target/linux/ath79/dts/qca9558_ocedo_koala.dts

   1 // SPDX-License-Identifier: GPL-2.0-or-later OR MIT
   2
   3 #include "qca955x.dtsi"
   4
   5 #include <dt-bindings/gpio/gpio.h>
   6 #include <dt-bindings/input/input.h>
   7
   8 / {
   9         compatible = "ocedo,koala", "qca,qca9558";
  10         model = "OCEDO Koala";
  11
  12         aliases {
  13                 led-boot = &led_system;
  14                 led-failsafe = &led_system;
  15                 led-running = &led_system;
  16                 led-upgrade = &led_system;
  17                 label-mac-device = &eth0;
  18         };
  19
  20         leds {
  21                 compatible = "gpio-leds";
  22
  23                 power {
  24                         label = "green:power";
  25                         gpios = <&gpio 22 GPIO_ACTIVE_LOW>;
  26                         default-state = "on";
  27                 };
  28
  29                 wifi2 {
  30                         label = "yellow:wlan2";
  31                         gpios = <&gpio 23 GPIO_ACTIVE_LOW>;
  32                         linux,default-trigger = "phy1tpt";
  33                 };
  34
  35                 wifi5 {
  36                         label = "red:wlan58";
  37                         gpios = <&gpio 13 GPIO_ACTIVE_LOW>;
  38                         linux,default-trigger = "phy0tpt";
  39                 };
  40
  41                 led_system: system {
  42                         label = "blue:sys";
  43                         gpios = <&gpio 19 GPIO_ACTIVE_LOW>;
  44                 };
  45         };
  46
  47         keys {
  48                 compatible = "gpio-keys";
  49
  50                 reset {
  51                         label = "reset";
  52                         linux,code = <KEY_RESTART>;
  53                         gpios = <&gpio 17 GPIO_ACTIVE_LOW>;
  54                 };
  55         };
  56 };
  57
  58 &pcie0 {
  59         status = "okay";
  60 };
  61
  62 &spi {
  63         status = "okay";
  64
  65         flash@0 {
  66                 compatible = "jedec,spi-nor";
  67                 reg = <0>;
  68                 spi-max-frequency = <50000000>;
  69
  70                 partitions {
  71                         compatible = "fixed-partitions";
  72                         #address-cells = <1>;
  73                         #size-cells = <1>;
  74
  75                         uboot: partition@0 {
  76                                 label = "u-boot";
  77                                 reg = <0x000000 0x040000>;
  78                                 read-only;
  79                         };
  80
  81                         partition@40000 {
  82                                 label = "u-boot-env";
  83                                 reg = <0x040000 0x010000>;
  84                         };
  85
  86                         partition@50000 {
  87                                 /* Dual-Flash layout combined */
  88                                 compatible = "denx,uimage";
  89                                 label = "firmware";
  90                                 reg = <0x050000 0xe80000>;
  91                         };
  92
  93                         partition@ed0000 {
  94                                 label = "data";
  95                                 reg = <0xed0000 0x110000>;
  96                                 read-only;
  97                         };
  98
  99                         partition@fe0000 {
 100                                 label = "id";
 101                                 reg = <0xfe0000 0x010000>;
 102                                 read-only;
 103                         };
 104
 105                         art: partition@ff0000 {
 106                                 label = "art";
 107                                 reg = <0xff0000 0x010000>;
 108                                 read-only;
 109                         };
 110                 };
 111         };
 112 };
 113
 114 &wmac {
 115         status = "okay";
 116
 117         mtd-cal-data = <&art 0x1000>;
 118         nvmem-cells = <&macaddr_art_6>;
 119         nvmem-cell-names = "mac-address";
 120 };
 121
 122 &mdio0 {
 123         status = "okay";
 124
 125         phy5: ethernet-phy@5 {
 126                 reg = <5>;
 127                 eee-broken-100tx;
 128                 eee-broken-1000t;
 129         };
 130 };
 131
 132 &eth0 {
 133         status = "okay";
 134
 135         nvmem-cells = <&macaddr_art_0>;
 136         nvmem-cell-names = "mac-address";
 137
 138         phy-handle = <&phy5>;
 139         phy-mode = "rgmii-rxid";
 140
 141         pll-data = <0x8e000000 0x80000101 0x80001313>;
 142 };
 143
 144 &art {
 145         compatible = "nvmem-cells";
 146         #address-cells = <1>;
 147         #size-cells = <1>;
 148
 149         macaddr_art_0: macaddr@0 {
 150                 reg = <0x0 0x6>;
 151         };
 152
 153         macaddr_art_6: macaddr@6 {
 154                 reg = <0x6 0x6>;
 155         };
 156 };