tools/zstd: enable position independent code compilation

[openwrt/openwrt.git] / target / linux / oxnas / files / arch / arm / boot / dts / ox820-shuttle-kd20.dts

diff --git a/target/linux/oxnas/files/arch/arm/boot/dts/ox820-shuttle-kd20.dts b/target/linux/oxnas/files/arch/arm/boot/dts/ox820-shuttle-kd20.dts
index 61ea2b57a74ca483304da439f51ba9bbf81107a1..2cff439c25964faccf135e4e12a8616906e6018c 100644 (file)
--- a/target/linux/oxnas/files/arch/arm/boot/dts/ox820-shuttle-kd20.dts
+++ b/target/linux/oxnas/files/arch/arm/boot/dts/ox820-shuttle-kd20.dts
@@ -4,6 +4,7 @@
 
 #include <dt-bindings/gpio/gpio.h>
 #include <dt-bindings/input/input.h>
+#include <dt-bindings/thermal/thermal.h>
 
 / {
        model = "Shuttle KD20";
@@ -30,13 +31,48 @@
                led-upgrade = &led_warn;
        };
 
+       thermal-zones {
+               chassis-thermal {
+                       /* Poll every 20 seconds */
+                       polling-delay = <20000>;
+                       /* Poll every 2nd second when cooling */
+                       polling-delay-passive = <2000>;
+
+                       thermal-sensors = <&hdd0_temp>, <&hdd1_temp>;
+
+                       trips {
+                               chassis_alert0: chassis-alert0 {
+                                       /* At 43 degrees turn on fan */
+                                       temperature = <43000>;
+                                       hysteresis = <3000>;
+                                       type = "active";
+                               };
+
+                               chassis_alert1: chassis-alert1 {
+                                       /* At 60 degrees emergency shutdown */
+                                       temperature = <60000>;
+                                       hysteresis = <2000>;
+                                       type = "critical";
+                               };
+                       };
+
+                       cooling-maps {
+                               map0 {
+                                       trip = <&chassis_alert0>;
+                                       cooling-device = <&system_fan THERMAL_NO_LIMIT THERMAL_NO_LIMIT>;
+                               };
+                       };
+               };
+       };
+
        i2c-gpio {
                compatible = "i2c-gpio";
-               sda-gpios = <&gpio1 9 (GPIO_ACTIVE_HIGH|GPIO_LINE_OPEN_DRAIN)>;
-               sck-gpios = <&gpio1 10 (GPIO_ACTIVE_HIGH|GPIO_LINE_OPEN_DRAIN)>;
+               sda-gpios = <&gpio1 9 (GPIO_ACTIVE_HIGH|GPIO_OPEN_DRAIN)>;
+               sck-gpios = <&gpio1 10 (GPIO_ACTIVE_HIGH|GPIO_OPEN_DRAIN)>;
                i2c-gpio,delay-us = <10>;
                #address-cells = <1>;
                #size-cells = <0>;
+
                rtc0: rtc@51 {
                        compatible = "nxp,pcf8563";
                        reg = <0x51>;
@@ -112,11 +148,12 @@
                gpios = <&gpio1 11 GPIO_ACTIVE_HIGH>;
        };
 
-       gpio-fan {
+       system_fan: gpio-fan {
                compatible = "gpio-fan";
-               gpios = <&gpio0 2 GPIO_ACTIVE_LOW>;
+               gpios = <&gpio0 2 GPIO_ACTIVE_HIGH>;
                gpio-fan,speed-map = <0    0
                                      3000 1>;
+               #cooling-cells = <2>;
        };
 
        gpio-poweroff {
@@ -193,6 +230,16 @@
 &sata {
        status = "okay";
        nr-ports = <2>;
+
+       hdd0_temp: sata-port@0 {
+               reg = <0>;
+               #thermal-sensor-cells = <0>;
+       };
+
+       hdd1_temp: sata-port@1 {
+               reg = <1>;
+               #thermal-sensor-cells = <0>;
+       };
 };
 
 &pcie_phy {