target/linux/ath79/dts/qca9558_ocedo_koala.dts

   1 // SPDX-License-Identifier: GPL-2.0-or-later OR MIT
   2
   3 #include "qca955x.dtsi"
   4
   5 #include <dt-bindings/gpio/gpio.h>
   6 #include <dt-bindings/input/input.h>
   7
   8 / {
   9         compatible = "ocedo,koala", "qca,qca9558";
  10         model = "OCEDO Koala";
  11
  12         aliases {
  13                 led-boot = &led_system;
  14                 led-failsafe = &led_system;
  15                 led-running = &led_system;
  16                 led-upgrade = &led_system;
  17                 label-mac-device = &eth0;
  18         };
  19
  20         leds {
  21                 compatible = "gpio-leds";
  22
  23                 power {
  24                         label = "green:power";
  25                         gpios = <&gpio 22 GPIO_ACTIVE_LOW>;
  26                         default-state = "on";
  27                 };
  28
  29                 wifi2 {
  30                         label = "yellow:wlan2";
  31                         gpios = <&gpio 23 GPIO_ACTIVE_LOW>;
  32                         linux,default-trigger = "phy1tpt";
  33                 };
  34
  35                 wifi5 {
  36                         label = "red:wlan58";
  37                         gpios = <&gpio 13 GPIO_ACTIVE_LOW>;
  38                         linux,default-trigger = "phy0tpt";
  39                 };
  40
  41                 led_system: system {
  42                         label = "blue:sys";
  43                         gpios = <&gpio 19 GPIO_ACTIVE_LOW>;
  44                 };
  45         };
  46
  47         keys {
  48                 compatible = "gpio-keys";
  49
  50                 reset {
  51                         label = "reset";
  52                         linux,code = <KEY_RESTART>;
  53                         gpios = <&gpio 17 GPIO_ACTIVE_LOW>;
  54                 };
  55         };
  56 };
  57
  58 &pcie0 {
  59         status = "okay";
  60 };
  61
  62 &spi {
  63         status = "okay";
  64
  65         flash@0 {
  66                 compatible = "jedec,spi-nor";
  67                 reg = <0>;
  68                 spi-max-frequency = <50000000>;
  69
  70                 partitions {
  71                         compatible = "fixed-partitions";
  72                         #address-cells = <1>;
  73                         #size-cells = <1>;
  74
  75                         uboot: partition@0 {
  76                                 label = "u-boot";
  77                                 reg = <0x000000 0x040000>;
  78                                 read-only;
  79                         };
  80
  81                         partition@40000 {
  82                                 label = "u-boot-env";
  83                                 reg = <0x040000 0x010000>;
  84                         };
  85
  86                         partition@50000 {
  87                                 compatible = "denx,uimage";
  88                                 label = "firmware";
  89                                 reg = <0x050000 0x740000>;
  90                         };
  91
  92                         partition@790000 {
  93                                 label = "vendor";
  94                                 reg = <0x790000 0x740000>;
  95                                 read-only;
  96                         };
  97
  98                         partition@ed0000 {
  99                                 label = "data";
 100                                 reg = <0xed0000 0x110000>;
 101                                 read-only;
 102                         };
 103
 104                         partition@fe0000 {
 105                                 label = "id";
 106                                 reg = <0xfe0000 0x010000>;
 107                                 read-only;
 108                         };
 109
 110                         art: partition@ff0000 {
 111                                 label = "art";
 112                                 reg = <0xff0000 0x010000>;
 113                                 read-only;
 114                         };
 115                 };
 116         };
 117 };
 118
 119 &wmac {
 120         status = "okay";
 121
 122         mtd-cal-data = <&art 0x1000>;
 123         nvmem-cells = <&macaddr_art_6>;
 124         nvmem-cell-names = "mac-address";
 125 };
 126
 127 &mdio0 {
 128         status = "okay";
 129
 130         phy5: ethernet-phy@5 {
 131                 reg = <5>;
 132                 eee-broken-100tx;
 133                 eee-broken-1000t;
 134         };
 135 };
 136
 137 &eth0 {
 138         status = "okay";
 139
 140         nvmem-cells = <&macaddr_art_0>;
 141         nvmem-cell-names = "mac-address";
 142
 143         phy-handle = <&phy5>;
 144         phy-mode = "rgmii-rxid";
 145
 146         pll-data = <0x8e000000 0x80000101 0x80001313>;
 147 };
 148
 149 &art {
 150         compatible = "nvmem-cells";
 151         #address-cells = <1>;
 152         #size-cells = <1>;
 153
 154         macaddr_art_0: macaddr@0 {
 155                 reg = <0x0 0x6>;
 156         };
 157
 158         macaddr_art_6: macaddr@6 {
 159                 reg = <0x6 0x6>;
 160         };
 161 };