/*
- * Copyright (c) 2015-2018, ARM Limited and Contributors. All rights reserved.
+ * Copyright (c) 2015-2019, ARM Limited and Contributors. All rights reserved.
*
* SPDX-License-Identifier: BSD-3-Clause
*/
* authentication instructions from lower ELs.
* ---------------------------------------------------------------------
*/
- mov_imm x0, ((SCR_RESET_VAL | SCR_EA_BIT | SCR_SIF_BIT | \
- SCR_API_BIT | SCR_APK_BIT) \
+ mov_imm x0, ((SCR_RESET_VAL | SCR_EA_BIT | SCR_SIF_BIT) \
& ~(SCR_TWE_BIT | SCR_TWI_BIT | SCR_SMD_BIT))
+#if CTX_INCLUDE_PAUTH_REGS
+ /*
+ * If the pointer authentication registers are saved during world
+ * switches, enable pointer authentication everywhere, as it is safe to
+ * do so.
+ */
+ orr x0, x0, #(SCR_API_BIT | SCR_APK_BIT)
+#endif
msr scr_el3, x0
/* ---------------------------------------------------------------------
*
* MDCR_EL3.TPM: Set to zero so that EL0, EL1, and EL2 System register
* accesses to all Performance Monitors registers do not trap to EL3.
+ *
+ * MDCR_EL3.SCCD: Set to one so that cycle counting by PMCCNTR_EL0 is
+ * prohibited in Secure state. This bit is RES0 in versions of the
+ * architecture earlier than ARMv8.5, setting it to 1 doesn't have any
+ * effect on them.
+ *
+ * MDCR_EL3.SPME: Set to zero so that event counting by the programmable
+ * counters PMEVCNTR<n>_EL0 is prohibited in Secure state. If ARMv8.2
+ * Debug is not implemented this bit does not have any effect on the
+ * counters unless there is support for the implementation defined
+ * authentication interface ExternalSecureNoninvasiveDebugEnabled().
* ---------------------------------------------------------------------
*/
- mov_imm x0, ((MDCR_EL3_RESET_VAL | MDCR_SDD_BIT | MDCR_SPD32(MDCR_SPD32_DISABLE)) \
- & ~(MDCR_TDOSA_BIT | MDCR_TDA_BIT | MDCR_TPM_BIT))
+ mov_imm x0, ((MDCR_EL3_RESET_VAL | MDCR_SDD_BIT | \
+ MDCR_SPD32(MDCR_SPD32_DISABLE) | MDCR_SCCD_BIT) & \
+ ~(MDCR_SPME_BIT | MDCR_TDOSA_BIT | MDCR_TDA_BIT | \
+ MDCR_TPM_BIT))
+
msr mdcr_el3, x0
+ /* ---------------------------------------------------------------------
+ * Initialise PMCR_EL0 setting all fields rather than relying
+ * on hw. Some fields are architecturally UNKNOWN on reset.
+ *
+ * PMCR_EL0.LP: Set to one so that event counter overflow, that
+ * is recorded in PMOVSCLR_EL0[0-30], occurs on the increment
+ * that changes PMEVCNTR<n>_EL0[63] from 1 to 0, when ARMv8.5-PMU
+ * is implemented. This bit is RES0 in versions of the architecture
+ * earlier than ARMv8.5, setting it to 1 doesn't have any effect
+ * on them.
+ *
+ * PMCR_EL0.LC: Set to one so that cycle counter overflow, that
+ * is recorded in PMOVSCLR_EL0[31], occurs on the increment
+ * that changes PMCCNTR_EL0[63] from 1 to 0.
+ *
+ * PMCR_EL0.DP: Set to one so that the cycle counter,
+ * PMCCNTR_EL0 does not count when event counting is prohibited.
+ *
+ * PMCR_EL0.X: Set to zero to disable export of events.
+ *
+ * PMCR_EL0.D: Set to zero so that, when enabled, PMCCNTR_EL0
+ * counts on every clock cycle.
+ * ---------------------------------------------------------------------
+ */
+ mov_imm x0, ((PMCR_EL0_RESET_VAL | PMCR_EL0_LP_BIT | \
+ PMCR_EL0_LC_BIT | PMCR_EL0_DP_BIT) & \
+ ~(PMCR_EL0_X_BIT | PMCR_EL0_D_BIT))
+
+ msr pmcr_el0, x0
+
/* ---------------------------------------------------------------------
* Enable External Aborts and SError Interrupts now that the exception
* vectors have been setup.
* ---------------------------------------------------------------------
*/
.if \_init_c_runtime
-#if defined(IMAGE_BL31) || (defined(IMAGE_BL2) && BL2_AT_EL3)
+#if defined(IMAGE_BL31) || (defined(IMAGE_BL2) && BL2_AT_EL3 && BL2_INV_DCACHE)
/* -------------------------------------------------------------
* Invalidate the RW memory used by the BL31 image. This
* includes the data and NOBITS sections. This is done to
bl zeromem
#endif
-#if defined(IMAGE_BL1) || (defined(IMAGE_BL2) && BL2_IN_XIP_MEM)
+#if defined(IMAGE_BL1) || (defined(IMAGE_BL2) && BL2_AT_EL3 && BL2_IN_XIP_MEM)
adrp x0, __DATA_RAM_START__
add x0, x0, :lo12:__DATA_RAM_START__
adrp x1, __DATA_ROM_START__