tue, 7 Dec 2021 12:00:02 +0000 (13:00 +0100)]
dtc: support printing binary data with fdtget
It's needed for extracting binary images.
Cc: Yousong Zhou <yszhou4tech@gmail.com>
Signed-off-by: Rafał Miłecki <rafal@milecki.pl>
Rafał Miłecki [Tue, 7 Dec 2021 12:00:01 +0000 (13:00 +0100)]
dtc: import package for dtc & fdt from packages feed
fdt* utils are needed by targets that use U-Boot FIT images for
sysupgrade. It includes all recent BCM4908 SoC routers as Broadcom
switched from CFE to U-Boot.
fdtget is required for extracting images (bootfs & rootfs) from
Broadcom's ITB. Extracted images can be then flashed to UBI volumes.
sysupgrade is core functionality so it needs dtc as part of base code
base.
Cc: Yousong Zhou <yszhou4tech@gmail.com>
Signed-off-by: Rafał Miłecki <rafal@milecki.pl>
Moritz Warning [Sat, 11 Dec 2021 08:33:46 +0000 (09:33 +0100)]
treewide: use uniform vendor value for british telecom
British Telecom is mostly known as BT.
Signed-off-by: Moritz Warning <moritzwarning@web.de>
John Audia [Wed, 1 Dec 2021 11:28:02 +0000 (06:28 -0500)]
kernel: bump 5.10 to 5.10.83
Removed upstreamed:
bcm53xx/patches-5.10/033-v5.16-0024-ARM-dts-BCM5301X-Fix-I2C-controller-interrupt.patch[1]
bcm53xx/patches-5.10/033-v5.16-0025-ARM-dts-BCM5301X-Add-interrupt-properties-to-GPIO-no.patch[2]
All other patches automatically rebased.
1. https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git/commit/?h=v5.10.83&id=
b2cd6fdcbe0a5cb44e4610a08cc58261d494a885
2. https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git/commit/?h=v5.10.83&id=
9db1d4a3c2700e1cc84c3d61199411d75c2a3ec6
Build system: x86_64*
Build-tested: bcm2711/RPi4B, ipq806x/R7800†
Run-tested: bcm2711/RPi4B, ipq806x/R7800†
* Had to revert
7c99085bd69742f66207d61e9f2da5ec4f8f9d2f in order to build
(latest bump of ca-certificates)
† Had to revert
7f1edbd41295dff9f2127b169fbc086c0fb2c14e in order to build
(binutils 2.37, https://bugs.openwrt.org/index.php?do=details&task_id=4149)
Signed-off-by: John Audia <graysky@archlinux.us>
Enrico Mioso [Fri, 3 Dec 2021 16:32:20 +0000 (17:32 +0100)]
ipq40xx: fix reset button GPIO for GL.iNet GL-B2200
GL.iNet's U-Boot checks for GPIO 40, not 43.
Changing this allows the RESET button to work as expected.
Signed-off-by: Enrico Mioso <mrkiko.rs@gmail.com>
CC: Daniel Golle <daniel@makrotopia.org>
CC: Li Zhang <li.zhang@gl-inet.com>
Kyoungkyu Park [Sat, 13 Nov 2021 16:03:24 +0000 (01:03 +0900)]
ramips: add support for HUMAX E10
HUMAX E10 (also known as HUMAX QUANTUM E10) is a 2.4/5GHz band AC router,
based on MediaTek MT7621A.
Specifications:
- SoC: MT7621A
- RAM: DDR3 128MB
- Flash: SPI NOR 16MB (MXIC MX25L12805D)
- WiFi:
- 2.4GHz: MT7615
- 5GHz: MT7615
- Ethernet: 2x 10/100/1000Mbps
- Switch: SoC internal
- USB: 1x USB 2.0 Type-A
- UART: J1 (57600 8N1)
- pinout: [3V3] (RXD) (GND) (TXD)
Installation via web interface:
- Flash **factory** image through the stock web interface.
Recovery procedure:
1. Connect ethernet cable between Router **LAN** port and PC Ethernet port.
2. Set your computer to a static IP **192.168.1.1**
3. Turn the device off and wait a few seconds. Hold the WPS button on front
of device and insert power.
4. Send a firmware image to **192.168.1.6** using TFTP.
You can use any TFTP client. (tftp, curl, Tftpd64...)
- It can accept both images which is
HUMAX stock firmware dump (0x70000-0x1000000) image
and OpenWRT **sysupgrade** image.
Signed-off-by: Kyoungkyu Park <choryu.park@choryu.space>
[remove trailing whitespace]
Signed-off-by: Sungbo Eo <mans0n@gorani.run>
Sungbo Eo [Sun, 12 Dec 2021 11:25:56 +0000 (20:25 +0900)]
ramips: mt76x8: tidy up 02_network
* fix alphabetic sorting
* consolidate duplicate cases
Signed-off-by: Sungbo Eo <mans0n@gorani.run>
Sungbo Eo [Sat, 4 Dec 2021 17:08:48 +0000 (02:08 +0900)]
build: image: improve zip build recipe
* clean before build
* specify executable path
* allow adding extra options for zip
* use basename of $@
Signed-off-by: Sungbo Eo <mans0n@gorani.run>
Felix Fietkau [Tue, 30 Nov 2021 10:37:15 +0000 (11:37 +0100)]
kernel: fix RCU issue in xt_FLOWOFFLOAD patch
cond_resched() may not be called in a rcu-locked section
Signed-off-by: Felix Fietkau <nbd@nbd.name>
Daniel Golle [Sat, 11 Dec 2021 03:16:16 +0000 (03:16 +0000)]
procd: update to git HEAD
bb95fe8 jail: make sure jailed process is terminated
Signed-off-by: Daniel Golle <daniel@makrotopia.org>
Christian Lamparter [Fri, 10 Dec 2021 23:09:13 +0000 (00:09 +0100)]
ath79: fix various dts warnings
ar9344_openmesh_mr600-v1.dts:40.10-44.5: Warning (gpios_property):
/leds-ath9k/wifi2g: Missing property '#gpio-cells' in node
/ahb/pcie-controller@
180c0000/wifi@0,0 or bad phandle
=> added gpio-controller + #gpio-cells
qca955x_zyxel_nbg6x16.dtsi:121.3-13: Warning (reg_format):
/ahb/usb@
1b000000/port@1:reg: property has invalid length (4 bytes)
(#address-cells == 2, #size-cells == 1)
../dts/qca955x_zyxel_nbg6x16.dtsi:131.3-13: Warning (reg_format):
/ahb/usb@
1b400000/port@1:reg: property has invalid length (4 bytes)
(#address-cells == 2, #size-cells == 1)
qca955x_zyxel_nbg6x16.dtsi:120.20-123.4: Warning (avoid_default_addr_size):
/ahb/usb@
1b000000/port@1: Relying on default #address-cells value
=> ath79's usb-nodes are missing the address- and size-cells properties.
These are needed for usb led trigger support.
ar7242_ubnt_sw.dtsi:54.4-14: Warning (reg_format): /gpio_spi/gpio_spi@0:reg:
property has invalid length (4 bytes) (#address-cells == 1, #size-cells == 1)
=> the #address-cells and #size-cells had to be nudged.
qca9531_dlink_dch-g020-a1.dts:19.6-39.4: Warning (i2c_bus_bridge):
/i2c: incorrect #size-cells for I2C bus
=> #size-cells = <0>;
Signed-off-by: Christian Lamparter <chunkeey@gmail.com>
Janpieter Sollie [Thu, 9 Dec 2021 12:27:49 +0000 (13:27 +0100)]
rtl8812au-ct: update driver to be ready for 5.15
update rtl8812au-ct driver to be ready for 5.15 Linux.
Signed-off-by: Janpieter Sollie <janpieter.sollie@edpnet.be>
[added commit message from PR with changes, added tag to subject]
Signed-off-by: Christian Lamparter <chunkeey@gmail.com>
Joel Linn [Wed, 8 Dec 2021 10:07:50 +0000 (11:07 +0100)]
lantiq: fixed wifi support for AVM FRITZ!Box 7430
adds the correct offset for the calibration data.
The values are according to the OpenWrt Forum Thread:
"Fritzbox 7430 and wifi".
Link: <https://forum.openwrt.org/t/fritzbox-7430-and-wifi/86944>
Reported-by: RENErica
Signed-off-by: Joel Linn <jl@conductive.de>
[changed commit message]
Signed-off-by: Christian Lamparter <chunkeey@gmail.com>
Ryan Mounce [Tue, 16 Nov 2021 11:25:19 +0000 (21:55 +1030)]
ath79: add support for WD My Net N600
SoC: AR9344
RAM: 128MB
Flash: 16MiB SPI NOR
5GHz WiFi: AR9382 PCIe 2x2:2 802.11n
2.4GHz WiFi: AR9344 (SoC) AHB 2x2:2 802.11n
5x Fast ethernet via SoC switch (green LEDs)
1x USB 2.0
4x front LEDs from SoC GPIO
1x front WPS button from SoC GPIO
1x bottom reset button from SoC GPIO
UART header JP1, 115200 no parity 1 stop
TX
GND
VCC
(N/P)
RX
Flash factory image via "emergency room" recovery:
- Configure your computer with a static IP 192.168.1.123/24
- Connect to LAN port on the N600 switch
- Hold reset putton
- Power on, holding reset until the power LED blinks slowly
- Visit http://192.168.1.1/ and upload OpenWrt factory image
- Wait at least 5 minutes for flashing, reboot and key generation
- Visit http://192.168.1.1/ (OpenWrt LuCI) and upload OpenWrt sysupgrade image
Signed-off-by: Ryan Mounce <ryan@mounce.com.au>
[dt leds preparations]
Signed-off-by: Christian Lamparter <chunkeey@gmail.com>
Olivier Valentin [Thu, 2 Dec 2021 16:05:18 +0000 (17:05 +0100)]
ath79: add support for jjPlus JWAP230
The jjPlus JWAP230 is an access point board built around the QCA9558,
with built-in 2.4GHz 3x3 N WiFi (28dBm). It can be expanded with 2
mini-PCIe boards, and has an USB2 root port.
Specifications:
- SOC: Qualcomm Atheros QCA9558
- CPU: 720MHz
- H/W switch: QCA8327 rev 2
- Flash: 16 MiB SPI NOR (en25qh128)
- RAM: 128 MiB DDR2
- WLAN: AR9550 built-in SoC bgn 3T3R (ath9k)
- PCI: 2x mini-PCIe (optional 5V)
- LEDs: 6x LEDs (3 are currently available)
- Button: 1x Reset (not yet defined)
- USB2:
- 1x Type A root port
- 1x combined mini-PCIe
- Ethernet:
- 2x 10/100/1000 (1x PoE 802.3af (36-57 V))
Notes:
The device used to be supported in the ar71xx target.
For upgrades: Please use "sysupgrade --force -n <image>".
This will restore the device back to OpenWrt defaults!
MAC address assignment:
use source
LAN art 0x0
WAN art 0x6
WLAN art 0x1002 (as part of the calibration data)
Flash instructions:
- install from u-boot with tftp (requires serial access)
> setenv ipaddr a.b.c.d
> setenv serverip e.f.g.h
> tftp 0x80060000 \
openwrt-ath79-generic-jjplus_jwap230-squashfs-sysupgrade.bin
> erase 0x9f050000 +${filesize}
> cp.b $fileaddr 0x9f050000 $filesize
> setenv bootcmd bootm 0x9f050000
> saveenv
Signed-off-by: Olivier Valentin <valentio@free.fr>
[Added DT-Leds (based on ar71xx), Added more notes about sysupgrade,
fixed "qca9550" to match SoC in commit and dts file name]
Signed-off-by: Christian Lamparter <chunkeey@gmail.com>
Christian Lamparter [Sat, 4 Dec 2021 20:52:22 +0000 (21:52 +0100)]
x86: remove old lzma tuning patch
Chen Minqiang reported in his GitHub PR #4733 that:
With CONFIG_TARGET_INITRAMFS_COMPRESSION_LZMA=y option set,
the popular x86/amd64 target's initramfs-kernel failed to boot.
The cause for this boot failure is that the LZMA compression
uses a the first bytes to encode the compression parameters.
It does not have a fixed magic. Yes, this only works if the
the existing lzma options in the upstream are not changed.
This patch does away with OpenWrt special LZMA options tuning
since it is rather unlikely that upstream will improve the
compression algorithm detection after all this time. Even
though, the tuning produced a smaller initramfs (~1.1% in a
spot check).
Link: <https://github.com/openwrt/openwrt/pull/4733>
Reported-by: Chen Minqiang <ptpt52@gmail.com>
Signed-off-by: Christian Lamparter <chunkeey@gmail.com>
projects / openwrt / staging / wigyori.git / log