f05a290d2f8945f33af817e7f58a714c3d0ad6d6
[openwrt/staging/blocktrron.git] / target / linux / ath79 / dts / qca9561_tplink_archer-c59-v1.dts
1 // SPDX-License-Identifier: GPL-2.0-or-later OR MIT
2
3 #include "qca9561_tplink_archer-c5x.dtsi"
4
5 / {
6 compatible = "tplink,archer-c59-v1", "qca,qca9560";
7 model = "TP-Link Archer C59 v1";
8
9 aliases {
10 label-mac-device = &eth1;
11 };
12 };
13
14 &leds {
15 usb {
16 label = "green:usb";
17 gpios = <&led_gpio 7 GPIO_ACTIVE_LOW>;
18 linux,default-trigger = "usbport";
19 trigger-sources = <&hub_port0>;
20 };
21 };
22
23 &usb0 {
24 status = "okay";
25 };
26
27 &usb_phy0 {
28 status = "okay";
29 };
30
31 &spi {
32 status = "okay";
33
34 flash@0 {
35 compatible = "jedec,spi-nor";
36 reg = <0>;
37 spi-max-frequency = <25000000>;
38
39 partitions {
40 compatible = "fixed-partitions";
41 #address-cells = <1>;
42 #size-cells = <1>;
43
44 partition@0 {
45 label = "u-boot";
46 reg = <0x000000 0x010000>;
47 read-only;
48 };
49
50 info: partition@10000 {
51 label = "info";
52 reg = <0x010000 0x010000>;
53 read-only;
54 };
55
56 partition@20000 {
57 compatible = "denx,uimage";
58 label = "firmware";
59 reg = <0x020000 0xe30000>;
60 };
61
62 partition@e50000 {
63 label = "tplink";
64 reg = <0xe50000 0x1a0000>;
65 read-only;
66 };
67
68 art: partition@ff0000 {
69 label = "art";
70 reg = <0xff0000 0x010000>;
71 read-only;
72 };
73 };
74 };
75 };
76
77 &eth0 {
78 nvmem-cells = <&macaddr_info_8>;
79 nvmem-cell-names = "mac-address";
80 mac-address-increment = <1>;
81 };
82
83 &eth1 {
84 nvmem-cells = <&macaddr_info_8>;
85 nvmem-cell-names = "mac-address";
86 };
87
88 &wmac {
89 mtd-cal-data = <&art 0x1000>;
90
91 nvmem-cells = <&macaddr_info_8>;
92 nvmem-cell-names = "mac-address";
93 };
94
95 &info {
96 compatible = "nvmem-cells";
97 #address-cells = <1>;
98 #size-cells = <1>;
99
100 macaddr_info_8: macaddr@8 {
101 reg = <0x8 0x6>;
102 };
103 };